so i bought a busted up RP1 from ebay and the screen back glass was smashed
i already fixed the front screen and its up and operational now but i cant find anything for the fingerprint sensor
does anyone know where i could buy this ?
Related
Hello. I have had a galaxy s3 with cracked glass and tried to replace it. I have seen many videos on youtube how to replace it. Basically people on these videos heat the screen and then remove the front glass easily, because the digitizer is glued to the lcd. But when I tried to remove it it came off quite easily, but only then I noticed that the digitizer was glued not to the lcd but to the front glass, so when i tried to remove front glass I accidentally broke the digitiser connector and somehow damaged the lcd. You can see photos here:
http://i.ebayimg.com/t/Samsung-galaxy-S-III-/00/s/MTYwMFg5MDE=/z/N0AAAOxylpNTUq5H/$_58.JPG
http://i.ebayimg.com/t/Samsung-galaxy-S-III-/00/s/MTYwMFg5MDE=/z/QREAAMXQ74JTUq67/$_58.JPG (in this photo you can see that the digitizer was glued to the front glass very strongly)
I would like to ask, do you know why the digitizer could have been glued to the front glass but not to the lcd? And why the lcd could have been damaged while removing front glass??
I would really wanna know the answer myself, as I ordered one that should have reached yesterday, but as they do not work on weekends, it will be here tommorow, and I don't wanna brake my display forever, especially because mine is not that damaged.
Any ideas?
my advice don't bother with a glass replacement. I HAVE TRIED TWICE and as the op said the digitizer is glued to the front glass. this has been the case with both the original screen and two replacement lcd/digitizer/glass assemblies that i personally took apart. each time the glass was fused to the digitizer . i used a heat gun and a laser thermometer and still i failed. I was successful replacing the whole screen assembly twice . but those cost about $130 from amazon,com. These replacements may seem at first like oem but the ones i got cracked very easily. they dont use the gorilla glass and the quality is not as good. one replacement was really bad in sunlight. could not see anything. after my screen cracked a third time i got a galaxy s 5 . and started using a case and screen protector.
Hey buddies, The screen of my phone got breked. Touch is working. i can use the phone. Is there anyone who knows how to replace the LCD Screen glass and where to find the glass?
https://www.amazon.com/MOTOROLA-Mot...506525321&sr=8-12&keywords=moto+g4+plus+glass for the hard replacement but cheaper, OR
https://www.amazon.com/ePartSolution_OEM-Motorola-Digitizer-Assembly-Replacement/dp/B0713SWNFJ for more expensive but easier drop-in replacement
https://www.youtube.com/watch?v=8Yu7HpzQU2I shows how difficult it is to replace just the glass of the phone
Don't expect Gorilla Glass 3 like OEM but more like cheap glass so next drop, will break again.
My touch is working fine is it possible to replace only front glass
Shreeram02 said:
My touch is working fine is it possible to replace only front glass
Click to expand...
Click to collapse
Just opt for a tempered glass screen protector. The front glass itself is the touch and it comes in combo with the display.
Shreeram02 said:
My touch is working fine is it possible to replace only front glass
Click to expand...
Click to collapse
Order touch screen digitizer from maxbhi
but it's not assure that it will be replaced properly. Better you buy the complete unit with display.
shanved said:
Order touch screen digitizer from maxbhi
but it's not assure that it will be replaced properly. Better you buy the complete unit with display.
Click to expand...
Click to collapse
Bro My friend who is Owning the Mi service centre in the city. He cuted the glass from touchpad of my original screen and I bought only the glass of new screen and he attached new glass to the touchpad and it is now perfectly working
Boys can you send me link with new screen and Frame because I buy from AliExpress and the quality is poor and not working perfectly
Can u send the link from where u got front glass sir?
May be this will help someone digitizer on ebay
It's not easy to repair only digitizer from a screen....if someone can help us with the link to buy new set screen digitizer together I feel grateful
So, I was wondering how to separate the fingerprint scanner from the camera glass module. I ordered different color (red) back cover with camera glass because mine broke, so i need only the fingerprint module to put under the new glass?
Any ideas will help me a lot.
Hello, I’ve cracked my Screen on my Mate 20 pro, I’ve ordered my a replacement (not cheap) but can’t find the adhesive for the front LCD... I ordered the Rear glass adhesive... does anyone know if they are the same? Or would I be best just using B-7000 to glue the screen back?
Thanks pigbait