i have problem with amazfit pace. when i scan the qr code " watch bluetooth is off, scan again in 5 min" I have try several time but still same problem occur. Any idea guys? have anyone encounter same problem like mine?
apokjoker85 said:
i have problem with amazfit pace. when i scan the qr code " watch bluetooth is off, scan again in 5 min" I have try several time but still same problem occur. Any idea guys? have anyone encounter same problem like mine?
Click to expand...
Click to collapse
Try a factory reset? or is that why you are getting the QR Code?
Amazfit Pace - Faq
www.amazfit.com
Related
Hi guys,
since I updated my Amazfit Pace to firmware version 1.3.7 I not able to connect via Bluetooth. My Amazfit is not showing up if I´m searching for bluetooth devices near to my phone. I tried it with a android and iOS device. If I´m searching for devices on my amazfit than it shows up my smartphones.
Did anyone know this issue? Is it possible to enable / disable BT on my Amazfit Pace?
Regards,
Tobi
I think the watch is only discoverable when the QR code is shown. So i think you can try a factory reset, to get it to reboot and show the QR code and scan it with the app and re pair to your phone. Also while it factory resets unpair it from the phone, from settings and app.
The watch is never "discoverable", that's why you use the QR code to pair, and only then it shows in phone's BT settings.
Are you using a custom ROM on your phone? Try a reboot on your phone and your watch again. I had the same problem as you and I've found that my phone was the problem, seemed like my device wasn't acutally enabling bluetooth therefore it couldn't connect to the watch.
Same problem for me too
After updated to 1.3.7
Not discoverable in phone Bluetooth settings
Unpaired in watch app & forget in phone Bluetooth settings
After factory reset the watch
Not able to pair
Showing message like
Bluetooth on watch is turn off
Please try again later
If anyone found the solution help me out
Shiva Chandran said:
Same problem for me too
After updated to 1.3.7
Not discoverable in phone Bluetooth settings
Unpaired in watch app & forget in phone Bluetooth settings
After factory reset the watch
Not able to pair
Showing message like
Bluetooth on watch is turn off
Please try again later
If anyone found the solution help me out
Click to expand...
Click to collapse
Try this:
https://forum.xda-developers.com/showpost.php?p=76680707&postcount=19
lfom said:
Try this:
https://forum.xda-developers.com/showpost.php?p=76680707&postcount=19
Click to expand...
Click to collapse
Unpaired
Factory reset
Watch Bluetooth is not showing in both android 6.0 and iOS 11.3
Scan tge QR code
“Bluetooth on watch is turn off,
Try again later “
This message only comes
Shiva Chandran said:
Unpaired
Factory reset
Watch Bluetooth is not showing in both android 6.0 and iOS 11.3
Scan tge QR code
“Bluetooth on watch is turn off,
Try again later “
This message only comes
Click to expand...
Click to collapse
This started after you updated the watch to 1.3.7? This is weird... You can try downloading a Chinese version of Amazfit app, some people reported that they could pair using this version in cases like yours...
lfom said:
This started after you updated the watch to 1.3.7? This is weird... You can try downloading a Chinese version of Amazfit app, some people reported that they could pair using this version in cases like yours...
Click to expand...
Click to collapse
I tried with Chinese Amazfit app also lastest and 1.7.0 version also not working for me
toto1988 said:
Hi guys,
since I updated my Amazfit Pace to firmware version 1.3.7 I not able to connect via Bluetooth. My Amazfit is not showing up if I´m searching for bluetooth devices near to my phone. I tried it with a android and iOS device. If I´m searching for devices on my amazfit than it shows up my smartphones.
Did anyone know this issue? Is it possible to enable / disable BT on my Amazfit Pace?
Regards,
Tobi
Click to expand...
Click to collapse
AmazfitPAce Tuner APK v1.1 - allow to enable/disable Bluetooth.
Thanks. This worked!
lfom said:
Try this:
https://forum.xda-developers.com/showpost.php?p=76680707&postcount=19
Click to expand...
Click to collapse
Turning Airplane mode on for the watch, reinstalling the Amazfit Verge app, then turning Airplane mode on, indeed prompted the pair request with the pair codes on both the phone and watch. Thanks for the help! I wasn't about to factory reset my watch if I didn't have to.
What I Did and works
Hi,
I have tried some topics from internet but nok.
I did these above steps and work for me:
1- Turn watch to airplane mode;
2- Clear bluetooth cache and data (Android/ IOS). It's not necessary to remove the watch from bluetooth devices list.
3- Reinstalling the Amazfit app;
4- Turn off the airplane mode (watch).
5- Done! Make login in the Amazfit app and both devices will be sync data now.
cabaltom said:
Turning Airplane mode on for the watch, reinstalling the Amazfit Verge app, then turning Airplane mode on, indeed prompted the pair request with the pair codes on both the phone and watch. Thanks for the help! I wasn't about to factory reset my watch if I didn't have to.
Click to expand...
Click to collapse
Hello,
Two days ago, I completed a bicycle ride of 43.37 km, while recording the activity with my Amazfit Stratos. Today, I connected to the Amazfit Watch app in my phone to sync my activities (Normally, I have my Stratos in Airplane mode in order to save battery and connect to my phone once every two or three days). To my surprise, this one (made on 2018-08-27) was not shown in my activities page in the Amazfit Watch app. I have to note, that another short ride that I made the day after (on 2018-08-28) of 10.09 km is shown in the app. Also, this discrepancy appears on the total mileage (in the app) versus the sports history (on the watch) readings (the former shows 662, 85 km, while the latter shows 706,07 km). Of course, the 43.37 km ride is shown on my Stratos.
I tried a few things to bring this activity to the cloud, like closing and reopening the Amazfit Watch app, rebooting the watch, but nothing helped.
I must also note that, while connecting today, the watch updated to the latest version. I don't know if that had an effect on syncing.
Does anyone have any suspicion on why is this happening and how can I correct this?
I have also submitted a question to Amazfit support page and I am waiting for their response.
Thank you,
Evangelos
Hi,
I have the same issue. The activity and sleep info are not displayed in Amazfit Stratos since I have updated the device the last weekend.
Do you have received any answer from Amazfit support?.
Thanks.
iscario said:
Hi,
I have the same issue. The activity and sleep info are not displayed in Amazfit Stratos since I have updated the device the last weekend.
Do you have received any answer from Amazfit support?.
Thanks.
Click to expand...
Click to collapse
I received the following reply from Amazfit support:
"Please go to your phone Bluetooth settings to cache Bluetooth cache, toggle Bluetooth OFF and ON, reboot the watch and phone, log out and then re-open app and try connecting again.
If your issue persists, please connect wifi on the watch and go to more settings---upload. Tap upload on the watch to upload data to Amazfit Watch app and open your app to sync. Then unpair the device from your phone and re-pair it to have a try."
I tried the first method, but it didn't work. Then, I proceeded to the second method of manual uploading data, which remedied the problem. I suspect that it is not necessary to unpair and re-pair the watch - I think that a log-out and log-in will do the job. If you follow this technique, after uploading data, try to log-out and log-in again and check your activity in the app to see if everything is back. If not, then go for a unpair-re-pair process.
Hope this helped.
keneva said:
I received the following reply from Amazfit support:
"Please go to your phone Bluetooth settings to cache Bluetooth cache, toggle Bluetooth OFF and ON, reboot the watch and phone, log out and then re-open app and try connecting again.
If your issue persists, please connect wifi on the watch and go to more settings---upload. Tap upload on the watch to upload data to Amazfit Watch app and open your app to sync. Then unpair the device from your phone and re-pair it to have a try."
I tried the first method, but it didn't work. Then, I proceeded to the second method of manual uploading data, which remedied the problem. I suspect that it is not necessary to unpair and re-pair the watch - I think that a log-out and log-in will do the job. If you follow this technique, after uploading data, try to log-out and log-in again and check your activity in the app to see if everything is back. If not, then go for a unpair-re-pair process.
Hope this helped.
Click to expand...
Click to collapse
Solved after uninstalling Amazfit app 2 times and clean cache.
Thank you very much for your help.
Hi buddies.
Yesterday I see my Verge not sync completely with the Amazfit App (Android). The app say that some data not is possible to sync. In the same day, a OTA update is appear in the app, and in a few hours later I update the watch but the problem persist. Today I try to unpair the watch from the app but then not is possible to pair again, when the watch appear the Bluetooth code and press OK, the watch restart again in the QR code. I try to login in the Amazfit app with another account and nothing.
Anybody with the same problem?? The watch not be able to use in this state.
I have managed to pair it, but the problem of incomplete synchronization with the app persists...
Hi all,
Since some days the AGPS data from watch is not updating anymore. I have synced several times. Does anyone else have the same problem? Any idea how to fix this? :crying:
Kind Regards
Christian
Hello ! Same problem for me since one week : AGPS is expired, and sync with Amazfit Android app doesn't fox the issue. I've already reset the app and the watch, with no change...
AGPS sync problem
slayne1 said:
Hello ! Same problem for me since one week : AGPS is expired, and sync with Amazfit Android app doesn't fox the issue. I've already reset the app and the watch, with no change...
Click to expand...
Click to collapse
Hello, I have same problem.
I have factory restarted the watch 4 or 5 times, i uninstall and install the app and still nothing!?
Since the AGPS want sync i have very bad GPS recorded running activity.
Please help?
For Android Only.
Uninstall Amazfit Watch App [3.xx]
Restart the Phone.
Install Amazfit Watch App [Downgrade to 2.7x or 2.9x by manual install APK]
Again pairing and A-GPS can update.
Have downgraded to 2.9. Will report back on AGPS status.
Did not work.
Can I ask, can people on the forum please try a manual sync? Options -> Sync? On my Stratos, it fails at 34%. Want to see if it's something at my end, or if related to the Xiaomi server issues.
I am having the same problem with the Verge China 3.0.50.0 and App 3.6.1.
I have sync like more than 20 times and it still tell me that my AGPS data has expired.
i got same problem, i did't update for a gps on amazfit pace
maybe, xiaomi server is update
Seems ok today.
When you pull down the sync you will see the sync progress (%). The the first count will go to 90% and finish. Then it will reset to 10% and count to 90% then finish.
Previously the 2nd count sync will stuck at 10% for a while and stop.
Sometimes I have the message "AGPS has expired" on my Amazfit Pace when I launch a session using GPS.
To solve it I connect to Zepp application, synchronize the datas and generally the problem with AGPS is solved
But today impossible to solve this problem "AGPS has expired " on my Amazfit Pace
Can anyone explain me clearly how can I solve it ?
Kind regards