Related
Hello,
I need rom suggestion(in terms of battery life and performance). I have used Cloudy G2 3.3 with dorimanx. It is a good rom, but sometimes the phone freeze. I also used RESURRECTION REMIX M but this rom has some bugs.
Best regards,
Uri
Deperate ROM now is the best ... you won't regret
http://forum.xda-developers.com/lg-g2/development/rom-desperate-rom-t3437472
CM13
OptimusG3. Best there is best there was best there ever will be
calbertoferreira said:
CM13
Click to expand...
Click to collapse
I have used this in the past, the worst rom I ever used.
metteduch said:
OptimusG3. Best there is best there was best there ever will be
Click to expand...
Click to collapse
But it is kitkat... Why not lollipop?
CM13 is Marshmallow.
calbertoferreira said:
CM13 is Marshmallow.
Click to expand...
Click to collapse
It has issue of fast charging .. it shows slow charging while i am connected to 2a charger..
Is just a cosmetic bug, it shows the text "Slow Charging" but charges normally.
calbertoferreira said:
Is just a cosmetic bug, it shows the text "Slow Charging" but charges normally.
Click to expand...
Click to collapse
You using this rom in your dilay life? Can you tell a bit about is pros and cons?
sound quality and camera in all CM roms are bad
i like using edited stock roms and desperate rom is the best rom now i did try all roms
desperate rom also is the future of LG G2
battery life is great - camera u have two amazing cameras - too many editing - fast like wind - ui5 and ui4 interfaces - blurring effects - full screen caller photo and recording calls automatically if you want - etc.......
uriburg said:
You using this rom in your dilay life? Can you tell a bit about is pros and cons?
Click to expand...
Click to collapse
I'm using it as my daily rom on my main and only device.
I'm using the latest release with gapps, customized the gapps installation to remove some apps i don't use.
The battery life is a lot better than stock, it's fast (no hiccups).
I don't think the sound is bad, at least with earphones and during calls, the phone rings louder but it distorts a bit.
The camera is worse in low light, if you take photos with good light you won't notice much difference imho.
Take a look at this picture taken this monday with snap (http://i.imgur.com/yMpKMuF.jpg).
I have two issues that i don't know yet if they are related to CM13 or my account:
- Gmail labels are grey after setup. I have to change a label colour, go to all mail to fix it.
- My Android doesn't show in Android device manager.
So i recommend it.
Yes
Sent from my SM-N920T using Tapatalk
I am using Resurrection Remix M for almost 2 months with best battery life.
https://youtu.be/zYaYQYKNsfc
Gesendet von meinem LG-D802 mit Tapatalk
Is MIUI 7 a good rom?
calbertoferreira said:
uriburg said:
It has issue of fast charging .. it shows slow charging while i am connected to 2a charger..
Click to expand...
Click to collapse
Is just a cosmetic bug, it shows the text "Slow Charging" but charges normally.
Click to expand...
Click to collapse
Correct, just seems to be a cosmetic bug. Even though it says it would be charging slowly on the CM13 lock screen, it actually seems to be charging just as fast as with the stock Lollipop ROM.
calbertoferreira said:
The battery life is a lot better than stock,
Click to expand...
Click to collapse
Wrong. The battery life on CM13 is worse compared to stock Lollipop.
With stock Lollipop the battery drained almost nothing on standby, with CM13 the battery is draining on standby.
Also, with stock Lollipop the phone never became warm during light usage. With CM13 the phone is getting noticeably warm even during light usage.
calbertoferreira said:
it's fast (no hiccups).
Click to expand...
Click to collapse
Correct.
calbertoferreira said:
I don't think the sound is bad
Click to expand...
Click to collapse
Correct.
calbertoferreira said:
The camera is worse in low light, if you take photos with good light you won't notice much difference imho.
Click to expand...
Click to collapse
Correct.
calbertoferreira said:
I have two issues that i don't know yet if they are related to CM13 or my account:
- My Android doesn't show in Android device manager.
Click to expand...
Click to collapse
Settings -> Security -> Device administrators -> Android Device Manager -> Activate
?
Can you tell me which kernel support g2 f320 lolipop 5.0.1 or 6.0 MM. Thank
I am using rom NDM 2.5 , this rom i get antutu 49000, great, blissrom 6.4 have poin too. It so fast
I have one question in regards to CM13.
I used it for like a day and it's blazing fast in general use but in games like Asphalt 8 (I just use it as a "benchmark") it stutters and it seems that 3d performance is worse. I later found out that you can set the phone in performance mode which fixes stutters but then all my cores are at 100% and I don't wanna melt the phone and battery.
So is this common with you guys as well? And is there some sort of a fix? Switching to performance mode and back is kinda annoying.
CM13 also lacks video modes like 4K,60fps and 120 fps slow-mo recording.
I am using CandySix 6.0.1 + Kernel from DU
http://yairworkshop.com/index.php/2016/08/23/romcandysix-d800-d802aospcmte/
A little review in foreign language but you can have some idea.
https://www.youtube.com/watch?v=1EuEKxJ3AaY
I am on desperate rom
Great rom, but only issue is high temperature (light and heavy use). Dont know if others users experience the same. I looking for another rom too. Not to many choices since i have a f320k (korean version). Most roms are 4 d800/1/2/3/4/5. Sucks!!!!
I am not responsible for bricked devices, dead SD cards, explosions, wars, broken phone or charger, or you getting fired because the alarm application failed, Please read the first 2 posts carefully before deciding to install this app.
This is my new app to control charging current on Redmi Note 3 (Snapdragon) , to use this app you must be on any 6.0.1 or 7.1.1 rom, this will not work on 5.1.1 roms. The app is compatible with all kernels including stock cm kernel. Increasing charge rate is not always effective because of hardware limitations, but decreasing it below 2000 works very effectively.
Usage Instructions -
Install the kenzo charge control app
Open the app and wait for it to set permissions
Enter charge rate value and click set rate button
Enjoy your custom charge rate
Important Information -
Don't use very high values, prefer to stay below 2500 mA current
Compatible only with RN3(Snapdragon) and only with CM/ASOP roms
There is no apply on boot option yet, I'm little lazy to add that
Downloads -
Kenzo Charge Control V1.1
XDA:DevDB Information
Kenzo Charge Control, Device Specific App for the Xiaomi Redmi Note 3
Contributors
Umang96
Version Information
Status: Stable
Created 2016-08-28
Last Updated 2016-08-28
Changelogs -
V1.1 -
Fixed some force closes on clicking buttons before permissions are set
Compatible with all official cm/aosp based roms and kernels
V1.0 -
Initial version for kenzo
Blaze kernel + hexagon ROM ; when i press check rate i always get " still setting permissions " even though i wait for more than 30s
aaz03 said:
Blaze kernel + hexagon ROM ; when i press check rate i always get " still setting permissions " even though i wait for more than 30s
Click to expand...
Click to collapse
Make sure your charger is not plugged it, it should work then, if still not working then try with my kernel, it works fine for me.
Are you gonna release version for miui based Roms?
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka
Umang96 said:
I am not responsible for bricked devices, dead SD cards, explosions, wars, broken phone or charger, or you getting fired because the alarm application failed, Please read the first 2 posts carefully before deciding to install this app.
This is my new app to control charging current on Redmi Note 3 (Snapdragon) , to use this app you must be on any cm or aosp rom, this will not work on miui roms. The app is compatible with all kernels including stock cm kernel. Increasing charge rate is not effective because of hardware limitations, but decreasing it below 2000 works very effectively.
Usage Instructions -
Install the kenzo charge control app
Open the app and wait for it to set permissions
Enter charge rate value and click set rate button
Enjoy your custom charge rate
Important Information -
Don't use very high values, prefer to stay below 2500 mA current
Compatible only with RN3(Snapdragon) and only with CM/ASOP roms
There is no apply on boot option yet, I'm little lazy to add that
Downloads -
Kenzo Charge Control V1.1
XDA:DevDB Information
Kenzo Charge Control, Device Specific App for the Xiaomi Redmi Note 3
Contributors
Umang96
Version Information
Status: Stable
Created 2016-08-28
Last Updated 2016-08-28
Click to expand...
Click to collapse
By this, can I charge my mobile faster?
Sent from my Redmi Note 3 using Tapatalk
ShadowLeaf said:
By this, can I charge my mobile faster?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Yes if you are on a qc enabled kernel
Kenzo Charge Control V1.1 works fine on Radon V2.5.1. Thank you.
Hey @Umang96 I would like to know what are the benefits of limiting the charging rate? Better battery life? I want to understand what's the use of the app-
Decreasing charge rate than what's set by default is not a very wise thing to do.
Xiaomi set 2A as the default max allowed input charge, also hardware is also limited to that, that's the reason your device charges quickly from 0-35%. After it slows down as current in battery has also increased so overall Potential difference has decreased which results in long hours of charging.
Decreasing charge rate is not logical as it would not allow to charge efficiently after a certain period time when say when you reach 90%. As the max current is now capped at lower rates so less charge will go inside the battery and thus making it difficult for the charger to charge. Tweaking what's already set to the optimal settings is not a good idea. Xiaomi did what it could to charge this humongous battery.
But in the end it's the call of the users
rodsayd said:
Hey @Umang96 I would like to know what are the benefits of limiting the charging rate? Better battery life? I want to understand what's the use of the app-
Click to expand...
Click to collapse
I don't know, some users fear high charging rates or heat, users like to change charge rate, thats why I made the app, personally I use default 2A only.
This thread seems to attract more criticism than support, I just made the app for user demands, I don't even use it myself and I don't even get anything by it, I didn't make this thread to attract free criticism and spoil my day, I just tried to contribute something for some users who wanted charge rate control. I don't want to continue this now, link will still stay in op if anyone needs it, thread closed.
Can i use it for miui ??
what if my phone blasts ?
what is the safe charge rate ?
jenebarve11 said:
what if my phone blasts ?
what is the safe charge rate ?
Click to expand...
Click to collapse
Don't cross 2000 ... And dont worry ur phone want blast.. if its too hot then it will get automatically switch off..!!
panu09 said:
Don't cross 2000 ... And dont worry ur phone want blast.. if its too hot then it will get automatically switch off..!!
Click to expand...
Click to collapse
Actually i am using 2400 mah and if using 2400 is hazardous then what's the point of using that feature in the kernel ?
jeneb11 said:
Actually i am using 2400 mah and if using 2400 is hazardous then what's the point of using that feature in the kernel ?
Click to expand...
Click to collapse
It is recommended to not cross 2200... Try at ur risk... But i guess it doesn't make actually a difference in charging time...so be careful..!!
Official LineageOS14.1 0131can't work,fc…
Chris_Wang said:
Official LineageOS14.1 0131can't work,fc…
Click to expand...
Click to collapse
same here NOS
@Umang96 any way to fix it?
Not asop
Its asop
??
I too lazy to check what you write
Thx for this great app
hello everyone
i had 1 issue that i still don't know the solution.why my phone charging so slow on aosp based rom (like aex 4.4,lineageos 14.1,etc) only 750mA show on ampere.But when i go back to miui based rom it charging very well more like 1940A.can you help me to find the solution?,because miui interface are like sh*t for me
Yea I use every Nougat ROM but very slow charging if I want fast charge I always edit my thermal engine I hope someone build kernel and add feature fast charge ..
Maybe you can try Oreo ROM charger its normal 2Hours from 10%-100
Hi guys,
I'm a new Poco user. I've checked out the forums and saw lots of ROMs, Kernels and even Recovery software. I'm a bit overwhelmed for the first time as I'm liking stock MIUI 10 for now. Can someone enlighten me on which ROM has the most features, what ROM is the most stable, which kernels go best with which?
Stability: BaikalOS, Pixel Experience
Powersave: BaikalOS
Customizability / Extra Features: Resurrection Remix, crDroid, Havoc-OS / POSP
Performance: Nitrogen OS, crDroid
Pixel Like: Havoc-OS, Pixel Experience
These are the ones I know but haven't tested all of them. Tell me if I'm missing any.
menfie said:
Stability: BaikalOS, Pixel Experience
Powersave: BaikalOS
Customizability / Extra Features: Resurrection Remix, crDroid, Havoc-OS / POSP
Performance: Nitrogen OS, crDroid
Pixel Like: Havoc-OS, Pixel Experience
These are the ones I know but haven't tested all of them. Tell me if I'm missing any.
Click to expand...
Click to collapse
Wow thanks. Does BaikalOS have the app cloning feature? How good is the battery life compared to MIUI 10?
best kernels
Sphinx and Franco kernel
Best roms
Lineage and stock
Stock is of course the most stable, but the beta builds always have bugs they always remove settings add settings fix something break something.
hakkai999 said:
Wow thanks. Does BaikalOS have the app cloning feature? How good is the battery life compared to MIUI 10?
Click to expand...
Click to collapse
It doesn't have the app cloning and battery life is a lot better if you manage the background apps strictly but you still have to install it and test it yourself.
---------- Post added at 12:50 PM ---------- Previous post was at 12:46 PM ----------
pingufanpoy said:
best kernels
Sphinx and Franco kernel
Best roms
Lineage and stock
Stock is of course the most stable, but the beta builds always have bugs they always remove settings add settings fix something break something.
Click to expand...
Click to collapse
There is no best rom or best kernel, it all comes down to personal preference...
Lineage Pie with Franco kernel.
..and go with pixel experience only if u r into very stock version which I think is overrated given its customization limitations.
I have always hated chinese ROMs or apps, take MIUI for example they have like hundreds of apps injected into core system (miui security, miui contacts, miui dialer, miui messaging, miui this that and what not...)
pingufanpoy said:
best kernels
Sphinx and Franco kernel
Best roms
Lineage and stock
Stock is of course the most stable, but the beta builds always have bugs they always remove settings add settings fix something break something.
Click to expand...
Click to collapse
Do you know if Lineage OS has the signal issue fixed on it? I only really moved away from it because of that. Im on crDroid and my signal is much better now
hakkai999 said:
Wow thanks. Does BaikalOS have the app cloning feature? How good is the battery life compared to MIUI 10?
Click to expand...
Click to collapse
Hey my fellow filipino , i am flashaholic and i loved cynogenmod until lineage16 very much ..but this im on stock open beta rom 9.1.24 which has Good battery life for gaming because i played a lot , no touch issue ever since day one my poco was one of the initial released manufacturing date was on july ,graphics is so smooth when playing pubg settings are HDR+extreme+60fps.. This rom has been tested very much by me.. by the way it's up to you buddy it's your decision.:good:
bamz1117 said:
Hey my fellow filipino , i am flashaholic and i loved cynogenmod until lineage16 very much ..but this im on stock open beta rom 9.1.24 which has Good battery life for gaming because i played a lot , no touch issue ever since day one my poco was one of the initial released manufacturing date was on july ,graphics is so smooth when playing pubg settings are HDR+extreme+60fps.. This rom has been tested very much by me.. by the way it's up to you buddy it's your decision.:good:
Click to expand...
Click to collapse
Hi fellow Flip! Yeah I went with Ambasidii rom based on stock MIUI since I need the cloned app feature for ROM (Slave priest). It's rooted and has derp kernel. Battery life is quite a lot better. I was redownloading all my apps overnight and it only drained about 7% of battery life which is 1% more than full stock on idle without WiFi.
By the way, do you do a battery recalibration once you switch roms? Standby time is fantastic on mine but it seems to drain a little harder while playing ROM compared to stock.
hakkai999 said:
By the way, do you do a battery recalibration once you switch roms? Standby time is fantastic on mine but it seems to drain a little harder while playing ROM compared to stock.
Click to expand...
Click to collapse
There's no need to recalibrated when switching roms. Recommended calibrating your battery ( each month or every three months )
android phones this days use lithium-ion (Li-ion) or lithium-polymer (Li-po) batteries for Poco F1 . This batteries don’t need to be fully discharged, and come with smart chips that make calibration unnecessary and that's the good thing for us.
Just want to share this method , i do this all the time after switching custom roms.
First, drain your phone’s battery completely. Don’t charge it at any point while it’s draining. Let the phone keep working till it shuts itself off. Once the phone has shut itself off, restart it so it shuts off again. Even though the battery was at 0 percent, it has a few reserves left. Now, while the phone is off, charge it to 100 percent. It’s safe to use quick chargers for this, but make sure you hit 100 percent. Once it’s fully charged, unplug it and boot your phone. Android might not say it’s at 100 percent, and that’s okay. In that case, plug the charger again and let it get to 100 percent. then unplug it. This cycle of full drain and recharging lets the chip calibrate its readings with the battery’s charge cycle.
hope that helps:good:
donk165 said:
Do you know if Lineage OS has the signal issue fixed on it? I only really moved away from it because of that. Im on crDroid and my signal is much better now
Click to expand...
Click to collapse
What signal issue exactly? I'm trying Lineage at the moment and using Derp Kernel.
hakkai999 said:
What signal issue exactly? I'm trying Lineage at the moment and using Derp Kernel.
Click to expand...
Click to collapse
This thread here has a good amount of info on it.
https://forum.xda-developers.com/poco-f1/how-to/cell-signal-worse-custom-rom-t3881912
donk165 said:
This thread here has a good amount of info on it.
https://forum.xda-developers.com/poco-f1/how-to/cell-signal-worse-custom-rom-t3881912
Click to expand...
Click to collapse
Thanks mate!
Is anyone else missing the fast charging feature of the Poco while using the Pixel Experience CAF ROM? Using the Ampere app, my phone measures a really low charging current compared to that of stock MIUI. Is this an issue on other custom ROMs such as LineageOS? Any replies would be much appreciated.
There is zip that remove thermal mod you can try that. It will increase the speed
Rakibboss said:
There is zip that remove thermal mod you can try that. It will increase the speed
Click to expand...
Click to collapse
Do you have a link to the zip?
morgan757 said:
Do you have a link to the zip?
Click to expand...
Click to collapse
Found on telegram maybe..
https://bit.ly/2u6DhrG
Chrysalis Mod has been removed. I really don't know why. It was a great mod and unlocked the true potential for my poco (else it throttled like hell).
Thankfully I have a backup.
Thank you for creating this topic!
I installed a new ROM (from mod stock to LineageOS) and modules magic, put it at night for charging, and the maximum charge current is 0.5A. Since yesterday I have been looking for the source of the problem, at first I didn’t even believe the solution.
But removing this module, everything began to work fine. 94% of the battery charge and charge current min 1.2A.
Device: Samsung A520F
Solution v.2.0: problem if only in the case of a "Full" version installation. When you select the "Slim" version, everything works fine.