Has anyone successfully flashed stock firmware to one? I just got a brand new one on ebay for $65 so if I can't do it it's not a huge deal but it sure would be nice to bypass the 50% battery software lock. I've seen a couple people say they did it successfully in youtube comments and stuff but I'm not sure if they actually did or not.
If you just want to bypass battery lock, try charging via factory reset menu or download mode
jjy_0503 said:
If you just want to bypass battery lock, try charging via factory reset menu or download mode
Click to expand...
Click to collapse
Device should be here tomorrow. I will definitely give this a try. Makes sense that it would work.
jjy_0503 said:
If you just want to bypass battery lock, try charging via factory reset menu or download mode
Click to expand...
Click to collapse
Just charging while off allows it to go past 50%.
Edit: Before setting the phone up it would charge past 50% while powered off - after setup it will not go past 50. Will try charging in recovery mode and see what happens. I have a feeling if you flashed a retail ROM on the demo unit before actually powering it up and letting it go into the operating system for the first time it would probably work.
Edit 2: Charging in recovery mode works even post setup.
Cheesequake said:
Just charging while off allows it to go past 50%.
Edit: Before setting the phone up it would charge past 50% while powered off - after setup it will not go past 50. Will try charging in recovery mode and see what happens. I have a feeling if you flashed a retail ROM on the demo unit before actually powering it up and letting it go into the operating system for the first time it would probably work.
Edit 2: Charging in recovery mode works even post setup.
Click to expand...
Click to collapse
Hi, curious how you got into recovery mode. I have demo unit with retail mode removed. I tried holding vol down and power button after turning off, and it doesn't work. Also tried pw down + accessory button + power and didn't work either
Thanks. PS. I wouldn't try flashing a retail firmware /rom because everything that I have read it results in a brick..which recovering from is still being figured out.
EDIT: I remembered I can ADB into recovery. Combo buttons do not seem to work for recovery mode.
1) But rebooting into recovery only shows DEAD ANDROID GUY WITH red "!". And this mode will just auto reboot after a few minutes.
2) Rebooting into FACTORY RESET mode (using button combos after completely turning off device) .......charging beyond 50% seems to work, but the phone screen remains on and fairly bright. I wonder if repeatedly leaving the device on for an hour or 2 every day will eventually give screen burn.
jjy_0503 said:
If you just want to bypass battery lock, try charging via factory reset menu or download mode
Click to expand...
Click to collapse
Hi, does either mode have the option of turning screen off and or monitoring battery charge?
I managed to get into factory reset mode (vol down + power, release and repress power) but it appears it sits with screen on always .
Also how do you get into recovery mode? Tried many ways, cannot seem to get into it.
Thanks...
EDIT...remembered I could ADB into recovery. Although recovery mode on my demo unit with retail mode removed does not seem to have proper recovery mode anymore. Only can get dead android guy with red "!" when going into that mode.
Can report going into factory reset mode does seem to work for charging beyond 50%
Hello, has anyone noticed that the demo unit has reduced the maximum frequency of all cores by about 1 Gh, maybe the same applies to the video core. Is it possible to fix this or not to bypass the firmware limitation? Thank you in advance
Hello guys, what's new about 50%?
I see that now we can unbrick and root the demo.
Does anyone win the challenge?
poog said:
Hi, does either mode have the option of turning screen off and or monitoring battery charge?
I managed to get into factory reset mode (vol down + power, release and repress power) but it appears it sits with screen on always .
Also how do you get into recovery mode? Tried many ways, cannot seem to get into it.
Thanks...
EDIT...remembered I could ADB into recovery. Although recovery mode on my demo unit with retail mode removed does not seem to have proper recovery mode anymore. Only can get dead android guy with red "!" when going into that mode.
Can report going into factory reset mode does seem to work for charging beyond 50%
Click to expand...
Click to collapse
Maybe you can use EDL mode which is used for QFIL..
Entering method is same with other phones such as V40
sribnyy said:
Hello, has anyone noticed that the demo unit has reduced the maximum frequency of all cores by about 1 Gh, maybe the same applies to the video core. Is it possible to fix this or not to bypass the firmware limitation? Thank you in advance
Click to expand...
Click to collapse
you can modify or remove the thermal engines
Cheesequake said:
Has anyone successfully flashed stock firmware to one? I just got a brand new one on ebay for $65 so if I can't do it it's not a huge deal but it sure would be nice to bypass the 50% battery software lock. I've seen a couple people say they did it successfully in youtube comments and stuff but I'm not sure if they actually did or not.
Click to expand...
Click to collapse
Yes there is only one option to flash cross lg v60
Cheesequake said:
Has anyone successfully flashed stock firmware to one? I just got a brand new one on ebay for $65 so if I can't do it it's not a huge deal but it sure would be nice to bypass the 50% battery software lock. I've seen a couple people say they did it successfully in youtube comments and stuff but I'm not
DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,
Also, Please backup your data beforehand as this does wipe the phone.
Requirements
1-LGUP 1.16.0.3 .
2-LG Mobile Driver 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz
!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup .
2.put youR lg v60 demo into Download Mode".
1. Open LGUP.
2. Pick V600EA20c_00_0526.kdz .
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.
after completing the process it will boot up in some minutes .
sure if they actually did or not.
Click to expand...
Click to collapse
DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,
Also, Please backup your data beforehand as this does wipe the phone.
Requirements
1-LGUP 1.16.0.3 .
2-LG Mobile Driver 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz
!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup .
2.put youR lg v60 demo into Download Mode".
1. Open LGUP.
2. Pick V600EA20c_00_0526.kdz .
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.
after completing the process it will boot up in some minutes .
Bahmale said:
DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,
Also, Please backup your data beforehand as this does wipe the phone.
Requirements
1-LGUP 1.16.0.3 .
2-LG Mobile Driver 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz
!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup .
2.put youR lg v60 demo into Download Mode".
1. Open LGUP.
2. Pick V600EA20c_00_0526.kdz .
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.
after completing the process it will boot up in some minutes .
Click to expand...
Click to collapse
Did you already tried on V60 demo and have some proof?
dEFLASH said:
Did you already tried on V60 demo and have some proof?
Click to expand...
Click to collapse
Yes work fine but no gsm network in lg v60 demo and battery full charge and wifi work fine
Bahmale said:
Yes work fine but no gsm network in lg v60 demo and battery full charge and wifi work fine
Click to expand...
Click to collapse
firmware 20f also works?
is the one seen in the captures
Raify4 said:
firmware 20f also works?
is the one seen in the captures
Click to expand...
Click to collapse
Only you firmware V600EA20c_00_0526.kdz and after install it will show you as 20f
Bahmale said:
Yes work fine but no gsm network in lg v60 demo and battery full charge and wifi work fine
Click to expand...
Click to collapse
No gsm module in demo it's ok
Thanks for info, will try.
probado con el lgup de este hilo
funciona
THANS
Bahmale said:
DESCARGO DE RESPONSABILIDAD: No soy responsable de ningún daño que esto pueda causar, ya que simplemente estoy traduciendo la guía, no soy responsable de que bloquees tu dispositivo debido a un paso perdido, así que lee con atención.
Además, haga una copia de seguridad de sus datos de antemano, ya que esto borra el teléfono.
Requisitos
1-LGUP 1.16.0.3.
2-Controlador móvil LG 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz
¡¡¡TENGA CUIDADO DE HACER EXACTAMENTE LO QUE DICEN LAS INSTRUCCIONES O LADRILLARÁ EL TELÉFONO !!!
1. Haga una copia de seguridad.
2. Ponga su demo de LG V60 en modo de descarga ".
1. Abra LGUP.
2. Elija V600EA20c_00_0526.kdz.
3. Seleccione "PARTICIÓN DL".
4. Presione Iniciar. Y aparecerá una ventana emergente. En esta ventana puede seleccionar qué particiones se actualizarán
5. desmarque estas particiones: XBL_A, XBL_B, XBL_CONFIG_A, XBL_CONFIGE_B, SID_A y SID_B.
después de completar el proceso, se iniciará en unos minutos.
Click to expand...
Click to collapse
!
is this
Related
Hi there.
Sorry about this thread if it has been disscused but I searched here a little and I didn't found something similar to my problem.
I bought my phone last summer in 2010 from Wien , Austria.
I decoded it here in Romania.
3 days ago I upgraded to 2.1...All good , but a few hours ago the phone was charging and someone called me , I answered talked for 10-15 sec then it turned off. I tried to take out battery , sim , memory card for 5-10 min but it didn't turned on , it was only vibrating.I tried to update again but it was only failing.I tried to take out battery etc etc...only vibrating.
Please help me ! Thanks.
Try flashing the stock 2.1 rom if it doesnt worl try the 2.2
Sent from my X10i using XDA Premium App
Thanks for this quick reply.There is one problem : ME .
I'm new to this x10 experience.
Don't have knowledge about cell phones their programs and stuff like that.
I searched a bit on google about flashing and really don't want to f**k this up.
Can you please give me a link or explain how I can do what you wrote above?
Try the power button.
So I downloaded the flash tool read all there but the problem is I can't turn on my phone to see the baseband...
When you try to turn it on does the led just flash red? Mine just did this and the problem is the battery was dead. For some reason it didn't charge while plugged into my laptop. I don't know why, but I had to charge it in my car. Not sure if it has something to do with my battery or from when I flashed/rooted to 2.1 a week ago. Been working fine until today.
The battery is full i just tried to charge it is GREEN and then it turns off just like when it's full.So what can i do about the baseband?
Morti mami lui de telefon !
alexspike said:
Morti mami lui de telefon !
Click to expand...
Click to collapse
Nu fi nervos pe telefon !! Nu el este de vina in cele mai multe cazuri, ci utilizatorul !
Acum ca sa te ajut uite ce trebuie sa faci mai intai verifica daca iti intra in flashmode, daca da atunci =>next da se poate rezolva.
Lasa chestia aia cu flashtool-ul daca nu sti basebandul, poti sa sari peste ea folosind softul original de la SE, SEUS acesta recunoaste automat ce baseband ai si iti downloadeaza firmwareul corect. Insa trebuie sa ii dai repair sa iti instaleze de la 0 tot romul, insa vei pierde toate datele.
daca nu si nici nu porneste=> atunci e de rau si trebuie sa duci telefonul in service, si ori ai stricat bootloaderul sau sa dus ceva hardware, oricum la nici unu nu ai acces deocamdata.
Sorry for that how not understand what i wrote, the men is really pissed off, and try to explain how to solve a solution in the native language.
Mersi sa vad ce rezolv revin cu un PM sau reply.
Does that mean it is fixed?
I have the same problem. My phone just cant start. Only green led and vibro....and black screen.
PROBLEM SOLVED SEUS RULZ ! (seus = sony ericsson update service)
@zeera
Well i just didn't do nothing about flash or something like that i just waited and tried to open it. My battery went red , I charged him all good full battery i plugged usb cable to PC runned update service and finally THE UPDATE WAS A SUCCES !
for 3 days I have been in to hell with everyone because a fu**ing phone ( wich I love )
Thanks all who tried to help me !
Sorry was going to post that but forgot my bad for the delay ;(
Sent from my X10i using XDA Premium App
hey can you explain exactly how you did it step by step?
I have this problem too.
isiena said:
hey can you explain exactly how you did it step by step?
I have this problem too.
Click to expand...
Click to collapse
Well the problem began when the phone was charging , someone called me , i answered , we talked for 10-15 seconds and then the phone turned off. I tried to turn it on but nothing. I didn't tried to flash or something like that instead i tried to install 2.1 again and again with update service from Sony Ericsson. I waited for a few days 2-3 days I guess and tried in these days to update him but was always failing.Yesterday my battery went red , I charged it and updated and it was a succes ! And then i was able to turn it on !
Hope it will be useful for you too.
Hi when the phone wasn't turning on did it connect to the computer at all? [Mine didn't]
Sony Ericsson Update Service
Hi,
Please have a look at the SEUS software for your phone.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice?cc=gb&lc=en
Download this and use it to restore your phone to an original state if something went wrong during an update or it has crashed totally and the phone is unusable. It will work!
If you want to customize your phone and use Flashtool to load a custom rom or firmware onto your device, you will need to have it in a working state to begin with and know which basebad you are running.
how can i update some software from SUES...flash it or do anything....if the phone is not detecting on my computer?
my phone was only vibrating for a sec when i switch it on till past few hours...no red light or green light...
but from past few mins i see red light blinking 3 times when i try to switch it on...and no display...and if i connect a charger(which i did for several hours) and the phone was only blinking red all the time..but there is no charge in the phone...
now there is no vibration but the red light blinks infinitely as i charge my phone...but no display when i turn it on....
is this a known issue? how do i flash it or update the software using SEUS on my phone in this condition?? because the phone wont turn on or detect on my computer... http://media.xda-developers.com/images/icons/icon9.gif
nrmr82 said:
how can i update some software from SUES...flash it or do anything....if the phone is not detecting on my computer?
my phone was only vibrating for a sec when i switch it on till past few hours...no red light or green light...
but from past few mins i see red light blinking 3 times when i try to switch it on...and no display...and if i connect a charger(which i did for several hours) and the phone was only blinking red all the time..but there is no charge in the phone...
now there is no vibration but the red light blinks infinitely as i charge my phone...but no display when i turn it on....
is this a known issue? how do i flash it or update the software using SEUS on my phone in this condition?? because the phone wont turn on or detect on my computer... http://media.xda-developers.com/images/icons/icon9.gif
Click to expand...
Click to collapse
My x10 has done this before, it does it when you drain you battery below a certain voltage, which is too low for the phone to begin charging it again. You could try putting your battery in a dock to charge it. All i did was cut the end off a usb cable, stripped the positive and negative wires and just held them against the batteries terminals for ten minutes white the other end of the cable was plugged into the computer. Put the battery back in my phone and it had 20% charge.
I tried to root my phone using universal-androot and it was successful. After that i flashed clockworkmod recovery. And i thought of making a back-up of my current stock-ROM and there it was... my phone suddenly got blacked-out. Now i cant even turn-on my phone. I tried all the different possibilities like holding 'vol down+home+power', 'vol up+vol down+power', dint work .!! help me please
I was told that you can't backup stock roms using clockworkmod.
Can you turn the phone on in any mode? normal/download/anything else?
Nop !! can't do anything. Tried all the patterns.
did the phone do anything before it turned off? or did it just go blank?
Also, can you remember what clockworkmod was saying before it went blank? e.g. what processes it was undergoing?
I think the problem is with clockworkmod recovery. Coz while trying to flash the recovery, I was asked to select the phone model, but 'samsung galaxy 5' was not in the list, So i selected 'Huawei model' or something in order complete the installation! but still the installation was successful. And when i clicked 'Backup my current ROM' the phone suddenly got switched-off.
Were you trying to install the recovery from rom manager?
You need to install it via odin for the Galaxy 5.
Your phone probably needs a time+materials trip to the service centre.
Yeah, flashing that can't have done your phone any good Rom manager doesnt (yet) support our phone
have you tried firmware download mode?
remove your battery, put it back on
now press volume down, central select button and power.
keep holding till a yellow sign appears with android and a broom
now go to odin and flash CWM recovery or other rom.
madteam.co forum has lots of info about europas
rpadula said:
have you tried firmware download mode?
Click to expand...
Click to collapse
It appears to me he did.
I had the same problem.
I removed the battery for 30 minutes, and removed the SIM. SIM removal was necessary.
Remove the SD Card too; it might help.
rpadula said:
have you tried firmware download mode?
remove your battery, put it back on
now press volume down, central select button and power.
keep holding till a yellow sign appears with android and a broom
now go to odin and flash CWM recovery or other rom.
madteam.co forum has lots of info about europas
Click to expand...
Click to collapse
guys i 2 did the same dumb thing now is there any way of restoring it
i have the same problem...please help
ya, i did too. your hooped. send it in. I just got my replacement but need to know how to back up baseband cause all the ones available give me issues here in Canada. Anyone seen I5500MUGKE3 ? Virgin mobile canada still using eclair
Has anyone tried a jig to get it to Download mode?
Fully bricked! Now you can build a new home. Bye
Solve problem
proimage said:
i have the same problem...please help
Click to expand...
Click to collapse
Singura solutie e serviceúl Placa de baza se face scrum Am patit-o de 2 ori cu backupul Acum il astept iar sa vina din service
VibrantWind said:
Has anyone tried a jig to get it to Download mode?
Click to expand...
Click to collapse
Yes I tried it and it didn't work does maybe a new battery make the G5 working again?
sorry if english was bad
Its the piece of crap that is ROM manager. I bricked mine too, only way to fix is by sending it back to Samsung, mine was under warranty so I was ok
Priezti said:
Its the piece of crap that is ROM manager. I bricked mine too, only way to fix is by sending it back to Samsung, mine was under warranty so I was ok
Click to expand...
Click to collapse
My too! Luckily me!
Sent from Outerspace
Hello, so this problem really started randomly, doesn't matter what I do, lets say I type a message my Lumia's screen is completely not responding like its dead, the search, windows or back keys, don't work either, but I can lock the phone, when I lock it and unlock it, everything is fine for some time, then again, I did a soft reset to check if there were no apps running that might have been stuck, nothing worked, then I actually did a hard reset, which helped for like 10 minutes and then the problem was there again... I am using Windows Phone 7.8, I don't know if that could be the problem, because I've been using it for few days and the problem came up only today, so, if anyone could help I would be really thankful, because the problem is really annoying.
Archanor said:
Hello, so this problem really started randomly, doesn't matter what I do, lets say I type a message my Lumia's screen is completely not responding like its dead, the search, windows or back keys, don't work either, but I can lock the phone, when I lock it and unlock it, everything is fine for some time, then again, I did a soft reset to check if there were no apps running that might have been stuck, nothing worked, then I actually did a hard reset, which helped for like 10 minutes and then the problem was there again... I am using Windows Phone 7.8, I don't know if that could be the problem, because I've been using it for few days and the problem came up only today, so, if anyone could help I would be really thankful, because the problem is really annoying.
Click to expand...
Click to collapse
eu estava com o mesmo problema que você voltei para a 7.5, e esta tudo bem agora.
davifs said:
eu estava com o mesmo problema que você voltei para a 7.5, e esta tudo bem agora.
Click to expand...
Click to collapse
This forum have only one language. English. Please, respect this fact.
I know its weird, but everythings alright now, I just kept the phone off for the night and in the morning, ta-da!
The thread can be closed.
Hi everyone,
A few days ago, I received an update notification on my mi box, and it was android 9 (about 690MB). After downloading it, I press restart. I left the room and did not see what exactly happened, but when I return it was restarting over and over after showing boot screen (mi logo and ...). At first, I thought it was part of the updating process, but it was rebooted a lot, so I recognize that it is a boot loop.
I tried to boot into recovery, to wipe data or factory reset, but I couldn't.
What can I do now?
Hey. This instruction should help you https://4pda.ru/forum/index.php?s=&showtopic=399304&view=findpost&p=55136455. Mandatory with such settings
. But only at your own peril and risk) If there is a guarantee, bring it to the service.
nooks15 said:
Hey. This instruction should help you https://4pda.ru/forum/index.php?s=&showtopic=399304&view=findpost&p=55136455. Mandatory with such settings
. But only at your own peril and risk) If there is a guarantee, bring it to the service.
Click to expand...
Click to collapse
Thank you! Managed to make my Mi Box S finally boot!
You lost DRM and cannot use netflix anymore, right?
rstancu said:
Thank you! Managed to make my Mi Box S finally boot!
Click to expand...
Click to collapse
I just bought the MI BOX S and after 30 min I clicked "update" it is stuck in boot looping and it is no loading the Android. I'm not even able to reach the wipe data screen by pressing the controller buttons (ok+return) during startup.
I checked this procedure to open MI BOX and set a jumper, it seems to be too risky.
By any chance, Is there a way to do the wipe data or hard reset by using USB keyboard?
another idea is try to update. Does anyone have the link to download the ROM for MI BOX S MDZ-22-AB?
Thanks!
LucasEd said:
I just bought the MI BOX S and after 30 min I clicked "update" it is stuck in boot looping and it is no loading the Android. I'm not even able to reach the wipe data screen by pressing the controller buttons (ok+return) during startup.
I checked this procedure to open MI BOX and set a jumper, it seems to be too risky.
By any chance, Is there a way to do the wipe data or hard reset by using USB keyboard?
another idea is try to update. Does anyone have the link to download the ROM for MI BOX S MDZ-22-AB?
Thanks!
Click to expand...
Click to collapse
https://android.googleapis.com/pack.../84eeea378c7cbd03adb8240382717aa457ef6ea5.zip
link for latest update.zip MiBox S Pie build 2231
Dr.Fix said:
You lost DRM and cannot use netflix anymore, right?
Click to expand...
Click to collapse
If in the Usb Burning Tool choose "Erase normal" option you don't lose DRM keys. Read the guide carefully.
tengo el mismo problema
rstancu said:
Thank you! Managed to make my Mi Box S finally boot!
Click to expand...
Click to collapse
how do you connect your device, mine wasn`t identified and does not show in device list.
rstancu said:
Thank you! Managed to make my Mi Box S finally boot!
Click to expand...
Click to collapse
what usb cable did you use? is it required to use usb hub?
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
WoW2ndJob said:
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
Click to expand...
Click to collapse
Hi,
IMO the best solution is searching for the Service rom on https://androidhost.ru/ (type ANE- or ANNE- , the correct FW depends on the current version of Android and your region - Cxxx), and doing the dload method from SD card. Process will erase all the data from your device !
Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader.
Funky enough will download tomorrow, since my network speed is crap.
Another thing while holding vol+ with vol- and power button it gives me in ADB recovery, since i cannot see the screen i dont know what it shows.
Also to mention I've pulled from fastboot all info
product model ANE-LX1
build ANE-LX1 9.1.0.306
hw/eu
And the Cxxx is matching except the last 2 T8 for example.
I think I've found culprit. Seems like the backlight is dead for some apparent reason or totally turned down, not even In dark i can see the screen, except on the lock screen where i see the warning the phone has been recently turned off then on input password.
But why is then working absolutley fine in fastboot&rescue mode?
If you do not belive me ill upload pictures.
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
WoW2ndJob said:
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
Click to expand...
Click to collapse
I believe you , but if it's HW problem (damaged motherboard, short circuit etc.), I can't help you anymore. Have you tried dload method with Service ROM?
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
AmorPower said:
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
Click to expand...
Click to collapse
Yes, You can (process will erase all Your data) . Use Service ROM only!
bozka1 said:
Yes, You can (process will erase all Your data) . Use Service ROM only!
Click to expand...
Click to collapse
Thank you! gotta do this later and give an update. God bless
AmorPower said:
Thank you! gotta do this later and give an update. God bless
Click to expand...
Click to collapse
my phone can't enter recovery mode, it only booting constantly