can somebody help please , yesterday i tried flashing stock rom using nokia tool and it took a lot of time and didn't reboot back with a working screen , before it was in bootloader mode at least that was better , i could do anything from there , but now its just black screen , detected as Qualcomm loader on windows 10 , please help ?
Hey did you any resolution ...if yes than can you please share with me my mobile also stuck in edl mode ( only show Qualcomm River in device manager)
Related
Hi xiaomi users
if you bricked your mi5 after wrong flash or something went wrong and you not able any more to start you device normaly, so you'r in the correcte thread to unbrick your mi5 with the correcte fastboot rom and miflash beta
whatever the cause of bricking your device( in my case no boot, no recovery mode and no fastboot mode just black screen),if it connected to your laptop and show qualcomm QHsusb QDloader 9008 in devices manager then you have big opportunity to make it alive again :fingers-crossed:
1 :
download and install xiaomi flashing tool miflash beta frome here : http://en.miui.com/forum.php?mod=at...jYmIxNDZifDE0NjYzMTc1OTZ8MzEyNzU5MnwyODE5Nzk=
2 : download the correct fastboot rom for your xiaomi mi5 from here : http://update.miui.com/updates/v1/fullromdownload.php?d=gemini&b=X&r=cn&n=
note: i have chosen the latest china dev fastboot rom to unbrick my mi5,other fastboot roms not worked for me
put your fastboot rom to c/ drive and extract it ,not on desktop or other extension
3 : enter on fastboot mode by pressing power and volume down you will see logo of xiaomi its fastboot mode,if you cant access fastboot mode just connect you mi5 to your laptop it will detect it as qualcomm driver
4 : open miflash beta and check flash all,chose you rom in c drive then clik refresh button you will se your device as com port,now start flash by cliking on flash button and be patient it will take over 5 min, when success unplug your and start your phone,if not start just let it connected to your laptop over 30 min it will start automatically
now enjoy your mi5 with latest miui8 china developer,
hit thanks buton if im help you :good:
Hi guys, i was trying to flash a global stable rom with edl and miflash but something went wrong and miflash says that memory was unsifficient. What should i do? I'm on windows 10 64bit with all adb installed (i think). I even disabled the driver license. I didn't do nothing since the error and i don't know if i should unplug the cable or whatever.
hey, it says flash done (sucessful), but my phone still with black screen and nothing happens, should i just wait?
Hi guys, im not sure if this will help you or not but my phone bricked last night and ive manage make it work again by following this method but it little bit different so when it my phone successfully flashed, i just left it untill the batteries is empty by left it all night (before bricked the batteries was 50% i think), maybe it will take longer then mine and if this method work it showing battery empty indicator like normal phone.. ps: when my phone bricked i had no fastboot no recovery no edl, just black screen and red light indicator.. good luck guys
i have used the test point method and successfully flashed the latest Rom V8.5.2.0 with the latest MiFlash 201612220. after flash done, the phone still cannot turn on... anybody can help???
Yesterday I did UNLOCK BOOTLOADER and then ROOT everything was fine I wanted to install V4A but after installation the device was in BOOTLOOP so I did it FULL WIPE and everything worked so I said I will return it to LOCK BOOTLOADER and since the device works it is stuck on the current image have been destroyed and can not boot realme can not enter bootloader and recovery
Today a good guy came into my computer and did MSMTOOL with me twice but without success I do not know what to do The device was bought exactly a week ago Thanks for the help
PS MSMTOOL requires username and password so that's why the guy helped me if something has a username and password I would love to try again
MY DEVICE - rmx2086
Amitayy said:
up plis help my phone briked!!
Click to expand...
Click to collapse
EDL mode is available but I have no clue if Flashone - "Qualcomm - flash dead phone" will work. Besides Flashone looks for zip file not ozip. You may need to convert ozip to zip and please check here for that - https://forum.xda-developers.com/realme-2-pro/how-to/convert-ozip-to-zip-installing-stock-t4065277.
I have X3, not Super Zoom but I could get the phone to edl mode and could see the COM port on Windows too. Power off the unit. Connect your USB cable to PC - this is important. wait for the screen to go blank. Press Vol Down + Power button together to get to recovery mode - takes few seconds. Select language and then press ver 1.2 (as shown on X3) about 3 times to get to edl mode. If you do not connect the cable as mentioned tapping ver x.x does not do anything.
Hope that helps and good luck.
PS: I know that you've mentioned that no recovery. Hopefully assume the screen remains blank and tap on bottom middle to see if Windows recognises any COM port under device manager.
up plis help my phone briked!!
bro did you get the solution . because i need it. my phone is bricked . it shows current image has been destroyed.....that stuff. its bootloader is not unlocked . i dont know what to do . some please help
hi , i have a realme x3 , after downgrading my phone is bricked , its says current image has been destroyed ........... , please help me someone in this lockdown without phone i will be in great trouble please help me . i am not able to boot to fastboot menu . its detected by the computer when both volume and power button is pressed
Bro msm tool works or not
Help me bro
Can anyone help me my poco f1 got stuck in twrp logo and refuse to instal fastboot stock rom from fastboot mode until got dead the phone doesnt charge or boot the only way to get reconized by PC is with Qualcomm port but it give me errors and when i succeed it ask me for edl account authentification to keep the process its my main phone i tried some other tools but nothing works i just want it to work again i hope u guys look to it and help me im hoppeless with my phone
Hi
I need help
My phone is realme gt 5g snap 888 5G.
I need install firmware to phone but my phone boot only fastboot.
I connect to pc only to fastboot mode i dont connect to pc to EDL mode because when i start install firmware (EDL mode) my phone every time restart.
I have the same issue can't access bootloader because I relocked and installed magisk before that which made my device restart every time non stop can't access anything I need help
Kopasz999 said:
Hi
I need help
My phone is realme gt 5g snap 888 5G.
I need install firmware to phone but my phone boot only fastboot.
I connect to pc only to fastboot mode i dont connect to pc to EDL mode because when i start install firmware (EDL mode) my phone every time restart.
Click to expand...
Click to collapse
The same problem! Please help us!
I have an issue with this phone
Let me explain
First i unlock bootloader and all that stuff
Root the phone installed a custom rom
Suddenly I notice the Wi-fi was not workin and I installed an actualization, the phone runs out of battery
Now when I try to turn on the phone it says that the image had been destroyed and cannot boot
I cant go in to fastboot mode or recovery mode
My pc does not recognize the device
What can I do?
Take it to authorized service center and let them try to fix it.