Hi guys, I recently bought a gt realme on aliexpress and I didn't realize it was the cn version, while trying to change the rom via flashboot my pc died, in the middle of the process.
Now it doesn't turn on, and when connected via usb only the qualcomm hs usb qdloader 9008 driver is recognized and nothing else. This has been about 20 days and so far without any success in all attempts to bring it to life.
Someone who can help me? is there any box or dungle that can restore the software? or would it be possible to buy a motherboard to replace it?
I thank everyone.
Not yet, I'm traveling.
I will probably need your help.
hoangzk9 said:
Hi, did you solve the problem ?
Click to expand...
Click to collapse
send me your contact
I have the same problem, can you help me too?
hoangzk9 said:
Hi, did you solve the problem ?
Click to expand...
Click to collapse
hi, can i do something with this?
Not fixed Hoang bro tried
Is anyone still available to help unbrick a Realme GT?
I've seen a guide that tells me to use the QFIL, but the guide only offers the firmware as .img files and not a mbn file, what am i supposed to be doing differently?
Qfile is unable to push file. I have extracted img of files from ofp
novicelearns said:
Qfile is unable to push file. I have extracted img of files from ofp
Click to expand...
Click to collapse
I managed to get an ofp file, but QFIL just says:
03:59:50: ERROR: function: sahara_rx_data:276 Unable to read packet header. Only read 0 bytes.
03:59:50: ERROR: function: sahara_main:982 Sahara protocol error
03:59:50: ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Fail: process fail
Finish Download
Click to expand...
Click to collapse
Ofp doesn't work on qfile. Realme GT is easy to brick. Use msmtool to to repair. Contact ┤Mod Edit├┤Name removed├. He can fix it.
novicelearns said:
Ofp doesn't work on qfile. Realme GT is easy to brick. Use msmtool to to repair. Contact hoangzk9. He can fix it.
Click to expand...
Click to collapse
MSMTool does not work because the phone is in a bootloop where i cant get into recovery/fastboot/adb.
I PMed him yesterday, but probably he is busy.
stabilergott said:
MSMTool does not work because the phone is in a bootloop where i cant get into recovery/fastboot/adb.
I PMed him yesterday, but probably he is busy.
Click to expand...
Click to collapse
yes if msmtools doesn't work then only service center. This GT **** tends to brick. many users has bricked GT . my device is bricked too. but hoang can fix yours i believe. he fixed mine once then bricked again. Hope now it will be safer as twrp is available now.
i tried my best to fix it myself but it seems impossible. i believe oppo blocks install from third party softwares. with time tricks will come out to safely unbrick it
stabilergott said:
MSMTool does not work because the phone is in a bootloop where i cant get into recovery/fastboot/adb.
I PMed him yesterday, but probably he is busy.
Click to expand...
Click to collapse
if in bootloop, device isn't turned off completely? if yes then easy fix . if no msmtool needed.
novicelearns said:
yes if msmtools doesn't work then only service center. This GT **** tends to brick. many users has bricked GT . my device is bricked too. but hoang can fix yours i believe. he fixed mine once then bricked again. Hope now it will be safer as twrp is available now.
Click to expand...
Click to collapse
How does TWRP work? As far as i know its an .apk file, how can you use this with a bricked phone?
I cannot go to the service center, here in Germany they dont fix the chinese rom.
novicelearns said:
if in bootloop, device isn't turned off completely? if yes then easy fix . if no msmtool needed.
Click to expand...
Click to collapse
How exactly? It vibrates, then the realme Logo appears for 1 second and then it turns off and restarts the loop.
stabilergott said:
How exactly? It vibrates, then the realme Logo appears for 1 second and then it turns off and restarts the loop.
Click to expand...
Click to collapse
you can go to fastboot mode by presssing power and volume down when turn on. if off, try clicking power button for 2 mins then power and vol down. once in fastboot mode stay there its easy to get back device by following careful steps.
novicelearns said:
you can go to fastboot mode by presssing power and volume down when turn on. if off, try clicking power button for 2 mins then power and vol down. once in fastboot mode stay there its easy to get back device by following careful steps.
Click to expand...
Click to collapse
your device isn't bricked. its an easy fix i think
novicelearns said:
you can go to fastboot mode by presssing power and volume down when turn on. if off, try clicking power button for 2 mins then power and vol down. once in fastboot mode stay there its easy to get back device by following careful steps.
Click to expand...
Click to collapse
When i do this the phone does nothing, it just keeps vibrating once, showing the splash screen for like half a second and then its starts from the beginning. Anything else you suggest i try?
I've been trying all the steps from all different sites for months now.
it didn't brick if there is a power up screen. you can use software to boot to fastboot. you have team viewer?
Related
I'm afraid I made of hard bricked my note 3 ( yes I know this may be hard to do)... I tried installing clockwork mod and rooting my N900-Canadian Version. I am now a continuous loop in which my phone is trying to continuously go into boot mode not the actual startup screen. ODIN is not detecting it because it's not starting up. I cant put it into any other mode either. What do I do?
johnzors said:
I'm afraid I made of hard bricked my note 3 ( yes I know this may be hard to do)... I tried installing clockwork mod and rooting my N900-Canadian Version. I am now a continuous loop in which my phone is trying to continuously go into boot mode not the actual startup screen. ODIN is not detecting it because it's not starting up. I cant put it into any other mode either. What do I do?
Click to expand...
Click to collapse
i think your device have been soft brick, just with boot loop or loop on recovery, if you use philz's recovery version, you can flash a zip file to resolve the end of this problem, i don't know what recovery version that you're using. Now, you must take your device return the time you begin with the tools like kdz tool, or flash tool on lg devices.
keveinee said:
i think your device have been soft brick, just with boot loop or loop on recovery, if you use philz's recovery version, you can flash a zip file to resolve the end of this problem, i don't know what recovery version that you're using. Now, you must take your device return the time you begin with the tools like kdz tool, or flash tool on lg devices.
Click to expand...
Click to collapse
Thanks for the help.. It's was actually a soft brick then but now my device wont turn on. Can't enter recovery mode at all. It's a hard brick. I've seen a post where they explain how to perform an unbrick but I'm not sure if I need a specific debrick,img file for my N900w8 to mount on my micro SD card. Can you help me out?
johnzors said:
Thanks for the help.. It's was actually a soft brick then but now my device wont turn on. Can't enter recovery mode at all. It's a hard brick. I've seen a post where they explain how to perform an unbrick but I'm not sure if I need a specific debrick,img file for my N900w8 to mount on my micro SD card. Can you help me out?
Click to expand...
Click to collapse
Press and hold 2 key volume up and volume down, and plug in your device to your computer machine. if have "download mode" on screen your phone, your device can be cured and if not. If have, i will help you next steps.
keveinee said:
Press and hold 2 key volume up and volume down, and plug in your device to your computer machine. if have "download mode" on screen your phone, your device can be cured and if not. If have, i will help you next steps.
Click to expand...
Click to collapse
It does not have download mode..There is no Power at all. The phone is hard bricked . Appreciate the help! What do I do?
johnzors said:
It does not have download mode..There is no Power at all. The phone is hard bricked . Appreciate the help! What do I do?
Click to expand...
Click to collapse
charge fully your device first. and do it with my guide ago. maybe you will see "download mode".
keveinee said:
Press and hold 2 key volume up and volume down, and plug in your device to your computer machine. if have "download mode" on screen your phone, your device can be cured and if not. If have, i will help you next steps.
Click to expand...
Click to collapse
Pretty sure that no Samsung phones made in the last couple of years gets into Download Mode like that any more.
OP: You might need a jtag service such as this:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
es0tericcha0s said:
Pretty sure that no Samsung phones made in the last couple of years gets into Download Mode like that any more.
OP: You might need a jtag service such as this:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
Click to expand...
Click to collapse
Thanks a lot! I'd like to try doing it myself before I resort to sending it off somewhere. But if worst comes to worst I'll do that. There has got to be a way to fix this
Hey everyone,
Today I woke up and found my phone in a black screen and no response at all, tried force restart and everything but nothing worked with me.
The situation is that the only thing that I can see is a flashing red light when I charge it, and every time I try to turn it on by holding the power button and connecting it to charge it does vibrate then it returns to the black screen and flashing red light.
However, I managed to open the fastboot/rescue mode but it's locked and I tried to do everything on fastboot but as long as the phone is locked I couldn't do anything (I need a code tho to unlock it but I prefer not to).
I would appreciate it if anyone can help me with it.
Thanks
Can you boot into erecovery?
donkeyman1234 said:
Can you boot into erecovery?
Click to expand...
Click to collapse
Unfortunately not, the only thing that I can boot is fastboot/rescue mode.
I tried to boot the recovery through my computer "fastboot reboot recovery", but it won't it just keeps booting the black screen with red flashing light.
Well, without erecovery and bootloader still locked, have you tried dload method or a quicker way just send back to service center?
donkeyman1234 said:
Well, without erecovery and bootloader still locked, have you tried dload method or a quicker way just send back to service center?
Click to expand...
Click to collapse
I'm not sure what is "dload method", I would appreciate if u can explain it to me.
About the service center, actually it is my last option.
Thanks
https://forum.xda-developers.com/showpost.php?p=80124126&postcount=2 you have to use force update, look it up in the forum, many topics about dload method.
Had the same problem on my Mate 20 Pro, sent it to reapair on warranty and they change the motherboard on the phone.
donkeyman1234 said:
https://forum.xda-developers.com/showpost.php?p=80124126&postcount=2 you have to use force update, look it up in the forum, many topics about dload method.
Click to expand...
Click to collapse
I tried the Force Upgrade but no response at all... just a black screen.
Any other solutions?
Mostar088 said:
Had the same problem on my Mate 20 Pro, sent it to reapair on warranty and they change the motherboard on the phone.
Click to expand...
Click to collapse
Well, they did what they had to do
Hello all,
I hope someone can help me with this headache.
I downloaded and tried to install the EU rom from here https://xiaomi.eu/community/threads/download-link-for-curtana.56901/ on my Curtana using LRTWRP. However, I got an error during installation, I pushed reboot to recovery. Now the phone reboots so quickly that I cannot reach any fastboot or recovery mode. Has anyone had this problem before? any way to fix it?
Keep holding down power + vol down. That gets the phone into fastboot
do you see the redmi logo at all?
kgoerbig said:
Keep holding down power + vol down. That gets the phone into fastboot
Click to expand...
Click to collapse
Thanks. I tried this with no luck, it just keeps reseting.
_4PERTURE_ said:
do you see the redmi logo at all?
Click to expand...
Click to collapse
Yes, I see the initial logo for a fraction of a second and then it resets.
hhadi said:
Hello all,
I hope someone can help me with this headache.
I downloaded and tried to install the EU rom from here https://xiaomi.eu/community/threads/download-link-for-curtana.56901/ on my Curtana using LRTWRP. However, I got an error during installation, I pushed reboot to recovery. Now the phone reboots so quickly that I cannot reach any fastboot or recovery mode. Has anyone had this problem before? any way to fix it?
Click to expand...
Click to collapse
You probably flashed wrong zip file. Unfortunately your unit is hard bricked now and the only option left now is Service Center
goldenevil47 said:
You probably flashed wrong zip file. Unfortunately your unit is hard bricked now and the only option left now is Service Center
Click to expand...
Click to collapse
Thanks for the reply. It is so annoying to have to send it back. Also the guarantee is void since I unlocked the bootloader, right?
hhadi said:
Thanks for the reply. It is so annoying to have to send it back. Also the guarantee is void since I unlocked the bootloader, right?
Click to expand...
Click to collapse
Don't tell them that you unlocked BL and I think I read somewhere that unlocking BL in Xiaomi doesn't void warranty. Anyways they can fix the device through EDL flash
HI!
I playing with different firmwares on ulocked LG v60 At&T. After I erased FTM, OP_A OP_B, MODEM_A MODEM_B, SID_A SID_B I try to put phone in download mode but phone back to edl mode.
Qualcomm HS-USB QDLoader 9008 in system but I have no access via QFIL. I try to hold PWR and VOL-, all three buttons. Nothing helps.
How to put my phone in working order?
alexnew33 said:
HI!
I playing with different firmwares on ulocked LG v60 At&T. After I erased FTM, OP_A OP_B, MODEM_A MODEM_B, SID_A SID_B I try to put phone in download mode but phone back to edl mode.
Qualcomm HS-USB QDLoader 9008 in system but I have no access via QFIL. I try to hold PWR and VOL-, all three buttons. Nothing helps.
How to put my phone in working order?
Click to expand...
Click to collapse
Did you ever fix this? I have this problem right now. Stuck in edl mode and can't get to download mode.
mkennedy455 said:
Did you ever fix this? I have this problem right now. Stuck in edl mode and can't get to download mode.
Click to expand...
Click to collapse
It's bricked.You'll need to restore it via Qfil.Read this post here,it has the 20q firmware for AT&T as well.
LMV600AM Restore/Ugrade Guide
This restore process is intended for the AT&T V60 (lmv600am) model and will WIPE your data so back it up if you want to keep it! This process will restore the lmv600am to original factory state for the AT&T v60 v20q build (a11). I’ve dumped all...
forum.xda-developers.com
surgemanx said:
It's bricked.You'll need to restore it via Qfil.Read this post here,it has the 20q firmware for AT&T as well.
LMV600AM Restore/Ugrade Guide
This restore process is intended for the AT&T V60 (lmv600am) model and will WIPE your data so back it up if you want to keep it! This process will restore the lmv600am to original factory state for the AT&T v60 v20q build (a11). I’ve dumped all...
forum.xda-developers.com
Click to expand...
Click to collapse
It looks like this was what he was trying to do...was trying to get a remote sim unlock...
He was doing at least steps 1-4 on that list but kept getting some Sahara error and wanted me to go back to download mode again which is when it ended up stuck in edl and only connects via qfil.
Mine is a t mobile variant but it looks like the same steps just different file to flash.
mkennedy455 said:
It looks like this was what he was trying to do...was trying to get a remote sim unlock...
He was doing at least steps 1-4 on that list but kept getting some Sahara error and wanted me to go back to download mode again which is when it ended up stuck in edl and only connects via qfil.
Mine is a t mobile variant but it looks like the same steps just different file to flash.
Click to expand...
Click to collapse
Yes it's the same steps.Try this and it should get you to download mode and do a refurb. with a T-Mobile kdz. and LGUP.Get the device in edl mode.Open Qfil,and choose flat build etc.Load the firehose,and then choose partition manager.Erase,not delete or remove these 4 partions.After you erase these,load these 4 back in the respectful partition places.This will be boot_a,boot_b,recovery_a,and recovery_b.Then restart the device.This should get you back to a working download mode so you can flash a working kdz image back to the device with LGUP.
surgemanx said:
Yes it's the same steps.Try this and it should get you to download mode and do a refurb. with a T-Mobile kdz. and LGUP.Get the device in edl mode.Open Qfil,and choose flat build etc.Load the firehose,and then choose partition manager.Erase,not delete or remove these 4 partions.After you erase these,load these 4 back in the respectful partition places.This will be boot_a,boot_b,recovery_a,and recovery_b.Then restart the device.This should get you back to a working download mode so you can flash a working kdz image back to the device with LGUP.
Click to expand...
Click to collapse
I will try this again now that the phone has sat a couple days but I believe that's exactly what the "unlock tech" guy was doing and it was giving a Sahara error of some kind. I thought I had a picture of the exact error but I don't.
mkennedy455 said:
I will try this again now that the phone has sat a couple days but I believe that's exactly what the "unlock tech" guy was doing and it was giving a Sahara error of some kind. I thought I had a picture of the exact error but I don't.
Click to expand...
Click to collapse
if you still have problems after i can restore a firmware for you
Leronex_1 said:
if you still have problems after i can restore a firmware for you
Click to expand...
Click to collapse
That would be amazing. The unlock company (unlockboot.com) has been pretty quick to reply and wants to at least put it back to stock even if they can't sim unlock it for me but the biggest downfall now is opening up the back of a water resistant phone that's never been apart just to disconnect the battery.
It would likely take months to drain the battery from 100% to get it out of EDL mode.
mkennedy455 said:
That would be amazing. The unlock company (unlockboot.com) has been pretty quick to reply and wants to at least put it back to stock even if they can't sim unlock it for me but the biggest downfall now is opening up the back of a water resistant phone that's never been apart just to disconnect the battery.
It would likely take months to drain the battery from 100% to get it out of EDL mode.
Click to expand...
Click to collapse
This sounds like a very easy fix. You can exit edl by button combination too, you hold vol- and pwr till your fingers hurt. No joke, it will get you out of there, although if it takes that long then it will probably just re-enter edl because it's bricked.
Leronex_1 said:
This sounds like a very easy fix. You can exit edl by button combination too, you hold vol- and pwr till your fingers hurt. No joke, it will get you out of there, although if it takes that long then it will probably just re-enter edl because it's bricked.
Click to expand...
Click to collapse
Yeah I've been trying that over and over again for a couple days now. Even took it with me to work and yesterday I was holding vol - and power while driving between jobs in hopes it would randomly come back. While connected to my computer doing so causes it to disconnect briefly but immediately reconnects via qfil USB mode.
mkennedy455 said:
Yeah I've been trying that over and over again for a couple days now. Even took it with me to work and yesterday I was holding vol - and power while driving between jobs in hopes it would randomly come back. While connected to my computer doing so causes it to disconnect briefly but immediately reconnects via qfil USB mode.
Click to expand...
Click to collapse
That means your device is bricked, it cannot boot therefore only being able to reboot back into edl, I suggest you message me and we will make it bootable.
mkennedy455 said:
Yeah I've been trying that over and over again for a couple days now. Even took it with me to work and yesterday I was holding vol - and power while driving between jobs in hopes it would randomly come back. While connected to my computer doing so causes it to disconnect briefly but immediately reconnects via qfil USB mode.
Click to expand...
Click to collapse
Just write those 4 files in the zip I uploaded with qfil,and then kick it out of edl mode.Leave the usb cable hooked to it and hold volume down and power until you hear it lose connection with your laptop/desktop.As soon as it does,release and hold volume up.It should boot in to bootloader mode and then write the kdz of your choice with LGUP.
surgemanx said:
Just write those 4 files in the zip I uploaded with qfil,and then kick it out of edl mode.Leave the usb cable hooked to it and hold volume down and power until you hear it lose connection with your laptop/desktop.As soon as it does,release and hold volume up.It should boot in to bootloader mode and then write the kdz of your choice with LGUP.
Click to expand...
Click to collapse
I will try this tomorrow. I don't like to attempt this stuff when I'm tired, mistakes can be costly.
mkennedy455 said:
I will try this tomorrow. I don't like to attempt this stuff when I'm tired, mistakes can be costly.
Click to expand...
Click to collapse
Does this method worked for you.
My complete partition is deleted. The phone is in EDL 9008 mode.
Aroy48 said:
Does this method worked for you.
My complete partition is deleted. The phone is in EDL 9008 mode.
Click to expand...
Click to collapse
I never ended up trying it again. I cut my losses and used it for parts for my other phone.
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
You can reflash the rom with realme flash tool。（https://androidmtk.com/realme-flash-tool) ----Sorry for making a mistake earlier
Have you tried it?
yiyinglaohu said:
You can reflash the rom with MIFLASH。（https://c.mi.com/oc/miuidownload/detail?guide=1 ）or (http://www.miui.com/shuaji-393.html)
Click to expand...
Click to collapse
but the problem is that it is connecting and disconnecting every few seconds
Atalephinio said:
but the problem is that it is connecting and disconnecting every few seconds
Click to expand...
Click to collapse
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
you can find it on google
yiyinglaohu said:
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
Click to expand...
Click to collapse
how??? it is not responding when I am pressing on the buttons. It is hard bricked.
no fastboot no recovery. nothing - just black screen.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
grown_man said:
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
Click to expand...
Click to collapse
I wish it was my situation... I tried it nothing happens.
Atalephinio said:
I wish it was my situation... I tried it nothing happens.
Click to expand...
Click to collapse
then i suggest official repair services
Atalephinio: "but the problem is that it is connecting and disconnecting every few seconds""no fastboot no recovery. nothing - just black screen"
You probably only have EDL mode active. I think only MSM Download Tool will help you. However, but this is a paid service.
This is my opinion, but maybe someone more experienced should have a say.
Try to press three buttons (vol up- vol down- power) during 40 seconds aprox....
May only use 9008 mode.
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Atalephinio said:
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Click to expand...
Click to collapse
As I know that realme gt dont public the flash tool so we need contact to the services to get they help.
Same with you, I have some problem when I tried to flash twrp to realme phone. No luck and my phone became hard brick. But you can send an email to eu services of realme, they can help without any paid.
Good to know.