hi folks,
is it possible and how proceed f it is to update my mx4 to a beta version before the official update and help reporting bugs?
best regards
herve
I'm a bit late but yes, you can!
You can user ubuntu-device-flash to install the rc-proposed channel on your device and you'll get daily updates.
Just received update g925fxxu3zol6 marshmallow no mention of beta . Unsubscrlbed from the beta program yesterday and reinstalled old firmware through smartswitch as told to, just wondering if this is Marshmallow full release any ideas.
It's the same release version as the beta as far as I am aware. Were on zol6. Probably still on their servers as in the beta?
You right installed it and can confirm it's still a beta.
chealyjazz said:
Just received update g925fxxu3zol6 marshmallow no mention of beta . Unsubscrlbed from the beta program yesterday and reinstalled old firmware through smartswitch as told to, just wondering if this is Marshmallow full release any ideas.
Click to expand...
Click to collapse
watch out with that firmware as BIOS (sboot an cm.bin) prevent custom kernel and recovery from booting.
Hi there,
I followed a guide off the net to upgrade to the latest version of Android on my Huawei EVA-L09. 'Upgrade' done, I'm now on Android 5.1 and EMUI 3.1... so I'm pretty sure I haven't upgraded at all. I cannot get the phone connected back to my PC (W10) probably some sort of driver issue (worked before the upgrade though!)
Any advise on what to do? I've just bought a Galaxy S8, so just want this on the latest version of Android to use it for a few days then sell it..
Many thanks
A quick note, I'm currently on model number A168-L09 and Build number: EMUI-A168-L09C432B040SP11. All I want is the latest version of Android and not a beta version, just want the phone being sold. The build numbers make absolute no sense to me, very difficult to understand!
Any help is appreciated.
Hi, my mi10 is currently running global v12.0.6 QJBMIXM stable. I have now started to get an OTA message saying v12.2.1.0 RJBMIXM is ready to d/load.
I have read on here some horror stories about the 12.2 version in general, so my question is: Have Xiaomi sorted the bugs in v12 yet ? or should I just keep clear of this 12.2 version altogether.
I also read on some other sites that Xiaomi are telling users not to d/load 12.2. because its so buggy. If this is the case then why are they still pushing it OTA
I returned to Android 10. The Android 11 version currently has many bugs and many software is not compatible. It is recommended to wait 1 month or 2 before updating.
xuzhimin1993 said:
I returned to Android 10. The Android 11 version currently has many bugs and many software is not compatible. It is recommended to wait 1 month or 2 before updating.
Click to expand...
Click to collapse
Thanks,,, thats what I was thinking, I've heard a lot about Xiaomi's Android 11 & none of it good. Its just daft that they're pushing an OTA version with so many Known bugs in it.
As far as I know, there were two versions of 12.2.2 OTA updates - one that was quickly revoked and the second one which is suppose to be fixed. If you mention the problems and bugs, it would be nice to give some precise infor for other users to understand what actually is not working and to decide.
I am personally using a XEU ROM, and am getting ready to move to A11 build, after many users confirmed that it's running fine.
12/20/10 is not good.
The gestures don't work well. After exiting google maps, the gestures generally do not react. You have to put the phone to sleep and wake it up again.
The battery wears out faster.
Any problems with charging when the phone is turned off.
I do not recommend it, it's better to install earlier versions, but application cloning and OK Google do not work in them
Mate, you're talking about a weekly beta build. @markcoopz was asking about last stable build.
markcoopz said:
Hi, my mi10 is currently running global v12.0.6 QJBMIXM stable. I have now started to get an OTA message saying v12.2.1.0 RJBMIXM is ready to d/load.
I have read on here some horror stories about the 12.2 version in general, so my question is: Have Xiaomi sorted the bugs in v12 yet ? or should I just keep clear of this 12.2 version altogether.
I also read on some other sites that Xiaomi are telling users not to d/load 12.2. because its so buggy. If this is the case then why are they still pushing it OTA
Click to expand...
Click to collapse
I got MIUI Global 12.2.2.0 RJBINXM
OTA Update 3 weeks before and I updated to it.It is running smoothly in my phone till now.No glitches or other problems are experiencing.My phone is Mi10 Indian Version.
pnsdhrn said:
I got MIUI Global 12.2.2.0 RJBINXM
OTA Update 3 weeks before and I updated to it.It is running smoothly in my phone till now.No glitches or other problems are experiencing.My phone is Mi10 Indian Version.
Click to expand...
Click to collapse
Did your 12.2.2.0 OTA say if it was a stable or a stable beta.
My 12.2.1.0 OTA says that its a "Limited release for pilot testers". Thats why I was asking if its worth the hassle. If I ignore this update, will I automatically get the next the next ver. or will the OTA system expect me to install this 1 ist.
markcoopz said:
Hi, my mi10 is currently running global v12.0.6 QJBMIXM stable. I have now started to get an OTA message saying v12.2.1.0 RJBMIXM is ready to d/load.
I have read on here some horror stories about the 12.2 version in general, so my question is: Have Xiaomi sorted the bugs in v12 yet ? or should I just keep clear of this 12.2 version altogether.
I also read on some other sites that Xiaomi are telling users not to d/load 12.2. because its so buggy. If this is the case then why are they still pushing it OTA
Click to expand...
Click to collapse
I am on 12.2.1 Stable (Global) and apart from being on October 1 security patch I think Android 11 is perfect, no issues at all
dezborders said:
I am on 12.2.1 Stable (Global) and apart from being on October 1 security patch I think Android 11 is perfect, no issues at all
Click to expand...
Click to collapse
I have same rom. No problems.
On android 11 both stock and miuimix version is there a decent twrp for it? I have the one chinese variant from littleturtle that works somewhat and none of the other variants of twrp even boot to twrp on 11 they all go back to fastboot. If you do fastboot boot command you get a black screen. The littleturtle build boots on reboot but not on fastboot boot... does not show data to even be able to mount, will flash both stock and miuimix roms and canary magisk but is quirky.
markcoopz said:
Did your 12.2.2.0 OTA say if it was a stable or a stable beta.
My 12.2.1.0 OTA says that its a "Limited release for pilot testers". Thats why I was asking if its worth the hassle. If I ignore this update, will I automatically get the next the next ver. or will the OTA system expect me to install this 1 ist.
Click to expand...
Click to collapse
It says Miui12.2.2.0 Stsble
Have the global edition UMI R was solid as long as I did not try to root it,, TWRP (little turtle edition) was buggy and would flash but was limited on what it would do, had to use canary magisk and it was buggy, LR TWRP would loop if you flashed on R but would boot if you waited a while.. literally have a black screen and think its bricked then it comes up... So I downgraded to Q (used MiFlash) was able to flash working twrp (LR edition) and magisk (latest) then went to miuimix Q also with same TWRP and Magisk. Waiting for development on R as I the workarounds for R for the most part did not work on Miui global R. Would reboot phone sometimes ok others to fastboot. Even with Q some reboots go to fastboot and TWRP is still there and working but it will say no OS installed. Dirty flash over it and it comes back like nothing happened even current magisk persisted. Love the speed and phone until it does this. I did not see a great deal of better features with R over Q to justify continued effort until more development occurs. Still not risking Viper4Android on it, Wavelet does work though and offers some of what is in Viper4Android.
I have the global edition and I am on 12.6.0. Had an ota a few weeks ago and went to download but it comes up not found. Now when I check updates I don't get any new one. I assume they have pulled these updates?
I received 12.2.4 EEA this morning. Seems better than 12.2.1 but fonts don't work anymore
My phone is still on MIUI V12.2.2.0 RJBMIXM, i am facing so many issues in this version, system errors, miui crashs, application crashes, cant share anything between applications, and i have been waiting from beginning of December for a new version to be released, but no luck untill now, i wish if i can downgrade to MIUI 12 A10 based
Hello, I have a question, I just signed up for the Android 13 QPR1 beta program, which beta 3.1 has already arrived. My question is when the stable version of the pixel feature drop will come out in December, my phone will still be updated to that build even though Am I in the beta program?
LINUXKURT said:
Hello, I have a question, I just signed up for the Android 13 QPR1 beta program, which beta 3.1 has already arrived. My question is when the stable version of the pixel feature drop will come out in December, my phone will still be updated to that build even though Am I in the beta program?
Click to expand...
Click to collapse
Yes. However, if you want to opt out of the betas going forward without having to wipe you should opt out after you receive the stable QPR1 update. Otherwise, opting out will require a wipe once they start the QPR2 beta builds shortly after that.
Thank you very much, I really had that question.