Hello everyone ,i just found an old E3 lying around my house which i remember have bootloader locked . As i was not fond of trying out new roms and recoveries at that time and I don't remember how it bricked . I have tried using flash tool to unbrick it with different version 9.18 , 9.23 .9.34 but always when i connect the device it shows us debugging off and some mtp error . I am currently on a pc with windows 10 and i have installed flshtool's driver flashmode and fastboot one but didn't get any sucess then I installed sony e3 dual adb drivers but still error continues . The phone is completely bricked with only red flash blinking with no vibration and screen .I followed all tutorials but can't find the way . Can anyone please guide me a way through it . Thanks in advance
Related
Hi, can anybody help me. I just flashed my locked bootloader x10i with Feralab kernel- [LB]FeraKernel-v15.1-GB just like it instructed ( at this point it is still fine).Then i flashed the Feralab rom -FeraLab_v30.5_Final through CWM ,After that, i try to reboot it ,but the phone just stuck at the sony ericsson text .
When i want to flash it back to stock with flashtool, it wont detect my phone ,it say error , flashing aborted .When i try to flash it to stock with Flashtool 0,291 , it says ERROR - USB\VID_0FCE&PID_ADDE\5&1E642C5D&0&1 and my computer says USB DEVICE CANT BE RECOGNIZED ,I think this is driver related problem cause when I check through Device Manager , I can see a yellow warning mark beside
SEMC Flash Device(it says "A request for the USB BOS descriptor failed." ) and USB Mass Storage Device .I already reinstall PC companion in my windows 8 computer but the problem still persist.
Can anyone help me with this , I mean i cant even get it into flash mode after doing the pressing back while connecting the USB thing to flash it back to stock.
pulldtrigger said:
Hi, can anybody help me. I just flashed my locked bootloader x10i with Feralab kernel- [LB]FeraKernel-v15.1-GB just like it instructed ( at this point it is still fine).Then i flashed the Feralab rom -FeraLab_v30.5_Final through CWM ,After that, i try to reboot it ,but the phone just stuck at the sony ericsson text .
When i want to flash it back to stock with flashtool, it wont detect my phone ,it say error , flashing aborted .When i try to flash it to stock with Flashtool 0,291 , it says ERROR - USB\VID_0FCE&PID_ADDE\5&1E642C5D&0&1 and my computer says USB DEVICE CANT BE RECOGNIZED ,I think this is driver related problem cause when I check through Device Manager , I can see a yellow warning mark beside
SEMC Flash Device(it says "A request for the USB BOS descriptor failed." ) and USB Mass Storage Device .I already reinstall PC companion in my windows 8 computer but the problem still persist.
Can anyone help me with this , I mean i cant even get it into flash mode after doing the pressing back while connecting the USB thing to flash it back to stock.
Click to expand...
Click to collapse
The bootloader should be unlocked first if am not wrong.
ronaksworld said:
The bootloader should be unlocked first if am not wrong.
Click to expand...
Click to collapse
Really , well I thought you can flash Feralab even on locked bootloader Well I guess I get that part wrong . Do you have any idea how to fix the problem above
Solved!
Well guess what , I finally able to flash my phone. First, I detect the all the driver that related with x10i and uninstall its driver completely. Then, I install the driver by disabling driver signature enforcement in windows 8.After that , the usual flashing to stock.
pulldtrigger said:
Well guess what , I finally able to flash my phone. First, I detect the all the driver that related with x10i and uninstall its driver completely. Then, I install the driver by disabling driver signature enforcement in windows 8.After that , the usual flashing to stock.
Click to expand...
Click to collapse
Maybe ask someone in ***FeraLab*** Official - Break The Limits. threat?
http://forum.xda-developers.com/showthread.php?t=1458001
as even am new around here i would suggest you to make at least 10 post then u can visit the above link and ask for help in that threat.
as you said the boot loader was locked and the flashing failed and you are stuck at sony erricson screen, i think you can use Sony PC Suite and restore it to factory (consult someone else too or search in the forums),
BLU in the Flash Tool is the one you should use first to Unlock bootloader, before that backup the device,
Advance\Trim Area\S1 and Raw Device., i did both the methods and i didnt knew what was the best
This [ROM] AOSP JB 4.2.2 - Unlock Bootloader Only, is the one i used and works perfectly fine on my xperia x10i :victory:
http://forum.xda-developers.com/showthread.php?t=2197387
hello
Thank you for having treated this thread because i didn't find any solution in the net and the only forum i feelt that he is good and i will find the help is yours so please i want your help.
I have nextbook premium 8 se and i use it well suddenly it shutdown and do not respond I did a long press on power but nothing i tried to do a reset with that little thing in the corner but nothing i tried to get access to recovery mode with pressing power and sound + but nothing it always blocked in the first logo. by the way my tab was rooted using the methode linked in " www"dot"freaktab"dot"com/showthread.php?6674-Amlogic-Next8HD8G-(NX008HD8G)-Modified-Recovery-Stock-Rom-amp-Flashable-Root " i used the modified recovery and the root package and it worked well with super su.apk.shoretly my nextbook premium 8 se c'ant boot can't have access to recovery mode to do a hard reset can't be open at all and stil freeze in the first logo until i long press the power so that it shutdown and the battery and tha charger ac worked well and the led also .
I followed many threads some use aml flach some use rk29upgrade.exe but my problem was that i didn't have a full rom package. also i tried to connect my tab with my pc so that i plug the usb and press power and sound - until my pc shows a new unknown device and failed in getting driver and in the device manager it shows M3-Chip after a long search i installed the driver libusb-win32-bin-1.2.6.0 so my tab was named worldcup device but still not detected by aml flach and also rk29upgrade !!!!! I didn't know what should i do i am a beginner in android world so i reach these information after a long nights in the net so please i need your help guys i know that you can do it !!!
brick
you now own a brick if you flashed an incomplete rom package.......you need the fastboot files, etc yada yada from who ever makes that tablet....then maybe just maybe you can turn your beautiful new brick back into a little android man once again...
I guess I cant post the stupid link but google android SDK tools and go to that website and download the tools and install the basic package for your tablet and make sure google usb drivers are checked when downloading it all.....you need that google driver so you can install it on your windows system so your computer can read the tablet....anyways do that install driver in windows device manager under that unknown device and then reboot everything and you should have a generic android driver now installed..............you flashed root so you never set up SDK so im guessing you don't have a clue as to why you bricked your phone but hopefully this will help.....if you do unbrick it then you have to use that link you posted....his stock rom and flash that over what you have on there right now and you should just stop trying to flash stuff until you have a clue as to how to fix the device BEFORE you start.....
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
My phone not detected on pc no fastboot no recovery blank screen. Can anyone help me
How did you manage to bricked it, please be specific with your problem.
sir it was bricked i tried to unbrick it for eMMC downloader but it failed
After searching i flashd moto e blank flash file i run the .bat filr it was flashed to my phone after that my phone was not even detected by my pc or any others i xanged cable but does not get connected
versatile ayushman said:
After searching i flashd moto e blank flash file i run the .bat filr it was flashed to my phone after that my phone was not even detected by my pc or any others i xanged cable but does not get connected
Click to expand...
Click to collapse
Well in that case you cannot do anything to unbrick it,
hi everyone i have a 10.1 " chinese tablet on an mtk6592 cpu with 3gb ram running marshmallow . i left it plugged into my windows 10 pc that was having issues with its modified xeon cpu . basically my daughter unplugged it from the pc used it then switched t off overnight next day it hangs on android screen and doesnt boot . adb doesnt see it so im assuming usb debugging is switched off . fastboot sees it but wont flash it.
when i boot it into recovery mode nd run a test it states it has a missing xbin file and 3 modified files but my daughter swerars she didnt root it or touch anything. now when i try to apply update from sd card it goes into the os on the tablet but doesnt list any files on the sd card . i have since swapped out the xeon for an old quadcore chip and reinstalled an os but went with linux mint . now i can only see the device in fastboot but not in adb and i get a mount error when i try to connect to pc in anything but fastboot mode . im no pro but im pretty competent on pcs but ive literally zero experience on android flashing etc all ive tried so far is from 3 weeks of reading forums online but im no closer to solving my problem does anyone have any ideas what i can do on a linux os . ps flashtool doesnt recognise it as connected either.
thanks for any help in advnce
I am having same problem
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
sagarrathee77 said:
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
Click to expand...
Click to collapse
no worries dude i think my daughter knocked something on the computer because i had installed kingo root to root a couple of android boxes and it was open when i came back to my machine
strongbow235 said:
hi everyone i have a 10.1 " chinese tablet on an mtk6592 cpu with 3gb ram running marshmallow . i left it plugged into my windows 10 pc that was having issues with its modified xeon cpu . basically my daughter unplugged it from the pc used it then switched t off overnight next day it hangs on android screen and doesnt boot . adb doesnt see it so im assuming usb debugging is switched off . fastboot sees it but wont flash it.
when i boot it into recovery mode nd run a test it states it has a missing xbin file and 3 modified files but my daughter swerars she didnt root it or touch anything. now when i try to apply update from sd card it goes into the os on the tablet but doesnt list any files on the sd card . i have since swapped out the xeon for an old quadcore chip and reinstalled an os but went with linux mint . now i can only see the device in fastboot but not in adb and i get a mount error when i try to connect to pc in anything but fastboot mode . im no pro but im pretty competent on pcs but ive literally zero experience on android flashing etc all ive tried so far is from 3 weeks of reading forums online but im no closer to solving my problem does anyone have any ideas what i can do on a linux os . ps flashtool doesnt recognise it as connected either.
thanks for any help in advnce
Click to expand...
Click to collapse
Did you install mtk usb drivers? If not, try to install it for SP Flash Tool to recognize your device. I also got the same problem before but installing mtk usb drivers solved it. It's worth a try. Hit thanks if it helped you.
---------- Post added at 11:11 PM ---------- Previous post was at 11:03 PM ----------
sagarrathee77 said:
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
Click to expand...
Click to collapse
Install SP flash tool, install mtk usb drivers, download the correct rom for your device. The zipped rom should come with a 'scatter file' when unzipped. Run sp flash tool as administrator load scatter file then when sp flash tool reads your device (you can see it at the boottom of sp flash tool window), click download and wait for it to finish. That should solve to bootloop. Hit thanks button if it helped you.