Related
Hi all,
Well ... I waste some hours trying to make a color profile of our phone screen and ... I did it ! I can say it wasn't easy ...
I was bored to make stuff in photoshop and have a different result on the phone screen, then go back to PS, then push again, PS again ....
Attached files:
-Graphic which shows that the screen color space is smaller than sRGB & Adobe98. We also have a low contrast ratio of 350.
-The color profile that you have to put in C:\windows\system32\spool\drivers\color
-Photoshop screenshot to enable the profile
--> When you make images modd in PS for your phone (don't forget to disable it when you work with normal pictures !), choose : menu>Display>Work format (I don't have the UI in english so I don't know the real name --> look at the screenshot), then choose the profile and tick "Keep RGB numbers".
You're now able to modd images that will appear like on the phone (not perfect but acceptable). If you load a SGS3 screenshot you will see the difference too (CTRL Y to toggle apply profile / no profile).
However, I'm using a high-end monitor which is perfectly calibrated so I can really see the difference (this is named softproofing (simulating the destination display device). Depending on how your monitor is far from the right calibration, the profile may be useless ... Try it ! or search for someone who have a colorimeter and calibrate your screen, the improvment is very great !
I've made this profile with Spyder3 Elite in a very strange way
Enjoy !
/
/
[Edit 1] Screenshot added as example : "Without profile" jpg is the one that is made by the phone (raw). "With Profile" jpg is the same after applying my color profile, and this one is very near what I can see when I look the phone. The difference is not small !
/
[Edit 2]
1) How to convert your screenshots:
In photoshop, choose Menu Edition/Assign a profile, and then choose the phone's profile. Then choose Menu/Edition/Convert to profile and choose the sRGB profile. Then save your image.
Now, posting your screenshots this way, they will appear like there are on the phone. (Depending on how well calibrated is the monitor's member).
2) If you have a photo wallpaper on your computer and want it to appear the same on the phone : choose Menu Edition/Assign a profile, and then choose the phone's profile
- For who can have a profile for its momitor, it's important too to use the Color Management plugin in Firefox ( the only one browser able to manage color profiles )
/
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!! [EDIT 3] !!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
There was a problem with some colors with previous color profiles.
When applying profile in photoshop with this V3 color profile :
- Select profile
- Untick Keep RGB numbers
- Select Relative color
- Tick Black point compensation
Now you will see in PS the colors like they will appear on your SG3 !
/
/
noob question
can u explain it in a simple language and wat is it exactly?
wat changes in phone and how to apply it..
vikraam said:
can u explain it in a simple language and wat is it exactly?
wat changes in phone and how to apply it..
Click to expand...
Click to collapse
Color Management is not an easy thing to understand at all. It can be a sbject of PhD ! And my bad english does not help to explain ...
The profile is usefull for who makes themes (it's not to implement into the phone):
-When you work on android's images in photoshop, what you see is not what you see when it is on the phone.
-With the profile you can :
--> See in photoshop what you will see when the image will be on your phone. It helps a lot ! Before making the pofile I was making changes, pushing them to the phone and then going back to photoshop (it was looking good in photoshop but not on the phone)
--> When you take a screenshot on the phone, the image is raw without any color profile, ugly ! Applying my profile you can visualize the screenshots on your computer like it appears looking at the phone. It's good to apply the profile to the screenshots before posting. At the present time the screenshots available on the forum does not correspond to reality. I will add a small tutorial to do that.
you get it ?
ok now i understood it. Im learning to make themes actually. So this wil help me
vikraam said:
ok now i understood it. Im learning to make themes actually. So this wil help me
Click to expand...
Click to collapse
I hope so ! See if someone or some store can lend/rent you a colorimeter to calibrate your monitor. I can warranty that this will change your editing experience ! You will be surprised visualizing your photos ...
Unfortunately, monitors even high-end, are sold without being calibrated .... The Delta can be very huge !
all i see in the 2 screenshots is that one is brighter than the other
i dont get it
in 1 post u say we can view the images before pushin it in the phone
n the other post u say it improves ur viewing experience like improves the quality??
i m viewing these photos on a netbook i dont if that makes a difference
so if u could please explain me again
AacidD said:
all i see in the 2 screenshots is that one is brighter than the other
i dont get it
in 1 post u say we can view the images before pushin it in the phone
n the other post u say it improves ur viewing experience like improves the quality??
i m viewing these photos on a netbook i dont if that makes a difference
so if u could please explain me again
Click to expand...
Click to collapse
Color management is a headache subject ...
The purpose is to get the same visual result on the phone and on the computer. The fact is that you don't have my phone so you can't see that the second picture looks like the phone and not the first one.
Actually, your case is not surprising : in general (90% ?) netbook's screens are very bad (poor color range and very sensible depending on what angle you are looking it) and of course non calibrated. So it's not a surprise you're not viewing a lot of diference.
Even like that, if you can calibrate your netbook screen there will be a significant improvment to view photos and other stuff.
Thanks!
I've been trying to solve different looking colors problems for a while now.
How did you create the profile?
undsoft said:
Thanks!
I've been trying to solve different looking colors problems for a while now.
How did you create the profile?
Click to expand...
Click to collapse
I'm pleased to know someone is using this profile and finding it usefull !
It was'nt easy to make it :
- 1st, I ran Basiccolor display calibration soft with my Spyder 3 colorimeter, on my computer screen, and make screenshot of each pattern color.
- then I put the images on my sdcard's phone
- then search for an image viewer able to switch picture by clicking a button. I found one where you can configure the button you want to use.
- then, ran calibration soft on computer, holding colorimeter on the screen phone and clickin the button just in time (at each color measure).
I will not do that again !
V3 profile available
UP !
see first post [EDIT 3]
Updates:
I can't stop touching my phone!
BIG UPDATE Liquid Version 3 22.09.2012:
So much new stuff: New Objects, New Features, New artworks, New Settings, many Fixes and Changes, improved stability.
New Objects:
-The amazing Color Fluid Surface(including; Liquid Colors, Anti-Color, Particles, a swimming Object, Connections to other Objects, own new sub-section in Settings)
-Full Screen Image(just shifting a little with homescreen)
-New Liquid Beta-Particles (linked to the Fluid Surface to make, 2 fluid physic engines connected driving each other!)
-The amazing Color Fluid Surface:
Get a realy liquid screen.
Make fine colorfull swhirls with each finger or mix the whole fluid witch all touch points.
Continuously auto-selecting the "next most-amazing color" for each touch point.
See the colors mixing transparent on any background.
Finger 4 bill dropp Anti-Color, the mathematical opposite of Color. Anti-Color and Color will be colorfull neutralized against each other. Naturally Anti-Color is invisible but I found a way to show it. It´s enabled on default and will change to it´s naturally invisibility if switching to "Inverse Fluid Colors".
The Engine has it´s "own" swimming Particles and a swimming customizable Object.
Some Objects are connected to the fluid and will swimm in fluid and/or add forces to it.
The Fluid Particles are very fine and have some options, you can select an independent build-in texture to keep them look Particle-like while using any Picture on other Objects.
Fluid Surface code is great but calculated on cpu and needs power at higher fluid resolution. This needs some optimizations, I will try to move some expensive calculations to faster scripts or buffer-array-operations to make it run faster at higher resolutions. Rendering fluid is already fast.
-Static Background Picture. It´s just shifting a little with homescreen. If you select a not-transparent Picture, background will hide the 3D-Android and the 3D-Background Particles, so don't forget to disable hidden Objects to safe power.
-New Liquid Beta-Particles.
Interesting dynamic physics. Connected to Fluid Surface, if active together, engines will move each other, result will move very dynamic or chaotic.
Beta because unoptimized, slow, cpu draining, laggy touch and unstable physics could force close somtimes because moving out of bounds. But It can blast the Fluid
-New Image Artworks all supporting Transparency:
If you want to use old removed Images, you can extract the Images from old apk file.
-New Settings. Added icons to most options. Select Picture direct from Image-Buttons.
As simple and friendly as possible.
Linked gravity-sensor-delay to framerate slider to make it fast or power-safing together.
Added info and contact button linked to this thread(nothing else online yet).
Wallpaper runs fine without sdcard now. Just Cropping Image is not possible without sdcard reasonable.
- Build on Android 4.1.-, minimum required Android 2.2.
Runs Best on 4.1 with "additional features" and best stability. Settings Icons will not be visible on older Androids than 2.3.3 if I am right.
Runs on every phone and virtual device I tested. Also it runs on my TegravII Tablet on Android x86 4.0 R2 but only the 3D-Android is shown and changing Picture works but everything else not. So I will try to get it running complete on not fully compatible Android x86 later.
-Bugs: Nothing is realy broken for me. For left bugs seems just trying again makes it fine.
Loading or Cropping Pictures could still fail on bigger images or incompatible formats. I will rework the image handling a little softer to make this stable. Unfortunately Wallpaper can force close on first start in some cases.
This was next step to get everything ready for more interesting stuff.
Please send some feedback after testing.
______________________________________________________
______________________________________________________
Update II : 20.07.2012
I like it now. XDA-Texture is attached right way. I added perlinNoise like wavy movement to get it a little more interesting and flaglike.
No more forceClose in settings menu but still no effect on now selectable options. Next step= Lsd-colors(see LsdCam effect1) and settings. Will see to get the waves more harmonic and with some settings and more(maybe custom) images and it should be fine for first effect.
Have to come more and better.
Update 4 (26.07.12) : LSD-Wallpaper V4 XDA-Version V3! Resize and own Pictures.
Wallpaper should work on any display resolution.
-Options are working. -
-3 build in images or load own picture. Picture will be resized on load. Transparent png working.
-You can toggle waves on or off now..
Wallpaper is funny with own pictures of peoples and faces.
Issues:
If you want to use options to load own foto.png or own foto.jpg there must be the files foto.png or foto.jpg direct on sdcard, else it will forceClose. Will add a album selection with cropping there.
If you toggle waves on or off it will load xda image, so you have to select the picture you want again after toggling waves.
LsdWallpaper is drawing delayed @ 30fps while not consuming much power. Also it should release resources on hide so it should only consume power if you (could)see it. I can confirm the mesh dont moves if phone is locked. Also fps, texture- and mesh-resolution will be adjustable in settings.
This runs on other roms and display resolutions on emu, should run on most Android Phones now. should we give it to all Android phone section? I will not give them 3D if it is finished
leonardusbayu said:
Stereoskopic live wallpaper.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
You are right, I will try, I will have it also. But this will take some time.
Update: XDA-Version V1! There was not much time but here is the Result so far. Will add more effects and more options (current option is without effect). (Multi)-Touch to see XDA-logo. Note:Image is not attached the way it should and will be but this is also just a nice and free multitouch XDA-Life-Wallpaper. Works nice with the attached analog clock from the Android IDE.
It´s Live-Wallpaper-Whish-Week,
So please post any whish how your favorit dream live wallpaper should be and I will do my best to release it here (if I like the idea).
While porting my LSD-Cam to latest Android-Apis for supporting ICS-Roms I started creating life Wallpaper.
This I am currently locking into Android drawings and will attatch Textures first to my physics and implement many Effects for easy creating intresting and custom Live Wallpapers also for XDA community. This will keep some days, Eclipse-Android is not so diffrent to my mother language processing and everything runs like suspected, it is "just" porting to diffrent drawings and handlings.
so you may post whishes for wallpapers.
Also I will be able to create widgets, lockscreens or any professional android content.
Also I will look int 3D to bring up stereoscpopic content(I am also 3D-Master )
Works very well, looking forward to see more options
aSiD1712 said:
Olny multitouch particle grid yet but my code. While porting my LSD-Cam to latest Android-Apis for supporting ICS-Roms I started creating life Wallpaper.
This I am currently locking into Android drawings and will attatch Textures first to my physics and implement many Effects for easy creating intresting and custom Live Wallpapers also for XDA community. This will keep some days, Eclipse-Android is not so diffrent to my mother language processing and everything runs like suspected, it is "just" porting to diffrent drawings and handlings.
so you may post whishes for wallpapers.
Also I will be able to create widgets, lockscreens or any professional android content.
Also I will look int 3D to bring up stereoscpopic content(I am also 3D-Master )
Click to expand...
Click to collapse
Nice to see this coming. Anyway is that possible to run a 3d live wallpaper
Sent from my PG86100 using xda app-developers app
Update: XDA-Version V1!
Update: XDA-Version V1!
There was not much time but here is the Result so far. Will add more effects and more options (current option is without effect). (Multi)-Touch to see XDA-logo. Note:Image is not attached the way it should and will be but this is also just a nice and free multitouch XDA-Life-Wallpaper. Works nice with the attached analog clock from the Android IDE.
It´s Live-Wallpaper-Whish-Week,
So please post any whish how your favorit dream live wallpaper should be and I will do my best to release it here (if I like the idea).
Stereoskopic live wallpaper.
Sent from my PG86100 using xda app-developers app
Update III : LSD-Wallpaper V3 XDA-Version V2! Great Multitouch Action in XDA Design!
Update III :
I like it now. XDA-Texture is attached right way. I added perlinNoise like wavy movement to get it more interesting and flaglike.
No more forceClose in settings menu but still no effect on now selectable options. Next step= Lsd-colors(see LsdCam effect1) and settings. Will see to get the waves more harmonic and with some settings and more(maybe custom) images and it should be fine for first effect.
Have to come more and better.
LsdWallpaper is drawing delayed to 30fps while not consuming much power. Also it should release resources on hide so it should only consume power if you (could)see it. I can confirm the mesh dont moves if phone is locked. Also fps, texture- and mesh-resolution will be adjustable in settings.
This runs on other roms and display resolutions on emu, should run on most Android Phones now. should we give it to all Android phone section? I will not give them 3D if it is finished
leonardusbayu said:
Stereoskopic live wallpaper.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
You are right, I will try, I will have it also. But this will take some time.
Download:
Very great: I downloaded AIDE from PlayStore, copied eclipse wallpaper project to sd card and could build it without changing anything.
So I can code and compile on phone in a great way. Thanks AIDE!
Right now I am implementing sterescopic 3d for the evo3d to the live wallpaper.
Update 4 : LSD-Wallpaper V4 XDA-Version V3! Resize and own Pictures.
Wallpaper should work on any display resolution.
-Options are working. -
-3 build in images or load own picture. Picture will be resized on load. Transparent png working.
-You can toggle waves on or off now..
Wallpaper is funny with own pictures of peoples and faces.
Issues:
If you want to use options to load own foto.png or own foto.jpg there must be the files foto.png or foto.jpg direct on sdcard, else it will forceClose. Will add a album selection with cropping there.
If you toggle waves on or off it will load xda image, so you have to select the picture you want again after toggling waves.
When you hand your phone to granny to take a photo of you, can she get the job done? Rate this thread to express how you deem the LG G6's camera software. A higher rating indicates that the software is easy to use, fast, uncluttered, and inclusive of advanced features for when you need them.
Then, drop a comment if you have anything to add!
This is some of the best software I have ever used with a camera. It can run in manual and it is very well fine-tuned. I also like that when you're in manual, you can "level" the phone as there is a graphic that appears to show you if you are tipping the phone in the shot.
The White balance (color temperature), ISO, shutter speed, EV(?), Manual Focus is possible in manual mode... HDR can also be turned on and off or left on "auto".
There are filters and lots of cool "modes" you can play with. There is also a "pop out" feature that uses both of the back cameras to create an inset image (which is customizeable with filters, different shapes, etc)
The selfie camera has lighting settings, filter and skin tone as well. Lighting adds more light to your face and skin tone basically adds a gaussian blur to your face if you want to give the appearance of faux smoother skin.
You can take advantage of the extra screen real estate and put a pop-up "camera roll" on the side to setup new shots based on past ones.
is it still the 5 min recording limit for 4K due to heating ? which LG v10 also has??
hellowords said:
is it still the 5 min recording limit for 4K due to heating ? which LG v10 also has??
Click to expand...
Click to collapse
So what happens when you try to record again right after you just filmed? A warning too cool down/wait 5Min.?
Adequate, but difficult to use and over -difficult to use. Very difficult to navigate and understand within the application.
This phone has one of the best implementation of OEM skin over android. Its super light overlays and not trying to do too much in terms of animations and gimmicks. UX 6.0 has a consistent and proportional feeling throughout all the system apps with strict adherence to material design guidelines.
I highly recommend the following settings to take advantage of the insanely dense and crisp screen on this device and to best showcase the UX 6.0 UI themes.
# On Display settings
-- Set display size to smallest (makes the nav bar look apt-ly sized and frees up real estate)
-- Use LG's font instead of Roboto (this font is incredibly crisp on screen and uber readable)
-- Use bold settings for font (helps readability insanely, esp after setting the display size to small)
# On developer settings
-- Set animation speeds to 0.5x on all three animation types
-- Force GPU rendering for 2D
# Use a Dark Theme
-- Use a dark theme or black theme, default one is too bright to my taste.
I'm coming from a Oneplus3T who's OxygenOS had rave review for being a tastefully functional AOSP+ implementation of android. UX 6.0 takes it a notch up on the design side and is more refined than OOS. I wish they get to 7.1.2 soon to take advantage of the battery life improvements, otherwise this one's been mighty impressive so far compared to the experience i had on Oneplus3T.
subashchandran said:
This phone has one of the best implementation of OEM skin over android. Its super light overlays and not trying to do too much in terms of animations and gimmicks. UX 6.0 has a consistent and proportional feeling throughout all the system apps with strict adherence to material design guidelines.
I highly recommend the following settings to take advantage of the insanely dense and crisp screen on this device and to best showcase the UX 6.0 UI themes.
# On Display settings
-- Set display size to smallest (makes the nav bar look apt-ly sized and frees up real estate)
-- Use LG's font instead of Roboto (this font is incredibly crisp on screen and uber readable)
-- Use bold settings for font (helps readability insanely, esp after setting the display size to small)
# On developer settings
-- Set animation speeds to 0.5x on all three animation types
-- Force GPU rendering for 2D
# Use a Dark Theme
-- Use a dark theme or black theme, default one is too bright to my taste.
I'm coming from a Oneplus3T who's OxygenOS had rave review for being a tastefully functional AOSP+ implementation of android. UX 6.0 takes it a notch up on the design side and is more refined than OOS. I wish they get to 7.1.2 soon to take advantage of the battery life improvements, otherwise this one's been mighty impressive so far compared to the experience i had on Oneplus3T.
Click to expand...
Click to collapse
Tried your settings....Looks good...Thanks
---------- Post added at 03:46 PM ---------- Previous post was at 02:50 PM ----------
subashchandran said:
This phone has one of the best implementation of OEM skin over android. Its super light overlays and not trying to do too much in terms of animations and gimmicks. UX 6.0 has a consistent and proportional feeling throughout all the system apps with strict adherence to material design guidelines.
I highly recommend the following settings to take advantage of the insanely dense and crisp screen on this device and to best showcase the UX 6.0 UI themes.
# On Display settings
-- Set display size to smallest (makes the nav bar look apt-ly sized and frees up real estate)
-- Use LG's font instead of Roboto (this font is incredibly crisp on screen and uber readable)
-- Use bold settings for font (helps readability insanely, esp after setting the display size to small)
# On developer settings
-- Set animation speeds to 0.5x on all three animation types
-- Force GPU rendering for 2D
# Use a Dark Theme
-- Use a dark theme or black theme, default one is too bright to my taste.
I'm coming from a Oneplus3T who's OxygenOS had rave review for being a tastefully functional AOSP+ implementation of android. UX 6.0 takes it a notch up on the design side and is more refined than OOS. I wish they get to 7.1.2 soon to take advantage of the battery life improvements, otherwise this one's been mighty impressive so far compared to the experience i had on Oneplus3T.
Click to expand...
Click to collapse
Tried your settings....Looks good...Thanks
using open camera
Coming from mi 5, this mobile is excellent in terms of hardware and software needs to improve more. Previously had g2 which was perfect in all aspects. My sincere suggestion is improve the rom like miui. It has better features and doesn't lagg or hang.
If anybody wonder how to enable volume bar (yes it's very hidden xD) here is instruction https://forum.xda-developers.com/showpost.php?p=75512773
In Miui You can change Display temperature From Normal To Warm Or Cool
But when using custom rom like Aex or Lineage i can't find that choice
the screen is really warm and white color is almost yellow
please i need any solution for this i want to make the screen contrast cool Like Miui
Thanks i really appreciate your quick answer
Theres color profile option in livedisplay setting on los based roms, use that.
i tried it but it can't make white color looks really white
GnehWnos said:
i tried it but it can't make white color looks really white
Click to expand...
Click to collapse
Use Kernel Auditor app..and if your kernel support kcal you can calibrate the display color profile.
Would You please Explain what is kcal ??????
GnehWnos said:
Would You please Explain what is kcal ??????
Click to expand...
Click to collapse
Its an module for Advanced color control for Qualcomm MDSS 8x10/8x26/8974/8084/8939.. your kernel have to be supported to make fully use of it. check thishttps://forum.xda-developers.com/android/software-hacking/dev-kcal-advanced-color-control-t3032080
The los livedisplay also got manual color calibration option, that should be enough to tinker by your own to get however white you want.
fzhadi said:
The los livedisplay also got manual color calibration option, that should be enough to tinker by your own to get however white you want.
Click to expand...
Click to collapse
Not really...on livedisplay there are only tweaks for the screen RGB color which is not enough in many situation...in KCAL you have screen value and contrast value and minimum sRGB value those are valuable option to tweak... that's why I've told you...now its up to you.
Hopefully.
Tested on: RR ROM (not GSI) from https://build.lolios.ml/sirius/
GCam version: Arnova's Advanced 1.5 Download
Config xml file: see attachments Alternative Download
Disclaimer
If you're not using my same setup I can't guarantee the same results, though I think this should apply, for the most part, no matter the ROM you're using. If you're using a GSI I think it should work the same as long as you have flashed the gcam fix zip (or Magisk module).
Introduction
I chose Arnova's mod because it's the most customizable out there. To get it working straight out of the box:
Install GCam
Create directory /sdcard/GCam/Configs if it doesn't exist
Move xml config file to the directory
Long press on the GCam icon and select "Take a video"
Double-tap on empty space below shutter
Choose the xml file from the menu and click restore
Step 4 is necessary because trying to lauch with the defaults options results in a crash, but not in video mode. We're using this as workaround to import the settings in order to fix the crash and configure the camera.
I'll now describe every setting that I chose to edit so that you can understand why I set it up the way it is. Most of these settings are based on personal preference so feel free to experiment for yourself.
Settings
Mod settings - Advanced - FIX - RAW10 in front
Enabled.
Fixes the camera crash on app launch.
Mod settings - Advanced - FIX - Buffer Fix
Enabled.
Fixes viewfinder lag. Doesn't fix it for Night Sight. Also, I remember this wasn't needed when using GSI + gcam fix zip so if you're using a GSI maybe try disabling this and see how it goes.
Autoexposure correction
1/10 sec.
This setting is very important. It controls the balance between noise and blurriness / time it takes to shoot a frame.
Basically, here's what this does. When you take a picture there are a few factors that influence how bright the picture will be. These factors are width of the objective, time the camera spends taking the picture (also known as shutter speed) and the sensor sensitivity (also known as ISO). Unlike regular cameras, the width of the objective is fixed (I believe) so on our phone we're limited to ISO and shutter speed. The longer the shutter speed, the more time the sensor is exposed to light, the brighter the picture. If you're not steady though, longer shutter speeds will result in blurry photos. Increasing ISO, on the other hand, will allow you to keep shutter speed low and have sharp images, but will significantly increase the amount of noise in the picture.
What this setting does is set a limit to how high the shutter speed can get before it will resort to increasing ISO if it needs to. The default settings of Off gave pretty bad results for me - picking 1/50 and 2000+ ISO where 1/10 and 300 ISO did perfectly fine - though feel free to experiment for yourself. Keep in mind the actual time to take the pic will be at most this setting times the HDR+ parameters setting. So if you have the default setting of 9 for HDR+ and 1/10 like I do it will take at most 0.9s to take a picture.
Correction NightSight
1 sec.
Same as Autoexposure Correction but for Night Sight mode. I set this to a very long time but it's totally personal preference so feel free to tweak this. As you may have guessed, I really dislike noisy pictures...
Pixel 3 AWB
Enabled.
See the GCam ports site relative FAQ.
I found it produces warmer colors. It also seems to only work if you use Pixel 3 or Pixel 3XL as models. Feel free to change.
Mod settings - Advanced - Base - Model
Pixel 3 for both cameras.
Tested other models and didn't find any difference except Pixel 3 AWB stopped working except for Pixel 3XL.
Mod settings - Advanced - Noise reduction
Everything disabled.
Trying enabling them but they didn't really seem to work so I left them off.
Mod settings - Advanced - FIX - Using Sabre
Auto.
Sabre FAQ. I left Auto because I have no clue what that's supposed to mean. Tried both On and Off and they worked but I couldn't spot a difference. It supposedly makes pictures better though, so set to On if you'd like.
Mod settings - Advanced - Libs
Stock by Google.
I just left the default because I tried the other ones and found no difference. Try them for yourself if you feel like it.
Mod settings - Advanced - Enable Auto exposure
Disabled.
This is weird one, most of the times it crashed the app right after shooting (didn't store the pics), other times it worked but I saw no difference. Don't think we're missing out on anything.
Photo - Advanced - "Motion" function
Disabled.
Enabling crashes the app, it might work with different models settings / configs (in Mod settings - Advanced - Base) but I didn't bother because I don't really care for it. If you somehow get it to work, please report back. Thanks!
Photo - Advanced - Optical Stabilization (OIS)
Disabled.
MI 8 SE doesn't have OIS. Not much to say.
Video - Advanced - Init SlowMo with
120 FPS.
Setting this to 120 FPS instead of the default 240 FPS allows to use both 1/4 and 1/8 speed for slow motion.
By the way, I believe that while most of this guide should also apply to GSIs, iirc slow-mo is broken on GSI and there's not much you can do about it. Sorry.
I hope to have cleared up the confusion about GCam, I surely was very confused when I first started looking into it and was quite overblown with all the settings.
Let me know if you know about anything that could be added to the guide.
Thank you!
I can't do the "Long press on the GCam icon and select "Take a video" in MIUI
CoizSola said:
I can't do the "Long press on the GCam icon and select "Take a video" in MIUI
Click to expand...
Click to collapse
True, it's a limitation of the default MIUI launcher. You can install a third party launcher temporarily and use that. To my knowledge there's no other way around it, unfortunately.
Thanks for this thread. There is something wrong about xml file. I am not able to download it via three different browsers. Could you please upload it anywhere else?
TacoNikky said:
Thanks for this thread. There is something wrong about xml file. I am not able to download it via three different browsers. Could you please upload it anywhere else?
Click to expand...
Click to collapse
Updated the OP, thanks for letting me know.
pixel launcher
guglicap said:
True, it's a limitation of the default MIUI launcher. You can install a third party launcher temporarily and use that. To my knowledge there's no other way around it, unfortunately.
Click to expand...
Click to collapse
you can install pixel launcher its works
OMG :victory: This is best GCam i've ever used.
Photo quality(lowest noise) and colors are really changed. Thanks for your hard work
TacoNikky said:
OMG :victory: This is best GCam i've ever used.
Photo quality(lowest noise) and colors are really changed. Thanks for your hard work
Click to expand...
Click to collapse
Glad to hear that! The reduced noise is just the result of the shutter speed setting, I'm still very doubtful about setting 1/10 as limit, sometimes I feel like it's way too long... Especially because it seems like once you've set it it becomes super aggressive in picking it instead of a more sensible combination like 300 ISO - 1/50 shutter speed.
guglicap said:
Glad to hear that! The reduced noise is just the result of the shutter speed setting, I'm still very doubtful about setting 1/10 as limit, sometimes I feel like it's way too long... Especially because it seems like once you've set it it becomes super aggressive in picking it instead of a more sensible combination like 300 ISO - 1/50 shutter speed.
Click to expand...
Click to collapse
Better quality photos are more important than waiting(shutter speed) in my opinion. Colors are sharp and contrast is higher than standart gcam. These settings give really good results. Sharp and clean photos :good:
The app crashes every time I take photos with hdr+ off. And in BSG v2e the shutter speed of hdr+ is so much faster than hdr+ enhanced which is useful if I want to take photos in crowded places
CoizSola said:
The app crashes every time I take photos with hdr+ off. And in BSG v2e the shutter speed of hdr+ is so much faster than hdr+ enhanced which is useful if I want to take photos in crowded places
Click to expand...
Click to collapse
True, thanks for the report. I'll try and see if I can find a workaround. Shutter speed gets faster if you set Autoexposure correction to off, but ISO gets a lot higher as a result and produces very noisy pics.
guglicap said:
True, thanks for the report. I'll try and see if I can find a workaround. Shutter speed gets faster if you set Autoexposure correction to off, but ISO gets a lot higher as a result and produces very noisy pics.
Click to expand...
Click to collapse
And also, I hope we can use the 20MP front camera. The 5MP limit looks pretty bad.
CoizSola said:
And also, I hope we can use the 20MP front camera. The 5MP limit looks pretty bad.
Click to expand...
Click to collapse
That looks like it's a ROM issue since even the stock camera app shoots at 5MP
Thanks friend it's working but there's a lag in night sight's viewfinder.. Can u tell me how to fix it? I've tried a lot of gcam version but nothing works.. I'm using miui 10.3.1.0
Merackball said:
Thanks friend it's working but there's a lag in night sight's viewfinder.. Can u tell me how to fix it? I've tried a lot of gcam version but nothing works.. I'm using miui 10.3.1.0
Click to expand...
Click to collapse
Yeah, as far as I know it's not fixable... it only worked after flashing the GCam fix zip but that seems to be causing issues in MIUI so I don't know.
Thx for share ur experience, but i hv issue slow capture for front camera, how fix it ?
Hi guys try bsg's gcam mi9se v0d, it's working for mi8se..
its work flawlesly on official dot-extended 3.3
need to un-check buffer fix
everything work except photobooth
thank you. i now.have.a working gcam
I installed this but nighs mode lags a lot, what can I do?