My Power button of my Realme 3pro is always pressed, I tried doing some stuff, Ended up restarting my phone. Fortunately USB Debugging is enabled on my device, Is there anyway to disable power button using adb/ usb debugging. I can't open lockscreen, login to the device as power button is always pressed and can't access pin entering screen and fingprint option doesnot works after restart.
Related
My friend thought that to change from android to webos he had to press the power button and volume up to enter moboot, but he enter to the bootloader mode (big usb connection icon). I tried to power it off and combine power button and volume to see if I can get out of this and nothing. The only solution is to wait for the charge to deplete?
EDIT: It turned off by it self this thread can be close.
just so you know for the future, holding the power button along with the center button for a few seconds does a soft reset even while stuck in recovery or while booted in webos.
Dear All
My Ideos slim 7 touchscreen is not working since a few days, and the usb debugging mode is OFF
I tried to re-install many firmwares ( the original one, MTN firmware etc), but the problem persists
is there a way to turn the usb debugging mode to ON from the computer so that I can use the fastboot ?
Thank you
BR
Touch screen issues
Zimsana said:
Dear All
My Ideos slim 7 touchscreen is not working since a few days, and the usb debugging mode is OFF
I tried to re-install many firmwares ( the original one, MTN firmware etc), but the problem persists
is there a way to turn the usb debugging mode to ON from the computer so that I can use the fastboot ?
Thank you
BR
Click to expand...
Click to collapse
I have the same problem. What I did was connect a wired keyboard to my s7 slim(with micro usb adaptor). Most keys won't respond. Press the F1 key, a menu at the bottom of the screen pops up. Scroll using the arrow keys to settings. In the application section using the arrow keys scroll down to developement mode and press enter on the keyboard. You then use to check debugging mode. When you are done, press the home key and it will take you back to the home screen. To shut down press the power button, scroll down, press shut down and hit enter on your keyboard. I was able to activate debugging mode and root my tablet, but after reinstalling the firmware my screen still does not respond.
Okay i have this radar that i am trying to perform a hard reset on but the anytime i do the press volume button and then power all it does is turn the device on. And then when i just hold the down volume key when its turned off the device enters into enter usb host mode. So i was wondering what i should do to perform the hard reset. And if i am on the enter usb host mode screen is that the screen for changing roms and stuff like what exactly is that screen. Thanks!
Afiaus said:
Okay i have this radar that i am trying to perform a hard reset on but the anytime i do the press volume button and then power all it does is turn the device on. And then when i just hold the down volume key when its turned off the device enters into enter usb host mode. So i was wondering what i should do to perform the hard reset. And if i am on the enter usb host mode screen is that the screen for changing roms and stuff like what exactly is that screen. Thanks!
Click to expand...
Click to collapse
NO...! from usb host mode u cant directly change the rom unless & until it gets patched by the HSPL...! u just try to hold UP+DOWN volume key and then press POWER button,while pressing POWER button dont release the Volume keys....!
My tablet is half bricked and i'm trying to format it i can get into the recovery without releasing the power button and pressing volume up (if i release the power button it won't open) and i can move at the menu still not releasing the power menu with volume keys but i can't use the power key because if i release it tablet shuts down so i can't format i don't have root or usb debugging enabled so i can't use adb what should i do
Help
Hi all,
Today while using my phone, it suddenly got hang, and so i tried to reboot it by firing power button, since then it's stuck on
boot screen.
It's not entering recovery mode.
USB debugging was not enabled.
Tried flashing, however hone is not detected by flashtool.
I have tried everything, Please help me!
Hi,
Tried hard reset ?
Mobile off, press simultaneously and for a long time on the on / off and volume + keys. The mobile vibrates then turns on (Mi screen).
Release the buttons and immediately (for several seconds) press the volume key -. A new screen (Main Menu Mi-Recovery 3.0) appears.
Using the volume key -, select Wipe data and confirm with the on / off key. The mobile displays a new screen.
Validate Wipe All Data. with the on / off button.
The mobile displays Confirm Wipe of All Data this cannot be undone
Using the volume key -, select Confirm and confirm with the on / off key.
The mobile proceeds to erase the data. At the end, a new screen appears (Data wiped Successfully). Press the on / off button.
The Mi-Recovery 3.0 Main Menu screen is displayed, with the on / off key validate Reboot. A new screen appears.
"Tried flashing, however hone is not detected by flashtool."
"I have tried everything, Please help me!"
1. For sure it will not be detected by flash tool, and for sure you didn't tried everything because in order to flash your device you need to put your device into EDL mode known as Emergency Download Mode.
Here is example which point you need to short with wire ot twizzers and plug usb in while you are holding those pins...
https://gsm5g.mobie.in/Mobile/Edl/Redmi_note6_pro_testpoint.jpg
Good luck...