In my experience they are great! Slight extra grip, very scratch resistant. and no bulk.
I highly suggest this if you want the look of a neat case and scratch guard, but it DOES NOT protect if you drop your phone.
I cleaned my phone well with Rubbing alcohol & a cotton pad to get any oils, dirt, or fingerprints off.
The material they use is a high quality slightly textured vinyl, it is very very sticky so try to line it up the best you can before pressing it down, start at one end and be sure to keep all air bubbles out.
the downside is when i was peeling the back off to realign. It pulled some of the paint off the backing of my phone. it was already worn out, i doubt it would happen if you had a clean scratch/chip free phone.
They also come with a neat matching background that lines up pretty well with the front cover, I only have it on the lockscreen due to the homescreen having the "panoramic/wide view"
The way its cut out, you have to line it up just right or the corners will have bumps, and you could easily cover a front button/power button/headphone jack.
Pics are of my phone with my Skinguardz with black/pink Skulls & Diamonds print.
Howdy all,
What size double sided tape should I use to stick my Asus TF201 digitizer and LCD back together? I have 3 options, a 1mm, 2mm and 3mm double sided tape. Not sure whats on it now, but if anyone has an idea I'd really appreciate it.
Thanks
Nightpath said:
Howdy all,
What size double sided tape should I use to stick my Asus TF201 digitizer and LCD back together? I have 3 options, a 1mm, 2mm and 3mm double sided tape. Not sure whats on it now, but if anyone has an idea I'd really appreciate it.
Thanks
Click to expand...
Click to collapse
I recommend not using any foam tape at all to stick the digitizer to the LCD. I thought there'd be light leaks if I didn't. There were no light leaks. I used double-sided scotch tape to stick the digizer to the front bezel. It worked very well.
If you *do* use foam tape to stick the LCD to the digitizer, you'll go ape-**** crazy if you notice any fingerprints or particles on the inside of the digizer. Without sticking the two together, you can easily separate the two if you need to.
So double sided scotch tape eh? Whats the difference, just easier to take apart if you have to?
Might be an idea, seems to be more of it around here and waaayyy cheaper
Would this be it (put in b0p 1n0 if it asks for a postal code)? : http://www.staples.ca/ENG/Catalog/c...191,4,6&name=CA_SK_SCOTCH+-+Double-Sided+Tape
here's another, says it's removeable tape so I don't think that's a great idea : http://www.staples.ca/ENG/Catalog/cat_sku.asp?CatIds=3,3191,4,6&webid=33734&affixedcode=WW
Here's mounting tape, would this work too you think? http://www.staples.ca/ENG/Catalog/cat_skuset.asp?CatIds=3,3191,4,6&name=CA_SK_3M+-+Mounting+Tape
And here's a tape of MC Hammer : http://www.youtube.com/watch?v=otCpCn0l4Wo
LOL on the MC Hammer!
On the mounting tape, keep in mind that the Prime's display has two types of mounting tape. The digitizer glass is affixed to the plastic bezel with very thin (and very sticky) double-sided celophane type adhesive. Then, the LCD is affixed with black foam tape (and screws). i used the Scotch tape to stick my digitizer to the bezel. This had the advantage of being very easy to trim with an exacto. I chose not to use any foam tape at all with the LCD and just rely on the screws to hold it in place. I was needlessly worried about light bleed. It did not. It was fine.
By not using foam tape, I had the HUGE advantage of being able to later remove a tiny speck of debris that got sandwiched between the LCD and digitizer. It was very small, but drove me nuts. If I had used foam tape to mount the LCD, the risk of breaking the damned thing again would have been too great to try removing the speck. It'd still be there.
I highly recommend not using any foam tape. At least try without first. You can always add it later if your heart is set on it. I've read other threads where folks ended up breaking the digitizer or LCD when having a foam-tape malfunction (stuck to the wrong spot, wasn't lined up right, etc.).
I don't use cheap tape or scotch tape (3m) as generally it's not sticky enough for most jobs like this.
I highly recommend mammoth tape for this job. https://www.google.co.uk/search?q=m...AW81oG4Bg&sqi=2&ved=0CFoQrQQ&biw=1067&bih=693 don't get the one with the cloth membrane (labeled as Heavy duty double sided tape) as its too thick and very hard to cut, the one you need is labeled "multi purpose double sided tape".
I get it from a builders merchants but you can get it online. I have tried many brands and alternatives but mammoth is the best stuff I have found.
Ultimately folks can do whatever they want and feel comfortable with. I would council any close friends to just go with the double-sided Scotch tape to stick the digitizer glass to the bezel. It's plenty sticky enough and there's enough (around 1m total perimeter) that you get a good stick. BONUS: It's good and cheap.
With as fragile as the digitizer glass is, you really don't want to screw around with ridiculously sticky adhesives. On the likely chance (unless you're a pro) that you don't set the glass in the bezel just right, highly sticky adhesive is going to make repositioning much harder and you may very well break the new glass trying to reposition.
I highly recommend not using any adhesive at all to hold the LCD to the digitizer for the reasons I've already mentioned. You'll really wish you hadn't.
Jgrimoldy said:
Ultimately folks can do whatever they want and feel comfortable with. I would council any close friends to just go with the double-sided Scotch tape to stick the digitizer glass to the bezel. It's plenty sticky enough and there's enough (around 1m total perimeter) that you get a good stick. BONUS: It's good and cheap.
With as fragile as the digitizer glass is, you really don't want to screw around with ridiculously sticky adhesives. On the likely chance (unless you're a pro) that you don't set the glass in the bezel just right, highly sticky adhesive is going to make repositioning much harder and you may very well break the new glass trying to reposition.
I highly recommend not using any adhesive at all to hold the LCD to the digitizer for the reasons I've already mentioned. You'll really wish you hadn't.
Click to expand...
Click to collapse
That's what I was thinking. My LCD was slightly cracked on the edge, but not noticeable. With the 2 sided Scotch tape ($5 here) if it breaks again I can replace it without totally busting the LCD. And if it's sitting in a decent case the screen is going to be reinforced anyway.
Nightpath said:
That's what I was thinking. My LCD was slightly cracked on the edge, but not noticeable. With the 2 sided Scotch tape ($5 here) if it breaks again I can replace it without totally busting the LCD. And if it's sitting in a decent case the screen is going to be reinforced anyway.
Click to expand...
Click to collapse
I'm not sure going without the foam is the right thing in all instances. I'm working on a Casio G'Zone Commando, replacing the digitizer, and noticed that the digitizer will only work accurately if it is elevated slightly more than if it just sits on the frame where the foam tape was at. I can't tell if the digitizer is just wonky or if the slight elevation caused by the foam tape is needed with this phone.
Hi, I just replaced the back for a new one (fully assembled). The problem is that dust enters the main camera (just the main camera, not the wide angle camera). I guess it's a bad assembly of the rear glass.. It's not sealed.
My question is what to do with it? I guess I can put glue on the outside to seal it but it will look ugly. It will work, but will look ugly. I think the dust enters from the side on the flash/laser module.
Any recommendations?
Sounds like a bad assembly, yes.
What I would do if I were you is to open the phone up (ifixit has a nice, comprehensive guide to teardown), clean the camera and the glass that covers it on the inside, and either glue it or use some 2mm 3M double sided tape around the edges of the glass inside. You could even leave the back paper covering the double-sided tape (making it well.. single sided). Glue may be too "permanent" a solution.
Get yourself an air duster (compressed air in a can), some 2mm 3M double-sided tape (I like that one the best and it's cheap), a set of precision screwdrivers and a plastic prying tool (if you don't wanna buy one, improvise with anything that can do the trick, so long as it's plastic. Metal can break parts very easily).
Most covers offer insufficient backcamera protection,
And book cases are too sturdy.. Not fun to hold in hand.
So i recommend making a DIY hybrid of the original honor 10 case and an adjusted Flip Case.
This has the added advantage of offering extra protection for the screen/front camera as well, even if you already use a tempered glass.
-Order cheap flip case from Aliexpress
-Cut out the hard plastic case and throw away
-Turn around flip cover and cut a new hole in it for the back camera
-Cut off the flip cover 8mm beneath camera, and throw away
-use quickglue to glue the original Honor transparent case in it.
-Reinforce the cut camera hole with glue.
You may want to cut out the magnet as well as this might interfere with compass or other functions in the phone.
I've had my new S21 for a few hours now, and I keep finding more and more strips of the protective plastic that needs to be peeled off . Does anyone make a special light which make this plastic fluoresce? Could be a great new product!
LOL, I agree.
If I recall correctly, think I found the two big obvious sheets covering the back plastic and the screen glass. Another smaller sheet covering the camera bump and lenses. Then two (three?) very skinny separate strips wrap the circumference of the phone (the metal frame). One starts just to the right of the bottom speaker grill and runs up to the power/volume buttons. Another strip from but button around the top of the phone. And a third strip from the left of the SIM card and up the left-hand side frame. The strips along the circumference are hard to see or feel, and you need to find the start/end of the strip in order to begin peeling it off. I used my fingernail to find each end-point, then picked at the end until it came free enough so I could grab and pull up the entire strip.
I hope I found them all as I've put the phone into a Samsung leather case, which fits so snugly I can barely get it back out.
Leave it be and case it.
Without a case it only a matter of time until it self destructs.
As the protective film works its way loose remove so grit that gets trap under it doesn't mar the phone's finish. Otherwise it helps to protect from case marring.
Leave the display factory protector on as long as possible until it degrades.