Hi gentlemen
How can I root this pocophone?
I've tried everything, this one keeps popping up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know Chinese how to get through it? I realized that the device is locked. I bought my phone on banggood, legally.
I have never done this before
uduro said:
Hi gentlemen
How can I root this pocophone?
I've tried everything, this one keeps popping up
I don't know Chinese how to get through it? I realized that the device is locked. I bought my phone on banggood, legally.
I have never done this before
Click to expand...
Click to collapse
Check the Unlock Bootloader Guide at my POCO F1 Ultimate Collection & Guides thread.
Retrial said:
Check the Unlock Bootloader Guide at my POCO F1 Ultimate Collection & Guides thread.
Click to expand...
Click to collapse
1. Create a Mi account on Xiaomi’s website.
2. Add a phone number to your Mi account.
3. Insert a SIM into your phone (If you haven't added already).
4. Enable developer options in Settings > About Phone by repeatedly tapping (7 times) on MIUI Version.
5. Link the device to your Mi account in Settings > Additional settings > Developer options > Mi Unlock status. Also enable USB Debugging.
6. Download the Mi Unlock app (Windows is required to run the app).
7. Run the Mi Unlock app and follow the instructions provided by the app.
8. Reboot your device into Fastboot mode. For that simply turn off your device, press the Power Button + Volume Down (–) button at the same time. Then connect the device to the Windows PC/laptop via a micro USB cable.
9. After device and Mi account are successfully verified, the Bootloader should be Unlocked and your device will restart by itself.
Click to expand...
Click to collapse
It dont work
uduro said:
It dont workView attachment 5552427
Click to expand...
Click to collapse
Go to settings of MIUI and post screenshot in what version you are.
Is your phone Global version?
Retrial said:
Go to settings of MIUI and post screenshot in what version you are.
Is your phone Global version?
Click to expand...
Click to collapse
uduro said:
Click to expand...
Click to collapse
Are u sure you downloaded the Mi Unlock App from the official website?
You did all the steps in my guide? Read also the AMD Ryzen/Intel Fastboot Fix guide and do these steps too.
Retrial said:
Are u sure you downloaded the Mi Unlock App from the official website?
You did all the steps in my guide?
Click to expand...
Click to collapse
yes, thanks for fast responde
uduro said:
yes, thanks for fast responde
Click to expand...
Click to collapse
Check the AMD Ryzen/Intel Fastboot Fix guide also.
Maybe ur device doesn't recognized in fastboot mode from your PC.
Retrial said:
Check the AMD Ryzen/Intel Fastboot Fix guide also.
Maybe ur device doesn't recognized in fastboot mode from your PC.
Click to expand...
Click to collapse
ok, i check this again. I install drivers, PC recognized my device. 99% and error.
uduro said:
ok, i check this again. I install drivers, PC recognized my device.
Click to expand...
Click to collapse
If you can translate the chinese letters to understand what the app saying.
If you signed in in your mi account recently you may need to w8 2-3 days before unlock.
@uduro check also this video. Seems this guy have similar issue with you.
Retrial said:
If you can translate the chinese letters to understand what the app saying.
If you signed in in your mi account recently you may need to w8 2-3 days before unlock.
@uduro check also this video. Seems this guy have similar issue with you.
Click to expand...
Click to collapse
I saw this video, unfortunately the software he uses today is not working. No tabs to unlock this root. I have tried 4 versions of this program on different videos. Nothing helped.
After e-mail verification, this appears, my phone is still on FASTBOOT
uduro said:
I saw this video, unfortunately the software he uses today is not working. No tabs to unlock this root. I have tried 4 versions of this program on different videos. Nothing helped.
After e-mail verification, this appears, my phone is still on FASTBOOT
View attachment 5552487
View attachment 5552489
Click to expand...
Click to collapse
Close everything, restart your PC and your Phone. Open the App and try again.
Retrial said:
Close everything, restart your PC and your Phone. Open the App and try again.
Click to expand...
Click to collapse
i make what u say. This soft dont work.
uduro said:
i make what u say. This soft dont work.View attachment 5552505
View attachment 5552507
Click to expand...
Click to collapse
This is for sign-in? Choose one of these and login probably email. Oh I don't know. The Mi Unlock App is the only app to unlock the bootloader. I don't know why it doesn't work for you.
Retrial said:
This is for sign-in? Choose one of these and login probably email. Oh I don't know. The Mi Unlock App is the only app to unlock the bootloader. I don't know why it doesn't work for you.
Click to expand...
Click to collapse
uduro said:
Click to expand...
Click to collapse
These chinese letters did you translated them in Google Translate?
Retrial said:
These chinese letters did you translated them in Google Translate?
Click to expand...
Click to collapse
uduro said:
Click to expand...
Click to collapse
From where you bought the phone? It was used?
Seems the device is locked on different account.
Retrial said:
From where you bought the phone? It was used?
Seems the device is locked on different account.
Click to expand...
Click to collapse
Thanks man, i have dual sim XD
WE MAKE IT!!!
i give u few like
uduro said:
Thanks man, i have dual sim XD
View attachment 5552519
WE MAKE IT!!!
i give u few like
Click to expand...
Click to collapse
Oh you had 2 Sims. I didn't thought about it.
I will add this note on my guide.
I am glad you finally made it
Related
Hi, together.
I have a snopow m8 ( it's a device with mtk6589 ). I've tried to port Star N9500's rom ( miui v5 4.5.9 ). It's all ok, unless a little problem. In this device there are three buttons: SOS, PTT and Torch. Now, the device not detected these buttons. I replaced the usr folder but nothing. Thanks a lot. I entrust to you.
PS: sorry for my english.
Hi
What recovery tool did you use to backup your stock ROM and install new one? CWM? Can you please upload file?
What tutorial have you followed to adapt MIUI?
I want to experiment with this phone too. I have 20140405 ROM and it has TONS of issues - from broken OTA updated, crappy GPS EPO servers, not working YouTube, NFC doing kernel stack errors to frequent self restarts. I saw that 20140624 is available on www*needrom*com/mobile/snopow-m8 but MIUI also looks interesting,
Hi
bbkr said:
Hi
What recovery tool did you use to backup your stock ROM and install new one? CWM? Can you please upload file?
What tutorial have you followed to adapt MIUI?
I want to experiment with this phone too. I have 20140405 ROM and it has TONS of issues - from broken OTA updated, crappy GPS EPO servers, not working YouTube, NFC doing kernel stack errors to frequent self restarts. I saw that 20140624 is available on www*needrom*com/mobile/snopow-m8 but MIUI also looks interesting,
Click to expand...
Click to collapse
I use to backup my stock rom with mtk-tool and install cwm 5.x.x . I install the miui 4.5.9. I' m porting this n9500's rom to snopow m8. It's all ok, but I miss three function button. Tomorrow , maybe, they send me the snopow's stock rom. I uploaded the file soon as soon.
I use this guide: en*miui*com/thread-13383-1-1*html
SoloFirenze said:
I use to backup my stock rom with mtk-tool and install cwm 5.x.x .
Click to expand...
Click to collapse
I have to try MTK Droid tools (windows only... yuck!). I've tried to install CWM using ADB, but this phone cannot reboot into bootloader for some reasons.
SoloFirenze said:
Tomorrow , maybe, they send me the snopow's stock rom.
Click to expand...
Click to collapse
I've linked stock rom in my previous post.
SoloFirenze said:
but I miss three function button.
Click to expand...
Click to collapse
I think you should first debug if: those buttons do not send events OR events are not associated with any action/application. In ADB shell run...
Code:
getevent -lt /dev/input/event0
...and press flashlight button. On stock ROM system reports received event:
Code:
[1405204621.434233] EV_KEY 00fc DOWN
[1405204621.434242] EV_SYN SYN_REPORT 00000000
[1405204621.583587] EV_KEY 00fc UP
[1405204621.583590] EV_SYN SYN_REPORT 00000000
Now if you have the same result in MIUI then pressed key is recognised but system doesn't know what to do with it. In that case simply use tool such as http://forum.xda-developers.com/showthread.php?t=850464 to associate hardware key event with app.
SoloFirenze said:
Hi, together.
I have a snopow m8 ( it's a device with mtk6589 ). I've tried to port Star N9500's rom ( miui v5 4.5.9 ). It's all ok, unless a little problem. In this device there are three buttons: SOS, PTT and Torch. Now, the device not detected these buttons. I replaced the usr folder but nothing. Thanks a lot. I entrust to you.
PS: sorry for my english.
Click to expand...
Click to collapse
Hi, i've got a snopow M8 too. How did you port Star N9500's rom on the snopow? Did solve the google play service problem?
Thanks for help.
ludobillou said:
Did solve the google play service problem?
Click to expand...
Click to collapse
I gave up on YouTube app - no one knows how to get it working...
I removed whole app and I'm watching YT through Opera - works perfectly.
The phone is totally not worth the price. The amount of software bugs - broken OTA, broken NFC, Google apps problems, frequent restarts, NVRAM issues, EPO fails, and so on - is incredible.
BTW: Which ROM version do you have?
I've tried to port the rom MIUI for Star N9500 and my Snopow is totally brick now... When the touch interface installation of MIUI appeared, it ask me too choose my screen drivers. I select all because i didn't knew anyone choose. After a successful installation, i wiped the cache and reboot. Now i don't see anything but many horizontal stripes... And there's no more recovery. help :crying:
I think the solution is to download original rom from SP flash tool but the phone is not recognize by my computer, even with the USB VCOM drivers.
What do you think?
ludobillou said:
I've tried to port the rom MIUI for Star N9500 and my Snopow is totally brick now...
Click to expand...
Click to collapse
Try entering META mode - http://forum.xda-developers.com/showthread.php?t=1943442
Your device should be then visible for USB VCOM.
I'm not expert in unbricking so if you have any questions please ask there. But also please come back here later and share your experience.
bbkr said:
Try entering META mode - http://forum.xda-developers.com/showthread.php?t=1943442
Your device should be then visible for USB VCOM.
I'm not expert in unbricking so if you have any questions please ask there. But also please come back here later and share your experience.
Click to expand...
Click to collapse
Thanks for answer. I try the META mode, it work on my HERO h2000+ but not on my Snopow (~50% battery, volume up/down pressed when connect...etc). Does it come from the USB cable or the phone?
Thanks for help.
ludobillou said:
Thanks for answer. I try the META mode, it work on my HERO h2000+ but not on my Snopow.
Click to expand...
Click to collapse
I think this is called "Factory mode" on Snopow.
Turn off the phone. Unplug USB cable.
Press and hold volume down.
Press and hold power.
Do NOT release both buttons until Factory Mode appears. Its bunch of chinese letters, should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect USB cable. Check if VCOM driver detects device.
Yes but...
bbkr said:
I think this is called "Factory mode" on Snopow.
Turn off the phone. Unplug USB cable.
Press and hold volume down.
Press and hold power.
Do NOT release both buttons until Factory Mode appears. Its bunch of chinese letters, should look like this:
Connect USB cable. Check if VCOM driver detects device.
Click to expand...
Click to collapse
The Factory mode worked before i brick it but not now. I will try with OTG cable and i'll tell you what will happen.
Sorry for the delay. I've installed the miui 4.7.5 and all work, unless the three hard button. I'm going crazy!! Can someone help me? I don't know how to do this!! Help me!! please! I will upload the rom.
SoloFirenze said:
Sorry for the delay. I've installed the miui 4.7.5 and all work, unless the three hard button. I'm going crazy!! Can someone help me? I don't know how to do this!! Help me!! please! I will upload the rom.
Click to expand...
Click to collapse
Check my post above. I've written you how to debug it.
bbkr said:
Check my post above. I've written you how to debug it.
Click to expand...
Click to collapse
Sorry I didn't see this. How to do this?
SoloFirenze said:
Sorry I didn't see this. How to do this?
Click to expand...
Click to collapse
Well, reading my previous post about tracking events using ADB and following those instructions seems reasonable
You have to diagnose issue first to figure out how to fix it.
bbkr said:
Well, reading my previous post about tracking events using ADB and following those instructions seems reasonable
You have to diagnose issue first to figure out how to fix it.
Click to expand...
Click to collapse
this is "my" result. The hard keys not working.
www*mediafire*com/download/dxn0db63b2mcnud/miui_4*7*5*zip
SoloFirenze said:
this is "my" result. The hard keys not working.
www*mediafire*com/download/dxn0db63b2mcnud/miui_4*7*5*zip
Click to expand...
Click to collapse
And what is the result of events debugging?
my result is this:
adb shell -- getvent -lt /dev/input/event0
/system/bin/sh: /system/bin/sh: --: unknown option
SoloFirenze said:
my result is this:
adb shell -- getvent -lt /dev/input/event0
/system/bin/sh: /system/bin/sh: --: unknown option
Click to expand...
Click to collapse
Run "adb shell" first, wait for prompt.
And then "getvent -lt /dev/input/event0".
And press some phone buttons.
bbkr said:
Run "adb shell" first, wait for prompt.
And then "getvent -lt /dev/input/event0".
And press some phone buttons.
Click to expand...
Click to collapse
yes I've the same result. Now? Witch app I use for to do this?
Hello Everyone,
I pray all had a wonderful weekend. I am a frequent visitor to this site and love all the advice and work many of you do. Thanks for all the support this far!
I searched through the forum to see if I could find some similar issues but was unsuccessful at finding it. I currently have the LG V10 (LG-H901) by T-Mobile running 5.1.1. I was able to successfully unlock the bootloader via fastboot. I came across the issue when I tried to install TWRP-2.8.7.1-h901.img. It would go through fine on CMD but just would not go through on the phone. The fastboot menu would boot up strangely (After unlocking the bootloader) with the text all pixelated in a way. You are unable to read the words. The phone works fine. It happened to me on two phones so it must be something that I am doing incorrectly but just can't find it on Google or this forum. I apologize if I messed and and hate to start a new thread if its here but no such luck finding it. Anyone experience this before or might have some advice? Thanks!
latinpride613 said:
Hello Everyone,
I pray all had a wonderful weekend. I am a frequent visitor to this site and love all the advice and work many of you do. Thanks for all the support this far!
I searched through the forum to see if I could find some similar issues but was unsuccessful at finding it. I currently have the LG V10 (LG-H901) by T-Mobile running 5.1.1. I was able to successfully unlock the bootloader via fastboot. I came across the issue when I tried to install TWRP-2.8.7.1-h901.img. It would go through fine on CMD but just would not go through on the phone. The fastboot menu would boot up strangely (After unlocking the bootloader) with the text all pixelated in a way. You are unable to read the words. The phone works fine. It happened to me on two phones so it must be something that I am doing incorrectly but just can't find it on Google or this forum. I apologize if I messed and and hate to start a new thread if its here but no such luck finding it. Anyone experience this before or might have some advice? Thanks!
Click to expand...
Click to collapse
If it happened on two phones. Then it's likely a step you are overlooking. The biggest thing you need to consider when working on a new device is making sure you have ALL prerequisites before flashing, fastbooting, adb, etc.
- Make sure you have LG usb drivers installed, then reboot your PC.
- Install ADB system-wide
- Turn on OEM unlock in your Dev-settings
- Make sure USB debugging in ticked AND you allow always for the connected PC.
Then start here: http://forum.xda-developers.com/tmobile-lg-v10/general/guide-how-to-root-lg-v10-easy-t3274699
Read Read Read Read and Read.
I will give this another try when I get home from work. I am pretty sure I did all that was said but like you stated seems I missed a step somewhere. By going through the steps here over again, even though I went through I might have gone through them already, would that cause any damage? If not I will just go through step one all over again. I did not get the instructions from here so I want to start from the very beginning with the link you posted. Thanks!
latinpride613 said:
I will give this another try when I get home from work. I am pretty sure I did all that was said but like you stated seems I missed a step somewhere. By going through the steps here over again, even though I went through I might have gone through them already, would that cause any damage? If not I will just go through step one all over again. I did not get the instructions from here so I want to start from the very beginning with the link you posted. Thanks!
Click to expand...
Click to collapse
@latinpride613
Did u try my KlicKiT tool.... http://forum.xda-developers.com/showthread.php?p=64598329 as long as u have LG v10 driver installed ... See if that work for you.... Check post #3 for instruction how to install.... But basically just one click the tool do the rest for you to unlock BL and install twrp
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That is awesome. I'll give that a shot as soon as I get home. Thank you!
latinpride613 said:
That is awesome. I'll give that a shot as soon as I get home. Thank you!
Click to expand...
Click to collapse
Make sure you did not forget , or it got reset, go into developer settings and enable Oem Unlock, I know 2 people that kept missing this step for a week.
Watcher64 said:
Make sure you did not forget , or it got reset, go into developer settings and enable Oem Unlock, I know 2 people that kept missing this step for a week.
Click to expand...
Click to collapse
Thanks! I've made sure that's been on from the get go. Forgot I had class today so I am waiting to fly outa here to try this out. I will be sure to update this thread with my results. Any other advice is in the mean while is always welcome.
I first checked if all things above were checked off in the Dev options. They both were the Enable OEM unlock and USB Debugging. I then went in and tried the one click. It booted into fastboot fine but when it gets to the point where its suppose install TWRP the phone itself does nothing. CMD executes fine. The phone just stays where the screen tells you some of the fastboot instructions. From some other sites and videos online it suppose to install TWRP and you can boot right into it.
When you restart the phone you get the message that the bootloader is unlocked on the top left corner. I can't get to the recovery to see if it was even installed. Doesn't seem like it was.
This last step is killing me as I know once I get through this I am rooted. I can try doing it step by step again but feel like I will get the same results. Worth a shot anyways.
When I do "adb reboot recovery" I get a dead android with a red exclamation mark.
latinpride613 said:
I first checked if all things above were checked off in the Dev options. They both were the Enable OEM unlock and USB Debugging. I then went in and tried the one click. It booted into fastboot fine but when it gets to the point where its suppose install TWRP the phone itself does nothing. CMD executes fine. The phone just stays where the screen tells you some of the fastboot instructions. From some other sites and videos online it suppose to install TWRP and you can boot right into it.
When you restart the phone you get the message that the bootloader is unlocked on the top left corner. I can't get to the recovery to see if it was even installed. Doesn't seem like it was.
This last step is killing me as I know once I get through this I am rooted. I can try doing it step by step again but feel like I will get the same results. Worth a shot anyways.
When I do "adb reboot recovery" I get a dead android with a red exclamation mark.
Click to expand...
Click to collapse
@latinpride613
Ok try this.....see if this work for you
1. From extracted KlicKiT folder that where ever you saved let say dektop hold shift then right click.... Open cmd command here.
2. Type these three commands in order one by one then enter.
Hope that work for you...[emoji2] let me know ... And seem like twrp didn't install correctly when you try KlicKiT tool.
ted77usa said:
@latinpride613
Ok try this.....see if this work for you
1. From extracted KlicKiT folder that where ever you saved let say dektop hold shift then right click.... Open cmd command here.
2. Type these three commands in order one by one then enter.
Hope that work for you...[emoji2] let me know ... And seem like twrp didn't install correctly when you try KlicKiT tool.
Click to expand...
Click to collapse
This worked!!! Oh man!!! Thank you, so much!! Everyone, I thank you for reading my post and giving me advice. You all are great!
latinpride613 said:
This worked!!! Oh man!!! Thank you, so much!! Everyone, I thank you for reading my post and giving me advice. You all are great!
Click to expand...
Click to collapse
Im glad that work for you Sir.... That's all XDA about.... Giving back and help others members....[emoji106]
You guys are amazing and Ted, I thank you again (As I don't have access to the "Thank you" button quite yet). Already installed my first ROM on my LG V10.
ted77usa said:
@latinpride613
Did u try my KlicKiT tool.... http://forum.xda-developers.com/showthread.php?p=64598329 as long as u have LG v10 driver installed ... See if that work for you.... Check post #3 for instruction how to install.... But basically just one click the tool do the rest for you to unlock BL and install twrp
Click to expand...
Click to collapse
your tool worked for me, thanks.
What Rom is that
latinpride613 said:
This worked!!! Oh man!!! Thank you, so much!! Everyone, I thank you for reading my post and giving me advice. You all are great!
Click to expand...
Click to collapse
Wht Rom Are U Using
Hi All,
Last week, my phone suddenly dead when I woke up in the morning. It stuck at Mi logo and only can access to Fastboot mode.
I have searched many threads and none of them helps.
I tried to use Mi flash but it said "error FAILED (remote: Partition flashing is not allowed)", I knew this is related the bootloader issue.
Then, I tried to unlock the bootloader but Mi Unlock said "couldn't unlock please add your account in miui" settings" after verify the phone.
The problem is I cannot turn on the device properly, how can i access the settings in the phone.
I don't mind to wipe all data but want to get the phone works as a spare device for me.
Any help would be much appreciated. Thanks in advance.:highfive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Routemaster said:
Hi All,
Last week, my phone suddenly dead when I woke up in the morning. It stuck at Mi logo and only can access to Fastboot mode.
I have searched many threads and none of them helps.
I tried to use Mi flash but it said "error FAILED (remote: Partition flashing is not allowed)", I knew this is related the bootloader issue.
Then, I tried to unlock the bootloader but Mi Unlock said "couldn't unlock please add your account in miui" settings" after verify the phone.
The problem is I cannot turn on the device properly, how can i access the settings in the phone.
I don't mind to wipe all data but want to get the phone works as a spare device for me.
Any help would be much appreciated. Thanks in advance.:highfive:
Click to expand...
Click to collapse
EDL mode is the only way out of your trouble.
were you on MIUI rom? then try loading MIUI recovery and reset everything.
Geekn0ob said:
were you on MIUI rom? then try loading MIUI recovery and reset everything.
Click to expand...
Click to collapse
Original miui rom and cannot reach to recovery..no response when I tried to get in.
drnightshadow said:
EDL mode is the only way out of your trouble.
Click to expand...
Click to collapse
I used the EDL mode and flash successfully, but it still stuck on the Mi logo when I reboot the device..ah,....
Routemaster said:
Original miui rom and cannot reach to recovery..no response when I tried to get in.
Click to expand...
Click to collapse
If you are in original MIUI rom and if your bootloader is locked there is no reason your rom would be broken like the way you are describing. however even your EDL mode flashing didn't work so I think there might be hardware problem in your device...
Routemaster said:
I used the EDL mode and flash successfully, but it still stuck on the Mi logo when I reboot the device..ah,....
Click to expand...
Click to collapse
U choice the option clean all or save user data down right? When u save user data, then this the problem
Sent from my Mi Note 10 using XDA Labs
joke19 said:
U choice the option clean all or save user data down right? When u save user data, then this the problem
Sent from my Mi Note 10 using XDA Labs
Click to expand...
Click to collapse
clean all
Got exactly the same problem.
same problem stuck in mi, flash with test point, success and still stuck
please help, i have no money to buy new phone
thank you
flash with beta because with latest always error
use latest rom
thank you
drnightshadow said:
EDL mode is the only way out of your trouble.
Click to expand...
Click to collapse
if u don't mind can u plz describe the process
shops seem to be able to flash on a locked bootloader like this
but when we try it we can't what seems to be the problem?
BabaLiong said:
View attachment 5166353
same problem stuck in mi, flash with test point, success and still stuck
please help, i have no money to buy new phone
thank you
flash with beta because with latest always error
use latest rom
thank you
Click to expand...
Click to collapse
hey what was the solution i m in same stage as u were
amrittech said:
hey what was the solution i m in same stage as u were
Click to expand...
Click to collapse
nothing the phone die... imho emmc need to replace.. but if you replace the phone wont live along will die soon.. as far i read
Hi, Same happened with my redmi note 5. It stuck at mi logo screen and I can only go into the fastboot mode. The main issue is the device is locked and I don't have any mi account on this device. When I tried to flash it with this image whyred_global_images_V12.0.2.0.PEIMIXM_20201224.0000.00_9.0_global_561698251e.tgz, the MiFlashTool gives error that device is locked. Please help
drnightshadow said:
EDL mode is the only way out of your trouble.
Click to expand...
Click to collapse
When I try to access EDL mode every time, my PC says.
The last USB device you connected to this computer malfunctioned. and windows does not recognize it.
Ank0001 said:
When I try to access EDL mode every time, my PC says.
The last USB device you connected to this computer malfunctioned. and windows does not recognize it.
Click to expand...
Click to collapse
Try on another PC.. USB on your PC has trouble with drivers or fix the PC (guess windows, try clean reinstall)
I got the Motorola update to android 11 and successfully installed it. When I tried to install magisk after patching my boot.img, I think I've hard bricked the phone.
I'm unable to turn on the screen.. tried just the power button, vol- and power, vol+ and power.. no dice.
anyone know of other things I can try to get in to fastboot and reset the device? or is it a lost cause?
I flashed the patched boot.img from fastboot. when the phone screen was stuck at the motorola logo. I went back to fastboot and flashed the stock boot.img. It boot looped a couple of time and now it won't turn on at all.
Using the rescue tool is of no help because the tool requires the device to boot into fastboot
Help!
Try this. Hopefully you can get to the bootloader. If yes, continue with my suggestion below.
I guess you go up to android 11 via OTA. In this case, you need to download the android 11 firmware matching your phone, then extract the boot.img which you will flash back to your device. Hopefully, you can reboot to your phone as normal.
When patching the boot.img using the latest magisk, remember not to change the patched file name given by magisk. Just keep it as is as provided by magisk. To be safe, you should test a single boot with the patched image before flashing it.
Hope that'll help.
tinbilly said:
Try this. Hopefully you can get to the bootloader. If yes, continue with my suggestion below.
I guess you go up to android 11 via OTA. In this case, you need to download the android 11 firmware matching your phone, then extract the boot.img which you will flash back to your device. Hopefully, you can reboot to your phone as normal.
When patching the boot.img using the latest magisk, remember not to change the patched file name given by magisk. Just keep it as is as provided by magisk. To be safe, you should test a single boot with the patched image before flashing it.
Hope that'll help.
Click to expand...
Click to collapse
Thanks.. I cannot get the phone to power on at all.. so, no bootloader/fastboot. Tried power cycle while plugged in.. didn't change anything. Will keep trying.. Strangely, the rescue software's 3rd option is "power-off mode", but that option also asks me to be in fastboot.
smvsmv said:
Thanks.. I cannot get the phone to power on at all.. so, no bootloader/fastboot. Tried power cycle while plugged in.. didn't change anything. Will keep trying.. Strangely, the rescue software's 3rd option is "power-off mode", but that option also asks me to be in fastboot.
Click to expand...
Click to collapse
is it listed in Device manager like this?
Is my device in EDL Mode?
sd_shadow said:
is it listed in Device manager like this?
Is my device in EDL Mode?
Click to expand...
Click to collapse
No. I tried reinstalling the Qualcomm usb drivers. That didn't help either. Possibly that's why the rescue tool is unable to help with the power off option. Any other ideas? What ever happened, it has to do with the boot.img.
I wish phones had a reset hardware button.
Are you sure the phone is fully charged? Did you try plugging in the power for several hours?
Did your try https://support.lenovo.com/vn/en/downloads/ds101291-rescue-and-smart-assistant-lmsa?
tinbilly said:
Did your try https://support.lenovo.com/vn/en/downloads/ds101291-rescue-and-smart-assistant-lmsa?
Click to expand...
Click to collapse
Yes, that's the rescue tool that I've been referencing. Also, the phone had full charge when I screwed it up. Will try plugging it again.
smvsmv said:
No. I tried reinstalling the Qualcomm usb drivers. That didn't help either. Possibly that's why the rescue tool is unable to help with the power off option. Any other ideas? What ever happened, it has to do with the boot.img.
I wish phones had a reset hardware button.
Click to expand...
Click to collapse
How is it listed in Device Manager?
sd_shadow said:
How is it listed in Device Manager?
Click to expand...
Click to collapse
It's not at all listed.. there are no "other devices" and it's not listed under ports either
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
smvsmv said:
It's not at all listed.. there are no "other devices" and it's not listed under ports either
View attachment 5311913
Click to expand...
Click to collapse
If windows is making the device connected sound will connecting to USB, it's there somewhere.
Otherwise, it's not fixable because there is no device to send commands to.
sd_shadow said:
If windows is making the device connected sound will connecting to USB, it's there somewhere.
Otherwise, it's not fixable because there is no device to send commands to.
Click to expand...
Click to collapse
Yep.. that's what I'm afraid it is. Unless the device decides to boot to something, I'm guessing it's done. Thanks for your help!
Did you try Motorola Moto G 3rd Generation Troubleshooting or Moto G Power: Black Screen or Screen Won't Turn On? 6 Easy Fixes!?
tinbilly said:
Did you try Motorola Moto G 3rd Generation Troubleshooting or Moto G Power: Black Screen or Screen Won't Turn On? 6 Easy Fixes!?
Click to expand...
Click to collapse
yeah.. been googling and this was the first video that I came across. didn't help though.
EDIT - ignore the below. Just remembered that is a snapdragon and not Mediatek.
When I leave the phone connected to my windows 10 laptop, the device shows up occasionally under networks. Double clicking the device pulls up the properties.
Looks like there's still some "life" on my phone. Anyone have ideas on how to get into it?
smvsmv said:
EDIT - ignore the below. Just remembered that is a snapdragon and not Mediatek.
When I leave the phone connected to my windows 10 laptop, the device shows up occasionally under networks. Double clicking the device pulls up the properties.
Looks like there's still some "life" on my phone. Anyone have ideas on how to get into it?
View attachment 5314927
Click to expand...
Click to collapse
do you what Model # you have?
sd_shadow said:
do you what Model # you have?
Click to expand...
Click to collapse
Not sure.. but before upgrade, the rescue tool downloaded the file SOFIA_RETAIL_QPMS30.80_63_6_8_5_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml Not sure if that shows model
smvsmv said:
Not sure.. but before upgrade, the rescue tool downloaded the file SOFIA_RETAIL_QPMS30.80_63_6_8_5_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml Not sure if that shows model
Click to expand...
Click to collapse
open that folder, does it have a
preloader.bin file?
sd_shadow said:
open that folder, does it have a
preloader.bin file?
Click to expand...
Click to collapse
No. these are only 4 bin files
The info file has the below. Couldn't find anything that status with a XT
BUILD REQUEST INFO:
SW Version: sofia_retail-user 10 QPMS30.80-63-6-8-5 a1e5d release-keysM6125_39.36.03.39R
Modem Version: M6125_39.36.03.39R
FSG Version: FSG-6125-03.87
MBM Version: MBM-3.0-sofia_retail-37f1d8316-201231
Build Fingerprint: motorola/sofia_retail/sofia:10/QPMS30.80-63-6-8-5/a1e5d:user/release-keys
My mom got a replacement A14 5G due to the A20 not booting, and I am gonna use the A20 as one of my phones.
It's stuck on the logo screen (the screen before it boots) and I am trying to get it on.
It doesn't connect to my laptop, either. So I can't flash any firmware.
I tried factory resetting and clearing cache, it also does not boot.
I tried restarting and it said at the top in red text: "Could not do normal boot." and some string of letters after and "Error" then force shut off.
Is there any way to get around this?
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Creepergames360 said:
My mom got a replacement A14 5G due to the A20 not booting, and I am gonna use the A20 as one of my phones.
It's stuck on the logo screen (the screen before it boots) and I am trying to get it on.
It doesn't connect to my laptop, either. So I can't flash any firmware.
I tried factory resetting and clearing cache, it also does not boot.
I tried restarting and it said at the top in red text: "Could not do normal boot." and some string of letters after and "Error" then force shut off.
Is there any way to get around this?
Thanks in advance.View attachment 5940493
Click to expand...
Click to collapse
Cannot boot to Odin?
With my SM-A202F I need to hold + and - Volume and plug in USB cable for Download Mode...
You tried this?
To enter Download Mode aka Odin Mode?
Best Regards
adfree said:
With my SM-A202F I need to hold + and - Volume and plug in USB cable for Download Mode...
You tried this?
To enter Download Mode aka Odin Mode?
Best Regards
Click to expand...
Click to collapse
He needs to find the right firmware. Since his is a U model,probably is Carrier locked. He needs to determine his carrier to find right carrier.
webhook said:
Cannot boot to Odin?
Click to expand...
Click to collapse
No.
webhook said:
He needs to find the right firmware. Since his is a U model,probably is Carrier locked. He needs to determine his carrier to find right carrier.
Click to expand...
Click to collapse
I am on MetroPCS.
If he can manage to see Download Mode screen...
This include usefull infos...
Btw.
Maybe I can make eToken aka steady.bin for this Model... depend on Bootloader Version...
Best Regards
Only to be sure...
If you do this like on Video visible... then your Phone explode?
Cooking? Or swimming?
Or enters Download Mode?
Best Regards
adfree said:
If he can manage to see Download Mode screen...
This include usefull infos...
Btw.
Maybe I can make eToken aka steady.bin for this Model... depend on Bootloader Version...
Best Regards
Click to expand...
Click to collapse
So, it connected.
adfree said:
Only to be sure...
If you do this like on Video visible... then your Phone explode?
Cooking? Or swimming?
Or enters Download Mode?
Best Regards
Click to expand...
Click to collapse
Yeah it entered download mode.
Samsung Galaxy A20 Firmware Download SM-A205U Free Download
Samsung Galaxy A20 Firmware Download SM-A205U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
TMK
If I can see correct.
With eToken seems i can not help... As you are on BL 13... as it seems...
Sorry I have only old Cert...
FRP seems on...
Best Regards
adfree said:
Samsung Galaxy A20 Firmware Download SM-A205U Free Download
Samsung Galaxy A20 Firmware Download SM-A205U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
TMK
If I can see correct.
With eToken seems i can not help... As you are on BL 13... as it seems...
Sorry I have only old Cert...
FRP seems on...
Best Regards
Click to expand...
Click to collapse
Maybe you can flash XAA or unbranded software for unlocked model. Not too sure if it works though.
FRP...
If D is 13...
Then only 1 firmware... Because you can't downgrade...
A205USQSDBWC2
My suggestion try TMK... last ehm latest and look what happens...
Good Luck.
Best Regards
http://fota-cloud-dn.ospserver.net/firmware/TMK/SM-A205U/version.xml
BWC2 seems last...
Notify Update
So in theory your device have seen this Firmware allready...
Anyway. To flash this Firmware again to look if this boot proper... before next...
Best Regards
Creepergames360 said:
Yeah it entered download mode.
Click to expand...
Click to collapse
adfree said:
http://fota-cloud-dn.ospserver.net/firmware/TMK/SM-A205U/version.xml
BWC2 seems last...
Notify Update
So in theory your device have seen this Firmware allready...
Anyway. To flash this Firmware again to look if this boot proper... before next...
Best Regards
Click to expand...
Click to collapse
I tried flashing a combination firmware and it says "Please get the approval to use factory binaries" and a string of letters that say "PIT".
Strange.
I was sure my suggestion was to flash Stock Firmware for TMK...
No idea if you find your answer here:
[THEAD ARCHIVED]
UPDATE: I am marking this thread as archived as the original purpose of it was fulfilled.
forum.xda-developers.com
Best Regards
adfree said:
Strange.
I was sure my suggestion was to flash Stock Firmware for TMK...
No idea if you find your answer here:
[THEAD ARCHIVED]
UPDATE: I am marking this thread as archived as the original purpose of it was fulfilled.
forum.xda-developers.com
Best Regards
Click to expand...
Click to collapse
It seems to be flashing!
adfree said:
Strange.
I was sure my suggestion was to flash Stock Firmware for TMK...
No idea if you find your answer here:
[THEAD ARCHIVED]
UPDATE: I am marking this thread as archived as the original purpose of it was fulfilled.
forum.xda-developers.com
Best Regards
Click to expand...
Click to collapse
So it froze on the USERDATA screen and now it doesn't boot. It also doesn't flash anymore. And it gives an error every time I start it up.
Creepergames360 said:
So it froze on the USERDATA screen and now it doesn't boot. It also doesn't flash anymore. And it gives an error every time I start it up. View attachment 5940555
Click to expand...
Click to collapse
What error?
webhook said:
What error?
Click to expand...
Click to collapse
SOFTWARE UPDATE FAILED
"Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update."
Creepergames360 said:
SOFTWARE UPDATE FAILED
"Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update."
Click to expand...
Click to collapse
You can try this: https://www.verizon.com/support/knowledge-base-80201/
Or flash the unbranded software (Find your model number and XAA unbranded software.)