Related
A surprise came in the mail today from AT&T. I had pre-ordered the fit back in March and it has finally arrived, and even earlier than the expected launch date.
Unboxing:
First impressions:
The gear fit is very light, and comfortable to wear. The design is something that I can appreciate more than its big brother the gear 2/Neo. The display is vibrant and the picture quality is what you would expect from a AMOLED display. The heart rate monitor works well, I had it over my wrist bone at first so it couldn't see me vein to get a reading since it uses infrared to count your BPM. I enjoy the simplicity of the design more than some other smart watches/fitness bands because its just a simple layout with one physical button and a touch screen. This is more aimed at the fitness side of things than the everyday smartwatch, but that doesn't mean its not a great device. Don't forget that this product is meant to compete more with items such as the fitbit, jawbone and other fitness trackers but with added functionality. Samsung is also releasing their other fitness product the S Band which is more on par with the two mentioned above, but the fit could be seen as a premium version of these rather than a new category in general. I don't see the fit complete with the Polaris line of products in terms of monitoring because its only meant for Samsung devices currently. Overall I am happy with it, and I will update this with more details, images and answer any questions that you guys have.
Hopefully Samsung will post prices and make the other colored bands available for people to buy on the official launch but these days who knows.
Pictures Part 1:
Day 1
Update 1:
I have been using this device for about 6 hours messing around with the settings and seeing what works for me. The battery was at 63% when I started and is now at 55%. Keep in mind that I have had the screen on a lot, along with trying out the gesture to wake which is a little too sensitive. If you use the gesture wake the display will turn on when you lift your arm up (a battery killer obviously) The notifications do push instantly to the device and you can select any of your apps to push out their notifications to the fit. The pedometer also works well and you can pause it so you are counting steps by moving around at your desk or in your car. The RTOS is very simple and it works much better than the gear 2 in terms of functionality. The band is very comfortable and the clasp is secure enough so you don't have to worry. There is also a feature you can enable where your phone will beep if you walk about 25ish feet away from the fit which works also on the fit in the form a vibration that alerts you. The APK for the Gear Fit Manager fromt he S5 does work (I'm running it on my Note 3 N900A) with 4.4.2 without any problems so far. The heart rate monitor is very fast now that I know what to do. (The screen shows you a reminder of how to do it). A nice feature that I was not aware of until I tried it out was the media control. I can adjust my phones volume, pause/play and change the track from the watch which is convenient when you are working out. It has been pouring down rain here all day and I am glad that the fit is IP67 water resistant or I would have a dead device. So far my impressions are that this is a great device, its light weight, comfortable and most importantly functional. I will add more pictures soon.
Update 2:
Brightness and different situations:
The display can be adjusted from brightnesses of 1 to 6 but since there is not light sensor this must be done manually through the settings either via the app or on the device itself. I will take a picture of it underwater for you to see, but outdoors the 5-6 brightness should be plenty depending on how bright it is outside. I usually leave it at the 3-4 setting and I'm able to read the display just fine. When I'm inside for a while I usually turn it to the 1-3 range depending on the lighting. I only adjust it if I really need to, usually a standard of 3-4 brightness will be sufficient for most people's daily activities.
Also the charging cradle if you call it that snaps on and off with less effort that plugging in a micro usb. As mentioned in the earlier posts I charged it last night 4/7 so I could do an accurate test from a full battery.
Pictures Part 2:
Device display at setting 1 (my desk isn't the brightest place in the world at night, ignore the glare from my lamp):
Battery life after 1 day of use starting from 0700. I had my gmail, sms, calls, and google now notifications being pushed to the device and I used the pedometer for a hour or so to try it out today. Keep in mind with every notification the display turns on. I have it set up so it this way but you can change this to only turn on for only high priority notifications and it also vibrates to alert you for each notification. The battery seems impressive so far as you can see from the picture below. I would classify toda's use as light to moderate because of the numerous notifications that I received and checking my heart rate, coupled with the pedometer. I will be going for a hike, walk, or bike ride tomorrow to test out a longer use of the fitness functionality vs its impact on the battery.
Underwater Display images: (yes that is a blendtec and no I'm not going to blend it like "will it blend") It was a clear container that was easy to get a image of the fit rather than in my sink. The slight blue in the second image was due to my Note 3's camera. The first image is a better depiction of what it looks like. As you can see there is almost no visible distortion which is nice for those of you who choose to use it in the water.
Pictures Part 3
Day 2:
After a second day of use here are some updates. The S Health App will not sync my workouts or pedometer from the fit which is a little annoying. This could be because I am running the leaked S5 apps and there could be an update that I don't have. This should be fixed when the device officially launches this friday. The battery has gone down a bit more it lost about 8-10% while I was sleeping but I did leave it connected via bluetooth to my phone. I also used it to count my steps for my walking between classes to see how far I walk out of curiosity. I also went on a 1-2 mile "hike" on some trails. The battery is at about 65% currently which still is not bad after 2 full days of use. I will keep the updates coming for the battery until it actually dies.
Side note: I have heard that Samsung also added in a sleep monitor option in the update for the gear fit. I hope it shows up soon because I can't find a way to update the device. There is no option in my app as you will see from my pictures down below. I also forgot to charge my phone last night so its almost dead anyway. Kies 3 does not find the device when I briefly plugged it in via usb to my pc. The battery stayed at the same % for those of you who were wondering any charging by checking for software updates was negligible. Below I have provided screen shots of the various menus on the fit and what some controls look like. If you have any requests feel free to let me know and I will post more pictures.
The glare is in the pictures is from my camera, and my oily fingers becuase I didn't wipe it off. until I realized the photos look a little bad. Thats a day of use and dirt...
Pictures Part 4:
Time is for the battery life reference
Volume control
Settings Menu
Here is a screenshot of where the "software update" icon should be. As you can see there is no option to update it in the S5 APK.
Day 3:
The app was offically released via the Samsung App Store. I downloaded it and updated my fit to the new software. Here is a breakdown of the 'new' added features that I have noticed since the pre-official launch software:
New clock faces for landscape and portrait
Sleep tracker
Pin lock
Portrait mode (you have to manually rotate it via the settings menu)
Customize icon location on device (left or right of the home screen clock)
Redesigned app
It is now day 3 and the fit is still clinging to life. The majority of battery life dissipates during the idle time at night. I am currently at 38% battery life after 3 days of moderate use. I have kept my rightness at the 2-3 range unless I am indoors in which case I usually change it to 1 to save power when I don't need it. I keep the pedometer running all day, and the bluetooth on with weather updates on the home screen every 3 hours. I also had to leave it on during its update which took about 3-5 minutes of the display being constantly on. I am going to try to use the sleep mode tonight to see how well it works (and so you can see how little that I sleep...). I enjoy using the portrait mode, it feels more natural even with the narrow display, but it depends on what I am doing. Anyway here are some more pictures
Pictures 5:
Pictures Part 6:
Reading emails/notifications in landscape and portrait modes
App Pictures:
Day 4:
I managed to get another solid day of use out of the fit. It popped up with a battery alert around 1600 yesterday when it was at about 15% battery. The fit managed to last until just a couple of minutes ago. I'm happy with the battery life being just over 4 days for what I use it for (everyones battery life many very based on use). I am also posting picture of the sleep tracker so you can see what it looks like. I enjoy using the portrait mode more than the landscape, it is a little weird to look at because its so narrow, but you get used to it.
Pictures 7:
Before it died
Update 5/11
I know its been a while since I updated the OP. I have been very busy with finals (engineering is always fun) and I'm moving in a few days. I have now been using the fit for over a month and I'm still happy with it. My battery has averaged about 5 days per charge with the longest at 7 days and shortest being 3 days. I have noticed a small update to the app at least twice which is good that Samsung is updating it.
The bad:
The s health app doesn't sync well with the fit which is disappointing. The hiking mode only measures your workout by altitude rather than how other app account for that and distance and factor in how many calories you burn. (Even though no device is truly accurate)
Other than those two complaints I use the fit daily as a watch and if I got on a hike or walk with my wife. I hope that Samsung will release the other bands for it soon. I have had no issues with the band coming off as some other people had stated. If you have this problem there is a simple fix. Take a small black hair rubber band (this kind woman use in their hair) which can be purchased for 2$ for a couple hundred of them and put it on your fits band. This week prevent it from falling off even if it does come undone. I will post a picture of you want. I never use it but it seemed like a good idea to address the issue.
Lastly if anyone has questions I will be happy to answer them the nest that I can. I will begin posting more regularly again one I get settled into my new place in the coming week or two. I still go to school full time in the summer (I want to graduate faster since I'm already old for a Jr) so with that in mind thank you to everyone who found this helpful and thanks me.
P.s. My thoughts are still scattered due to everything going on so I will look over this post when I get home to make sure it makes sense.
do you know if it works with any Android phone, or only with Samsung's smartphones?
fvidania said:
do you know if it works with any Android phone, or only with Samsung's smartphones?
Click to expand...
Click to collapse
Currently it only works with Samsung devices I believe there are 14 of them with compatibility. I'm not certain about this but MAYBE if you root a device and install the APK for the gear fit it COULD work. Has anyone tried this?
I'm very likely to pick one up when they're available in stores.
When did you pre order it?
Sent from my SM-N900T using Tapatalk
flipq88 said:
When did you pre order it?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I know ATT is still taking pre-orders. Talked to them today and they said they'd be selling them in store later this month.
Nice! :good:
Interested how you find the device.
I preordered it on 3/20. I spoke with ATT and they said that stores should be receiving them for the Friday launch but there is not gurrantee . I charged my battery fully last night so I could see how long it would actually last from a full charge under normal use. I will part nighty updates with what I used it for and the battery pwrcentage . There will also be a software update soon according to Sam mobile. You will be able to change the screen orientation, which Iknow was a big complaint for some people. The article can be found here
http://www.sammobile.com/2014/04/08...ption-to-enable-vertical-display-orientation/
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
do you have to always keep the bluetooth on ? i would want to use it as just a watch at times..
Well in order to connect or to the phone bluetooth needs to be on. If it's off it still works as a watch and pedometer just without pushing notifications.
Edit: to answer your question I airways keep the Bluetooth on.
I verified that everything does work (which it should) except data/phone dependent features i.e.: weather,any kind of notifications, SMS, S Health goals, missed calls etc. I hope the update gets pushed out soon, but I have no idea how to check for it. There is no option for updates in the app or on the device, but then again I'm running the S5's extracted apk.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I'm interested in the gear fit too.
I saw that you have a spigen screen protector as well. Can you put some light on its efficiency like colors after being under water, clarity outdoor/indoor,etc. That would be really helpful.
shoaibar said:
I'm interested in the gear fit too.
I saw that you have a spigen screen protector as well. Can you put some light on its efficiency like colors after being under water, clarity outdoor/indoor,etc. That would be really helpful.
Click to expand...
Click to collapse
There is no distortion of any colors due to the screen protector in any of those situations that I can see. Everything seems to be as clear as a device without a screen protector. I'm sure if you look extremely close you could probably find a very very minimal amount of distortion/clarity but I can't see any myself. I am not a fan of the Spigen screen protector because its more inline with the Zagg screen protectors. This means that it has a gloss to it even though it appears matte when you have it in its packaging. The feel of it is similar to the Zagg with a almost rubber like friction at first after you apply it, but it dissipated after I cleaned it with some of my lense cleaner. I have used it in the heavy rain we have been experiencing without any issues of water getting under it or limited visibility. I just threw the device in my sink full of water and the protector looks the same as it does now. There does not appear to be any distortion, or at least no noticeable distortion. It's much harder to tell because of the screen size, but overall I am happy with it. It's definitely no tempered glass protector quality but it does the job for the Gear Fit. This is my first Spigen non-glass screen protector so I'm not sure how their regular ones are compared to this.
Wow. Thank you so much for giving a more in-depth analysis.
I also pre-ordered the Fit via amazon. Wasn't sure which screen protector to buy. Hope would go with Spigen as there is no better choice other than this.
shoaibar said:
Wow. Thank you so much for giving a more in-depth analysis.
I also pre-ordered the Fit via amazon. Wasn't sure which screen protector to buy. Hope would go with Spigen as there is no better choice other than this.
Click to expand...
Click to collapse
Yeah there is just the Spigen and I believe Skinomi? I think that both are about the same material wise so there shouldn't really be a difference.
I can't wait for the update that allows portrait mode. I can confirm that its not shipping with the update mentioned earlier we will see what happens.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I'm probably answering my own questions already but does this gear fit have a calorie intake measure? Is this watch viable for going to the gym purposes?
I don't see any info about the gear fit recording calorie intake and it says heart rate sensor and not monitor which it probably won't constantly read your heart rate as you work out (oppose to the polar fitness watches)
You input your information via the S Health app so yes it can do calories intake and burn but only for 4 different activities at the moment. These include running, walking, hiking and biking. I believe that more will be added such as strength training soon.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I work for Samsung. They should be in every Best Buy friday. They also work with the Pro series tablets and the upcoming Galaxy series 4 tablets if anyone is wondering. ip67 rating essentially is 3 feet of water for up to 30 minutes.
bckrupps said:
I work for Samsung. They should be in every Best Buy friday. They also work with the Pro series tablets and the upcoming Galaxy series 4 tablets if anyone is wondering. ip67 rating essentially is 3 feet of water for up to 30 minutes.
Click to expand...
Click to collapse
What about the colored bands and software update?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Pilz474 said:
What about the colored bands and software update?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
not sure what bands will be in stock yet. there is an update for the gear fit already to allow it to be viewed in both portrait and landscape mode
Interesting ....I'm just concerned about battery drainage from my cell which is the note3 with the bt on all day...
Sent from my SM-N900T using Tapatalk
It's one of those features that I loved as soon as I heard about it in the original Moto X. I thought "that's real, useful, innovation." But the implementation in the 6P is poop. I can't reliably get the thing to work at all. As in, it works with movement, but I can't tell you how to reliably set it off. At all.
One other thing I've noticed is the screen is fully woken up by (I think) any touch on the screen when Active Display is on. Which seems very wasteful.
I'm guessing this is purely software because the sensors in the 6P are more than up to the task. I would also think it would be nice to have a setting to simply use the power button to, in essence, half wake the screen the way Active Display does. Then tapping on the notification will perform as normal.
Sound off if these issues are limited to just me. I actually hope they are.
Seems to work pretty well for me, i wouldn't say 100% but most times i pick up the phone, or take it out of my pocket.. it lights up
Laying down flat, picking up the device shows info.
Laying down flat, a little twist shows info.
Picking it up seems more reliable, but the nudge left or right when flat needs to be a decent "nudge". Otherwise it would be switching on constantly, which would be a waste.
And waking when touching any part of the screen when adisplay is showing is normal behavior.
Maybe when development moves ahead we'll have more control over it's behavior. I can see devs having fun with this feature.
+1 for the OP. I've been using the phone about a full day now and I've seen the active display like maybe 3 times, never when it really made any sense. Bummer.
Owned my phone less than 24hrs, installed a screen protector before using the phone. Ambient display want really working. I took the glass screen protector off, ambient display has come back. I'm wondering if the sensor is that sensitive.
Soulfulgrey said:
It's one of those features that I loved as soon as I heard about it in the original Moto X. I thought "that's real, useful, innovation." But the implementation in the 6P is poop. I can't reliably get the thing to work at all. As in, it works with movement, but I can't tell you how to reliably set it off. At all.
One other thing I've noticed is the screen is fully woken up by (I think) any touch on the screen when Active Display is on. Which seems very wasteful.
I'm guessing this is purely software because the sensors in the 6P are more than up to the task. I would also think it would be nice to have a setting to simply use the power button to, in essence, half wake the screen the way Active Display does. Then tapping on the notification will perform as normal.
Sound off if these issues are limited to just me. I actually hope they are.
Click to expand...
Click to collapse
The touch layer and the actual display are 2 different pieces of hardware, you probably can't limit what portions of the touch layer are active, it's either on or off but that has nothing to do with what pixels are turned on. Hope that helps.
Just turned it on to test. Seems to light up when its supposed to. Turned it back off because I use android wear and don't need it.
My switching from Active Display (Moto X 2013) to Ambient Display (Nexus 6) was tough, but I got used to it. My 6p seems to not work as well or the same as my N6 did.
In the morning if I wake up before my alarm I would grab my N6 to activate the Ambient Display and see the clock, as well as my notifications (I get the weather in the morning) to see if there was anything urgent (text from a coworker, etc).
With my 6p when I pick it up, nothing seems to happen, or at least not as quickly as it did with my N6. N6 would show it on almost any movement, but the 6p requires it to be fully picked up all the way and almost vertical before it shows anything. Not sure if this is gyro or software related. If I pick it up from flat and rotate 90 degrees right (like it would be if it was sitting next to my bed), effectively making it vertical in landscape mode) nothing happens. If I hold it vertical in portrait, it shows me.
Just something to get used to, I guess.
Active display is rubbish on the 6P lol. That's coming from a user BTW, its just not reliable.
I agree with OP. I sat phone beside me and noticed it would light up when I got a new message. Then a few seconds after, without touching or moving it, it would light up again (no new anything happened), then it would light up again. Not sure what's waking it up, but quite annoying. Should absolutely be a software fix though.
johnhazelwood said:
I agree with OP. I sat phone beside me and noticed it would light up when I got a new message. Then a few seconds after, without touching or moving it, it would light up again (no new anything happened), then it would light up again. Not sure what's waking it up, but quite annoying. Should absolutely be a software fix though.
Click to expand...
Click to collapse
This is one thing that is reliable for me! Lol. When a notification comes through, it will activate once, then turn off, then activate again shortly after. I'm not sure if it's mean to do this or not, but at least it's reliable.
I should make it clear though that in my short time with the device, it is a definite top quality phone. The Active Display just seems to be, for me at least, a noticeable deviation from the very high bar set by the rest of the device. I did read other reviewers with issues, but then, how much faith can you put in a 48 hour review. I've had mine for almost a week and still feel like I'm just getting to know it.
sluflyer06 said:
The touch layer and the actual display are 2 different pieces of hardware, you probably can't limit what portions of the touch layer are active, it's either on or off but that has nothing to do with what pixels are turned on. Hope that helps.
Click to expand...
Click to collapse
True-ish. It is indeed possible to have a software solution that ignores certain touch events even though the hardware layer will consistently recognise touch events as long as the touch layer is active. If the Active Display becomes just another UI, then the notification icons/regions become touch targets and the rest of the screen can be written in software to not be touch targets and thus not respond to touch inputs.
I'm not sure what this method would look like in practice. So for example, when the Active Display has been activated, would there be a way to fully activate the screen by a touch method without touching a notification? Maybe a special region at the bottom of the screen? No idea. Just thinking out loud.
Coming from Active Display on the Droid Maxx, Ambient Display is very disappointing and actually leads to my emergency dialer engaging sometimes when the phone is in the pocket of looser pants. But it doesn't display when I would like it to, with just a nudge, like the Motorola implementation.
I've messed around with my dad's phone. He has the Moto X as well. I can literally just wave my hand in front of the screen and it comes on. I thought that was awesome. This phone does seem a bit inconvenient if I just want to quickly get the time or my notifications. Then again that's why I have a (smart)watch. Not sure where I'm going with this.
Good talk....
I've figured it out! Feeling quite pleased with myself.
Based on the responses of others, I tried using it slightly differently. Now, I figured out two instances which regularly and reliably activate the Active Display.
The first is when the phone is flat on a surface, if I pick it up to be perpendicular to the floor, either portrait or landscape seems fine, it will activate. I believe this actually works from almost any starting point as long as the end point is the phone being upright and vertical.
The second is with it again starting flat on the table. Holding it by the bottom of the phone, moving it semi-quickly across the table, only about 5 cm seems needed, and then stopping quickly. This is a strange one which I only found when I bumped it into something on the table. I have a case so was not bothered testing this repeatedly.
I know correct my first statement. The feature is not poop. Well, not total poop. There are other instances that will activate it but I don't know how to do them reproducibly. If that's a word.
Hope this helps someone.
RoyJ said:
I've messed around with my dad's phone. He has the Moto X as well. I can literally just wave my hand in front of the screen and it comes on. I thought that was awesome. This phone does seem a bit inconvenient if I just want to quickly get the time or my notifications. Then again that's why I have a (smart)watch. Not sure where I'm going with this.
Good talk....
Click to expand...
Click to collapse
Thats a pretty nifty idea, if its flat... give it a bit of " These aren't the droids you're looking for" to wake the screen.
Surely cant be that hard to do.........
..... i cant do it
My active display does nothing. Doesn't activate anything even shaking the phone.
Sent from my Nexus 6P using Tapatalk
Stretlow said:
Thats a pretty nifty idea, if its flat... give it a bit of " These aren't the droids you're looking for" to wake the screen.
Surely cant be that hard to do.........
..... i cant do it
Click to expand...
Click to collapse
The Moto X (2014 and after) does it as it has other sensors on the front, the 6P doesn't. However, the Moto X (2013) did it with Kitkat as it used the proximity sensor, which was less reliable but still effective, but this was removed in Lollipop. To be fair, ambient display doesn't work nearly as well as Moto's active display. I bet a dev could activate it via proximity sensor, should people want it enough.
Soulfulgrey said:
I've figured it out! Feeling quite pleased with myself.
Based on the responses of others, I tried using it slightly differently. Now, I figured out two instances which regularly and reliably activate the Active Display.
The first is when the phone is flat on a surface, if I pick it up to be perpendicular to the floor, either portrait or landscape seems fine, it will activate. I believe this actually works from almost any starting point as long as the end point is the phone being upright and vertical.
The second is with it again starting flat on the table. Holding it by the bottom of the phone, moving it semi-quickly across the table, only about 5 cm seems needed, and then stopping quickly. This is a strange one which I only found when I bumped it into something on the table. I have a case so was not bothered testing this repeatedly.
I know correct my first statement. The feature is not poop. Well, not total poop. There are other instances that will activate it but I don't know how to do them reproducibly. If that's a word.
Hope this helps someone.
Click to expand...
Click to collapse
When laying flat - give it a quick twist - about 45 degrees - and back again.
I see most don't agree with the implementation, but think about it. If it was more sensitive, it would be waking all the time. That's definitely less battery efficient.
Once you get used to it, it's not bad at all, and I can see devs adding more control over how it works - like a sensitivity setting.
Hint hint devs!
Phazmos said:
When laying flat - give it a quick twist - about 45 degrees - and back again.
I see most don't agree with the implementation, but think about it. If it was more sensitive, it would be waking all the time. That's definitely less battery efficient.
Once you get used to it, it's not bad at all, and I can see devs adding more control over how it works - like a sensitivity setting.
Hint hint devs!
Click to expand...
Click to collapse
Tbh, the more I use it, the more I understand why it has this implementation and you are right, there would probably be a battery burden to make it more sensitive. I just wish they could have advertised it. Maybe a deep dive YouTube video or something.
I just got the watch a couple of weeks ago and it was working fine till today. I just fully recharged it and turned it on. The display was partially dimmed it flickered and there were thin white lines on the screen.
I later restarted the watch but now it will just display a dark screen with thin white lines.
Tried resetting the watch again and now it wont even turn on.
The watch is waterproof so wearing it while swimming wasn't the issue?
What can i do?
Also sorry if this is the wrong section to post this, i tried the xiaomi forums but i god no help there.
Watch is water resistant, not waterproof. So swimming should be an issue.
droidhd said:
Watch is water resistant, not waterproof. So swimming should be an issue.
Click to expand...
Click to collapse
"The tracker can withstand a maximum of 1 meter of water for up to 30 minutes. Please note, submerging your tracker beyond the maximum depth or beyond the maximum time frame could potentially harm the device and cause hardware issues."
It was a short swim on the surface of the water so i see no problem here. Also how come the watch can withstand a 30 minute water touch and can't withstand more?
the watch is NOT waterproof, and its strongly advised not to swim with it. unfortunately, your unit is KIA.
I've seen already few users that had the same experience after swimming, they had to replace the unit, and its not covered under warranty as well.
sorry :\
TheModMan said:
"The tracker can withstand a maximum of 1 meter of water for up to 30 minutes. Please note, submerging your tracker beyond the maximum depth or beyond the maximum time frame could potentially harm the device and cause hardware issues."
It was a short swim on the surface of the water so i see no problem here. Also how come the watch can withstand a 30 minute water touch and can't withstand more?
Click to expand...
Click to collapse
That's the official description of a IP67 rating and how the exact tests are done. There is the time and the water pressure that the watch must withstand (1m water pressure).
However, even just swimming, which moves the arms and add water pressure by the movement of the watch can exceed the water pressure of 1 meter easily. Also sometime, washing the watch under running water can exceed the water pressure of 1m.
And yes to @1immortal, this rating is not waterproof, it is indeed called water resistant only.
Sorry for your watch.
Neuer_User said:
That's the official description of a IP67 rating and how the exact tests are done. There is the time and the water pressure that the watch must withstand (1m water pressure).
However, even just swimming, which moves the arms and add water pressure by the movement of the watch can exceed the water pressure of 1 meter easily. Also sometime, washing the watch under running water can exceed the water pressure of 1m.
And yes to @1immortal, this rating is not waterproof, it is indeed called water resistant only.
Sorry for your watch.
Click to expand...
Click to collapse
Thank you all for helping, i did though the problem was somewhere else and yes i missread the watch description in which it says it is water resistant which kinda mislead me thinking i can use it in water ( English is not my native language )
Crap. I washed my watch using the faucet. I hope no water got in.
My amazfit watch was working fine but once I switched it off its not turning on? What could be the issue.. there is a think white line appearing and its only one month
the official ads says IP68. when users face waterproof issues, suddenly everyone said it's only IP67. How come?
vulturext said:
the official ads says IP68. when users face waterproof issues, suddenly everyone said it's only IP67. How come?
Click to expand...
Click to collapse
Where is that stated?
https://us.amazfit.com/shop/pace?variant=25112 there it states IP67
fzelle said:
Where is that stated?
https://us.amazfit.com/shop/pace?variant=25112 there it states IP67
Click to expand...
Click to collapse
I'm not trying to be rude, but
http://amazfitcentral.com/amazfit-bip-specifications/ = IP68
https://www.gearbest.com/smart-watches/pp_962565.html = IP68
https://xiaomi-mi.com/mitu-watches/amazfit-bip-smartwatch-youth-edition-gray/ = IP68
http://www.smartwatchspecifications...it-smartwatch-youth-edition-bip-lite-version/ = IP68
and more.
vulturext said:
I'm not trying to be rude, but
http://amazfitcentral.com/amazfit-bip-specifications/ = IP68
https://www.gearbest.com/smart-watches/pp_962565.html = IP68
https://xiaomi-mi.com/mitu-watches/amazfit-bip-smartwatch-youth-edition-gray/ = IP68
http://www.smartwatchspecifications...it-smartwatch-youth-edition-bip-lite-version/ = IP68
and more.
Click to expand...
Click to collapse
You are pointing to the Amazfit BIP, not to the Amazfit Pace.
Two completely different devices
fzelle said:
You are pointing to the Amazfit BIP, not to the Amazfit Pace.
Two completely different devices
Click to expand...
Click to collapse
well OP doesn't state which Amazfit was it. So I just assumed. And there's a lot of people complaining their BIP is getting water inside the screen. This leave me wondering on the legibility of the ads.
Amazfit bip
vulturext said:
well OP doesn't state which Amazfit was it. So I just assumed. And there's a lot of people complaining their BIP is getting water inside the screen. This leave me wondering on the legibility of the ads.
Click to expand...
Click to collapse
Hi all,
My amazbit bip got water inside, and I bought that as the website standed it was IP68, so don't buy that piece of liar crap.
Regards
I've worn my bip whilst washing dishes, had it 2 weeks and the brightness & back light no longer work I can only point to this as otherwise it's had a pretty easy life till now
Got exactly the same problem. The BIP watch doesn't seems to be as resistant as specification says
I got the same problem my display gets blurry 1st then it keeps getting disappear until its fully off then later i plug my watchg to charger and it comes back
i dunno whats the issue it mostly happens when i am riding my bike and the watch is exposed in the winter air
but it happens much often when the watch is expose to weather but it turns on too lol
does anyone have a fix is it software or hardware
thanks
rezakhan70 said:
I got the same problem my display gets blurry 1st then it keeps getting disappear until its fully off then later i plug my watchg to charger and it comes back
i dunno whats the issue it mostly happens when i am riding my bike and the watch is exposed in the winter air
but it happens much often when the watch is expose to weather but it turns on too lol
does anyone have a fix is it software or hardware
thanks
Click to expand...
Click to collapse
On my side the watch display is now dead. 2 White Spots, the light on but no display... the watch died...
I solved the problem after swimming by extensive charging. I left the watch charging for over month (forgotten because I thougth it is death). But when I switched it on it was perfectly working. I think the heat helped it. Now I have the same problem and it was just raining a little bit
Amazfit Stratos screen crash
Sorry to necro this thread...
Not sure which model OP is talking about but...
I have an Amazfit Stratos that I bought 14 months ago - July 2019 (wow, just out of warranty ). Has been working fine until I had a shower while wearing it today. Suddenly the screen went berserk (sorry for my technical jargon there) but it still buzzes for notifications. To be clear, I have been wearing it while swimming and showering and washing for the whole time I have owned it because that is what the advertising indicates it can do. In fact it brags about having a swimming tracking functions and being water resistant to 50m in pool and ocean.
So now it is sitting in a bag of rice on a radiator hoping it will dry out and work again until I buy a suitable replacement.
Just a message to Xiaomi Huami if you're paying attention and care about return business: I never buy another product from a company if something I bought dies just out of warranty. It's a really bad sign, and I know I'm not alone. It's a really bad long term business strategy unless your product is so cheap to buy that customers consider it disposable. #poop
I just got a Stratos with latest international stock firmware 2.3.2.8. Unfortunately the floors counted is just 1-4 a day which should be at least 12-15. My floor height is exactly 10 feet or 3 meters as mentioned in the manual. My former Garmin Vivoactive 3 did count it correct. Is it a firmware issue of release 2.3.2.8 or is the barometer on my Stratos broken or is the watch in general not able to count the floors correctly? How is your experience?
The altitude during bicycle trips looks OK. But it looks more as derived from GPS instead of a smooth curve as I would expect from a barometer/altimeter.
I can confirm, counting climbed floors is very poor. Highest count was 6.
Normaly (with garmin devices) I get around 15-24 floors.
Thanks for the answer. However I want to make sure if it is a general problem or just some devices have a faulty barometer. Is there an app displaying the barometric pressure?
Same here, floors climbed not showing correctly. I read at reddit a plausible reason for it: It seems like the readings have some lag. That means, if you climb a floor and stay there for awhile it will be counted. Climbing up and down quickly won't be counted. That's what it seems the reason and what I experienced, too.
You can read the barometric pressure by opening the compass app and click on it once to get to the GPS data. There you will see the pressure on the right bottom corner. My barometric pressure freeze once. I had to factory reset to get it working again. But if your cycling readings seem OK and not stuck at a certain height you likely have a working barometer.
Edit: I'm on PACEficator with WOS 2.6.1.0.
Thanks you! I checked the compass widget and the barometer seems to work correctly, it shows the correct pressure for my area. Also when I walk up a floor the pressure changes by 0.3 hPa. This is correct as well. So it seems to be a calculation problem. I think the used floor height is more than 10 feet / 3 meters. In China buildings usually have higher ceilings because of the heat. I also have that my altitude diagrams look more like block diagrams. The altitude in GPX tracks is only updated quite rarely. Hence the altitude jumps up and down but overall is correct. Just not a smooth curve like it should be and is at Garmin.
Today we had falling barometric pressure because of bad weather coming. Floors counted were almost correct. This proves that the floor height is not as mentioned the 10 feet/ 3 meters but higher. Hopefully it will fixed soon.
Hello! I have the stratos 3 since january. However its the first time i bring it to a swim. But i was surprised that it didnt have training effect or rest time.... Which is sad because i "killed" myself swiming and as far as the watch is concern, im ready for a 5km run right away.
Also, shouldnt the watch measure the heart rate while swiming? I tried measuring with "running" mode and it seemed to measure fine underwater.
Training Effect works for Outdoor activities for me (running/cycling). Haven't had the chance to test while swimming. Fear of loosing the watch
iyengar said:
Training Effect works for Outdoor activities for me (running/cycling). Haven't had the chance to test while swimming. Fear of loosing the watch
Click to expand...
Click to collapse
Its water proof so i eould worry too much. And if it breaks warranty should cover.
Yeh runnin and jumping rope gives me TE. i dont have a bike to test cycling but should work like your case.