Related
I was testing out Skype with my Gtab and the mic is pretty terrible (no noise canceling). Is there any headset that would work with it?
I don't know the answer as far as a USB one. I use a Bluetooth headset and it works well.
My (admittedly not comprehensive) testing indicates that wired or bluetooth headsets do NOT use the microphone part. So while you are wearing your bluetooth headset record something and walk away from it while talking. When you play it back it is pretty clear (at least on my setup) that the audio is coming from the tablet's mic even though the playback is via bluetooth. Same for a Blackberry 3.5mm headset. Sound comes out, but does not come in.
I've often wondered also how hard it would be to get USB sound drivers going on Android so you could just plug in a cheapo USB sound dongle when you needed more sound umph. But I suspect that would be a big hassle. I have not really put in any effort to figure it out though.
I have the official Samsung cardock, and connected it to my car radio (the cardock has a 3.5mm jack output). Nice, now I can listen to the music on my phone over my carspeakers!
BUT:
Whenever I make or receive a call, the sound of the conversation keeps channeling through the phone's own external speaker. Disabling the phone's external speaker (either during the call or beforehand) does not fix it. It just néver get's through the 3.5mm jack output to my car stereo. Annoying, since my car is pretty loud when speeding.
[Q]How to channel the audio of a voicecall to the jack-output? Does anybody know of a fix for this? I have looked around-and-around-and-around, and have asked this before. Just can't believe I'm the only-one that is bothered by this!
I AM NOT LOOKING FOR BLUETOOTH-CARKIT-SUGGESTIONS, no matter how nice you guys mean it
Anybody any idea?
Nobody no ideas?
I would like to do this too, speeding along the motorway the phone speaker is just too quiet.
rickgillyon said:
I would like to do this too, speeding along the motorway the phone speaker is just too quiet.
Click to expand...
Click to collapse
Ah, at least I'm not the only one... Now let's hope some dev is bothered by the same problem
I guess this is gonna be one of those unanswered questions...
Bump-bumptie-dum
I recon if I bump long enough, someone with the solution should notice this question sooner or later; Although I realize that moment might be somewhere around 2015, with an answer like "Buy a galaxy S9 mate..."
Anyone?
Is the S9 there yet? Or else a solution to my problem?
I have a std aux input into my car stereo. Plugging a stereo 3.5 lead from the phone jack into the stereo aux I can listen to all sounds from the phone over all car speakers including calls... Just like when a headset is connected. Calls go over car speakers and phone mic picks up voice.
It would seem then that its the official samsung dock being treated different to a simple direct lead connection.
My only gripe is during calls the phones mic works but thinks its on a std call and is a bit weak. Wish I could force the mic into speakerphone mode or the levels associated with that mode anyway. Btw... Turning on speakerphone while lead is connected stops the output over the speakers.
I have a trrs mic / stereo splitter adapter and a seperate car 3.5 mic but again the mic levels on the phone in headset mode need boosting.
Sent from my GT-I9100 using Tapatalk
EzDingo said:
I have a std aux input into my car stereo. Plugging a stereo 3.5 lead from the phone jack into the stereo aux I can listen to all sounds from the phone over all car speakers including calls... Just like when a headset is connected. Calls go over car speakers and phone mic picks up voice.
It would seem then that its the official samsung dock being treated different to a simple direct lead connection.
My only gripe is during calls the phones mic works but thinks its on a std call and is a bit weak. Wish I could force the mic into speakerphone mode or the levels associated with that mode anyway. Btw... Turning on speakerphone while lead is connected stops the output over the speakers.
I have a trrs mic / stereo splitter adapter and a seperate car 3.5 mic but again the mic levels on the phone in headset mode need boosting.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hmm... So maybe if I use a splitter to merge the signal from both the cardock AND the phonejack...
Thnx m8! Not entirely what I was looking for (one more thing to do when plugging in my phone in the car), but it just-might-work!
Will report back
Just note I do not 'need' the splitter to make it work. Without a splitter it works just fine using car speakers and the phones mic (as the aux lead is std audio lead only - not including the third ring position for the mic).
I just got the splitter to use a seperate external mic in the car. The splitter simply has all 3 rings to make phone think its a full headset connected like the set that comes in the box with the phone and splits audio and mic into 2 seperate connections. This way I then take the std aux lead from the audio split to the stereo for listening over the car speakers and use the mic split for plugging in any std 3.5 external mic.
EzDingo said:
Just note I do not 'need' the splitter to make it work. Without a splitter it works just fine using car speakers and the phones mic (as the aux lead is std audio lead only - not including the third ring position for the mic).
I just got the splitter to use a seperate external mic in the car. The splitter simply has all 3 rings to make phone think its a full headset connected like the set that comes in the box with the phone and splits audio and mic into 2 seperate connections. This way I then take the std aux lead from the audio split to the stereo for listening over the car speakers and use the mic split for plugging in any std 3.5 external mic.
Click to expand...
Click to collapse
I understood that, it's just that I would probably need a splitter in my specific situation, since all my music gets played through the cardock by default as soon as I plug in the phone... It's possible to disable this automatic switch of audiorouting when the phone get's plugged in though, but somehow it just doesn't feel right to NOT use the audio-out feature of the cardock
This seems to be a known problem, but after a day of research, I still don't see a solution, or really understand if this will eventually be fixed by (1) a developer update by someone here much smarter than me, (2) a Samsung update, or (3) will never be fixed.
Issue is:
When the SGS3 headphone is engaged (ie: a stereo phone cable from my SGS3 to my car AUX input), you cannot hear and calls in or out from the built in auto bluetooth (mine is an Audi A3). I've tested many alternatives seen on these forums including, TTY settings, call settings, grinding down the stub of the cable so it doesn't fully engage the headphone, etc.
All to no avail, as when the headphone is engaged (a notification of this pops up on the screen), the default sounds ALL go to the headphone source. Of course, the car mutes the audio mode when the bluetooth is enabled, so the sound is lost! What needs to happen is that the phone needs to allow the phone sounds to flow through the bluetooth. Why this doesn't happen by default confuses me. Never had a problem with my HTC Inc2.
Can a solution to this be developed by some of you talented guys out there working on fixes and mods?
[email protected] said:
This seems to be a known problem, but after a day of research, I still don't see a solution, or really understand if this will eventually be fixed by (1) a developer update by someone here much smarter than me, (2) a Samsung update, or (3) will never be fixed.
Issue is:
When the SGS3 headphone is engaged (ie: a stereo phone cable from my SGS3 to my car AUX input), you cannot hear and calls in or out from the built in auto bluetooth (mine is an Audi A3). I've tested many alternatives seen on these forums including, TTY settings, call settings, grinding down the stub of the cable so it doesn't fully engage the headphone, etc.
All to no avail, as when the headphone is engaged (a notification of this pops up on the screen), the default sounds ALL go to the headphone source. Of course, the car mutes the audio mode when the bluetooth is enabled, so the sound is lost! What needs to happen is that the phone needs to allow the phone sounds to flow through the bluetooth. Why this doesn't happen by default confuses me. Never had a problem with my HTC Inc2.
Can a solution to this be developed by some of you talented guys out there working on fixes and mods?
Click to expand...
Click to collapse
Maybe if you go into the control panel of your car's built in computer and check the audio and Bluetooth settings it has, that might fix things.
Thread moved
This does not belong in Development.
So you have bluetooth for phone only and younlisten to your music with aux in? I would say if you had an aux in cable with the mic on it like the headphones, then the phone audio would go out over to the radio... But do they make those or how hard would it be to hack your free headphones you got into a double male aux cable
There are no options anywhere in the car settings.
Car mutes phone audio.
Juicy92 said:
So you have bluetooth for phone only and younlisten to your music with aux in? I would say if you had an aux in cable with the mic on it like the headphones, then the phone audio would go out over to the radio... But do they make those or how hard would it be to hack your free headphones you got into a double male aux cable
Click to expand...
Click to collapse
The sound does go through the phone audio already. But like almost all cars, when the car sees a bluetooth call in or out, it MUTES the audio coming in from the radio, the CD, or any AUX input. The phone should send call audio through bluetooth, but it does not.
Is it not possible to either play the music through the bluetooth or to turn off bluetooth all together. The phone mic would pick up wouldn't it
This is only possible if you have a newer car stereo with A2DP.
Sent from my SCH-I535 using xda app-developers app
So is this just a Samsung problem for me, or for all?
So I am correct that nobody with a bluetooth car phone setup (but no bluetooth streaming) is able to plug their headphones into their aux jacks and still make/receive calls?
Or is this related just to the SGS3? Or just to my Audi bluetooth options?
Would an eventual solution come from a xda brainiac update, from Samsung, or somewhere else?
Do some of you have built in car setups (no bluetooth streaming) that DO WORK with the headphones plugged in?
I can attempt to pair to my brothers car today or tomorrow if that will make you feel better. My bluetooth setup is aftermarket and streams both
I am also curious as to what happens if you don't have bluetooth enabled at all
What about car audio only. Wouldn't it automatically mute your music and then throw the call over bt or is the aux out overpowering the bluetooth signal. Let me look for a way to possibly disable the process that starts when you plug in headphones. Don't count on anything though
---------- Post added at 01:11 AM ---------- Previous post was at 12:52 AM ----------
I was doing a little brainstorming here and even though I am quite a novice with tasker, you may be able to make a task that pauses music and transfers call to bluetooth when both bluetooth and headphones are connected. I am not sure if it is an input device problem or if the phone is just dumb or what, but it may be worth a shot
Juicy92 said:
I can attempt to pair to my brothers car today or tomorrow if that will make you feel better. My bluetooth setup is aftermarket and streams both
I am also curious as to what happens if you don't have bluetooth enabled at all
What about car audio only. Wouldn't it automatically mute your music and then throw the call over bt or is the aux out overpowering the bluetooth signal. Let me look for a way to possibly disable the process that starts when you plug in headphones. Don't count on anything though
---------- Post added at 01:11 AM ---------- Previous post was at 12:52 AM ----------
I was doing a little brainstorming here and even though I am quite a novice with tasker, you may be able to make a task that pauses music and transfers call to bluetooth when both bluetooth and headphones are connected. I am not sure if it is an input device problem or if the phone is just dumb or what, but it may be worth a shot
Click to expand...
Click to collapse
Your setup is not like mine, and should probably work, as you don't have to plug in the headphone jack. Yes, the problem is that IF the headphone jack is plugged in, ALL sound output goes through that and the bluetooth is disabled (even the symbol on the phone screen is grayed out.
With your bluetooth plugged in, just try putting the earbuds in the phone, then make a call to anyone, then see if your bluetooth icon on the phone call is not grayed out. Now unplug the ear buds and see if the icon doesn't come back on. This is the problem I have.
Never had any problems with either stereo worked fine in my altima and benz. I used aux + bluetooth no problem on my epic4g for the past 2 years and when I first got my s3 it was working until I did an update. Then it broke it.
Sick of having to unplug the aux cable everytime I get a call to allow it to switch to bluetooth
Need some people to test this, please...
I'd like to see if the problem is with the rooted phone image or if this problem also exists on stock, unrooted phones.
If you can:
1) pair your phone to your factory car bluetooth, or even a bluetooth headset that does not stream audio.
2) have any pair of headsets or an aux cable ready to plug in.
3) make a call using the bluetooth to anyone (ideally something that has an automatic answer phone cue like this 919-238-2000)
4) while the call is proceeding with the car bluetooth or bluetooth headset, plug in the headphones, or any cable into the headphone jack.
5) WHAT HAPPENS???
Is it (a) you still hear the phone call through the bluetooth, or
(b) you don't hear the call any more and the bluetooth headset icon on the phone pad goes out?
6) Please state what phone you have, what provider you have, and whether the phone is stock or rooted.
THANKS.
[email protected] said:
I'd like to see if the problem is with the rooted phone image or if this problem also exists on stock, unrooted phones.
If you can:
1) pair your phone to your factory car bluetooth, or even a bluetooth headset that does not stream audio.
2) have any pair of headsets or an aux cable ready to plug in.
3) make a call using the bluetooth to anyone (ideally something that has an automatic answer phone cue like this 919-238-2000)
4) while the call is proceeding with the car bluetooth or bluetooth headset, plug in the headphones, or any cable into the headphone jack.
5) WHAT HAPPENS???
Is it (a) you still hear the phone call through the bluetooth, or
(b) you don't hear the call any more and the bluetooth headset icon on the phone pad goes out?
6) Please state what phone you have, what provider you have, and whether the phone is stock or rooted.
THANKS.
Click to expand...
Click to collapse
I'm pretty sure I wasn't rooted the first time I tried it. In any case, I wrote to Samsung support on Facebook, and got this reply:
"Hi Chris, thanks for reaching out! You are correct, you cannot use both Bluetooth and Aux at the same time. A few of our customers found a work around by using an A2DP profile with hands free in the car. I apologize for the inconvenience."
So we know they are getting reports or they wouldn't push AD2P as a solution. I think if enough people write in, they will fix this in an update. We really need a critical mass of people to complain to Verizon and Samsung for this to happen. He did say when I replied asking about a fix, that he had passed my concerns on, etc., etc.
Mention "lawsuits from car accidents" when you write in...
sluzbenik said:
I'm pretty sure I wasn't rooted the first time I tried it. In any case, I wrote to Samsung support on Facebook, and got this reply:
"Hi Chris, thanks for reaching out! You are correct, you cannot use both Bluetooth and Aux at the same time. A few of our customers found a work around by using an A2DP profile with hands free in the car. I apologize for the inconvenience."
So we know they are getting reports or they wouldn't push AD2P as a solution. I think if enough people write in, they will fix this in an update. We really need a critical mass of people to complain to Verizon and Samsung for this to happen. He did say when I replied asking about a fix, that he had passed my concerns on, etc., etc.
Mention "lawsuits from car accidents" when you write in...
Click to expand...
Click to collapse
I have an issue when it's plugged in via Auxiliary there's a nasty echo the caller hears on the other end because of this headphone mode. Anyway to turn it off?
I will probably return it for this reason amongst others.
Belkin Y37 from Amazon will solve this issue, or provide an alternative.
I can fully confirm the functionality of the Belkin F8Z492TTP. It is now custom installed in my A3 with a direct power hookup and direct connection to the aux input. For power, I had to hook up a 12 volt car outlet behind the dash, insert a 12v to usb adapter, and splice the power cord from the factory transformer to a USB cable. Power is with a micro type H plug that Radio Shack does not have. They should give you a usb to type H cable with it.
Anyway, the Galaxy S3 will connect to two bluetooth devices at the same time...the Audi bluetooth and the Belkin Y37 Bluetooth. I put a shortcut button for bluetooth on my home screen which pulls up the options. You DO HAVE TO RECONNECT BLUETOOTH each time you get in the car, but you had to manually plug in the cable the other way.
When a call is made, the car bluetooth takes over with full steering wheel controls, and when it ends, the audio goes back on (I think automatically). Since I have constant power to the Belkin through the 12v, if you step away and then come back, you can automatically regain your connection, which is nice.
I did the modification to the Belkin where I broke it carefully open and pulled the metal innards that are purely designed to give it a feeling of mass. All that is inside is a teeny circuit board that must have cost $1 tops! Belkin lists this at $50, although it is half that on Amazon.
All in all, a decent solution to a frustrating problem. Sound is pretty decent.
Has anyone noticed terrible noise when using an S3 docking system or cable to output both Audio and Charging?
- extreme hiss and random noise, machine processor noise, crackle etc. (only if charger is plugged in as well)
- after 2 seconds of no sound, you can hear what resembles to be an AUDIO gate...that kicks in and mutes the noise until you trigger your next button sound.
- Even if you listen to a song, and think it doesn't happen while listening to a song...IT'S still there...fighting the song and causing degradation in Audio quality.
- not too mention, phone calls will NOT route through the USB jack, and music and navigation type stuff.
- if you unplug the charger, the sound cleans right up and sounds fine. It's the combination of having the audio and charging outputs all in one.
- ground loop isolators do not help
I have a background as an audio technician and some electronics skills and I did hours of testing and modding...unfortunately! All failed. I own an Ibolt car cradle (which I did most of my testing with), a KiDiGi desktop docking cradle, and I even hand made a cable that could trigger docking mode. All three of these scenarios FAILED with the NOISE factor.
I have resigned to thinking it is a hardware design bug with the S3. I have modified my Ibolt so that it sends out audio from an extra cable that plugs into the Headphone Jack...which as a bonus, as sends Dialer audio.
(I just realized that this is the i9300 thread, and I have a i747m but maybe this thread could help all the same)
I've had three S3's and used USB audio out to my car stereo via 3.5mm. None ever generated any additional noise.
CZ Eddie said:
I've had three S3's and used USB audio out to my car stereo via 3.5mm. None ever generated any additional noise.
Click to expand...
Click to collapse
Eddie...can you confirm these points:
1) You have a usb cable or dock that comes out the bottom of your S3, and it splits into USB for charging....and 3.5mm for audio? (NOT THE HEADPHONE OUT)
Is it a cable or dock and would you mind tell me the name of it?
2) What do you plug the audio into?
- stock car audio input
- front aux input on a car deck stereo system (stock/aftermarket)
- rear aux inputs to aftermarket stereo
- other?
3) with the steareo turned up fairly loud, but no music playing, do you hear any noise when you click buttons (assuming you have audio enabled for button clicks in Android settings) When pausing between loud music, do you hear any white noise, machine noise, hiss etc.?
4) What is your S3 model? (i9300?) and what OS version.
themadproducer said:
1) You have a usb cable or dock that comes out the bottom of your S3, and it splits into USB for charging....and 3.5mm for audio? (NOT THE HEADPHONE OUT)
Is it a cable or dock and would you mind tell me the name of it?
Click to expand...
Click to collapse
I've used the Samsung Infuse and also iBolt docks. Both have the split USB cable for charging & 3.mm audio.
themadproducer said:
2) What do you plug the audio into?
- stock car audio input
- front aux input on a car deck stereo system (stock/aftermarket)
- rear aux inputs to aftermarket stereo
- other?
Click to expand...
Click to collapse
I use the front AUX input on my JVC car stereo.
themadproducer said:
3) with the steareo turned up fairly loud, but no music playing, do you hear any noise when you click buttons (assuming you have audio enabled for button clicks in Android settings) When pausing between loud music, do you hear any white noise, machine noise, hiss etc.?
Click to expand...
Click to collapse
I don't remember any noise when clicking buttons?
But we're talking about AUX input which is analog, so when you turn the volume up with no music playing, you'll always hear some "soft" occasional clicks & hiss.
themadproducer said:
4) What is your S3 model? (i9300?) and what OS version.
Click to expand...
Click to collapse
AT&T GS3 with various ICS ROM's. I don't use AUX anymore because my favorite ROM (AOKP) doesn't have audio out capability when docked.
CZ Eddie said:
I've used the Samsung Infuse and also iBolt docks. Both have the split USB cable for charging & 3.mm audio.
I use the front AUX input on my JVC car stereo.
I don't remember any noise when clicking buttons?
But we're talking about AUX input which is analog, so when you turn the volume up with no music playing, you'll always hear some "soft" occasional clicks & hiss.
AT&T GS3 with various ICS ROM's. I don't use AUX anymore because my favorite ROM (AOKP) doesn't have audio out capability when docked.
Click to expand...
Click to collapse
Thanks for replying Eddie. I am so sick of this troubleshooting this crap sometimes. I am very happy with the S3. It is a giant leap forward from my HD2...in most ways...but not all. I am suspecting the USB audio out on my S3 has a defect.
Right now, in the car, I have resigned to using the USB for power and the Headphone jack for audio send to the AUX input of my Sony car stereo on a custom wired Ibolt docking cradle. I still get some PROCESSOR noise when pressing the buttons but it is about 5% of the intensity of using the stock wired Ibolt, or KiDiGi desktop dock...or my hand wired Ycable. Without the USB charging wired up, there is NO NOISE whatsoever with either method.
Digital Output
Reading many threads last night, I discovered that with some roms/kernels, it is also possible to output pure DIGITAL audio from the S3 USB port into a select number of little affordable boutique like amps which decode and amplify the audio and power spkrs and headphones.
My first S3 had some weird noise when using bluetooth. So I drove over to my local corporate AT&T store and let them know. They walked out to my car with a demo S3 and we tested it and it didn't have any noise at all. So they swapped out my phone for a new one and I've been happy ever since.
Maybe you could try that?
Regarding boutique amps... this guy in one of my threads was talking about that. I didn't understand half of what he said.
http://www.diymobileaudio.com/forum...h-compatible-car-stereo-deck.html#post1674875
CZ Eddie said:
My first S3 had some weird noise when using bluetooth. So I drove over to my local corporate AT&T store and let them know. They walked out to my car with a demo S3 and we tested it and it didn't have any noise at all. So they swapped out my phone for a new one and I've been happy ever since.
Maybe you could try that?
Regarding boutique amps... this guy in one of my threads was talking about that. I didn't understand half of what he said.
http://www.diymobileaudio.com/forum...h-compatible-car-stereo-deck.html#post1674875
Click to expand...
Click to collapse
Yup that's it. There are a few examples on youtube. Interesting how it's this TRADE SECRET feature. I mean, I have not seen this advertised anywhere and the places on the net where I found examples....the guys talk about it as if it's this common well known feature. Apparently, next to having one of these setups, the Iphone4 has the the best rating for sound/volume/curve output...almost neck to neck with a dedicated DAC...I think they call it!
I bet if I spent another $100+ bucks for one of these amps, and ran it in my car through a power Inverter (12v to 110v inverter), that I could run the Digital signal out without the interference of my USB analogue out issue. But, I am past that now.
Thanks for your input Eddie!
DAC direct solved this problem for me with Siyah Kernel.
This also happens when you are charged with a car charger and using the line out.
Sent from my GT-I9300
Arkanius said:
DAC direct solved this problem for me with Siyah Kernel.
This also happens when you are charged with a car charger and using the line out.
Sent from my GT-I9300
Click to expand...
Click to collapse
Arkanius...are you saying...
1) You had the same terrible noise when charging in a car.... with usb audio analogue into aux input of car stereo?
2) and that you hooked up a DAC to resolve the car noise issue? If yes, would you mind sharing the DAC model with us and the cable used?
Although I may be digging up an old thread, it may be worth looking into (Currently majoring in Electrical Engineering and having completed two signal analysis classes).
themadproducer, were you able to get a spectrum output of the noise? If it just a set of static frequencies, a cascading array of notch filters may work out
EDIT: reading your mention of the USB charging, its quite possible that if the voltage converter is of cheap quality, the transistors involved in the voltage conversion from 12.0-14.0 Volts DC down to ~5.0 Volts DC may be giving off Radio Frequency noise, with the noise being picked by the audio cable due to physical proximity, akin to cross-talking in network cables ( a form of mutual inductance)
thanks for reading this. I searched but couldn't find anything strongly pertinent.
If listen to media, perhaps a podcast (podcast addict) or music (poweramp), then it comes out of the speaker until I plug in a headset (my old Samsung headphones work OK), and sound switches over. The headset plug has the usual tip + 3 rings.
If I plug in some external speakers, the sound doesn't cut over to the speakers on the headphone socket, so audio continues on the speaker. The speaker plug has tip + 2 rings.
My guess is that the Xperia detects the speakers from a change in impedance, rather than a switch? Or could it be the speakers's connector isn't sensed because it's only a stereo jack not stereo + mic jack?
I can't find any manual override settings in any control panel.
thanks for any ideas.
Paul
Continuing to think about this, I considered there might be an app which allows manually switching between speaker and headphone.
A bit of research and I found SoundAbout, which is far more powerful than I need as it allows you to override audio routing to any output such as bluetooth, hdmi, headphones, dock etc.
https://play.google.com/store/apps/details?id=com.woodslink.android.wiredheadphoneroutingfix
What I specifically like about this is it gives you a simple widget to toggle speaker and headset.
Of course, I'd rather the built-in switching worked, so I am still open to ideas, thanks.
Well I use some normal headphones which are standard mini jack with 2 rings and it transfers fine so I don't think it has to do with the need for 3 rings. What are the speakers out of interest?
Sent from my C6833 using XDA Premium 4 mobile app
I've had the same problem but it's not related to what I plug in, it's just random. Sometime's it's my headphones that came with the Z Ultra and sometimes it's a Monster 1/8 inch cable for plugging into my car's stereo. I think others have posted the same issue with it not detecting something plugged in. Luckily it's pretty rare for me, every month maybe.