HI,
Im using a galaxt tab GT-p1000 3g froyo 2.2 which is bought from dubai . there were few issues since last few weeks where i could not boot the device. I have done the factory reset few times also. After that i rooted the device using oneclick(SuperOneClickv1.9.5-superoneclickdownload.com) it was completed and rooted where i got the superuser too.now the device is not getting booted again. it shows the samsung logo and getting dragd.i tried reset and reboot through the recover mode that also dosnt work.
please help me with this
kasun
Download Odin. http://www.android.gs/download-odin-3-07/
Find the original firmware for your device and download to your PC. (I can't help you with this)
Turn your phone off.
Boot into download mode on your phone (volume down + power button; hold for about 3 seconds whilst it boots).
Plug your phone into your PC via USB. Wait for the ID:COM message to show in Odin.
Follow the instructions here to flash the firmware onto your device: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Reboot.
You WILL lose any data you have that isn't on an external SD card. That is the only data which will be safe.
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
Hey guys,
So really in need of a little help. My OnePlus X started acting strange when it refused to take charge when it was booted into OS (Lineage). However, I noticed that if the phone was off, it would boot immediately upon connecting a cable. So it seemed as if nothing was wrong with the port or the cable (tried various cables and chargers). A little more digging revealed that the phone charges in Fastboot mode. Anyway, I decided to factory reset it and for some reason it was stuck in a boot loop.
I then tried to restore back to stock using Mega Unbrick Guide which worked in the past. Now my problem is that its stuck in fastboot, wont boot into the OS. I can boot to the recovery and fastboot. In recovery when I choose Install from local, i get no browser to search the SD for zip files, nor does the phone detect for me to use adb sideload.
Any ideas as to why this is so?
Thanks!
Hi,
My Samsung GT-N8000 was working perfectly a few months ago, then out of the blue I started it up to an error which says, "Encryption unsuccessful, encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you must perform a factory reset etc..." So naturally I tried entering into twrp recovery in bootup using the power button + volume down but for some reason I cannot access recovery, it just shows samsung galaxy logo TWICE and then proceeds to normal bootup which leads to the encryption unsuccessful message. (Download Mode still works tho...) So I tried using Odin to recover twrp but nooo ,Odin decides not to recognize my device.
I've tried every possible instructions I could find online but to no avail... So I've quickly created an account here just to post this query out of frustration. listed below are some the things I have already tried.
-Updated Samsung USB Drivers on my PC, Laptop and friends PC
- Using Odin on another PC
- Used 3 different USB Cords on my GT-n8000 but still the same.
-tried all the ports on my PC, Laptop and friends PC
PS I've flashed Lineage OS on my device and it was rooted.
Any help will be very much appreciated
Cheers! :good:
maybe get a keyboard and use the port on the keyboard insead
Archronin said:
Hi,
My Samsung GT-N8000 was working perfectly a few months ago, then out of the blue I started it up to an error which says, "Encryption unsuccessful, encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you must perform a factory reset etc..." So naturally I tried entering into twrp recovery in bootup using the power button + volume down but for some reason I cannot access recovery, it just shows samsung galaxy logo TWICE and then proceeds to normal bootup which leads to the encryption unsuccessful message. (Download Mode still works tho...) So I tried using Odin to recover twrp but nooo ,Odin decides not to recognize my device.
I've tried every possible instructions I could find online but to no avail... So I've quickly created an account here just to post this query out of frustration. listed below are some the things I have already tried.
-Updated Samsung USB Drivers on my PC, Laptop and friends PC
- Using Odin on another PC
- Used 3 different USB Cords on my GT-n8000 but still the same.
-tried all the ports on my PC, Laptop and friends PC
PS I've flashed Lineage OS on my device and it was rooted.
Any help will be very much appreciated
Cheers! :good:
Click to expand...
Click to collapse
release power button when the first galaxy logo pop up but keep Hold Volume down
I have a galaxy A7 2018 (SM-A750F) that I wanted to root. I flashed the specific TWRP recovery .tar file for my device using Odin, but I pressed the volume up + power key before the success message appeared on Odin. Now I'm stuck in a TWRP bootloop when the homepage of the TWRP mode flashes (basically just the logo and the version number) for a few seconds, then a black screen appears and the phone reboots back into the same mode when I press volume down and power keys. Eventually, the TWRP homepage screen flashes on and off and the logo appears to be distorted.
I tried accessing my phone using adb, but it shows that no devices are connected, and I made sure to enable USB debugging before the whole process. Could the usb port have been damaged because of the process? It was 100% functional.
My phone is also overheating, even when it is turned off.
My phone is also overheating, even when turned off, even when the screen is off
I don't really know what to do at this point. I even tried tapping on the black screen but no short vibrations occurred, so I guess the whole TWRP mode is corrupted. Any help would be best welcome!
Same issue and my phone's os is bricked so I can't even boot to the os / boot loader / download manager to flash stock files
LadyAmy said:
Same issue and my phone's os is bricked so I can't even boot to the os / boot loader / download manager to flash stock files
Click to expand...
Click to collapse
any updates