hello ,first.
i have a note 20 sm-n980f and my service provider software is cho.
i want to replace my service provider to ilo as it also my counrty and also i want to record calls throue rom,
i have unlocked my bootloader , ome unlocked, and flashed twrp via odin.
next i did format data -yes.
and the other wipe...marked all and sweped to wipe.
after that booted my device to recovery mode
there i choose wipe data/factory reset
and wipe cache after.
i have donloaded SM-N980F_ILO_N980FXXU1CTL5_N980FOXM1CTL5_N980FXXU1CTL5_N980FXXU1CTL5
unrar it,and flashed abl,ap.cp,csc via odin
the csc is CSC_OMC_OXM_N980FOXM3DUI5_CL22307827_QB43208332_REV01_user_low_ship_MULTI_CERT.tar
device is rebooting and somehow ,although i'v flashed ilo csc, , my service provider keeps staying cho :0(
i have also tried flashing only the csc file after system up,by tapping usb debuging ,go into download mode and flash only csc.
device is rebooting and after that i got a cute android wich says "erasing" for a few sec,and then system gose up with cho service provider again
what m i missing?
Related
Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
Hello,
I've been trying to unroot my SGS3 several times 2day using the following checklist:
1- Run Triangle Away
2- Reset Flash Counter
3- Factory reset from CWM
3- Clear Cache from CWM
3- Clear Dalvik from CWM
(Here I noticed that "SYSTEM STATUS" turned to costom)
4- Ran setup for the phone
5- flashed several roms from sammobile (one for each run)
6- Booted rom
(Here it started bothering about messaging service crashed, after some googling I found that I should flash the NEE CSC)
7- Flashed NEE CSC
8- checked that the CSC is correct
9- done a factory reset
At this point I should be good to go... BUT
- Kies say that my phone doesn't support updates
- the device status say that it's modified
Anyone know what I'm doing wrong... I've done a day of googling, testing and failing, so fingers crossed :crying:
On your rooted device :
1) Install and run TriangleAway
2) When phone reboots, remove the battery IMPORTANT
3) Put battery and directly start Recovery mode.
4) Wipe your Data / Wipe your Cache / Wipe your Dalvik cache
5) Don't setup phone / Don't start phone IMPORTANT
6) Reboot in Download mode
7) Flash the latest ROM corresponding to your phone country or providers. For example, if you have Vodafone device, flahs Vodafone rom, not another one.
8) Reboot in Normal mode your phone.
9) Don't settings-up but go on Settings, and make a factory reset. It will restart and will be unroot. Statuts will change to Normal.
10) Change CSC if necessary ( *#272*IMEI# or use CSC changer on JellyBean).
This can be sumarized in 2 methods:
1) Run Triangle Away
2) Flash stock NEE ROM using Odin3 (from PC).
Simonetti2011 said:
This can be sumarized in 2 methods:
1) Run Triangle Away
2) Flash stock NEE ROM using Odin3 (from PC).
Click to expand...
Click to collapse
That is right but don't forget to wipe data/cache/dalvik and don't restart between TriangleAway and Flashing stock NEE ROM.
--Double Post--
The way I did things this time:
1- Install Triangle Away and reset counter
2- Pull battery as soon as the S3-logo shows
3- Entering CWM and setting factory reset, clear cache and clear dalvik
4- Entering Download Mode and flashing I9300XXALE8_I9300NEEALE3_NEE
5- /tried both/
5.1- Booting into android and taking a factory reset
5.2- Entering stock recovery and taking a reset from there
6- Booted into android and waiting for 10 minuttes in order to make the device status show
7- Making sure that the status is 'Normal'
8- /tried both/
8.1- Updating via OTA
8.2- Updating via Kies
9- Waiting for 10 minuttes in order to make the device status show
10- Device Status has changed to 'Modified'
Getting really confused here... Both update methods I'm using are official Samsung sources for updates, so I don't understand head or tail of what's going on here...
Basically your problem is that Kies does nor recognize the codes you present to it .
A Kies forum or even a Samsung forum may help .
Or join XDA and flash a stock rom.
Use CHECKFUS to download any current firmware and fl;ash via odin .
jje
I'm going to send it in to samsung for service, so I'd like to get the original method working... no chance for that?
anyone?
cokesmoke said:
I'm going to send it in to samsung for service, so I'd like to get the original method working... no chance for that?
anyone?
Click to expand...
Click to collapse
Have you tried restoring with Kies? I mean using Kies - Fastvareoppgradering/initialisering - WITHOUT phone connected! It will ask you for a model and serial number (both under the battery), and will show your last official firmware, then you can connect the phone in Odin download mode, and it will restore it. You might need to do it twice.
Sorry for the late reply, but life demanded some attention...
I've tried using KIES to do this with very little luck.
I tried
1)
- Run Triangle away
- Pull battery after applied
- Reset everything I could in CWM
- booted into download mode
- ran Kies restore by model and serial number
- started up
- Resetted
2)
- Run Triangle away
- Pull battery after applied
- Reset everything I could in CWM
- booted into download mode
- ran Kies restore by model and serial number
- Pulled battery on Samsung logo
- Reset via recovery
- started up
- Resetted
both of these leave the device with status: Modified
I'm all out of ideas on how to do this right about now... anyone else got any ideas?
Found this: http://forum.xda-developers.com/showthread.php?t=1904099
Anything like it for the International version?
Run TA
Check counter=0 in download mode.
Use ODIN to flash a stock firmware.
After TA I get the following status:
ODIN MODE
PRODUCT NAME: GT-I9300
COSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
After flashing either through Sammobile downloaded firmwares or Kies-Flashing it changes to
ODIN MODE
PRODUCT NAME: GT-I9300
COSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
and status is Modified
tried a factory reset at this point?
Yes,
Tried letting it rest on the homescreen for 15 minuttes and then resetting it as some guides say, but no luck
hmm, which firmwares have you tried?
I used DLJ4 for the UK to unroot yesterday and it worked fine.
I'm confused now...
I tried again from scrach...
- Flashed CWM through Odin
- Booted and installed TA
- Ran Triangle away
- Resat counters
- Pulled battery at samsung-logo
- Booted into CWM
- Resat everything I could
- Booted into download mode
- ran Kies firmware update using model and serial
- booted
- waited 15 minuttes
- resat to stock settings
- confirmed that status was still modified
- resat again
- booted into download mode
- confirmed that it still said "SYSTEM STATUS: Custom"
- Ran firmware update from Kies using model and serial again
- Booted
- Status Normal
Don't know what happened here, but you don't hear me complaining!
Thank you to everyone that tried helping me... sending it in for repairs on Monday =D
Glad to hear its sorted
OK, more confused...
Setting up google account and letting the mobile lay in the charger for a while... and when I'm coming back to it... it's back to modified
Hi to anyone reading this
1 month ago i decided to try a custom rom on my galaxy S3
to cut a long story short it wiped my emei and i have had to send the phone back to samsung for repair
I have just recieved the phone back so thought the 1st to do would be follow a guide on backing up the emei
Ok most guides want the phone to be rooted
so i used odin to flash the phone with a cf auto root
and now the phone just boots into download mode!!
things i have tried is wipe dalvik cache and factory reset
holding down power, leaving battery out nonthing works just straight back to the download page
i have flashed a custom recovery but as soon as it reboots after the samsung logo im straight back to the download screen
i cant believe im straight back to having no phone again
i dont want to flash a rom as i have no emie backup
this is bringing a grown man close to tears
is there a product name in download mode?
if yes thats good.
since you are in download mode why not use kies to initialise your device.kies is the official way to fix things. download the software go to firmware upgrade and iniitialisation , enter your model no GT-I9300 and the serial number from under your battery. connect the phone to your pc while in download mode then if your phone is able to complete that process see if it boots , if not factory reset it. if it boots and imei is corrupt ,not there or generic, . then flash a stock rom that has an mg2 or mg4 baseband using odin
good luck
Check which auto root file you used
OK i was having a lot of problem with my samsung s3. It was hanging a lot. The phone hangs every time. so was fed up with that a lot.
So i tried to factory reset from the reset menu. The phone switched off and after restarting it is not booting. It gives error - No command with a green adnroid laying down.
I dont know about the firmware version and modem and etc. But it was on the India Stock Rom no root.
I am able to go to the download menu only, no booting and no reovery mode..
Flash a stock firmware with Odin, then factory reset again in recovery.
Hi, i just had this thought to flash my s5830i with os rom.
However, the action fail and I'm facing the situation that i can't get into recovery nor reboot. Each time i connect to the charger, the model name appear and the screen stay there. Is there any possible solution i could fix this ?
I think i might accidentally wipe off all data including EFS and IMEI.
flash stock rom via odin