I was recently trying to flash my Nokia 7.1 using OSTLA tool but during the flashing process my PC ran out of power and shut down, I charged it and tried the flashing process again but the flash tool (I.e OSTLA) keeps giving me this error:
Error Code: 0xc6d7
Error: Download fails,
Error = SE ERR_ADB_CMD_DEVICE_WRITE_FAIL (0xC6D7).
Please any help is highly appreciated Thanks.
Related
I need some help with my cellphone, when the system starts it loops in motorola logo.
Yesterday a friend gave me an Atrix 4G with this problem. I don't know what version of android it was using or if the bootloader was locked so i tried to repair it by flashing an stock 2.3.4 .sbf with RSD Lite but it fails and windows give me an error with "qhsusb_dload failed to install the driver". Then i tried to install the stock 2.3.6 and the process fails again but this time there is no qhsusb_dload problem or at least windows doesn't shows it.
RSD Lite gave me this:Failed flashing process. Interface AP-OS: Error flashing subscriber unit. Device API Error: 0xE0020090 Address: 0x2000 Command: BIN (0xe0323090); phone connected
I can enter RSD protocol support and Fastboot without problem.
I will appreciate any advice and help!!!!
Hi All,
My auxus nuclea N1 got hung while browsing and it shutdown and now it is DEAD and not powering up. I tried to boot it up to recovery mode which did not work, My device does not even show the charging icon when i plug it to the charger.
I tried to flash different kinds of firmwares using SP Flash Tool, But i keep getting the error "4032" with or without the battery.
I have tried the various combinations such as pressing power only; volume up only, volume down, power+volume up , power+volume down. but still the same error; when I click download / firware upgrade, it shows the 100% in red line and after 35-42 secs gives the error.
I am currently using Win-7, but I have also tried with Win-Xp machine and also a different laptop and different cable with the same result.
I have also tried different version of the sp flash tool.
I have tried the 3 different versions of firmware that the company has provided till date but keep getting the same error.
AuxusNucleaN1_20130703
Auxus_Nuclea_N1_20130824
NucleaN1_20131211
I have attached the screenshots of the sp flash tool process I have followed and also the SP flash log files across multiple runs. Plz let me know how to fix this.
SpFlashTool_Screenshots.docx -- contains the screenshots
SP_FT_Logs.zip -- contains the logs of sp flash tool
The complete error is given below:
---------------------------
Smart Phone Flash Tool
---------------------------
Common Hint: For SP Flash Tool issues:
Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t(Tool Title Hint: Runtime Trace Mode);
3. [Menu]Help-[SubMenu]Open logs folder.
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
---------------------------
OK
I got the same problem to my phone also. What need to do?
we got same problem but im still fixing mine right now
based on my research here is someways to fix it
-Unbrick
https://www.youtube.com/watch?v=0J7gjY3nEuU
-Enable DRAM FAILED
http://forum.xda-developers.com/showthread.php?t=2663680
-unbrick
http://forum.xda-developers.com/showthread.php?t=1943442
-MTK Droid Root & Tools
http://forum.xda-developers.com/showthread.php?t=2160490
-enable_dram_fail
http://forum.xda-developers.com/showpost.php?p=47161578&nocache=1&z=6513086356953772
-LCOLO to GRND
http://forum.xda-developers.com/showthread.php?p=44208574#post44208574
Device is Huawei Ascend y600-u20
It's completely dead, it will only vibrate when holding the power button.
I'm trying to fix it with SPflash tools. but i'm encountering this one error
I can flash Preloader alone without any problem. but when i try flashing everything else or anything else it gives "BROM ERROR: ?? (8)"
Also I Can Format "whole flash", but when i try "whole flash except bootloader" i get this error: "BROM ERROR : S_DL_READ_PT_FAIL (5073)"
I have correct drivers installed, Correct Rom and have tried different versions of spflash tool. Also tried flashing without battery. same thing happened every time
any ideas what i'm doing wrong?
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
etnica- said:
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
Click to expand...
Click to collapse
The process wasn't successful, sorry. From what I understand after a bit of Googling, that error message means the firmware you were trying to flash wasn't compatible with your device. Either that or there was something wrong in the settings.
I found this on https://forum.hovatek.com/thread-439.html:
Error OXFC0
Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html
Delete the sp flash tool folder then re-extract
Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
Consider using the latest version of Sp Flash tool
Format the phone before trying to flash the file(s) again
Click to expand...
Click to collapse
I did exactly what you said. I tried 3 different firmware with no luck. What can I do?
hello and many thinks for ur work
i have this message when i tri to flash my blackview s8
Error: 0xC0050003
Message: BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)
i try partition flashing one by one all work but There was an interruption during writing system.img partitions
Repeat flashing with the latest version of SP Flash Tool
Try using a different Port, USB cord and PC testing my drive but same probleme
now when i conect baterie i have logo blackview and friz
and dont have recovery mode
help plz