Related
[ISSUE HAS BEEN SOLVED! - Download and use "ROOT Genius" to root this particular brand of tablet. I have personally tested it and can confirm it works on Firmware revisions: v1.0.07 and v1.0.9! Thanks to "brugos" for finding the fix and bringing it to my attention!]
Hey guys
I do hope I have posted this question in the correct forum, if not I do apologise.
As you can probably tell from the title, I am looking for a way to root my 9.7 inch Prestigio MultiPad 4 Quantum 9.7 tablet (Model: PMP5297C_QUAD).
I have been looking for a way to root this since December, and even though I have found several articles (non English) explaining how to root this device (and have been through all the relevant threads I could find regarding my device on XDA), all of the guides have been for firmware v1.0.3 - my tablet is v1.0.7. I went ahead and tried it anyway, and although CWM installed and launched fine, installing the SuperSU binary via CWM did nothing. It installs, but nothing appears in Android when I reboot, and installing SuperSU from Play Store alerts me that the SuperSU binaries are not installed.
I tried "Kingo Android ROOT" and that wouldn't even detect the device, which isn't surprising as it isn't listed on their website. However somebody on a similar thread (on XDA) suggested that the OP (who has the same tablet as myself) at least try it. I did try it, and sadly it doesn't work.
Device information:
Prestigio MultiPad 4 Quantum 9.7" Tablet
Model Number: PMP5297C_QUAD
Firmware: v1.0.7 (December 2013)
FW Build Number: PMP5297C_QUAD_20131204_V1.0.7
Android Version: 4.2.2
If there is anybody out there who has any idea what to try, then I am willing to listen. If anybody needs any other information, I am more than willing to give it
Cheers guys
Prestigio multipad 4 quantum 9.7
The same here..trying to find a way to root for the new firmware...still haven't got anything...
Yeah... doesn't seem to be a very popular brand of tablet :/ Which is a shame as its pretty damn snappy with the v1.0.7 firmware. I wanna get a resolution changer to work, but none I have tried will work without rooting. Only wanna drop the res for better gaming framerates lol
yeah agree...doesn't seem very popular... I guess we should wait some time more.... did you try rooting with the old firmware and then updating to the new firmware? I guess it wouldn't work anyway....
Nope... from past experience rooting phones updating the firmware breaks the root as v1.0.7 replaced the entire OS if I remember...
Tried the root for v1.0.3 while using v1.0.7... ClockWorkMod installed and works fine, but the SuperSU binary doesn't work/install It was a gamble incase it screwed anything up but luckily it didn't - however, it also didn't work
And yeah, looks like we will need to wait a while longer... I do hope someone out there somewhere knows what to do lol Just gotta find them or wait for them to find us lol
Hey dude...you still haven't find root? If not try with root genious... I got root now on my tablet...running the latest firmware 1.0.9
Regards!
Ah man! You are AMAZING! lol
I almost gave up trying to find a root - until now!
I had no idea that there was a new FW released a few weeks back, just updated it and downloaded "ROOT Genius" - worked first time!
Excellent work there dude, thank you so much and thank you for taking the time to share it with me, and the rest of the people out there who have been in the same situation as us who are still looking for a fix!
Now we have it! Excellent work!
You welcome!
Just curious what are you going to do to your tablet having root now?
Do you know if there is any posibility to install any rom or something like that?
Also knowing Prestigio I guess would be hard to find some updates hmmm
Hey man
Well the main reason I wanted to root first of all was to adjust the resolution of the display, it has a beautiful high resolution display as you know but some games... the FPS leave a lot to be desired. After doing some reading, some posts suggested lowering the display resolution to increase FPS - and the only way to do that was to root the device.
I did try one app, but it went a bit wrong lol. I was hoping it would readjust the resolution and resize the interface accordingly... instead it ended up changing the resolution, but the interface stayed MASSIVE. The device was inoperable and keep getting a "UI Error" constantly popping up making it unusable at all lol. Had to reflash and re-root so I am looking for another option
Beyond that, I have used custom ROMs in the past on my Android phones, but as far as I know, I believe there is only one ROM out there for our tablet and its based on CyanogenMOD I think... I may be wrong, but I thought I read something somewhere about it. Apart from that though, I am not really sure what else I will do now it is rooted Will open the door to some other apps for certain, but the OS itself seems fine and since the new firmware (v1.0.9) - it feels even faster than before!
What do you have in mind?
Yeah I noticed the issue of FPS in some games.... Well I didn't do many things yet I instaled Xposed and some modules.... and also I removed the navingation bar...is just that I dont like the way the navigation bar and status bar are together... thats why I was searching for another rom also which could have not the Ice cream sandwich bar.
I've found this: crewrktablets.arctablet.com where there are some roms with kit kat that may be work for our tablet but nothing confirmed yet...so I'm not sure if I'm gonna try it
and yeah with the new firmware is much faster thats cool.... but I'm almost sure will be forever in 4.2.2
It worked with MULTIPAD 4 QUANTUM 10.1PMP5101C-QUAD with last firmware too.
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
DyXen said:
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
Click to expand...
Click to collapse
Same problem. I can't get working driver for windows 10. Is it even posssible to upgrade my firmware on win 10? And btw DyXen there is already version 1.0.9 , maybe try that one. http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip
Tnx for this update
but its also useless cuz first i need to install drivers :S
DyXen said:
Tnx for this update
but its also useless cuz first i need to install drivers :S
Click to expand...
Click to collapse
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
yoyo97 said:
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
Click to expand...
Click to collapse
Ok, i tried those drivers too but no success. I think maybe i need other OS.
I have developers options ON and USB debugging turned ON. (I think that should be turned ON)
P.S. I changed to mass storage and program did recognize the tablet but when i clciked switch (tablet turned OFF) and then it did not recognize anymore - i think problems with drivers.
Update to 1.0.9
Hello again,
I finally made it
Here is the thing:
1) Download this update (1.0.9): http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip from @yoyo97 (thanks)
2) Dont use drivers in folder /Drivers_x32 or /Drivers_x64
Instead go to /tools/Driver (and use this one x86 or x64 - depends on your OS)
3) Follow instructions in manual:
start RKBatchTool.exe and if icon is not green click Switch. Wait for tablet to shutdown and you should get green icon. (if this doesnt help turn off your tablet manualy and press AND hold volume + button for about 6-7 seconds DONT release and plug in USB cable then you should get notification on windows and green icon in RKBatchTool.exe)
4) Choose the firmware image and click upgrade.
5) let the software do the trick
6) profit
7) for rooting i used an android app called kingo root https://www.kingoapp.com/ just download the app on tablet. When you start it just click root and let the app do the trick.
After around 2-4min your tablet should be rooted.
I was using windows 7 (x86)
If you need any information please let me know and I will be glad to help
Have a nice day,
DyXen
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
hyderaly said:
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
Click to expand...
Click to collapse
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Please help
kompjuterija said:
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Click to expand...
Click to collapse
Could you solve it? Cause I have the same problem
Hello,
I have a Samsung Note Tab 8, China version so it does not have Download Mode so I may be able to root it and install a custom ROM neither can upgrade the Android version to a later Android version. As far as I explore, the tablet has a Fast Boot mode where I can send commands via CMD from Windows 8. Tried to flash a ROM using ADB, but CMD says there is no device attached to the laptop. I am very stuck, and the tablet entered in LOOP when you boot it. Also the tablet has a Factory menu but is in Chinese and I do not understand a thing from that menu. As stated, Android version was 4.2.9 and the tablet model GT-N5100 according to About section of the tablet.
Is there any way I can make it work again ?
PS: All this started when I saw that the Android shown that out from 16 GB of storage, I was able to use only 4, and after I installed 4 or 5 applications the OS told me that I do have insufficient storage to install another app.
Regards,
Cosmin
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Install windows 10
Install Android 4.4.4 (Stock & RemixOS)
I received the magnificent AllDoCube i6 Air 3G last week, and i've been struggling since to get updates,
firmware flashing and all of that working, I searched the whole web and the drivers/Firmwares are nowhere to find,
but on some chinese proxy-needed sites sometimes, or baidu which is a pain in the a** to download from.
So I decided to share the ways to update this tablet at all costs (heh, no worries, -NORMALLY- it wont brick)
Disclamer: This process might contain ROM hacking, this is for advanced users.
THIS TUTORIAL HAS BEEN TESTED ON i632GB1537XXXXXXX MODEL, AND WORKS ON IT,
WHEREAS IT HAS BEEN REPORTED THAT i632GB1522XXXXXXX MODEL BRICKED UPON DOING IT,
SO PLASE DO IT CAREFULLY, IF THE INSTALL VERSION IS 202 YOU SHOULD THINK ABOUT IT BEFORE TRIYING AS IT COULD BRICK!
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
Flash Drive (256Mo +)
OTG cable
USB Hub (3 Ports recommended)
EFI BIOS Firmware
DOWNLOAD THE FIRMWARE BEFORE STARTING SO EVERYTHING IS AVAILABLE WHEN YOU DO IT
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
Get on the drive, go to your device folder, select the wanted version inside BIOS folder
What to do :
1.) Start by plugging the usb drive into your computer, and format it to FAT32 using any formatting tool
2.) Now you need to uncompress the downloaded firmware :
you will find a "Firmware_X.X.X" folder inside, take all of its content, and extract it to your freshly formatted drive.
here's what looks like the root of your usb:
3.) Your USB Drive is ready, now just plug the OTG cable to your tablet, plug your HUB onto that OTG
and fill it with your keyboard and the USB Drive just created.
4.) Press power button until you see the screen backlight, when you see it repeatidely smash "Esc" key on the connected keyboard.
You will see the bios 6 square configuration screen.
Hit "Boot Manager" and select your USB in the list.
5.) The tablet should now boot from your USB, booting to a UEFI Shell. Depending on your device, it might be either 64 or IA32.
Now you just let startup.nsh script do the firmware flashing init, it should drive you to a flashing BIOS screen.
6.) Follow instructions on screen and let the tool flash your BIOS automatically.
Once done, the tablet will shut down.
Congrats! You successfully updated your BIOS !
It is my first tutorial, i will post some photos of steps in the future so come back, the guide will be better soon !
Regards,
Max.
Hi,
I have bought the Cube i6 Air 3G a week ago and i'm still waiting for it to arrive.
Have you update the win 8.1 to win 10?
Does everything works correctly?
Regards
re
Hi, I successfully updated the BIOS as of now,
I changed the bootloader animation to nexus one on Cube ROM.
I also manager to boot on Android x86 but it had too many drivers issues.
Still, 4.4.4 stock cube is working and i reflashed to a new partition scheme of 9Go
and i'm currently testing some win10 pen drives for install, will keep you updated.
Édit: oh you were asking about thé tablet? Weil jack has default, charging takes hours, glass is plastic, firmware is pain but hell this is a goodamn good tablet for its price !
regards,
Max
stalker2106 said:
i'm currently testing some win10 pen drives for install, will keep you updated.
Click to expand...
Click to collapse
I achieved installing Win10 x32 Pro on Cube i6 Through hacking WinPE installation environnement, but now i'm struggling finding the drivers. touchscreen, battery and vital things like hd graphics are not working as of now. Will post a tutorial on how to install Win10 in given time when i'll get out of this mess!
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
gtbr said:
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
Click to expand...
Click to collapse
I did not try anything as i like "stock" versions of my windows, but tonight i got it working all the way !
My cube i6 is running perfectly windows 10 and oh my god what a paradise it is ! The tablet experience got way better onto that version.
Can you try to update from the icon you are talking about ? i'd be curious if it works. anyway, i'm currently writing+uploading for the win10
tutorial for this tablet, so you'll be able to flash it late tonight, or tomorrow.
EDIT: The dpi is correct in android, only the status bar icons and some other are not in correct dpi but that is KitKat issue I guess. still interested in resolving that though. I'm currently hacking android lollipop ROM also, i'll keep you tuned on that. For rooting, i used KingRoot, it worked, but after a reboot, it tells me "root" is wrecked, so i guess there is some investigation to do there, but I was mainly focused on getting windows 10 ENGLISH STOCK version running to share it with you guys.
EDIT2: Still uploading, but tutorial is here: http://forum.xda-developers.com/android/help/guide-how-to-install-windows-10-t3252042 and it should work on any Z37xx powered device. Enjoy !
Hello,
I'm using this tablet from 2 days now. great !
But, i got wifi problem after sleep : wifi chip cut and never found network anymore.
has to reboot, and all goes right.
same in win and android.
Did you hear about this ? many poeple complain about this.
Any trick or advice ? Is this bios correct this ? Is your bios work on i6 3g dual-boot ? (there is 2 bios for dual boot ?...)
Thanks !
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
gtbr said:
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
Click to expand...
Click to collapse
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
tysonpower said:
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
Click to expand...
Click to collapse
Check windows 10 Post, there is no need to update BIOS to fix this error, your USB has to be in GPT partition style, check answer on the other thread
But usually the bios update should work, as it did on my tablet. But why bother taking risk if you can get it working without it
Hi,
I have sucessfully updated to win10
I have bios 203 in my cube and serial i632gb1510xxxxxxxxxxx, does anybody have tried to update to 206 on such setup ?
What are the chances that I will brick my device ?
I have downloaded latest Cube i6 roms from cube site (may 2015) . There are two bios-es which have to be installed in chronological order.
Shall I do it first, and then try to update to 206 ?
Edit: I was not patient and tried it on my own.I have successfully updated bios and tablet has started to both android and windows
I will perform some functional tests afterwards.
Actual steps :
I have first downgraded bios to 201(provided here )
Flashed bios1 from link provided
Flashed bios2 from link provided
Flashed bios 206 from guide in first post
Edit2:
I have tested basic functionalities like : Gyro-sensors, WIFI, GPS, 3G network and yet everything works like charm.
Maybe a placebo, however I have the feel that android runs like two times faster
I do suggest to update the windows, however I take no responsibility if you will brick your device. Even if the setup is like mine, neither if it differs
Regards
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Many thanks and question
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
jan-netherlands said:
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
Click to expand...
Click to collapse
The truth is, the 206 BIOS provided is hacked off i6 remix repository from cube, so i guess there is no big deal flashing it on your device as it works on regular i6.
Moreover, you can use any version of the flash tool as long as you flash a correct rom for your device, which i would suggest to download from official cube repository or geekbuying or so.
Android Geecbuying
Hello Stalker,
Ok. Thank you!
I will try Geecbuying.
Hopefully the windows drivers will function.
There isn't a way to flash from USB I suppose?
Greetings
Hi, well, actually, you should flash over USB with à windows computer. MFT by Intel is recommended. I shall make some tutorial about Android installation and partition resizing.
flash and resize partitions
That is super. When you want to do so.
I was indeed wondering or there would be one android partition on the tablet or two partitions (one for android, one for windows).
I also questioned myself how to see that there are partitions.
In earlier times when I was working with a pc, i use F-disk or partition-magic for this kind of work.
But on the tablet I do not have a clue...
So if you could make me wiser on this, I would be very thankful.
Maybe you could boot on some gparted liveusb? Or inside efi shell some commands could help
bluefish007 said:
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Click to expand...
Click to collapse
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
thermoska said:
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
Click to expand...
Click to collapse
Ok thanks for the answer! So i can upgrade from 203 at 206 at one part or what do you think?
Hi!
I have a Samsung Galaxy S5 that appears to be rooted with Team Win Recovery Project (TWRP). There is no software on the phone. I'm trying to get it to run Windows 8 or 10 through an emulator on the Android OS. Doe anyone know how I can go about doing this? I've tried using Odin3, but it keeps failing. The IMEI has been removed, so there's no carrier info. If there's an easier way to get Windows 8 or 10 onto this phone without going through an emulator on Android, please help.
Thanks!
conface said:
Hi!
I have a Samsung Galaxy S5 that appears to be rooted with Team Win Recovery Project (TWRP). There is no software on the phone. I'm trying to get it to run Windows 8 or 10 through an emulator on the Android OS. Doe anyone know how I can go about doing this? I've tried using Odin3, but it keeps failing. The IMEI has been removed, so there's no carrier info. If there's an easier way to get Windows 8 or 10 onto this phone without going through an emulator on Android, please help.
Thanks!
Click to expand...
Click to collapse
There is no possibility to get Windows on an Android Device, the only two options you have to get the Device working again is 1. A Custom ROM like LineageOS or 2. You flash the latest Stock ROM via Odin
Hello there!
I am running BLA-AL00 10.0.0.180(C00E181R1P4patch01).
Recently I wanted to downgrade to EMUI 9 to unlock the bootloader (I have the code) and here are my failed attempts:
1.Downgrade via dload with OTG
2.Use HiSuite 'System Repair', which popped up with 'No available fix for your device' (btw actually I managed to use this method before, but Huawei seems to block this)
3.Cheat HiSuite to downgrade with Firmware Finder's DNS update (see: link, ended up with ‘failed to install‘, I think this didn't passed verification)
So...are there any other possible ways to downgrade? Thanks a lot!
Zerlight said:
Hello there!
I am running BLA-AL00 10.0.0.180(C00E181R1P4patch01).
Recently I wanted to downgrade to EMUI 9 to unlock the bootloader (I have the code) and here are my failed attempts:
1.Downgrade via dload with OTG
2.Use HiSuite 'System Repair', which popped up with 'No available fix for your device' (btw actually I managed to use this method before, but Huawei seems to block this)
3.Cheat HiSuite to downgrade with Firmware Finder's DNS update (see: link, ended up with ‘failed to install‘, I think this didn't passed verification)
So...are there any other possible ways to downgrade? Thanks a lot!
Click to expand...
Click to collapse
You don't need to "cheat" hisuite. Just launch hisuite, connect your phone via usb cable, and click on update button. Hisuite will scan for updates and there should be a tab saying previous versions. Just click on it and you should be able to downgrade. Using the dload method and "cheating" hisuite is a great example on how to brick your phone as thats how I managed to brick my huawei(still trying to unbrick). Also what Hisuite "System repair". I only know system recovery or are you referring to that?
WayneSeng said:
You don't need to "cheat" hisuite. Just launch hisuite, connect your phone via usb cable, and click on update button. Hisuite will scan for updates and there should be a tab saying previous versions. Just click on it and you should be able to downgrade. Using the dload method and "cheating" hisuite is a great example on how to brick your phone as thats how I managed to brick my huawei(still trying to unbrick). Also what Hisuite "System repair". I only know system recovery or are you referring to that?
Click to expand...
Click to collapse
Yes, I managed to downgrade via the normal method...
I thought it won't be OK to use this way... because I previously found the 'previous version' tab gone...(about one year ago)
And yes, I mean system recovery. My HiSuite is in Chinese so I just give it a direct translation lol.
Also I often use eRecovery to unbrick, maybe try it out? (I don't know whether international versions have this function or not...)
Problem solved! Thanks a lot!
Now my phone is running Lineage 18! Feeling great!
Can you please explain how did you do that ? I want to get rid of this emui
Zerlight said:
Problem solved! Thanks a lot!
Now my phone is running Lineage 18! Feeling great!
Click to expand...
Click to collapse
Can you please explain how did you do that ? I want to get rid of this emui
Mine one is bricked. How do i downgrade or unbrick? Currently using the latest emui 10.0.0.181. Entering hi suite asking me to enable the hdb but my phone is hang on the boot logo. How can i do that?
madknownz said:
Mine one is bricked. How do i downgrade or unbrick? Currently using the latest emui 10.0.0.181. Entering hi suite asking me to enable the hdb but my phone is hang on the boot logo. How can i do that?
Click to expand...
Click to collapse
try to enter to eRecovery and restore your last firmware,, connect your phone with usb cable even in charger then connect to eRecovery, maybe this method working
misiozol said:
Can you please explain how did you do that ? I want to get rid of this emui
Click to expand...
Click to collapse
I got the lineage GSI rom from my friend, I actually doesn't know it's source, seems phh-treble.
NFC doesn't work, and this rom also has a potential storage problem. (actually I don't know whether it is caused by me or not) Just a week ago the rom broke my data partition and I have to reset. Now I have returned to EMUI. The rom is vanilla, and device model doesn't show probably. GAPPS can be installed via TWRP but device model, I tried, can't be modified without Magisk. The rom contains su as well.
If you truly want it, I can upload it to Gdrive. Now I want to downgrade to EMUI 8 and then I can use Openkirin roms, or search for another fit rom.