Help to unbricked the tv box a95x f3 air (amlogic s905x3) - Android Stick & Console AMLogic based Computers

I received the tvbox with a problem with wifi and bluetooth, I contacted the seller and he sent a firmware for me to fix it, but now the device is not identified on the PC, it does not recognize the PC's USB, after I I did the process, the device does not show any sign of life, because a firmware that was not his was installed, and the device bricked, how can I solve it, can anyone help me?

Related

Lenovo A660 URGENT

Hello I'm new to this scene and I apologize I don't really know what I am doing.
I ordered the A660 from an amazon seller and I could not get the phone to show anything past the Lenovo Logo upon power on. I could get into the android recovery but in the internal memory were only empty folders. I don't yet have a micro SD yet so I proceeded to search the internet for a way to get my phone working. I came across several forums about flashing and what not and proceeded to download and installed MediaTek DA USB VCOM port drivers and smartphone Multi-port download tool [v3.1228.00-A2012.08.03]
I proceeded to try to get the phone to connect to windows so it could be connected. I got a 'dl error' message in super multi-port tool (see pic 1) and am now worried that I bricked my new phone. PLEASE say it ain't so. It still shows up in device manager for a while when I plug it back in but does not charge or bring up the Lenovo branding on the phone anymore. Pic below represents where I am at.
**Update***
Seconds pic shows what sp flash tool says.
your issue is not SW
it is HW
i had same issue, they why the seal the phone in cheep price, as it have HW issue.
if you take the battery and charger with any multiply battery charger, the phone will work.
issue the phone dose nt charge anymore by it self
http://www.youtube.com/watch?v=qPlnlnikQtk
see this video, it is for my mobile

Help with RK29 tab

Hi there, i need help with a tablet that i just got bricked,its a Newsmy, not sure what model cause cant find it anywhere, i tried flashing a firmware for RK2918/30 using a tool called Rockchip Batch Tool but now i dont get anything on the screen and only get a Newpad icon on Windows 7 from inside storage when connecting usb cable, and also i cant switch it off or go back to 'service mode' so Rockchip Batch Tool wont even recognize the device ,any thoughts?? thanks

official update ruined my device, pls help

Hello, i have tablet Acer A1-811 and now its bricked, it seems to be dead but it can be connected to the pc but its only reconnecting (each few seconds it connect usb and than disconnects it). I found some threads here about ressurecting this devices via spflashtool, but it has some error with scatter file in every acer rom. But i even know if it will work due to reconnecting problem. Have pls somebody some experience with this devices? I have flashed some devices in past, everything worked fine, even if there was problem, there was always way to repair it but i never seen to stock rom destroy device this way, i have similar problem in past with samsung galaxy mini when pc update bricked it too bud it was easy to repair it. thank you for your help. merry xmas

Bricked my OTT MXQ PRO 4K S905X

Hello, I recently tried to install custom ROM to my mxq pro, but probably I downloaded wrong rom and I bricked my tv box. It only freezed on startup screen "S905X" and then didnt go from there. After that, I tried to install firmware with USB burning tool method over computer, I downloaded firmware, and did everything as I supposed to do, but I always got error message on 3-4% "–[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error" .. after that, I tried to turn on my mxq pro but now it doesnt even want to turn on, all I get is red led indicator, and nothing more, PC recognize mxq but its always with that red led indicator, what should I do? Does anyone have same problem? Or does anyone have some firmware that should work with my mxq?
my chip is RTL8188 Realtek
same ****
skols155 said:
Hello, I recently tried to install custom ROM to my mxq pro, but probably I downloaded wrong rom and I bricked my tv box. It only freezed on startup screen "S905X" and then didnt go from there. After that, I tried to install firmware with USB burning tool method over computer, I downloaded firmware, and did everything as I supposed to do, but I always got error message on 3-4% "–[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error" .. after that, I tried to turn on my mxq pro but now it doesnt even want to turn on, all I get is red led indicator, and nothing more, PC recognize mxq but its always with that red led indicator, what should I do? Does anyone have same problem? Or does anyone have some firmware that should work with my mxq?
my chip is RTL8188 Realtek
Click to expand...
Click to collapse
some problem

Please help my pc does not recognize my new tv box t95q 9.0 amlogic s905x2

Hello friends, I need help please, my tv box t95q which is one of the new ones in quotes, I installed several firmware to paret of yours that only failed me in wifi and I like them a lot and it turns out that I installed one of tanix x3 and between with the pc and the amlogic application and now the pc does not recognize me, the tv box or the system of installing via sd card does not turn on the blue light anymore and it does not give or image I have seen that there is a method making a small short with the tv Box disassembled but I saw it and it was another tv box and I don't know where I should do it in mine if you know something and can help me please I appreciate it very much
Ho, you would need to use mask rom mode, this will force your box to be detected in USB burntool, this is achieved by shorting 2 pins on the nand flash usally

Categories

Resources