Hi everyone !
I was an mate 10 pro's owner 'till past friday... he fell to the ground and the screen is now broken, it stays black.. unfortunately i did not activate the debugg mode... so now i just can't retrieve my datas to transfer to my new phone (pixel 6 btw..) i searched any solutions but it seems there is none... my computer says a new USB devices has been connected but with error... i can't see the phone on my computer and i can only see MTP device on usb device pannel...
Do you have any solution?
thanks you !
Related
Hi guys
I have a Meizu MX5 that got some sea water in the screen, that's all! Since then the phone charges, it connects, the physical buttons work but the screen doesn't reply to the touch. My problem is, for security reasons i always connected the USB option "charge only" so now how can i recover my data from it?
I can charge the phone when connected to a pc but is there any way to force the device from the pc to allow the access to it?
Hi guys,
My screen recently died. Before fixing it at a specialized shop, I want to retrieve the data from the phone. Sadly the phone is pattern-locked and until I unlock it I can't access the data when I connect it to my PC. The screen is essentially dead. The image is almost totally black except for small layer in left top corner and the touch sensor is unresponsive, but other than that the phone works and receives notifications and so on.
USB Debugging mode isn't active on the phone and thus I can't replicate the screen of the phone on my PC through software alone, when I connect it via micro-USB. I also didn't think of this problem in advance and I'm not registered on Sony's FindMyMobile or any similar apps.
I tried using a HDMI-MHL adapter and I confirmed that the phone is indeed working because I'm able to get the phone screen's image on my TV. The problem is I can't actually interact with the phone because as I said earlier the touch sensor is not working.
The HDMI-MHL adapter I've used also seems to have a micro-USB port but that seems to work for power only. If I connect a USB-OTG cable on it and connect a USB mouse to it I get image but no mouse. If I connect the USB-OTG and the mouse, alone, I get a mouse cursor but I can't see what I'm doing (phone vibrates as I 'try' and draw the unlock-pattern blindly).
So, Sony Xperia Z3 Compact screen is dead, I wanna connect my Xperia to my TV via HDMI AND use a mouse at the same time to control my phone. Is this possible_
I also thought of another option... go to recovery mode and flash a zip that removes lock. I thought of trying step by step (switch keyboard and TV al the time just to get at point where I can find zip file and flash it). Unfortunately in recovery mode the phone does not allow to stream to TV. It only works when phone is after SIM lock.
Two additions: by removing and re-installing ADB on my laptop my phone is unauthorized. Only a matter of clicking on yes/allow on phone but that's not possible and TWRP 3.1.1-0 is installed.
Anyone any clue? I know I ask a lot but I'm searching the internetz for 2 days now and I'm devistated.
THNX a great bunch!!!
ciao
Valentijm
PS Copy/paste a part of the text from a guy from the internet who had exactly the same problem as I did but his thread ended a few months ago without result.
Just 30 minutes after my post I magically had all the dots correct and that blind!!! So turned on USB debugging and got rid of lock pattern. It was a nice three days of my life Guess there was no solution than getting lucky like I did or screen replacement and getting all your data removed.
ciao
Hello,
I am presently facing a strange issue with my Lyf Water 8. Nothing has gone wrong on my phone for almost 2 year but recently, impossible to charge my battery while my phone was on also I am unable to connect my phone through USB. Today, after a few weeks thinking my phone was just dying, I have tried to make a back up and wanted to save all my data on my computer. However, impossible to connect my phone to my computer. Then I realized the problem was probably due to my USB parameters (No interface asking for mode to choose when I plug USB).
I can only use USB while my phone is OFF, meaning I only charge my phone when it is OFF.
I did not find any solution on internet and did not find an option to allow this interface to come back, even by trying to go in "developer options" as it is unable to connect through USB.
I have tried factory resetting my phone but nothing seems to solve my problem.
Could you please help?
Thanks
Omair
Hi! I have an asus zenfone max pro m1 (zb602kl) which the screen is black/blank but working (i can call it). I can put it in different modes like recovery (because the led light stays red which is different when the phone is just on) . When connected to pc via usb, it shows a device named sdm636-qrd and does not mount the drives.
Is this a hardware or software problem? Can anyone kindly give me idea what is wrong with this phone.
Thanks in advance.
Hi all,
Possibly a broken record but haven't read anything that helps. Friend has a S8 with a completely shattered screen. It has power. I need to enable USB Debugging but not working out. All of the solutions I'm finding seem to presume you can see on the screen just not interact with it. Re: ADB, I'm sure using the volume rockers and buttons might work, but without being able to see what's on the screen, I'm pushing buttons blindly.
I tried Kies but it's stuck in "Connecting" and never connects. I've tried multiple USB ports, cables and even 3 dif machines. No go. All 3 machines (Win 10 x 2 and a Win 7) can identify the device and connect, but without USB Debug enabled, it's pointless. I've tried screen mirroring software to put the S8 screen on my PC but I've had no success getting that to work.
The screen does have a code and I've got a USB-to-USB C adapter so I should be fine with connecting a USB keyboard to the phone to unlock it, but again, without being able to see the screen, I'm shooting in the dark.
Any assistance is appreciated.