Related
Hello,
I bought recently the new SGS3 and after a week or two of using I noticed the phone loses all the sounds despite all of them are turned on and not being on minimum. After a while the sounds get back and everything works fine. At first I thought it might be from the settings because I set up silent mode for all notifications and I thought it may turn all the sounds off, despite it normally shouldn't. After playing for a while with the phone I realized the issue appears randomly without any reasons while I was playing game or simply navigating through the phone. If anyone had experienced the same issue or have an idea what could be the problem (software, hardware, settings, OS, etc) or how it can be solved, please respond. Any answer is appreciated as the problem is quite annoying as I'm missing calls because of it.
Thank you.
Phone details:
Samsung Galaxy S III
Android version - 4.0.4
Baseband version - I9300BOLF1
Kernel version - 3.0.15-782020
Build number - IMM76D.I9300XXBLFB
P.S. Restart of the phone doesn't help as I already tried it. The issues is related to all the sounds not to the vibration, the last works fine.
Backup data and factory reset.
Sent from my GT-I9300 using xda premium
JJEgan said:
Backup data and factory reset.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thank you for your advise JJEgan, unfortunately it didn't help neither. Yesterday I did the factory reset and left it as it is, didn't restore any of my previous settings or apps, didn't install anything additional, just wanted to see if the problem will appear again, and unfortunately it did.
Anything else I can try or I should take it to a service?
Thank you
I have the same problem with notification sounds. The problem appears when i turn off notifications on apk like im+ or Yahoo messenger. Is there any other solution rather than factory rest?
Sent from my GT-I9300
mausxda said:
I have the same problem with notification sounds. The problem appears when i turn off notifications on apk like im+ or Yahoo messenger. Is there any other solution rather than factory rest?
Sent from my GT-I9300
Click to expand...
Click to collapse
maybe there is some loose..should send back to samsung
It happened to last night. I restored the phone using CWM and now is back to normal.
Hello everyone,
I have two Xperia U's, both running ICS with the latest official update (.54). I have both phones set identically, with the exact same settings and apps on both. The problem is that while I have Dial Pad Touch Tones, Touch Sounds, Screen Lock Sound and Vibrate on Touch activated on both phones, they work on only one of them. I did a factory data reset twice on the affected phone, but they stop working as soon as backup and restore runs for the first time. Is there a way to resolve this?
TIA,
Shady
sjanzeir said:
Hello everyone,
I have two Xperia U's, both running ICS with the latest official update (.54). I have both phones set identically, with the exact same settings and apps on both. The problem is that while I have Dial Pad Touch Tones, Touch Sounds, Screen Lock Sound and Vibrate on Touch activated on both phones, they work on only one of them. I did a factory data reset twice on the affected phone, but they stop working as soon as backup and restore runs for the first time. Is there a way to resolve this?
TIA,
Shady
Click to expand...
Click to collapse
Don't do restore :silly:
Try to clear data for settings in apps and enter settings manually, or make new backup excluding settings and restore that.
Hello
My Galaxy s3 is keep restarting after every 5 6 minutes. I flashed stockrom
4.3 didn't worked for me same issue. I changed the country version for stockrom still same issue please help me out in that.
Thanks
Sent from my SM-G900I using XDA Free mobile app
mohsin1230 said:
Hello
My Galaxy s3 is keep restarting after every 5 6 minutes. I flashed stockrom
4.3 didn't worked for me same issue. I changed the country version for stockrom still same issue please help me out in that.
Thanks
Sent from my SM-G900I using XDA Free mobile app
Click to expand...
Click to collapse
Have u cleared the Dalvik Cache, Cache partition and also All the data i.e. factory reset
Yes i cleared all but no success even did that couple of times
mohsin1230 said:
Hello
My Galaxy s3 is keep restarting after every 5 6 minutes. I flashed stockrom
4.3 didn't worked for me same issue. I changed the country version for stockrom still same issue please help me out in that.
Thanks
Sent from my SM-G900I using XDA Free mobile app
Click to expand...
Click to collapse
ohh, try downloading stock firmware again from sammobile without any pause and flash
Yes I did
It keep restarting sometime after 5 min sometime after 10 15 minutes
mohsin1230 said:
It keep restarting sometime after 5 min sometime after 10 15 minutes
Click to expand...
Click to collapse
Sounds like a hardware problem if flashing stock and factory resetting doesn't solve it.
My power button had a problem that causes the phone to reboot infinitelly sometimes, it gets stuck inside even if I can still press it.
Well, pressing it a couple times normally works for me. But to be sure I stopped using it, double tap status bar to screen off and home button to screen on.
It's really bad when it stucks...
No its not a sort of that problem coz I already checked that, but now I think I am able to get this problem solved but now no sim card is working its keeps displaying Emergency calls only..
mohsin1230 said:
No its not a sort of that problem coz I already checked that, but now I think I am able to get this problem solved but now no sim card is working its keeps displaying Emergency calls only..
Click to expand...
Click to collapse
Have you checked if your IMEI and serial number are intact?
No how to check?
mohsin1230 said:
No how to check?
Click to expand...
Click to collapse
Go to about phone, status and check they match what is on the box or under the battery on the sticker.
Yes just checked its same. Now the set is again restarting but the time increased even if I switched off the phone it will turned on itself, is it like a hardware problem? I tried different versions of firmwares. Also few days back mother boards EMMC chip get repaired , is this belongs to that issue?
It can be a hardware problem
One more thing I noticed. I switched off the phone after few time it automatically switched on
Your power button is faulty.
hi, i have the same pb? i checked the power button is ok, i try a lot of rom (official & custom) no solution?
Nand memory is damaged, go read the the emmc freezing thread.
Is this hardware issue?
Hello all as the title implies, I would like to ask if you are experiencing too this issue and if there is any solution. For me it is quit important as I can’t have all apps compatible for split view because the “force activities to be resizable” setting inside developer options requires restarting the device to work but here is the problem with Mate 10,if I restart the device all the developer options are reset, so I am stucked with this particular option.
SAVVAS. said:
Hello all as the title implies, I would like to ask if you are experiencing too this issue and if there is any solution. For me it is quit important as I can’t have all apps compatible for split view because the “force activities to be resizable” setting inside developer options requires restarting the device to work but here is the problem with Mate 10,if I restart the device all the developer options are reset, so I am stucked with this particular option.
Click to expand...
Click to collapse
I believe all phones do this, not just the Mate 10.
tboy2000 said:
I believe all phones do this, not just the Mate 10.
Click to expand...
Click to collapse
Hello , no it is not. To force all apps to be resizable so that can all work in Split View you need to enable the option in Developer mode and then restart the phone to be activated. So the statement you made is not logical because that option can’t be enabled as after restarting all the options get reset on Mate 10 so it is a dead end. I have tested this on Oneplu 3 ,3T, Note 5 , S7 Edge and Nexus 5X and I had no problem at all.
Oneplus and Nexus are even on Android 8.0 like Mate 10.
This is very serious for me because you can’t have all apps compatible with split view like the other phones I had and I want this for work monitoring purposes ...
SAVVAS. said:
Hello all as the title implies, I would like to ask if you are experiencing too this issue and if there is any solution. For me it is quit important as I can’t have all apps compatible for split view because the “force activities to be resizable” setting inside developer options requires restarting the device to work but here is the problem with Mate 10,if I restart the device all the developer options are reset, so I am stucked with this particular option.
Click to expand...
Click to collapse
What is your firmware version,
On 103 it reverted every restart,
But it fixed on .115 onwards
BLA29 432 115 FW Mate 10 Pro and it doesn't reset.
otonieru said:
What is your firmware version,
On 103 it reverted every restart,
But it fixed on .115 onwards
Click to expand...
Click to collapse
Mate 10 ALP-L29 8.0.0.119 (C636)
yes the phone is reset after it restarts. specially noticed this after changing the dpi
I have the same problem with my Mate 9. Developer Options do not stick, but, there is a partial solution. Some of the options there have actual system, global or security variables associated with them. For instance I use tasker to switch on and off the "Mobile data always active" setting by running a shell command as "settings put global mobile_data_always_on 0/1" as needed. If you have adb installed, you can run the list command for each variable set, before and after toggling a setting, so you can later compare the result and figure out which variable you need to set. More info here: http://forum.joaoapps.com/index.php...ings-to-use-in-autotools-secure-settings.210/ Please note, the use of AutoTools is not necessary as a simple shell task would suffice in most cases
With mine, if you turn developer options off, you are still able to change dpi even though developer options are off, if you reset when it's like that, it resets itself. If you turn them on and make the changes again and restart it will stick.
Same Problem with the Huawei P10 with VTR-09 8.0.0.371(C432) (unrooted with TWRP). DPI is reset after every restart. If there is any solution, please tell me, I hate it to use a mobile wich looks like the one from my grandma with that big font size etc.
[EDIT]
Before the previously update it works fine btw.
Hi to all this is my first day with Samsung Galaxy s9 plus and I'm having problem with Fingerprint sensor... After restart works for 5 to 10 times... After that stop working and a message appears that "Fingerprint sensor stop working) and need reboot to work again for some times and the same...
I haven't done a factory reset yet because I have just finish set up
Is there anyone with same problem in s9, s9+, or s8, NOTE 8 series?
i didnt have any problems with mine and dont have the problem with my s8 neither
No Issues at all.
I've been using mine since morning without any issue. Try a factory reset
Working fine here
Same issue with me here , My device is S9 plus 256 GB version , work for 10 or 20 mins and after that it stop response at all unfortunately
Sent from my SM-G965F using Tapatalk
That's weird I'd replace it, I have the device since the 7th, no fps error
skivnit said:
That's weird I'd replace it, I have the device since the 7th, no fps error
Click to expand...
Click to collapse
Yes , if the problem remain with no update from samsung side , I will ask for replacement for sure , especially the device is new and there is no sufficient reviews of the device to see of this problem is common of just single cases ..
Sent from my SM-G965F using Tapatalk
Try a factory reset.
Facebook was keeping logging me out and issue resolved by a factory reset
Sent from my SM-G965F using Tapatalk
M.Noury said:
Try a factory reset.
Facebook was keeping logging me out and issue resolved by a factory reset
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
But if I did that , I will lose all my data and I will be have to transfer it again , right
Sent from my SM-G965F using Tapatalk
bablo86 said:
But if I did that , I will lose all my data and I will be have to transfer it again , right
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Yes you will loose all your data...
Here in Europe Exynos version in a Greek mobile forum we are 3 people with the same Fingerprint problem... So this must be firmware bug and not hardware...
Try this and see how it going...
Go to Fingerprint settings, desable Fingerprint gestures, delete all Fingerprints, restart phone, go again to Fingerprint settings, put 4 Fingerprints (I put 2 times the same finger for left and right hand), check if works, restart phone, go to dialer and call "*#0*#" service menu, go to sensors, Fingerprint and click on normal, when finish (all "pass") go back, restart phone and check if everything is OK.... There's be 1,5 day without having any problems
Any one still facing the issue after disabling fingerprint gesture?
tsiglas said:
Yes you will loose all your data...
Here in Europe Exynos version in a Greek mobile forum we are 3 people with the same Fingerprint problem... So this must be firmware bug and not hardware...
Try this and see how it going...
Go to Fingerprint settings, desable Fingerprint gestures, delete all Fingerprints, restart phone, go again to Fingerprint settings, put 4 Fingerprints (I put 2 times the same finger for left and right hand), check if works, restart phone, go to dialer and call "*#0*#" service menu, go to sensors, Fingerprint and click on normal, when finish (all "pass") go back, restart phone and check if everything is OK.... There's be 1,5 day without having any problems
Click to expand...
Click to collapse
4ο άτομο από Ελλάδα με το ίδιο θέμα
Hope it works tho
Edit: It works for now
I am from dubai using 128 exynos version. Having the same problem with fingerprint sensor.
South Africa, 128gb same problem
România...the same problem
Trimis de pe al meu SM-G965F folosind Tapatalk
hi
Same problem here in france with exynos 64go one
galaxy s9 problem with fingerprint reader
Hi,
I also have a problem with the reader. What time does it stop working. resetting the factory settings does not help. You will have to go to the Samsung service
robeeerto said:
Hi,
I also have a problem with the reader. What time does it stop working. resetting the factory settings does not help. You will have to go to the Samsung service
Click to expand...
Click to collapse
I think its more of software related issue and needs an update. For the moment, just disable the fingerprint gesture it should work fine.
I confirm that. I had the issue yesterday, have disabled finger print gestures and everything's fine so far...
farhanzs said:
I think its more of software related issue and needs an update. For the moment, just disable the fingerprint gesture it should work fine.
Click to expand...
Click to collapse
hi, there's a dual sim sgs version of 9, 64 GB. the reader works as he wants. it works a few times and in a moment it stops working. over and over again. I restored the factory settings and it started working but after two hours it stopped working again. Updates are currently being made.