Hey folks!
I recently picked up one of these from t-mobile and it's a bit sluggish with everything stock. It's been a while since I've been in the rooting and flashing scene, but I can't seem to find any method that works with the cellular version model number T227U. Can anyone point me in the right direction please?
Thank you kindly
Did you find a way too root t227u?
WhiteFox31282 said:
Did you find a way too root t227u?
Click to expand...
Click to collapse
Unfortunately no, not yet.
CTXCI said:
Hey folks!
I recently picked up one of these from t-mobile and it's a bit sluggish with everything stock. It's been a while since I've been in the rooting and flashing scene, but I can't seem to find any method that works with the cellular version model number T227U. Can anyone point me in the right direction please?
Thank you kindly
Click to expand...
Click to collapse
Hi there,
You can try the below method as I have successfully rooted my Tab A7 Lite T225N (T225NKOU1AVE1). Disclaimer: It is at your own risk and I am not liable for any damages to your Tab.
1. Download your T227 firmware from samfw or other source
2. On PC, copy the stock AP...tar file into the Tab.
3. On Tab, install Magisk to patch the AP...tar and then copy magisk_patched.img onto the PC.
4. On PC, use the 7zip > tar to archive this magisk_patched.img to magisk_patched.img.tar file.
5. On PC, in Odin > AP, select this magisk_patched.img.tar file and proceed to flash it to the Tab.
Note: Make sure Tab is in 'Download mode' before flashing the magisk_patched.img.tar file.
Upon successful flashing, your Tab will be rooted. You can verify your Tab if it is rooted by installing Magisk, follows by the Root Explorer app and then use the Root Explorer to enable 'R/W' mode for /system folder.
Hope this helps.
XtremeX said:
Hi there,
You can try the below method as I have successfully rooted my Tab A7 Lite T225N (T225NKOU1AVE1). Disclaimer: It is at your own risk and I am not liable for any damages to your Tab.
1. Download your T227 firmware from samfw or other source
2. On PC, copy the stock AP...tar file into the Tab.
3. On Tab, install Magisk to patch the AP...tar and then copy magisk_patched.img onto the PC.
4. On PC, use the 7zip > tar to archive this magisk_patched.img to magisk_patched.img.tar file.
5. On PC, in Odin > AP, select this magisk_patched.img.tar file and proceed to flash it to the Tab.
Note: Make sure Tab is in 'Download mode' before flashing the magisk_patched.img.tar file.
Upon successful flashing, your Tab will be rooted. You can verify your Tab if it is rooted by installing Magisk, follows by the Root Explorer app and then use the Root Explorer to enable 'R/W' mode for /system folder.
Hope this helps.
Click to expand...
Click to collapse
This seems to be for the 225 not the 227
DieATribe said:
This seems to be for the 225 not the 227
Click to expand...
Click to collapse
It works for T227 as well. You just need to download your own firmware file
CTXCI said:
Hey folks!
I recently picked up one of these from t-mobile and it's a bit sluggish with everything stock. It's been a while since I've been in the rooting and flashing scene, but I can't seem to find any method that works with the cellular version model number T227U. Can anyone point me in the right direction please?
Thank you kindly
Click to expand...
Click to collapse
Hello, I just picked up a used t-mobile T227u. Can you confirm what the most current T-mobile software version is?
Thank you.
Related
Hi guys, I am new to Android and just got my GT 10.1, 3G+Wifi version. I done a few readings online and I really feel that rooting is way better to use the tab compared to non-rooted android devices. I would like to make sure of the steps before I start rooting and overclock it. If I have write or describe something wrong, I will appreciate it if you are able to guide me
So now my GT’s stock ROM is the original Honeycomb 3.1, without TouchWiz. I would like to root it first of all [Sorry I copy & paste, thanks original author!]
“How To: Root Samsung Galaxy Tab 10.1 [Easy Way]
Step1: Download the Zip file Here
Step2: From adb, run the following command (without quotes) “adb push allidoiswin.zip /sdcard/allidoiswin.zip”
Step3: Now punch in “adb reboot recovery”
Step4: Now simply flash the Zip file which you put via Adb, that’s it after running zip file your Samsung Galaxy Tab 10.1 will be fully rooted now get superuser access.”
[It’s that easy right? Not the older long steps that I have to do with nvflash ADX Mode or such?]
After I have rooted my tab. I guess it is best to backup my stock ROM beforehand?
Step 1: Download and install free ROM Manager app from the Android Market
Step 2: Launch ROM Manger and tap “Backup Current ROM”.
[Question, where will my backup-ed ROM will be located?]
To overclock my GT 10.1 device
Step 1: Download the 1.4Ghz kernal
Step 2: Using ROM Manger reboot your device into ClockworkMod Recovery
Step 3: Tap “Install zip from /sdcard” and choose the zip file you just recently downloaded
Step 4: Reboot your device
Step 5: Purchase and download the setCPU Android app (only costs about the same as a cup of coffee)
Step 6: Using any free file manager app unzip and install setCPU
[I believe I will use openup set CPU, make it to 1.4Ghz and change the setting to “Performance”, my tab will run at 1.4Ghz. If I am to unroot and return the product, it will best be de-clock it by sliding the speed back to 1.0 Ghz. Just that easy, am I right?]
Last but not least, ROM, I believe is like an OS for Galaxy tab? I heard Overclock + Starburst ROM gives the tab really a huge boost?
From "http://forum.xda-developers.com/showthread.php?t=1197776"
Am I able to backup my apps (Android market + cracked ones) from Stock and re-install all of them back in the Starburst ROM?
As the installation stats that I will need to do a factory reset of my Tab.
I wonder if anything goes wrong, is there anyway to recover? I was/am an IOS user but super newbie to Android.
I appreciate all the help and advices you have.
Best regards, cheers & thanks!
Edward
or1onz said:
Hi guys, I am new to Android and just got my GT 10.1, 3G+Wifi version. I done a few readings online and I really feel that rooting is way better to use the tab compared to non-rooted android devices. I would like to make sure of the steps before I start rooting and overclock it. If I have write or describe something wrong, I will appreciate it if you are able to guide me
So now my GT’s stock ROM is the original Honeycomb 3.1, without TouchWiz. I would like to root it first of all [Sorry I copy & paste, thanks original author!]
“How To: Root Samsung Galaxy Tab 10.1 [Easy Way]
Step1: Download the Zip file Here
Step2: From adb, run the following command (without quotes) “adb push allidoiswin.zip /sdcard/allidoiswin.zip”
Step3: Now punch in “adb reboot recovery”
Step4: Now simply flash the Zip file which you put via Adb, that’s it after running zip file your Samsung Galaxy Tab 10.1 will be fully rooted now get superuser access.”
[It’s that easy right? Not the older long steps that I have to do with nvflash ADX Mode or such?]
After I have rooted my tab. I guess it is best to backup my stock ROM beforehand?
Step 1: Download and install free ROM Manager app from the Android Market
Step 2: Launch ROM Manger and tap “Backup Current ROM”.
[Question, where will my backup-ed ROM will be located?]
To overclock my GT 10.1 device
Step 1: Download the 1.4Ghz kernal
Step 2: Using ROM Manger reboot your device into ClockworkMod Recovery
Step 3: Tap “Install zip from /sdcard” and choose the zip file you just recently downloaded
Step 4: Reboot your device
Step 5: Purchase and download the setCPU Android app (only costs about the same as a cup of coffee)
Step 6: Using any free file manager app unzip and install setCPU
[I believe I will use openup set CPU, make it to 1.4Ghz and change the setting to “Performance”, my tab will run at 1.4Ghz. If I am to unroot and return the product, it will best be de-clock it by sliding the speed back to 1.0 Ghz. Just that easy, am I right?]
Last but not least, ROM, I believe is like an OS for Galaxy tab? I heard Overclock + Starburst ROM gives the tab really a huge boost?
From "http://forum.xda-developers.com/showthread.php?t=1197776"
Am I able to backup my apps (Android market + cracked ones) from Stock and re-install all of them back in the Starburst ROM?
As the installation stats that I will need to do a factory reset of my Tab.
I wonder if anything goes wrong, is there anyway to recover? I was/am an IOS user but super newbie to Android.
I appreciate all the help and advices you have.
Best regards, cheers & thanks!
Edward
Click to expand...
Click to collapse
Ok my friend, Im going to refer you here http://forum.xda-developers.com/showthread.php?t=1171089 its the sticky in the android development section of this forum. I don't have the 3g device but it looks like you don't need to Odin flash clockwork mod recovery in order to flash .zip files (someone with a 3g tab can correct me on this if I'm wrong.) The root method that is outline in this thread is much easier than the way you have described using adb (you need to have the android SDK development platform installed to use the adb interface.) Make sure to visit this thread and follow the directions for the 3g p7500 model. Also ask questions there too that's what it's for.
I'm almost certain Starburst ROM is not available for the 3g tablet, there is a ROM called Broodcomb. All this info is also in the sticky thread I linked. If your going to use pershoots kernel to overclock keep in mind that kernels are experimental and overclcoking 'on our tab is not entirely necessary depending on your needs. Be sure to read through that kernel's thread and its entirety. (i know its a lot of reading but reading is your friend.)
You can back up your apps using Titanium backup an app that requires root. You can also back up your entire tab using the backup restore function in Clockwork Mod recovery.
Hope this helps.
Thanks!
I was reading too but I missed the 3G and 4G version.
Cheers
or1onz said:
Thanks!
I was reading too but I missed the 3G and 4G version.
Cheers
Click to expand...
Click to collapse
Good luck mate! Feel free to pm if you have questions. I'm no dev yet but I'd be glad to help in any way possible.
hie again. I tried to send you PM but I think I am unable to do so. Message didnt appear in 'Sent'. I paste what I was going to send to you again right here.
Thanks for offering help.
I am about to root my GT but I would like to re-assure with you
I am running on retail 3G version so I would have to follow the 3g version of rooting.
--------------------------------------------
RETAIL 3G
[GTP7500] >>> New!!!
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
rooted already
For CWM
1. After rooting download and install Rom Manager from market.
2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.
3. Done.
----------------------------------------------
I am sorry but what's CWM?
I believe I can root my tab, download Titanium BackUp to backup all my apps?
I can backup my Stock rom using ROm manager I believe?
Oh and, after reading all over, I believe I can just OC my tab but stays on the same ROM?
Cheers and a million thanks!
CWM is ClockWorkMod Recovery
or1onz said:
hie again. I tried to send you PM but I think I am unable to do so. Message didnt appear in 'Sent'. I paste what I was going to send to you again right here.
Thanks for offering help.
I am about to root my GT but I would like to re-assure with you
I am running on retail 3G version so I would have to follow the 3g version of rooting.
--------------------------------------------
RETAIL 3G
[GTP7500] >>> New!!!
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
rooted already
For CWM
1. After rooting download and install Rom Manager from market.
2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.
3. Done.
----------------------------------------------
I am sorry but what's CWM?
I believe I can root my tab, download Titanium BackUp to backup all my apps?
I can backup my Stock rom using ROm manager I believe?
Oh and, after reading all over, I believe I can just OC my tab but stays on the same ROM?
Cheers and a million thanks!
Click to expand...
Click to collapse
OK, yes flash the root.zip then install Clockwork Mod Recovery (CWR) via Rom manager app. Then reboot into recovery using the Rom manager app. This will allow you to make a backup of your entire tab manually ( i prefer to so it manualy rather than through rom mangager. Rebboot recovery and use the volume rocker to navigate up and down and the power button to select. (this is explained in detail in the sticky section of development thread) select backup and restore>backup This will make a flashable backup you can restore using the restore function the same way you made a backup. You flash zip files by choosing the option "install .zip from SD card."
Titanium backup is an app used to back up user apps so you can restore them should you ever have to wipe data.
You can overclock by installing a kernel (such as pershoots) that allows for you to scale up the processor. You do this with an app called SETCPU. YOu do not need a custom rom to flash this kernel.
Hope this helps.
Help!!
i been surfing the internet trying to find a way of how i can root my device. so far ive had on luck. i have tried gingerbreak but i don't think this has even worked. does anyone have any ideas of how you could root this particular device. if you have any suggestions or know how you can, i would be very grateful.
HOWTO - root PMP5080B
There is a way to root the tablet.
But it it does not root the runnning version, it roots the update image.
So if don't have the most actual firmware try this:
(maybe you can flash the firmware even it is not newer, but i don't know how)
Todo (Windows PC necessary):
At first load the latest firmware and unzip it:
h t t p : / / w w w .prestigio.com/info/product/downloads?NODE_ID=61101103718510974&ITEM=110706112617507776
Download the Wendal tool:
h t t p s :/ / docs.google.com/leaf?id=0B8h...RjZjFmODdiZTQ1
Then follow this steps:
1. Unzip the Wendal tool, you get a folder named "RK29xxImagetools_v2.1".
2. copy the update.img from Prestigio firmware download in the "RK29xxImagetools_v2.1" folder and rename the file to "wendal.img"
3. start "Runme.bat"
4. press "1", you get the message that you have to rename your file. Since you have already done this before proceed. The batch file starts, make sure you dont see any errors.
5. press "2" followed by "Enter". The rootet image will be created automatically
6. end the programm with "3"
7. in the "RK29xxImagetools_v2.1" you will find a file named "wendal-new.img", copy it to your SD card and rename it to "update.img".
8. put your SD card in your tablet, you will get a message to update your firmware
9. the tablet reboots, flashes the new firmware
10. be happy with your root access
Still having problems.
i have done what you said for me to do but when i rename the firmware to "wendal.img" and run it for some reason it keeps saying i haven't put the firmware in the folder when i have. do you know what how you can sort this out.
cheers
Did you unzip the firmware download?
Tried, tested & confirmed working
Just like to note that the software used will give you a warning about placing the update.img in the correct folder and renaming it even when it has already been done. You just have to press enter!
I have 5080B and i want to root it, but on ICS stock rom. Problem is, i cannot use wendal tools cause it can't add su and superuser.apk into /system ("no such directory") and even earlier i used to root gingerbread with these tools it is half-root - /system not rw, but superuser works
i saw update 2.0.2 from prestigio, pre-rooted, but i want to root this, newest version, 2.0.3
i have linux setup running and i tried mounting system.img but i can only add su, and nothing else cause there's no space...
also, how do i boot recovery from the device itself? i tried vol- and power key but there is an image of an 'destroyed' Android bot, no options there at all
Same problem - want root on Prestigio PMP 5080B
Just got a Prestigio PMP5080B running ICS 4 and want to root the tablet. I read from the preceding message that thhe method discussed here doesn't seem to work with it. Any ideas would be most welcomed here too.
By the way Hi!
Ziggy
help
remoh said:
There is a way to root the tablet.
But it it does not root the runnning version, it roots the update image.
So if don't have the most actual firmware try this:
(maybe you can flash the firmware even it is not newer, but i don't know how)
Todo (Windows PC necessary):
At first load the latest firmware and unzip it:
h t t p : / / w w w .prestigio.com/info/product/downloads?NODE_ID=61101103718510974&ITEM=110706112617507776
Download the Wendal tool:
h t t p s :/ / docs.google.com/leaf?id=0B8h...RjZjFmODdiZTQ1
Then follow this steps:
1. Unzip the Wendal tool, you get a folder named "RK29xxImagetools_v2.1".
2. copy the update.img from Prestigio firmware download in the "RK29xxImagetools_v2.1" folder and rename the file to "wendal.img"
3. start "Runme.bat"
4. press "1", you get the message that you have to rename your file. Since you have already done this before proceed. The batch file starts, make sure you dont see any errors.
5. press "2" followed by "Enter". The rootet image will be created automatically
6. end the programm with "3"
7. in the "RK29xxImagetools_v2.1" you will find a file named "wendal-new.img", copy it to your SD card and rename it to "update.img".
8. put your SD card in your tablet, you will get a message to update your firmware
9. the tablet reboots, flashes the new firmware
10. be happy with your root access
Click to expand...
Click to collapse
Hey, i have done everything right, but after unzipping the update.zip, i find only the boot.img file not the update.img file...and even after renaming it to wendal.img, the runme.bat program says FAILED...any clue how this can be fixed?
TVMALOPE.IM said:
Hey, i have done everything right, but after unzipping the update.zip, i find only the boot.img file not the update.img file...and even after renaming it to wendal.img, the runme.bat program says FAILED...any clue how this can be fixed?
Click to expand...
Click to collapse
If you want, i can share my rootet version 1.0.26 for you, i still have the old .img file
But actually i am using this version on my pad:
http://x--t-e-a-m.blogspot.de/
I think it is far better than the original firmware (root included, it is Android 4.1 !)
Italian people did it, so maybe bing translator can help you
http://www.microsofttranslator.com/bv.aspx?from=&to=en&a=http://x--t-e-a-m.blogspot.de/
help
thanks but im new to android so i cant understand, can you send me your .img file...because i just want to copy straight to memory card and get root access, please...my tab is PMP7170B3G
TVMALOPE.IM said:
thanks but im new to android so i cant understand, can you send me your .img file...because i just want to copy straight to memory card and get root access, please...my tab is PMP7170B3G
Click to expand...
Click to collapse
The img file is for PMP5080B, so it won't help. Wrong thread, sorry
I tried to install a custom rom yesterday. Unluckily I treid to do it quickly before leaving the house. I rooted my tab, then copied the custom rom file and the Gapps file to my internal storage card and also installed a newer CWM version. At some point I must have formated my entire Date because there are no files left on my internal storage card. The tab goes up to the Samsung Logo and that's it. I'm guessing that there is no OS installed on the device. (Galaxy Tab 10.1n 3G - GT-P7501)
Now to my questions:
How can I copy the ROM File to the internal storage card using odin or any other programm? I can go into the download mode and I can start CWM.
Do I have to install anything else or should the Rom be enough?
I read somewhere, that I should copy the PIT File to my tab but I can't find the file anywhere!
After spending the last 4 hours looking for answers and a solution I hope that someone here can help.
Barryl3 said:
I tried to install a custom rom yesterday. Unluckily I treid to do it quickly before leaving the house. I rooted my tab, then copied the custom rom file and the Gapps file to my internal storage card and also installed a newer CWM version. At some point I must have formated my entire Date because there are no files left on my internal storage card. The tab goes up to the Samsung Logo and that's it. I'm guessing that there is no OS installed on the device. (Galaxy Tab 10.1n 3G - GT-P7501)
Now to my questions:
How can I copy the ROM File to the internal storage card using odin or any other programm? I can go into the download mode and I can start CWM.
Do I have to install anything else or should the Rom be enough?
I read somewhere, that I should copy the PIT File to my tab but I can't find the file anywhere!
After spending the last 4 hours looking for answers and a solution I hope that someone here can help.
Click to expand...
Click to collapse
You can't use odin to copy a file to your device and the mount sd-card option in CWM has never worked for me.
What you need to do is flash a stock odin file with its pit file and then you can reroot and reflash CWM.
Put the rom and gapps on your tab,
and hopefully then you can flash the rom everything will work correctly.
Here is a link to the odin tar file I use: https://www.dropbox.com/s/3mpm0lez9ikbzvf/Stock-3.2-HTJ85B.UEKMM.tar
You can find a tutorial for flashing this on XDA somewhere.
Thank you so much!!
It didn't work at first but after taking the tab out of the docking station and changing the usb port it finally flashed everything without hanging at the bin file. i will try to install a custom rom now.
thanks again!
Barryl3 said:
Thank you so much!!
It didn't work at first but after taking the tab out of the docking station and changing the usb port it finally flashed everything without hanging at the bin file. i will try to install a custom rom now.
thanks again!
Click to expand...
Click to collapse
No problem! I'm just glad it all worked out for you!
I am facing same problem but with TWRP recovery mode. I wiped out sdcard and all data. I am using P7500 tab. Can you help me through the process. All I can do it right now is go it recovery mode, nothing else.
well, just do what highriser posted, download odin, download a tar file that represents a Gtab ROM and flash it to your tab using download mode. As I am at work I can not provide you with links to the files (as online storage is blocked by our IT Security).
Check this thread and pay attention to the "UNROOTING & RESTORING STOCK RECOVERY" part.
http://forum.xda-developers.com/showthread.php?t=1171089&highlight=filesfordummies
Thanks. I managed to make it work. I was having problem finding PIT file.
Sent from my Galaxy Nexus using Tapatalk 2
Hi!
I have a Galaxy Note 2, using instructions on the Web I
got Odin3 1.85 as well as CF-Auto-Root-t0lte-t0ltexx-gtn7105
and rooted my Note 2 (N7105)
Now I want to use this mod:
http://forum.xda-developers.com/showthread.php?t=1961314
but I have no idea what "LJA/LJ7/LJ3/LJ4 etc" means so I anyway downloaded "N7105.deodex.LJ4" as it seems be the only one with my model number (please confirm if that is correct) now looking into the zip file I see I have "META-INF" and "system", what do I do with these files to "install" this mod?
Thanks in advance!
to "install" this mod , flash the file you have using odin.. (i'm assuming you know how to do so..)
But you need to have you phone deodex for the mod to work
tutorial on de-odexing your phone - http://forum.xda-developers.com/showthread.php?t=2023496
TechMasta said:
to "install" this mod , flash the file you have using odin.. (i'm assuming you know how to do so..)
Click to expand...
Click to collapse
The same way I "rooted" the phone? But there are two directories, whch directory do I select with Odin?
TechMasta said:
But you need to have you phone deodex for the mod to work
tutorial on de-odexing your phone - http://forum.xda-developers.com/showthread.php?t=2023496
Click to expand...
Click to collapse
THANK YOU!
That makes more sense, will go through that a couple of times before doing it!
Cheers!
Crappl said:
Hi!
I have a Galaxy Note 2, using instructions on the Web I
got Odin3 1.85 as well as CF-Auto-Root-t0lte-t0ltexx-gtn7105
and rooted my Note 2 (N7105)
Now I want to use this mod:
http://forum.xda-developers.com/showthread.php?t=1961314
but I have no idea what "LJA/LJ7/LJ3/LJ4 etc" means so I anyway downloaded "N7105.deodex.LJ4" as it seems be the only one with my model number (please confirm if that is correct) now looking into the zip file I see I have "META-INF" and "system", what do I do with these files to "install" this mod?
Thanks in advance!
Click to expand...
Click to collapse
Where did you place the Meta-INF files? I know system files goto system/framework but I cant find where Meta-INF files go. I'm using a root file manager.
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?