So I had a moto e with it's bootloader unlocked, and had a custom ROM running on it; however without my knowledge, someone gave the phone to a local (unauthorized )service center. I am not sure about what they did but after this incident, I get the Bootloader unlocked warning when it powers on, but then it directly goes to the fastboot menu saying that there was a fall through in the normal boot-up procedure, and 'system image validation failed'. However I was able to boot into android by rebooting a number of times. But recently, when it did boot up after several attempts the IMEI numbers were gone, so it wouldn't recognize my SIM cards.
I should also mention that the fastboot menu says that the phone is LOCKED. I tried using fastboot, but i cannot even get the unlock code info, or unlock the bootloader itself.
At this point, what do I do? Do I try flashing the same firmware again?
Thank You.
Try flashing the stock firmware :fingers-crossed: Best of Luck!
Hit Thanks if I Helped!!!!!!!!!!!
So I recently got a Nexus 9. I think it was affected by the battery issues with android nougat. I rooted and used greenify and got much better battery life but decided I wanted to unroot and see if over a couple days the battery life would have gotten better. So I connected to my computer and stupidly sent the "fastboot flashing lock" command and now my Nexus is stuck in a boot loop because of TWRP. I knew that locking the bootloader would initiate a factory reset but didn't take into account that TWRP may affect that so now I can not use my Nexus. The device says it is a developer edition and not intended for personal use and I don't I know what to try. Just letting everyone know I only tried to sideloading and flash. I appreciate everyone who takes the time to read this and try to help.
Have you tried following instructions from google to flash a factory image ?
https://developers.google.com/android/images
I have but I can't flash due to the bootloader being locked and I can't sideloading because every time I tried it just errors or does nothing
AUSTIZ1997 said:
I have but I can't flash due to the bootloader being locked and I can't sideloading because every time I tried it just errors or does nothing
Click to expand...
Click to collapse
Did you try booting your nexus to fast boot and execute fastboot oem unlock?
I have, it just send me an error message
Update, I was able to finally get into the custom recovery and tried to flash the stock recovery and now it just boots into fastboot mode but I got rid of the custom recovery (as far as I know) and the boot screen that said the tablet was a developer device
Same problem here in May 2017, the OTA update prompted by Google sent the device into a bootloop. As the Bootloader was locked and there was no way to change to USB debugging mode it wasn't possible to use Recovery mode or to flash an OTA. Wiped data cache, tried all options in HBoot menu, tried flashing OTAs and full block OTA didn't work either. Just stuck in bootloop.
Repair shop encountered same problems so they then suspected the logic board. They heated it up to reflow the solder and success! Logic board may fail again through dry joint but I believe this risk can't be avoided by switching manufacturer as they all use the same component-to-board soldering practice.
Many of us are on custom OS and want to return back to stock Indian OS which was not possible till now. Below posted is a tried and tested method by me as well as my friend @ankan1993.
I assume you are unlocked BL and your device is atleast not bricked.
Please follow this guide step by step to get a stock working device. This is for Honor V10 Indian Version C675 and I'm not responsible for your loss if you make this worst by trying this on other variants/models or if you choose not to follow this guide properly.
I assume you are on Berkley TWRP with the latest version, unmodified one.
Downloads : (Keep both in your fastboot folder in PC)
Stock Recovery : https://drive.google.com/file/d/1WEUHRrba1dV3109e7h7b3Hp_aJhy0vM8/view?usp=sharing (stockrec.img)
Stock System Image : https://drive.google.com/file/d/1IABtk7HJ9ml6kOpytYHrnT6z3C1_9IfW/view
1. Enter TWRP and go to wipe -> Advanced -> Select system and data, and wipe them.
2. In TWRP, go back and Click Reboot button on main screen and reboot to Bootloader.
3. Connect you device and open cmd_here (open as administrator) from fastboot folder. ( I assume fastboot is installed and working in your system. You can check by the command "fastboot devices" . Device should show there. )
4. Type "fastboot flash recovery_ramdisk stockrec.img" (It should complete without error)
5. Once completes, Type "fastboot flash system system.img" (This may show error like "Invalid sparse file format". Ignore that and keep waiting for 10-12 minutes until the system gets flashed completely.)
6. Once it gets completed, disconnect your device and then press Vol up + power, until it screen shows stock recovery.
7. In stock recovery, use factory reset and cache wipe option one by one and then reboot.
Hit thanks if you think it helped :fingers-crossed:
Finally, after days, after being tormented by the bugs of custom Roms we have something to cheer about. Kudos Oreopie! Cheers to the long hours.
Kudo's bro.. appreciate your efforts :good:
Will this method also lock the Bootloader to stock?
vardaraju said:
Will this method also lock the Bootloader to stock?
Click to expand...
Click to collapse
No, It won't.
Im unable to access bootloader/recovery mode after unlocking bootloader with volume down+power button, used twrp option to reboot to bootloader, but now i flashed stock recovery and this system image, device bootlooped and im unable to access bootloader, i hold the keys but instantly that warning screen comes up, please help..started using android since 2010 with HTC desire HD and never in my life i stepped in service center because those devices were brick proof, looks like honor made me step into service center
didnt work for me, followed exact steps as mentioned above but stock recovery keeps giving error while factory resetting the device, device ends up in bootloop,, this device is crazy, i need to connect my device to pc and then press voldown+ power to access bootloader else it just jumps to warning screen
aditya desai said:
didnt work for me, followed exact steps as mentioned above but stock recovery keeps giving error while factory resetting the device, device ends up in bootloop,, this device is crazy, i need to connect my device to pc and then press voldown+ power to access bootloader else it just jumps to warning screen
Click to expand...
Click to collapse
Obviously warning screen will come up, but at the same moment you have to just leave power button and keep on pressing vol down button, until you get into bootloader mode. It takes time bro and let me tell you one thing, no matter which mode you boot, no matter what ROM it is, once the bootloader is unlocked it implies that the unlocked warning screen will show and then it will be allowed to get into whatever mode you wish.
Try it as I told, be patient and follow the same guide exactly if you do not wish to visit service centre. There is nothing wrong happening with you other than an improper method being followed in haste
aditya desai said:
Im unable to access bootloader/recovery mode after unlocking bootloader with volume down+power button, used twrp option to reboot to bootloader, but now i flashed stock recovery and this system image, device bootlooped and im unable to access bootloader, i hold the keys but instantly that warning screen comes up, please help..started using android since 2010 with HTC desire HD and never in my life i stepped in service center because those devices were brick proof, looks like honor made me step into service center
Click to expand...
Click to collapse
In cases of a bootloop, follow this- https://forum.xda-developers.com/ho...ustom-rom-to-stock-rom-honor-view-10-t3802872
will the system image work on honor 7x??
Can you share the screenshot of the about phone screen please
Anyone got it working? the stock recovery keeps showing error when factory resetting the device, error shows some where at 12%, it just shows exclamation mark, ROM doesn't boots up
Not working!
Rj_Param said:
Not working!
Click to expand...
Click to collapse
What is the issue and what you want to do.
shashank1320 said:
What is the issue and what you want to do.
Click to expand...
Click to collapse
I am on lineage and want to go back to the stock ROM. I also have backup of my system but i have tried many times after flashing the system image it is going in boot loop so i have followed all methods and it's not working..
Every time i have tried after flashing system whenever i go to recover to do factory reset it failed. Even i tried to lock the bootloader but nothing seems to be working.
Rj_Param said:
I am on lineage and want to go back to the stock ROM. I also have backup of my system but i have tried many times after flashing the system image it is going in boot loop so i have followed all methods and it's not working..
Every time i have tried after flashing system whenever i go to recover to do factory reset it failed. Even i tried to lock the bootloader but nothing seems to be working.
Click to expand...
Click to collapse
Because on custom you are on 8.1 and twrp doesn't support yet.
May be you can try dload the b161 version which is out on firmware finder now.
shashank1320 said:
Because on custom you are on 8.1 and twrp doesn't support yet.
May be you can try dload the b161 version which is out on firmware finder now.
Click to expand...
Click to collapse
I'll give it a try today...thanks
Invalid
as you mentioned, i m getting this error "invalid sprase file format". I waited more than 30 mins, still i couldn't see any message like compeleted or success. Still showing only that error "invalid spase file format". Help me with this.
Tamilarasan_Indian said:
as you mentioned, i m getting this error "invalid sprase file format". I waited more than 30 mins, still i couldn't see any message like compeleted or success. Still showing only that error "invalid spase file format". Help me with this.
Click to expand...
Click to collapse
Invalid sparse error happens when trying to flash .IMG files in Windows system.
It can be easily solved by using Linux system.
thanks for the reply
miststudent2011 said:
Invalid sparse error happens when trying to flash .IMG files in Windows system.
It can be easily solved by using Linux system.
Click to expand...
Click to collapse
I dont have Linux , and tried to flash other SYSTEM.img file for honor v10 from other threads. It completed flashing but still am not able to login into phone successfully. Still stuck at bootloop. Help me
Real quick back story: Originally this device was being rooted to try to perform some data recovery after a factory reset. Everything went fine to unlock boot loader and root phone, TWRP was used as a recovery manager, but after installing SuperSU it wouldn't load from the booted device (error about binaries missing when clicking its icon). So a newer SuperSU zip was found and installed, and then the phone bricked on reboot. Just would freeze at the HTC logo with white background.
Fast forward to no longer needing the data recovery, just want to restore back to working condition. The boot loader was relocked and the latest RUU package from HTC was downloaded for AT&T build. Booting to the boot loader and setting it to fastboot USB, everything works fine running RUU (tells me current OS version and what it will flash to, etc) until it gets to the point where it says it needs to reboot to the bootloader on the RUU software (even though that is where I am initiating RUU flash from in the first place). The phone reboots to a black screen with HTC logo, and then the RUU software gets error 171 that it cannot communicate with the device. When RUU gets an error, there is no retry, only exit and start again. I read on another post someone said don't worry if this happens, just hit exit, run RUU again and it will pick up and continue to flash. However when you click exit on RUU, the phone reboots back to the white screen with HTC logo and hangs there.
Does anyone have any advice to get this device back to a stock android install? Thanks. If there is a better sub forum for this question, please let me know and I will post there.
I unlocked my phone (BLA-L29 9.0.0.159(C636E2R1P13)) and flashed twrp. I accidently press install update and somehow im stuck in bootloop. It loop endlessly between "Your device is unlocked and cant be trusted,..." and twrp but it just showed twrp for a few seconds, bringing me back again to that page. Anyone can help me on this?
edit: i cant do anything, pressing the buttons wont help either
edit2: im wrong, i managed to get in fastboot
edit3: i tried to relock bootloader but it failed, it showed an error like this "fastboot failed (root type is risk)". also i cant seem to boot into system after i followed this guide https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Have you tried flashing the complete stock firmware via e recovery?
When you are on the "can't be trusted" screen you get this option.
Dixkxy said:
I unlocked my phone (BLA-L29 9.0.0.159(C636E2R1P13)) and flashed twrp. I accidently press install update and somehow im stuck in bootloop. It loop endlessly between "Your device is unlocked and cant be trusted,..." and twrp but it just showed twrp for a few seconds, bringing me back again to that page. Anyone can help me on this?
edit: i cant do anything, pressing the buttons wont help either
edit2: im wrong, i managed to get in fastboot
edit3: i tried to relock bootloader but it failed, it showed an error like this "fastboot failed (root type is risk)". also i cant seem to boot into system after i followed this guide https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Click to expand...
Click to collapse
There is no working TWRP for EMUI 9. TWRP is only for EMUI 8...
Try to reflash original recovery_ramdisk.img with fastboot.