Related
PORT AOKP OREO From MiA1 With Magisk 16.0 23-03 :
Link
Thanks to @ravinder0003
PORT RR 6.0 From MiA1 With Magisk 16.0 04-11 :
Link
Thanks to @mountaser halak
PORT Android One Beta 13-03 From MiA1 With Magisk 16.0 :
(no needed Gapps)
Download link :
MEGA
How to install:
- Unlock your bootloader
- Flash A1 Oreo Firmware
- Flash Oreo TWRP modded
- Wipe Data/Cache/Dalvik/System
- Flash ROM zip through TWRP
- Flash Gapps pico 8.1
- Reboot to System
Known issues:
- You tell me.
XDA:DevDB Information
AOSP Oreo for Mi5X , ROM for the Xiaomi Mi 5X, ROM for the Xiaomi Mi 5X
Contributors
mbppereira, Alex12, ravinder0003
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP oreo by Alex12, FIRMWARE Mi A1 OREO
Based On: AOKP
Version Information
Status: Beta
Created 2018-03-11
Last Updated 2018-04-11
Change log:
RR 6.0 04-04:
https://raw.githubusercontent.com/Tissot-Development/RR-OTA/master/changelog.txt
AOKP OREO 03-23:
- Jack problem solved (Mi 5X)
- Magisk Incluided
- Added Xiaomi Doze
- Fixed Live Display
- Added Dt2w
- Rebased on new sources from Xiaomi
Help me
it does not boot. Stand at the Mi logo
levietnamm said:
it does not boot. Stand at the Mi logo
Click to expand...
Click to collapse
same problem
Have you tried this "Go to recovery then after you flashed it, go to "Advanced" then tap on "Terminal". Write "a1to5x" and press Enter. Wait until it finishes. Make proper wipes and reboot."
AncientLord said:
Have you tried this "Go to recovery then after you flashed it, go to "Advanced" then tap on "Terminal". Write "a1to5x" and press Enter. Wait until it finishes. Make proper wipes and reboot."
Click to expand...
Click to collapse
It didn't help. At the end I wipe cache and dalvik cache
yes it boot.... just intall the modded oreo twrp, install rom, gapps and magisk... playing now
Same problem as well
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
adioph said:
yes it boot.... just intall the modded oreo twrp, install rom, gapps and magisk... playing now
Click to expand...
Click to collapse
Which gapps package did you use ?!
all works, but voice input replaced the normal keyboard and I can not access in my google account (stock gapps)
I made full wipe, flashed the rom type a1to5x in terminal and then made wipe cache and dalvik cache but when try to flash the gapps an error appears that the gapps doesn't match the rom
jdki666 said:
I made full wipe, flashed the rom type a1to5x in terminal and then made wipe cache and dalvik cache but when try to flash the gapps an error appears that the gapps doesn't match the rom
Click to expand...
Click to collapse
My phone running the oreo update 8.0.0 with the oreo moded twrp
@mbppereira
Thank you for your great work.
I am not sure that if this rom can work well with this recovery.
If not, would you please port it for Mi5X?
vangame said:
@mbppereira
Thank you for your great work.
I am not sure that if this rom can work well with this recovery.
If not, would you please port it for Mi5X?
Click to expand...
Click to collapse
Here
https://androidfilehost.com/?fid=673956719939826760
mbppereira said:
Here
https://androidfilehost.com/?fid=673956719939826760
Click to expand...
Click to collapse
Oh, so fantastic, thank you very much.
Hope you post a new thread and add some information.
Do this rom port from the latest build[08/03/2018]?
vangame said:
@mbppereira
Thank you for your great work.
I am not sure that if this rom can work well with this recovery.
If not, would you please port it for Mi5X?
Click to expand...
Click to collapse
Are you extracting payload.bin or someone with the A1 sent you the dumped system.img and boot.img?
Aex12 said:
Are you extracting payload.bin or someone with the A1 sent you the dumped system.img and boot.img?
Click to expand...
Click to collapse
I'm extracting with a Python Script.
Do you want help me fix the jack problem ? I have no idea how fix it.
vangame said:
Oh, so fantastic, thank you very much.
Hope you post a new thread and add some information.
Do this rom port from the latest build[08/03/2018]?
Click to expand...
Click to collapse
Yes
Finally it work thanks you for the fantastic work
Aex12 said:
Are you extracting payload.bin or someone with the A1 sent you the dumped system.img and boot.img?
Click to expand...
Click to collapse
@Aex12, do you have tools to extract payload.bin to system.img?
@alex12 The script is here:
https://drive.google.com/open?id=1fB4r68tj7zQKCooyopYux8cQzGPxDKno
comand: ./payload_dumper.py payload.bin
Is there any ported oxygen os for vince?, I recently saw a video in which there is a ported oxygen os for note 5 pro so is there any for vince please tell me
Good question. I would like to know as well
pbk14 said:
Is there any ported oxygen os for vince?, I recently saw a video in which there is a ported oxygen os for note 5 pro so is there any for vince please tell me
Click to expand...
Click to collapse
yes!
hussein1 said:
yes!
Click to expand...
Click to collapse
Can you link me pls
I think is this one ...
https://forum.xda-developers.com/redmi-note-5/development/rom-nitrogenos-pie-t3862742
foxmonter said:
I think is this one ...
https://forum.xda-developers.com/redmi-note-5/development/rom-nitrogenos-pie-t3862742
Click to expand...
Click to collapse
Oxygen is O2 and Nitrogen is N2
Looking for the OxygenOS from OnePlus phones ported to vince.
As an ex Redmi 5 Plus user, and a new OnePlus 6 user, i agree, OxygenOS would be amazing. It's the best ROM i ever used, and i've been rooting and changing ROMs for 8 years, that means something !
Some things look very device-specific though, and RAM management is one of a kind (New feature on the 6T uses available RAM to store app data like a Ramdisk, but for this, you need huge amounts of it) but if a Pixel ROM can be ported to vince, why an Oxygen one couldn't haha !
pbk14 said:
Can you link me pls
Click to expand...
Click to collapse
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Totone56 said:
As an ex Redmi 5 Plus user, and a new OnePlus 6 user, i agree, OxygenOS would be amazing. It's the best ROM i ever used, and i've been rooting and changing ROMs for 8 years, that means something !
Some things look very device-specific though, and RAM management is one of a kind (New feature on the 6T uses available RAM to store app data like a Ramdisk, but for this, you need huge amounts of it) but if a Pixel ROM can be ported to vince, why an Oxygen one couldn't haha !
Click to expand...
Click to collapse
Hahahahaha
---------- Post added at 01:39 PM ---------- Previous post was at 01:30 PM ----------
pbk14 said:
Can you link me pls
Click to expand...
Click to collapse
Do you need Huawei EMUI as well?
So:
Huawei EMUI 8.2 Fully Stable for vince!!!
Download Link:
https://mega.nz/#!NmJy1KRA!5fTVNRno0lMAzyyRclbesi7_N-4-1Kmxd6i_33sjNeY
First install this ROM
Based Treble ROM.
https://cloud.mail.ru/public/2b4a/s1PCxhxUa
hussein1 said:
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Click to expand...
Click to collapse
Awesome to hear how do i install the file
goldbeard said:
Awesome to hear how do i install the file
Click to expand...
Click to collapse
1-Install MIUI 10
2-Install this rom https://cloud.mail.ru/public/2b4a/s1PCxhxUa
3-Download & Extract Oxygen os rom and copy to storage
3-go to twrp recovery and restore and selected oxygen folder
4- reboot system:good:
hussein1 said:
Hahahahaha
---------- Post added at 01:39 PM ---------- Previous post was at 01:30 PM ----------
Do you need Huawei EMUI as well?
So:
Huawei EMUI 8.2 Fully Stable for vince!!!
Download Link:
https://mega.nz/#!NmJy1KRA!5fTVNRno0lMAzyyRclbesi7_N-4-1Kmxd6i_33sjNeY
First install this ROM
Based Treble ROM.
https://cloud.mail.ru/public/2b4a/s1PCxhxUa
Click to expand...
Click to collapse
Thanks bro
hussein1 said:
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Click to expand...
Click to collapse
Well, amazing haha !
gestures tab in settings menu keeps crashing any ideea what to do?
Do you need Huawei EMUI as well?
So:
Huawei EMUI 8.2 Fully Stable for vince!!!
Download Link:
https://mega.nz/#!NmJy1KRA!5fTVNRno0lMAzyyRclbesi7_N-4-1Kmxd6i_33sjNeY
First install this ROM
Based Treble ROM.
https://cloud.mail.ru/public/2b4a/s1PCxhxUa
Click to expand...
Click to collapse
Fist of all thanks for share these links, Can you explain the exact process to install:
- Emui
- OxygenOs
Emui is not booting, or stay in Android generic bootanimation or it redirects me to fastboot.
What I did.
- Flashed AOSP vendor treble based and rebooted to android.
- Rebooted to TWRP, deleted system (in other try not deleting it) and restored backup of system.
- Mount vendor and flashed patch-1 then patch-2, rebooted.
- it stays in Android and if I wipe dalvik and cache it redirects me to fastboot.
hussein1 said:
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Click to expand...
Click to collapse
Can we try it with cardinal Aosp which we were using for pie gsi ?
And the procedure would be
1. Installing the Base rom (ur suggested or Cardinal Aosp)
2. And restoring the oxygen os backup (can we use orangefox recovery or only twrp treble)
3. Then rebooting to system
Is the above steps right ?
bug: on oxygen os, the headphone no detect in music player, any solution?
hussein1 said:
1-Install MIUI 10
2-Install this rom https://cloud.mail.ru/public/2b4a/s1PCxhxUa
3-Download & Extract Oxygen os rom and copy to storage
3-go to twrp recovery and restore and selected oxygen folder
4- reboot system:good:
Click to expand...
Click to collapse
I was never able to get this rom installed...i couldnt do the point 3, i dont see the oxygen folder listed when i try to restore...using Orange Fox recovery
goldbeard said:
I was never able to get this rom installed...i couldnt do the point 3, i dont see the oxygen folder listed when i try to restore...using Orange Fox recovery
Click to expand...
Click to collapse
It´s a backup made with TWRP so only this recovery will detect the files
SubwayChamp said:
It´s a backup made with TWRP so only this recovery will detect the files
Click to expand...
Click to collapse
Emui doesnt boot, without flashing patches it ended up in boot loop and after flashing patches ( patch 1 always fail) it ended up in fastboot, dont know how the dev was able to boot it.
For Oxygen Os
* Battery hungry Rom
* Wired Headphones dont work
* Offscreen gestures dont work
* One plus camera dont work
But still i loved the Oxygen OS hopefully dev will give bug fixes.
1. Download a Poco rom that you want
2. Open the zip on your PC or mobile
3. Navigate to "META-INF/com/google/android"
4. Open the update-script with a text editor
5. Then remove every line at the beginig that starts with "assert" (they are almost always the first three lines)
6. Save it
7. Flash the ROM and a custom kernel for our device and enjoy it
(optional)
8. Flash this Magisk module to set the right build props for our device
Tested ROMs
This is the best guide I found yet!
You can flash oxygen os too that way?
The power of the Mi 8 be with you
johnnyman25 said:
You can flash oxygen os too that way?
Click to expand...
Click to collapse
I have not tried it yet but it should work.
Until now every rom that I have tried is working.
Hi, this sounds great, but, can works on Polaris? MiMix2s
Hello, do the software updates work, or this should be repeated for every update and then manually installed?
catalindobre said:
Hello, do the software updates work, or this should be repeated for every update and then manually installed?
Click to expand...
Click to collapse
You have to repeat the steps when there is a update.
johnnyman25 said:
You can flash oxygen os too that way?
The power of the Mi 8 be with you
Click to expand...
Click to collapse
No I don't think this will work.
Mi8 and Poco has almost the same hardware. That's why it works. Oxygen is for OnePlus and it's not similar as Poco.
Kollachi said:
No I don't think this will work.
Mi8 and Poco has almost the same hardware. That's why it works. Oxygen is for OnePlus and it's not similar as Poco.
Click to expand...
Click to collapse
There is a Oxygen port for the Poco phone..
jigs4wkiller said:
There is a Oxygen port for the Poco phone..
Click to expand...
Click to collapse
Ah ok I didn't know that. Sry I just accidentally landed here. I'm usually active at OP6 Threads lol. ^^
Tested and good working ROMs:
Bootleggers
CrDroid
MSM Xtended
SuperiorOS
ViperOS
Please tell me wihch roms are working for you so I can add it.
so none of this roms support AOD right?
vinicioh23 said:
so none of this roms support AOD right?
Click to expand...
Click to collapse
Look at the specific rom thread to see if it has AOD
Sorry, then this rom also work on mi 8?thanks
QUOTE=jigs4wkiller;79226285]Tested and good working ROMs:
Bootleggers
CrDroid
MSM Xtended
SuperiorOS
ViperOS
Please tell me wihch roms are working for you so I can add it.[/QUOTE]
GianniRu said:
Sorry, then this rom also work on mi 8?thanks
Click to expand...
Click to collapse
Pretty much every poco rom works for our device when you follow my guide
Then also oxygenOs?thanks man
jigs4wkiller said:
Pretty much every poco rom works for our device when you follow my guide
Click to expand...
Click to collapse
GianniRu said:
Then also oxygenOs?thanks man
Click to expand...
Click to collapse
Personally I didn't tried it but it should work as well
Has anyone got the OxygenOS Poco Port to work on their Mi 8? I'm currently trying but it's not booting up.
This is what I've done:
-changed the OxygenOS update-script
-wiped data,cache,dalvik + system
-did factory reset
-flashed the rom (prepped OxygenOS)
-flashed Mi8 kernel
-flashed DFE
-flashed the vendor.img you need for OxygenOS
I see the Oxygen boot animation but after 5 mins of trying to boot my Mi 8 resets into recovery
Would really love an OxygenOS port for the Mi 8 so hmu if u got this to work
Marlonese said:
Has anyone got the OxygenOS Poco Port to work on their Mi 8? I'm currently trying but it's not booting up.
This is what I've done:
-changed the OxygenOS update-script
-wiped data,cache,dalvik + system
-did factory reset
-flashed the rom (prepped OxygenOS)
-flashed Mi8 kernel
-flashed DFE
-flashed the vendor.img you need for OxygenOS
I see the Oxygen boot animation but after 5 mins of trying to boot my Mi 8 resets into recovery
Would really love an OxygenOS port for the Mi 8 so hmu if u got this to work
Click to expand...
Click to collapse
Maybe flashing DFE again after vender.img helps
raminta said:
Maybe flashing DFE again after vender.img helps
Click to expand...
Click to collapse
Didn't work for me :/
Hi. I have a Huawei MediaPad M5 8.4 with EMUI 9.1
The loader is open. How can I roll back to 8.1?
why rollback? if your bootloader is allready open?
flash treble android 10
havoc os is running on my m5 wifi and it's super smooth
i agree, drop Emui and grab AOSP. i've just flashed Quack (android10) Phh treble v.222 and it is perfect, smooth and AOSP!!!!
karlkluwe001 said:
why rollback? if your bootloader is allready open?
flash treble android 10
havoc os is running on my m5 wifi and it's super smooth
Click to expand...
Click to collapse
U flashed it with fastboot right? Aonly with gapps or witch one u flashed?
daser4berlin said:
U flashed it with fastboot right? Aonly with gapps or witch one u flashed?
Click to expand...
Click to collapse
yup flashed via fastboot
fastboot flash system xxxxxxx.img
(keep in mind to unpack rom after downloading - it comes in .xz packed format)
for the m5 wifi it's A64-AB,
( not A64-Aonly)
and having emui 9 on it before i flashed gsi rom
i used Havoc Rom - vanilla
https://forum.xda-developers.com/pr...e-development/havoc-os-3-3-gsi-archs-t4076903
karlkluwe001 said:
yup flashed via fastboot
fastboot flash system xxxxxxx.img
(keep in mind to unpack rom after downloading - it comes in .xz packed format)
for the m5 wifi it's A64-AB,
( not A64-Aonly)
and having emui 9 on it before i flashed gsi rom
i used Havoc Rom - vanilla
https://forum.xda-developers.com/pr...e-development/havoc-os-3-3-gsi-archs-t4076903
Click to expand...
Click to collapse
Yo.. Have u a Trick to become working playstore on it?
Gsi with gapps included wont Flash in fastboot.. Only vanilla build.. And for me the vanilla havoc was sucking xtrem on battery for me..
daser4berlin said:
Yo.. Have u a Trick to become working playstore on it?
Gsi with gapps included wont Flash in fastboot.. Only vanilla build.. And for me the vanilla havoc was sucking xtrem on battery for me..
Click to expand...
Click to collapse
yes - battery gets better when u choose the disable telephony option in the huawei special options in system settings
i don't use google sevices, i "adb install" my apps most of them are from fdroid, so i cant help you there
daser4berlin said:
Yo.. Have u a Trick to become working playstore on it?
Gsi with gapps included wont Flash in fastboot.. Only vanilla build.. And for me the vanilla havoc was sucking xtrem on battery for me..
Click to expand...
Click to collapse
Phh Treble Quack (Android 10) is available in different flavours: vanilla. floss, gapps, go (see here). I use the gapps version and it is pre-rooted with supersu (not magisk on GSI)
Build Lineage 18.1 for MIPAD 5 Pro (vanilla - without gapps)
Pen and keyboard not work!
What's in the assembly:
1) Fixed charging when the device is off
2) Fixed volume levels
3) Fixed the name of the device
4) System is available for write, you can make your edits
Download link: https://www.androidfilehost.com/?w=files&flid=335163
How to flash:
fastboot reboot fastboot
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash system lineage_18.1_elish.img
fastboot -w
fastboot reboot
If you use a magnetic cover, install flipflap.apk and give him the root right
Boot with magisk: https://www.androidfilehost.com/?w=files&flid=335211
GApps can be installed as module magisk
https://github.com/wacko1805/magiskgapps
Or microg + aurora
https://themagisk.com/microg-installer/
https://f-droid.org/en…ages/com.aurora.store/
Problems and their solutions:
1) Sound problems. Settings - Phh Treble Settings - Misc features - Disable audio effects
2) 120 Hz screen. Settings - Phh Treble Settings - Misc Feature - Force FPS - 120
3) Hide the PHH Treble Settings section in settings. adb shell "pm disable me.phh.treble.app/.TopLevelSettingsActivity"
The source image: https://sourceforge.net/projects/an...20220616-UNOFFICIAL-arm64_bvS.img.xz/download
HProt said:
Build Lineage 18.1 for MIPAD 5 Pro (vanilla i.e without gapps)
What's in the assembly:
1) Fixed charging when the device is off
2) Fixed volume levels
3) Fixed the name of the device
4) System is available for write, you can make your edits
If you use a magnetic cover, install flipflap.apk and give him the root right
Download link: https://4pda.to/pages/go/?u=https://mega.nz/file/FcVHARAS#is5R6zrSOp8HsbY4VIWLO8bWuw2k1jDuYGKEqk052uY&e=116028277
Click to expand...
Click to collapse
Honestly lack of development is only reason i didn't bought this device. Can't try yourself but huge thanks for trying
Amazing work! Was planning on giving custom ROMs ago when DotOS released properly.
How are we flashing this?
VortexHD said:
Amazing work! Was planning on giving custom ROMs ago when DotOS released properly.
How are we flashing this?
Click to expand...
Click to collapse
fastboot reboot fastboot
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash system lineage_18.1_elish.img
fastboot -w
fastboot reboot
Any chance of adding a dialer so I can make and take calls on the 5g model?
mickfitz said:
Any chance of adding a dialer so I can make and take calls on the 5g model?
Click to expand...
Click to collapse
The system is available for writing, you can put the apk to priv-app folder
Wow, can't wait to try!! Thanks for your effort! I have the 5g model. If I don't pursue voice calls, does it work without any modification? (I can't programme...). Also does the pen work? Cheers!
UmiCat said:
Wow, can't wait to try!! Thanks for your effort! I have the 5g model. If I don't pursue voice calls, does it work without any modification? (I can't programme...). Also does the pen work? Cheers!
Click to expand...
Click to collapse
Pen and keyboard will only work on miui
HProt said:
Pen and keyboard will only work on miui
Click to expand...
Click to collapse
OK thanks! Does the ROM work with the 5g model? (my other question)
No such device, I can't check. The system will definitely work, calls and SMS i don't know.
If you have the opportunity, try rom and write about the result
HProt said:
If you have the opportunity, try rom and write about the result
Click to expand...
Click to collapse
Are you going to update it monthly and fix bugs etc. ?
Thanks for your effort, nay I know can I flash gapps from fastboot ?
which gapps can be used 32bit or 64bits
Thanks
toystory3000 said:
Thanks for your effort, nay I know can I flash gapps from fastboot ?
which gapps can be used 32bit or 64bits
Thanks
Click to expand...
Click to collapse
no
Use magisk and install gapps or microg
Example: https://github.com/wacko1805/magiskgapps
EugenStanis said:
Are you going to update it monthly and fix bugs etc. ?
Click to expand...
Click to collapse
If possible and free time
amazing work
Hi, I saw 2 files
boot_V13.0.10.0_magisk_v25.1.rarboot_V13.0.8.0_magisk_v25.1.rarBut I am now on V13.0.6.0 and can't see any update to 13.0.8 or 13.0.10, do I need too update the firmware first (13.0.8 or 13.0.10) to flash the "rooted boot" boot_V13.0.10.0_magisk_v25.1.rar or boot_V13.0.10.0_magisk_v25.1.rar
Thanks!
toystory2000 said:
Hi, I saw 2 files
boot_V13.0.10.0_magisk_v25.1.rarboot_V13.0.8.0_magisk_v25.1.rarBut I am now on V13.0.6.0 and can't see any update to 13.0.8 or 13.0.10, do I need too update the firmware first (13.0.8 or 13.0.10) to flash the "rooted boot" boot_V13.0.10.0_magisk_v25.1.rar or boot_V13.0.10.0_magisk_v25.1.rar
Thanks!
Click to expand...
Click to collapse
magisk_13.0.6.0.RKYCNXM_patched-24100.img | by greatslon for Pad 5 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
HProt said:
magisk_13.0.6.0.RKYCNXM_patched-24100.img | by greatslon for Pad 5 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks a lot
bug
wired headset does not work