i was custom recovery. i sideloaded a oos11 firmware then i accidentally tried to reboot in fastboot and my phone stopped working. just black screen. takes no input from volume keys. device is detected by device manager. but msm tool doesn't detect it. when ever the device is connected it is detected by device manager as "Qualcomm HS-USB Diagnostics 900E".
help needed to unbrick my device
U update your drive to 9008, then use msm tool. Sorry for my bad English
Problem Fixed.
Got Help From Telegram OnePlus 9R Group.
First I Plugged The USB Cable
Then Pressed Both Volume Button And Powered Button For 2 Min.
Then MSM Will Detect The Device And After That You Can Flash Stock ROM
OnePlus 9R Community
Welcome to your OnePlus 9R Community! • Little Bit Off-Topic • Read rules (/rules) • Join our wallpaper channel @wallpaperly Join our updates channel @OnePlus9RNews
t.me
Related
Hello there,
i have a serious problem with my phone(redmi note prime dual sim)
*It doesn't go to fastboot(when power and vol- pressed simultaneously )
*No LED blinking when charging
.It doesn't switch on no matter how long you press the power button
when connected to computer, it is detected, but the device manager shows these words
(QHSUSB_BULK)
If install mi-flash is tool installed and the phone is connected to the computer,
(qualcomm HS-USB QDLoader 9008(COM10)
(i guess the mi flash tools comes with some qualcom drivers)
when i try to flash it i get this error
(reached the end of the file.(0x80070026: receiving hello packet))
i badly need this device to work, if there is anything i can do please guys let me know
Hello once again,
Today I went on to flash a Redmi 3S ROM on a Redmi 4 Prada, which have similar hardware.
I replaced the boot.img in the original ROM zip, modified the build.prop a bit, and flashed
Now the Redmi 4 won't boot to recovery or bootloader...
Furthermore, if I press the power button for a while, the device will turn on and immediately off
What should I do?
A detailed guide would help me, because I never found one detailed enough while working with device manager and stuff...
EDIT: I can't get it into fastboot and device manager shows "qualcomm hs-usb diagnostics 900e"
Solved. I used a deep flash cable (with black and white wires) and on device manager the device turned to "Qualcomm HS-USB QDLoader 9008"
After that, I was able to flash an official dev ROM using MiFlash
I accidentally flashed Redmi note 3 firmware into Redmi note 4. Now only red light is blinking. No fastboot also. Computer showing in ports Qualcomm hs usb qdloader 9008 (com3). Please help me flash full fastboot rom
if your computer detects your device as qdloader , that means it is in EDL mode, in this mode , you should be able to flash fastboot roms using miflash , you should read this thread first, http://en.miui.com/thread-565784-1-1.html . although the thread writes about flashing in fastboot mode, but it shouldn't differ alot from flashing in EDL mode, just follow the B part of the guide in the link, MIFlash should be able to detect your device and list it down as COM(number) .
As for the driver part, you shouldn't need to update anything if MIFlash can detect your device , as your computer already correctly detects it as QDLoader
chun_9876 said:
if your computer detects your device as qdloader , that means it is in EDL mode, in this mode , you should be able to flash fastboot roms using miflash , you should read this thread first, http://en.miui.com/thread-565784-1-1.html . although the thread writes about flashing in fastboot mode, but it shouldn't differ alot from flashing in EDL mode, just follow the B part of the guide in the link, MIFlash should be able to detect your device and list it down as COM(number) .
As for the driver part, you shouldn't need to update anything if MIFlash can detect your device , as your computer already correctly detects it as QDLoader
Click to expand...
Click to collapse
Thankyou for your valuable reply. Miflash detecting device. But error in flash. Then removed back cover and removed battery connection also. Then Miflash flashed the rom successfully
Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, here is the EDL packages (also known as MSM tools or unbrick tools) that can revive a bricked OnePlus Nord to Oxygen OS 11
You can also rollback your phone to a previous release of OOS with them if for some reason you would like to go back to an older firmware
You can download the following versions:
Only for Indian Devices
ANDROID 11:
[Mod Edit] Download link removed (URL shortener used to gain profit)
Instructions:
Launch MsmDownloadTool V4.0.exe.
On the login prompt select "Other" in the dropdown menu and click on Next.
Wait a few seconds until main window shows up.
Click on Target button and select India
Press Start button (this is done so that device will be "captured" automatically by tool instead of going back to normal boot after 10 seconds)
Power your device off.
Let it cool down for one minute.
Maintain volume up and volume down keys for at least 40 seconds to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable. (You may let volume keys go once done.)
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsoft.com/Search.aspx?q=qualcomm hs usb 9008 ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits :
@Some_Random_Username thanks for providing the text layout for this post.
Nice !!! Now don't have to hope between Android 10 and 11 every goddamn time
Hi, how did you get .ops file for android 11, I am looking for Europe Oxygen 11 file for msm flashing. Any help is appriciated
Any way we can retrieve the file?
saikiransalama said:
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, here is the EDL packages (also known as MSM tools or unbrick tools) that can revive a bricked OnePlus Nord to Oxygen OS 11
You can also rollback your phone to a previous release of OOS with them if for some reason you would like to go back to an older firmware
You can download the following versions:
Only for Indian Devices
ANDROID 11:
[Mod Edit] Download link removed (URL shortener used to gain profit)
Instructions:
Launch MsmDownloadTool V4.0.exe.
On the login prompt select "Other" in the dropdown menu and click on Next.
Wait a few seconds until main window shows up.
Click on Target button and select India
Press Start button (this is done so that device will be "captured" automatically by tool instead of going back to normal boot after 10 seconds)
Power your device off.
Let it cool down for one minute.
Maintain volume up and volume down keys for at least 40 seconds to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable. (You may let volume keys go once done.)
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsoft.com/Search.aspx?q=qualcomm hs usb 9008 ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits :
@Some_Random_Username thanks for providing the text layout for this post.
Click to expand...
Click to collapse
any hope to get this tool?