After installing CM13 update, my phone stucked in bootloop. So i decided to back to old version. Then problem starts. Phone is rotating wrong in landscape mode. Need to use rotation controller to solve this. But its annoying. I was trying to calibrate using compass, using OS3 with *#808# selfcalibrate, nothing helps. Rebooting doesnt help aswell. Any ideas whats happened
Screens:
https://www.dropbox.com/sh/5qfgbgwot...xlouFHMla?dl=0
Do you have the same issue when you flash another rom? In my opinion something weird happened during flash, so maybe Clean Flash will help?
Yes, same issue on CM13 nightly, CM14, OS3.
Did you tried the Maps resetting?
https://support.google.com/maps/answer/6145351?hl=en
Or last chance :
https://forums.oneplus.net/threads/...rometer-magnetometer-gyroscope-sensor.405894/
Kéno40 said:
Did you tried the Maps resetting?
https://support.google.com/maps/answer/6145351?hl=en
Or last chance :
https://forums.oneplus.net/threads/...rometer-magnetometer-gyroscope-sensor.405894/
Click to expand...
Click to collapse
Tried both. Nothing happened.
And an app like that :
https://play.google.com/store/apps/details?id=asd.vector.sensor
Tried on OS3 with dialer code *#808#.
RIGHT-HORIZONTAL-VERTICAL POSITION(ideal angle should be 90 degree) and LEFT-HORIZONTAL-VERTICAL POSITION(ideal angle should be 270 degree)
Click to expand...
Click to collapse
are Right 270 and Left 90
Problem solved. Downloaded stock rom and stock recovery. Flash. Unroot. Then I did all auto update to 3.1.3. And all work perfect.
Hello everyone,
My S6 EDGE on Lollipop:
Does not work light sensor , always set in full brightness
If I upgrade to Marshmallow or Nougat:
Light sensor gets fixed
Fingerprint / Lockscreen stops working
Wifi does not remember passwords after reboot
If I turn off Wifi I can't turn it back on unless I perform a reboot.
Testing the sensors on service menu all of them work
Tried cyanogenmod / lineage os , same problems
Do I have a defective unit although everything looks like it is a software problem
Any ideas? besides factory reset, clear cache, safe mode, etc.... all tried to no avail....
Thanks!
gabriel2007 said:
Hello everyone,
My S6 EDGE on Lollipop:
Does not work light sensor , always set in full brightness
If I upgrade to Marshmallow or Nougat:
Light sensor gets fixed
Fingerprint / Lockscreen stops working
Wifi does not remember passwords after reboot
If I turn off Wifi I can't turn it back on unless I perform a reboot.
Testing the sensors on service menu all of them work
Tried cyanogenmod / lineage os , same problems
Do I have a defective unit although everything looks like it is a software problem
Any ideas? besides factory reset, clear cache, safe mode, etc.... all tried to no avail....
Thanks!
Click to expand...
Click to collapse
I had the brightness issue once. It was always full and would flash from dim to full brightness constantly. And as i remember i flashed carhd custom rom which fixed the issue.
Hi, miui 9 global, android 7. samsung sensor.
i just magisk rooted my phone and edited build.prop to emable camera2api , so i could try google camera.. thats great, but now the stock camera no longer works in hdr or panorama modes. enable hdr mode and it says "cant connect to camera" and crashes.. panorama mode just immediately crashes. panorama mode on google camera is terrible, so i will really miss this feature.
i hoped that installing the extra features on the stock camera might help. i added those with a magisk module. new functions appear but same issue.
in frustration, i reverted build.prop back to original state..
camera still broken!!
ive rebooted and cleared cache in twrp.
help?
robinlawrie said:
Hi, miui 9 global, android 7. samsung sensor.
i just magisk rooted my phone and edited build.prop to emable camera2api , so i could try google camera.. thats great, but now the stock camera no longer works in hdr or panorama modes. enable hdr mode and it says "cant connect to camera" and crashes.. panorama mode just immediately crashes. panorama mode on google camera is terrible, so i will really miss this feature.
i hoped that installing the extra features on the stock camera might help. i added those with a magisk module. new functions appear but same issue.
in frustration, i reverted build.prop back to original state..
camera still broken!!
ive rebooted and cleared cache in twrp.
help?
Click to expand...
Click to collapse
Same issue on my redmi note 4
robinlawrie said:
Hi, miui 9 global, android 7. samsung sensor.
i just magisk rooted my phone and edited build.prop to emable camera2api , so i could try google camera.. thats great, but now the stock camera no longer works in hdr or panorama modes. enable hdr mode and it says "cant connect to camera" and crashes.. panorama mode just immediately crashes. panorama mode on google camera is terrible, so i will really miss this feature.
i hoped that installing the extra features on the stock camera might help. i added those with a magisk module. new functions appear but same issue.
in frustration, i reverted build.prop back to original state..
camera still broken!!
ive rebooted and cleared cache in twrp.
help?
Click to expand...
Click to collapse
suvi-lover said:
Same issue on my redmi note 4
Click to expand...
Click to collapse
You all need to re install miui rom to fix it. I'm having sony sensor, and it fixed it.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
Requirements:
- oreo bootloader
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm64 8.1)
- Root not included. Flash magisk before first start.
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
gps
bt audio
stuff, I haven't checked
I broke my tablet. There are no more updates here further.
Download:
T820: https://drive.google.com/open?id=1ql4VIjTsSHNwzsoJm3Yb8wt0RW9OJerE
Device initial config sources:
https://github.com/bonuzzz
I was about to sell tablet...and get pixil c. Tablet is extremely laggy on stock Oreo. Switched back to your lineage 14.1 build which runs well but realized it was no longer supported. Very happy with your work! Thanks!
I'll give it a go when I get home. Thanks for supporting our device!
I did switch off WiFi upon initial setup, didn't seem to be liking 5g. After setup I switched to 5g WiFi but it kept showing no internet. My other devices don't have this problem. Not a big deal, just giving a heads up. I switched to 2g WiFi and all is well. Wayyyy smoother than stock Oreo. Didn't test gps, I know you said it wasn't working. I don't use GPS on my tablet so no loss there. Thanks again!
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Cool! I will be installing this shortly. I was going to switch the the tweaked stock Oreo but will much rather use Lineage since I prefer more of a "vanilla Android" over Samsung's version.
P.S. I recently got myself a pixelbook for chromeos+android+linux and I find myself using that way more than my tab s3. If you need anyone to test something that doesn't really care about stability, let me know!
Edit:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Thanks so much for this. I've been wanting to get an Oreo ROM like this for my S3
EDIT: Is there any chance you could just give a dump of your terminal session of the build? I had started to try & build 15.1 for the S3 WiFi, based on your work for the LTE version, but wasn't having any luck. I'm hoping that if you could provide a terminal dump, it could help me work through my issues to get the build working as well. Would appreciate it =]
Regardless, thanks for taking the time to build this for us WiFi owners! =D
Finally, T820! Have been waiting for this for months now. Gonna give this ROM a try ASAP :laugh:
Thank you so much for this! Testing this weekend.
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
Did you test the spen by any chance?
VVombat said:
Thank you so much for this! Testing this weekend.
Did you test the spen by any chance?
Click to expand...
Click to collapse
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
PuDLeZ said:
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
Click to expand...
Click to collapse
Mhm I'm using mainly Squid and Xodo to annotate and notate stuff. If you have them laying around anyways that would be nice, but if not no need to install and waste your time if I'll install tomorrow anyways. Thank you for your answer!
lineage-15.1-20180614-UNOFFICIAL-gts3lwifi doesn't work for me, bootloops, tried almost everything, etc.
RESOLVED: See below how and why.
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Hello, how to get Bluetooth working? I connect but no sound
Thank you also
Another problem, the sound slows down and stutters in applications (heavy or simple games)
JWnSC said:
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Click to expand...
Click to collapse
edited, thanks
yes, bt audio doesn't work. seems I broke it in last moment...
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
I have official keyboard case too. Unfortunately it's almost unusable in aosp if you need more than one keylayout. What about special keys, aosp doesn't have that triggers what stock rom has. I only could advice 3rd party app, but paid https://forum.xda-developers.com/showthread.php?t=1541916
HardWorker79 said:
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Click to expand...
Click to collapse
Nothing will change with official status except It would create more troubles and bureaucracy there.
Nobody will help. Believe me.
Comses said:
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Click to expand...
Click to collapse
I have an issue somewhere in audio behavior. Will check it deeper.
Comses said:
Another problem, the sound slows down and stutters in applications (heavy or simple games)
Click to expand...
Click to collapse
in games only? I've not noticed anything in videos.
samsuffit said:
Doesn't work for me.
What I did from Lineage 14.1:
- Upgraded TWRP to v3.2.1.1
- Wiped eveything
- Downloaded BRE2 firmware for my country
- Extracted BL....tar.md5 and flashed it with Odin v3.13.1
- Rebooted in recovery mode to be sure of... still don't know what
- Flashed Lineage 15.1
Then I could see the logo animation until the end, just before the system starts, then 3 boot loops and it went to recovery mode
I repeated the exact same sequence and flashed SuperSU v2.82-SR5, same result.
So...:
- Wipe everything
- Flash BL, CSC and CSC_HOME (no need of AP, system partition) with Odin
- Format/Erase Data
- Flash Lineage 15.1
Again a boot loop, this time without going back automaticaly to recovery mode.
Tried with SuperSU, boot loop...
So... This time I flashed eveything, reboot with Samsung Android, test a little bit, then:
- Flash TWRP v3.2.1.1
- Immediatly reboot to recovery mode
- Format/Erase Data
- Wipe everything
- Flash Lineage 15.1
Boot loop...
Tried with SuperSU, boot loop...
I was able to restore a full backup of my previous Lineage 14.1 installation.
What did I do wrong and which kind of logs do you need to help me to understand?
Thank you and thank you to have integrated S-Pen support, I love this thing. I don't realy need GPS.
Edit: in case it was mandatory I tried with Magisk v16.0 and v16.4 instead of SuperSU. Same boot loop.
If it's because I didn't flash the GAPPS, well... nevermind... I'll wait for something else.
Click to expand...
Click to collapse
Magisk is needed for device certification in Play store. That's because it should be flashed with gapps before first boot. So, rom works without gapps and root well.
For what region you downloaded oreo stock rom? I doubt but maybe samsung has different logic in bootloader for relocatable kernel stuff. It's strange how you restored lineage nougat, because that kernel shouldn't work with oreo bootloader.
edit: i'm wrong about bootloader and nougat, because I use now old twrp with nougat kernel.
Flashed old build. Have audio in bt, but don't have speaker rotation. I was sure it worked before...
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Hello @bonuzzz, thank you for the reply.
I was able to restore my Lineage 14.1 because I flashed the ARA2 boot loader (tried with Odin the first time, then with my TWRP backup, same result)
bonuzzz said:
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Click to expand...
Click to collapse
Only with VLC. Stuck in portrait mode with stock player. I don't have any games...
The last thing I need to try is installing the GAPPS... Like I said, I don't want to, so if the problem comes from this, I'll pass. But I have to try to be sure...
In this order from TWRP:
- Flash BRE2 boot loader
- Format Data and wipe everything
- Flash Lineage 15.1
- Flash openGAPPS nano arm64 8.1
- Flash Magisk 16.4
And... It's working...
Well...
I want to cry...
So the GAPPS are mandatory.
Thank you for creating a new os for sm-t820.
BT audio is working for me with Sony mdr zx220bt headphones
My phone is OnePlus 7T Pro HD1913 EU version. I have recently had a problem with auto-rotating the screen. I tested on the system versions 10.0.7, 10.0.13, 10.0.14, 11.0.5.1, 11.0.6.1, 11.0.7.1 and I have the auto turning upside down every time. I was flashing in different ways (OTA, fastboot, MSM) nothing helps. Full wipe downgrade versions don't help either. The same is true after installing a custom rom. Only when I install closed beta Hydrogen OS 12, auto-rotation works properly. Can someone advise me something?
same issue, I'm on latest Android 11 build after I downgraded from color os 12.1
I also think that it happened after testing the Chinese 12 system. The strangest thing is that when I reinstalled this closed beta 12, it has no problem with proper screen rotation. I tried to calibrate the sensors in the service menu, unfortunately it did not help.
I am facing the same issue. It doesn't bother me when I am portrait mode. When I go to landscape mode, it just reverse my screen up. I try to find solutions but no one I found nothing. If anyone found something please help me with that.
I am also facing the same issue.
Youtuber Techibee has found a way to fix it. He will be uploading his video soon.
https://youtube.com/c/ashokmor007TechiBee
Hope it fixes soon.
here is the link he uploaded the video hope it may help you also.
i tried myself it fixed the auto rotate issue.
Atharvaisbadhir said:
I am also facing the same issue.
Youtuber Techibee has found a way to fix it. He will be uploading his video soon.
https://youtube.com/c/ashokmor007TechiBee
Click to expand...
Click to collapse
Thank you very much. Before this fix was released, I previously flash persist.img from another phone (I didn't make a copy of the my original persist.img). All sensors are working properly, but the fingerprint is not working. I will probably not fix it anymore without sending it to the service.
kemoti said:
Thank you very much. Before this fix was released, I previously flash persist.img from another phone (I didn't make a copy of the my original persist.img). All sensors are working properly, but the fingerprint is not working. I will probably not fix it anymore without sending it to the service.
Click to expand...
Click to collapse
Yeah flashing someone’s else persist breaks your fingerprint functionality and your widevine certificate.
i think you should send it to service centre.