Today I unlocked bootloaded, no prob.
Installed twrp (twrp-3.4.0-0-sofia-test9.img), ok.
Had some trouble, twrp asked for pw. Solved it with 'fastboot -w' for wiping data.
Then I tried to flash LineageOS. (lineage-18.1-20220529-UNOFFICIAL-sofiar.zip)
The process stopped in the middle I believe and black screen.
Still black screen. I hve tried volDown+power and volUp+power, but still black.
When I connect to a WinPC I hea the sound "device inserted" And when I hold power butten I hear the sound "device removed."
So, what do you think gyus, anyone have a suggestion on this, would be grateful.
Related
Hello everyone, this is my first post here, so thanks if someone could help me,
Ok, I was running android MM rooted and had some problems with xposed, so I tried to enter in recovery to reflash xposed, but I wasn't able. I tried to enter directly through adb command (adb reboot recovery), but it would just normal boot.
So I tried to reflash NUT's dual recover. The device booted and entered in bootloop. Next, I tried to enter bootloader, but I just get a blank screen with a blue LED displaying.
Then, I tried flashtool, my device doesn't even show and it just ask me to reconnect it. It doesn't show on 'adb devices' command and 'fastboot devices', too. I tried a hard reset through the red button inside the SIM card slot, but nothing happened.
To sum up
- No recovery
- No bootloader
- No adb/fastboot commands
- No Flashtool
Did I just brick my phone?
Can someone give me another option to try to fix this?
Thanks in advance
Hello,
Nut's Recovery is not for marshmallow, that is why you encountered the above problem. However it wont brick your phone.
Can you describe how are you using flashtool and which version?
remember that to start your phone in flashmode you must power off the phone then you need to Press Volume down button and then insert usb in phone
michel090428 said:
Hello,
Nut's Recovery is not for marshmallow, that is why you encountered the above problem. However it wont brick your phone.
Can you describe how are you using flashtool and which version?
remember that to start your phone in flashmode you must power off the phone then you need to Press Volume down button and then insert usb in phone
Click to expand...
Click to collapse
Ok, my device is finally showed in fastboot on my work desktop, but still with a blank screen.
What should I do now? Since I can't charge it, it just powered off because the battery keeps dying.
EDIT: Ok, I finally did it!! But when it goes to the first config screen I get a msg window. Something along the lines, "android process acore stopped", "contacts stopped" and reboots. What now?
EDIT 2: Reflashed kitkat wipping logs and apps. All cool and dandy now.
havocfudge said:
Ok, my device is finally showed in fastboot on my work desktop, but still with a blank screen.
What should I do now? Since I can't charge it, it just powered off because the battery keeps dying.
EDIT: Ok, I finally did it!! But when it goes to the first config screen I get a msg window. Something along the lines, "android process acore stopped", "contacts stopped" and reboots. What now?
EDIT 2: Reflashed kitkat wipping logs and apps. All cool and dandy now.
Click to expand...
Click to collapse
great, nice to hear that
Hi,
I'm having problems with my great Lumix phone, stuck in a bootloop. I got it in to ADB mode using this a thread: on another site, but cannot get further. Maybe my phone was in MTP before it got stuck in the bootloop. It definitely is running in developer mode. I am on 5.0.2 and the problem started when deinstalling Kingroot via Super Sume Pro
Does anyone know how to solve this problem? Is there a regular factory reset mode, I can't find a keycombination that will start the factory reset other than the one in the thread. If not, does anyone know how to change the mtp to adb mode?
I hope someone out there does know the answer....
ArjanC5Zip said:
Hi,
I'm having problems with my great Lumix phone, stuck in a bootloop. I got it in to ADB mode using this a thread: on another site, but cannot get further. Maybe my phone was in MTP before it got stuck in the bootloop. It definitely is running in developer mode. I am on 5.0.2 and the problem started when deinstalling Kingroot via Super Sume Pro
Does anyone know how to solve this problem? Is there a regular factory reset mode, I can't find a keycombination that will start the factory reset other than the one in the thread. If not, does anyone know how to change the mtp to adb mode?
I hope someone out there does know the answer....
Click to expand...
Click to collapse
Try the power button + volume up
And see if that boots it into recovery.
MigoMujahid said:
Try the power button + volume up
And see if that boots it into recovery.
Click to expand...
Click to collapse
Just tried, but does not go into recovery, just Lumix repeating itself. (I let go of the buttons as soon as the "starting system" was shown.
ArjanC5Zip said:
Just tried, but does not go into recovery, just Lumix repeating itself. (I let go of the buttons as soon as the "starting system" was shown.
Click to expand...
Click to collapse
Try letting go the power button only when the "lumix logo" appear, and keep holding the volume button.
unfortunately, that does not work either. I noticed that the Lumix logo only apears on the second loop; i.e: first it starts with a screen powerd by Android twice, after the second it goes to Starting system and then Lumix. Maybe that does give you/someone a clue?
ArjanC5Zip said:
unfortunately, that does not work either. I noticed that the Lumix logo only apears on the second loop; i.e: first it starts with a screen powerd by Android twice, after the second it goes to Starting system and then Lumix. Maybe that does give you/someone a clue?
Click to expand...
Click to collapse
I thought that lumix logo is the first thing that shows app.
In that case you need to let go the power button when you see the "powered by android" logo, and keep holding the volume button.
In short, release on the first thing that show up, no matter what it is..lumix logo..android logo..etc
MigoMujahid said:
I thought that lumix logo is the first thing that shows app.
In that case you need to let go the power button when you see the "powered by android" logo, and keep holding the volume button.
In short, release on the first thing that show up, no matter what it is..lumix logo..android logo..etc
Click to expand...
Click to collapse
Tnx again, but no, I'm sorry, that does not do the trick. Stays in the bootloop, no recovery choices in this way.
ArjanC5Zip said:
Tnx again, but no, I'm sorry, that does not do the trick. Stays in the bootloop, no recovery choices in this way.
Click to expand...
Click to collapse
Ok, last thing to suggest is to search google for:
"(your model number) recovery mode"
Or any other suggestions that comes in your mind, i tried doing that but "Lumix phone" didn't come out with anything related because it's not accurate.
ArjanC5Zip said:
Tnx again, but no, I'm sorry, that does not do the trick. Stays in the bootloop, no recovery choices in this way.
Click to expand...
Click to collapse
Hello mate, I have the same bootloop issue after uninstalling KingRoot. Did you fix your phone somehow?
I'm in the same boat - stuck in boot loop at "Lumix" logo. I tried Power + Volume Up/Down to no vail.
Hello, world! This is my first time posting on the forums, so I'd appreciate grace where it's due, haha. Anyhow, onto my problem. I have an LG K20 V (model # VS501) with bootloader locked and unrooted. I've been able to boot into recovery by simply running
Code:
adb reboot recovery
but the recovery menu never appears, only the android on its back and the words "No Command". I've read up somewhat on the error but no combination of the volume keys and power button (my device doesn't have a physical home button) seems to ever put me through to the actual recovery menu, only booting the phone up normally or no results. I have read a few places that it could be an issue with the cache (no idea how), so would simply wiping the cache fix it? The internet is sparse on info on my specific device and I've always found the answers I'm looking for on XDA so I'm hoping I'll get one for this problem as well. Thanks in advance!
after pressing the keys:there is a blue screen which shows a killed android and an error signal and says no command?if yes you just have to wait and it will go to recovery mode after a bit
paranoic(d) said:
after pressing the keys:there is a blue screen which shows a killed android and an error signal and says no command?if yes you just have to wait and it will go to recovery mode after a bit
Click to expand...
Click to collapse
Not blue, a black screen. And I don't get to recovery by pressing keys, in fact I've tried and I cant. Only with the adb command. Or are you saying I just need to wait a while longer after pressing the key combinations to get past the error?
well.lg phones are secure so i dont really know from them :/.i have used only sony and samsung devices
Hello, I registered here in XDA to only ask a question.
I have a phone (Hyundai e501) that's bugged in the no command screen.
My aunt gave me the phone with the description of 'just fix it'. My guess is that the ROM is corrupted so I tried to flash a new one (if that's how it's called).
I saw a YouTube tutorial and got pretty far until it said that the phone has no space.
So my question is: how can I factory reset / format the phone without starting it? I tried to use the recovery menu but it automatically says 'No command', even when I'm not trying to get to the recovery menu.
I tried the combination of buttons that said to get to the 'No command' screen with the power and vol up button pressed and then click and unclick vol up button and it didn't work.
Is there a program that could help me? If there's not it could be a hardware issue? Thanks!
Hi everyone,
Looking for some help on my phone which is the only one I have unfortunately
So basically the Honor 9 is showing only the logo then just a black screen. One time it vibrated afterwards when pressing the volume buttons and made the camera sound. So it seems it might have booted but nothing is showing?
Phone did fall before, but worked afterwards.
I cannot access Emui recovery (when pressing volume up+power, it just shows the logo and black screen), but I can access fastboot.
If I plug it to charge, it shows the charging logo fine.
Bootloader is not unlocked. Nothing custom has been installed.
I already tried Hisuite recovery mode, but it said the device is not supported.
Any advice on what I could try? I searched the forums but couldn't figure out what to do. Any suggestion would be much appreciated.
Thank you!
bleepop said:
Hi everyone,
Looking for some help on my phone which is the only one I have unfortunately
So basically the Honor 9 is showing only the logo then just a black screen. One time it vibrated afterwards when pressing the volume buttons and made the camera sound. So it seems it might have booted but nothing is showing?
Phone did fall before, but worked afterwards.
I cannot access Emui recovery (when pressing volume up+power, it just shows the logo and black screen), but I can access fastboot.
If I plug it to charge, it shows the charging logo fine.
Bootloader is not unlocked. Nothing custom has been installed.
I already tried Hisuite recovery mode, but it said the device is not supported.
Any advice on what I could try? I searched the forums but couldn't figure out what to do. Any suggestion would be much appreciated.
Thank you!
Click to expand...
Click to collapse
Hello.
I know it is close to a year now, but just in case there is someone else out there looking to solve something like this. Just make sure to have a wifi connection through which you can download your firmware and recovery through the eRecovery panel. The downloads should be around a total of 4GB, so bear that in mind.
When you are set with your wifi access do the following (feedback will be appreciated):
- plug your phone to your computer and hold down the vol up + power button to boot into eRecovery
- in the eRecovery panel, choose to download firmware and recovery and it will launch a wifi connection
- connect to your wifi
- download the firmware and recovery accordingly
- once completed, you can proceed to update/upgrade (basically to install) it via the eRecovery
- once the upgrade/update/installations are complete, you can reboot.
- just know that everything on your device will be lost - full system and sdcard wipe will be made.
I hope you find the above helpful for you.