Hello guys. I recently lost my LG G8x ThinQ after my SD card got corrupted just before installing a CUSTOM ROM, so far so good, but the problem started when I went to troubleshoot the corrupted SD card, removed, formatted and put everything back there, but for TWRP to read the SD Card I would have to reset it, so that's where the problem started. By the time it rebooted, TWRP was gone, and since I still didn't have any system installed, it had nowhere to start, but entered the "Fastboot Mode" I had installed when the BOOTLOADER was unlocked. The problem is that it doesn't communicate with the PC, it doesn't go into EDL and Download, so I don't know how to get it back. Someone help me please.
EDL would be your only option for that, try it again because it can be tricky to enter, but to enter it consistently (about 70% of the time) try this:
1) Hold Power and Volume Down.
2) When the phone screen goes black keep holding Power and Volume Down and inmediately press Volume UP, every 1/3 a second release Volume Up and press it again.
3) if the screen does not turn on and the PC detects a USB device release all buttons, you are in EDL Mode, if not try again.
if it doesnt enter EDL then probably you have a hardware issue,
((Player)) said:
EDL seria sua única opção para isso, tente novamente porque pode ser complicado entrar, mas para entrar de forma consistente (cerca de 70% do tempo) tente o seguinte:
1) Certifique-se de ligar e diminuir o volume.
2) Quando a tela do telefone ficar preta, mantenha pressionado Power e Volume Down e imediatamente pressione Volume UP, a cada 1/3 de segundo, solte o Volume Up e pressione novamente.
3) se a tela não ligar e o PC detectar um dispositivo USB solte todos os botões, você está no modo EDL, caso contrário, tente novamente.
se não entrar no EDL, provavelmente você tem um problema de hardware,
Click to expand...
Click to collapse
OK! I'll try, but I'm pretty sure he won't get in...
((Player)) said:
EDL would be your only option for that, try it again because it can be tricky to enter, but to enter it consistently (about 70% of the time) try this:
1) Hold Power and Volume Down.
2) When the phone screen goes black keep holding Power and Volume Down and inmediately press Volume UP, every 1/3 a second release Volume Up and press it again.
3) if the screen does not turn on and the PC detects a USB device release all buttons, you are in EDL Mode, if not try again.
if it doesnt enter EDL then probably you have a hardware issue,
Click to expand...
Click to collapse
After that? If I really managed to make the cell phone enter EDL, what would I do after that? Can you make stock rom in EDL mode?
ThePhanton said:
After that? If I really managed to make the cell phone enter EDL, what would I do after that? Can you make stock rom in EDL mode?
Click to expand...
Click to collapse
flash a stock abl_a and abl_b and you should be able to enter download mode to flash a stock rom.
((Player)) said:
flash um estoque abl_a e abl_b e você deve ser capaz de entrar no modo de download para piscar um estoque rom.
Click to expand...
Click to collapse
Aconteceu algo muito inesperado... o PC deu um sinal com ele naquela tela aí (arquivo em anexo) mas não reconheceu, tem como reconhecer? Algum driver ou algo do tipo?
ThePhanton said:
Aconteceu algo muito inesperado... o PC deu um sinal com ele naquela tela aí (arquivo em anexo) mas não reconheceu, tem como reconhecer? Algum driver ou algo do tipo?
Click to expand...
Click to collapse
Image from previous answer (file attached)
That is fastboot mode, on EDL mode you shouldn't get an image on screen, it will stay black but you will see a new device on your PC. also try to post everything in english, some details will be lost using google translate.
((Player)) said:
flash um estoque abl_a e abl_b e você deve ser capaz de entrar no modo de download para piscar um estoque rom.
Click to expand...
Click to collapse
Where do I find abl_a and abl_b stock?
you can use these ones
((Player)) said:
você pode usar esses
Click to expand...
Click to collapse
Thank you friend. If it works I'll reply here.
((Player)) said:
you can use these ones
Click to expand...
Click to collapse
I came across the following errors in the QFIL program (Errors in the attached file, in the STATUS tab)
Everything is ok, drivers installed, PC recognized the device and the cell phone entered EDL, but even so, it gives an error.
if you can try anyways, if you can't write partitions and the partition list gets empty, make sure there are no spaces on the file and its route. if that doesnt fix it you can try with a different USB cable or on a USB 2.0 port
((Player)) said:
se você puder tentar de qualquer maneira, se não conseguir gravar partições e a lista de partições ficar vazia, certifique-se de que não haja espaços no arquivo e em sua rota. se isso não resolver, você pode tentar com um cabo USB diferente ou em uma porta USB 2.0
Click to expand...
Click to collapse
Got it. I'll try here.
((Player)) said:
if you can try anyways, if you can't write partitions and the partition list gets empty, make sure there are no spaces on the file and its route. if that doesnt fix it you can try with a different USB cable or on a USB 2.0 port
Click to expand...
Click to collapse
I succeeded, but the effect of replacing the abl_a and abl_b files is not applied because the cell phone does not restart the EDL mode and the QFIL program is on standby, but the PC is identical to the device was disconnected and does not reconnect. I waited for more than 2 minutes and nothing...
((Player)) said:
if you can try anyways, if you can't write partitions and the partition list gets empty, make sure there are no spaces on the file and its route. if that doesnt fix it you can try with a different USB cable or on a USB 2.0 port
Click to expand...
Click to collapse
Should I change any settings?
ThePhanton said:
Should I change any settings?
Click to expand...
Click to collapse
no, you can use this guide to get yourself started, you only need to follow the A) steps and take notes with the B) step, you only wanna touch the abl_a and abl_b partitions, also be careful with every click you do.
ThePhanton said:
I succeeded, but the effect of replacing the abl_a and abl_b files is not applied because the cell phone does not restart the EDL mode and the QFIL program is on standby, but the PC is identical to the device was disconnected and does not reconnect. I waited for more than 2 minutes and nothing...
Click to expand...
Click to collapse
it applies when you choose the file, you can try and boot to download mode and see if it works
((Player)) said:
it applies when you choose the file, you can try and boot to download mode and see if it works
Click to expand...
Click to collapse
I give up... No matter how many times I rewrite the abl_a and abl_b partitions, it always reboots in "fastboot" mode. I followed your instructions step by step. Anyway thanks for the help. Does having the bootloader unlocked influence anything? It's just that I feel the warning messages that the bootloader is unlocked get in the way.
Related
Hello good afternoon. First sorry if posted in the wrong place, I found another place to do it: / sorry for the second broken English, I'm using a translator: s today I tried to update my phone to a rom forum here: http://forum.xda-developers. com / showthread.php? t = 1201116 I did the whole procedure correctly over the phone just hangs on the first Sony Ericsson written and never leave it. I can not access the xrecovery to restore the backup, I can not turn off your cell phone only by the battery. have tried at all over the place, I followed several tutorials and nothing to thaw. someone please help me? I'm desperate here: (
Thanks and apologies again.
---
Potuguês:
Olá boa tarde. primeiramente desculpe se postei no lugar errado, não achei outro lugar para fazer isso :/ segundo desculpa pelo pessímo inglês, estou usando tradutor :s hoje tentei atualizar meu celular para uma rom aqui dó fórum: http://forum.xda-developers.com/showthread.php?t=1201116 fiz todo o procedimento corretamente mais o celular trava na primeira logo escrito Sony ericsson e não sai mais disso. não consigo acessar o xrecovery para restaurar o backup, não consigo desligar o celular só pela bateria. já procurei em tudo quanto é lugar, segui vários tutoriais e nada de descongelar. alguém por favor me ajude? estou desesperado aqui
Obrigado e mais uma vez desculpas.
Your device is X10 Mini PRO, right? If yes, you have to use CWM Recovery, no xRecovery.
For the fix:
First download this: http://sony-ericsson-update-service.br.uptodown.com/
Install, make the updates, turn off your device, charge it for at least 50 to 60% (if you have slow internet conection, charge it up to 100%), and then follow the instructions (they are on the program but I'll write it anyway).
1. Turn off device, pick up your micro USB cable, connect it to your PC.
2. Holding the Back Button (Right one) connect the cable to the phone, and keep holding it until the screen on the program changes and the phone LED turns green.
3. Click OK, it will erase everything on the phone, SD Card and SIM Card will keep Ok. It will download the Android to your device (may take hours, the program itself have slow download, and with a possible slow internet conection...) and then it will install it. Remove the cable, and turn on the phone. the boot will take about 10 minutes, don't worry, if you done everything right.
Congrats, your phone is fixed. Now, to install Mini CM7 Pro:
Root: You know how to do this, right?
Ok, after rooted, go to configs -> aplications -> developement -> debugging (activate it)
Then, download this: http://forum.xda-developers.com/showthread.php?t=1257701
Done this, conect your phone to the PC and DON'T MOUNT THE SD CARD. Open the .bat or .exe, I can't remember.
It will ask you two things: If your phone is rooted (press Y and ENTER) and if you already have a recovery installed (press N and ENTER). Wait. Reboot, and enter in recovery, the same way you do with xRecovery.
Go to Mount and Storage, connect your phone to the PC, press volume up hardware button and Home when you reach Mount USB Storage, press Home button, on your PC, transfer the Mini CM7 Pro .zip file to the root of your SD Card. Wait until the transfer is complete, and press Unmount (Home button)on your phone. Press back button once, go to wipe data/factory reset, confirm. Go to advanced settings, clear dalvik cache, clear battery data, go to install zip from SD Card, Home button, volume down button once, in choice zip from SD Card, home button, and navigate using volume buttons to your .zip file. Choise the ROM file and wait. When it's done, do another factory reset, clear dalvik cache again, reboot, wait. If everything was done right, you should have CM7 on your phone.
Hope it helped, don't forget to press Thanks button. (Espero ter ajudado, não se esqueça de apertar o botão de Thanks abaixo do meu post).
Use o Tradutor se precisar, boa sorte
Como você é br vou postar em português mesmo
obrigado, deu certo! me livrou de ter que mandar pra assistência (já estava tudo certo rs)
Obrigado mesmo
Aproveitando, tentei instalar outra rom e ela não passa da tela de apresentação dela, ela fica carregando.... e nada.
http://forum.xda-developers.com/showthread.php?t=1272784 tentei esse e mais uma outra que não lembro.
O que pode ser?
Cara, escreva em ingles, ou pelo menos use ctrl c + ctrl v do tradutor, é contra as regras.
Anyway, do what I said in the second half of my earlier post, use CWM, Full Wipe, Dalvik Cache Wipe, Install ROM, full wipe again and dalvik cache wipe again. Then reboot, if the boot animation keeps on loop as the usual (not the phone restarting) for about 10 min and the appear, it worked.
Any problem, just ask. If I can help, I will try to make it.
Sent using Mini CM7 Pro by Paul
Personal and much regret that I come to ask for help, I bought my RAZR xt910 and after 20 days of use the Jelly Bean tried putting it, ja made many upgrades exchanges roms on android devices, namely first sailor'm not traveling.
is as follows, I have tried upgrade to jelly bean, and the device stuck at boot, did everything right, until then there beauty downloaded the rom it stok to ics 4.0.4 and spent the RSD lite it, it was beautiful, it was returned to the . After one week he discharged. put to load and when I woke up in the morning, he was on the screen with Fastboot mesangem error at boot, system, etc. and locked cdrom device.
Oh my headache started again spent the RDS lite, to my surprise, he did not want to complete the process, was giving error checking, always kept in the boot flash or mbm_signed, etc..
I entered the ADB and went fast boot, and deleted the cache. with the command fastboot erase cache fastboot erase userdata and.
again and spent the RDS Lite and nothing. these attempts was discharging the battery, now think the **** he gave.
with the message he batery low program.
I thought I'd send in assistance until the motorola but here in my city has authorized only collection station. then it would take about 30 to 40 days to settle and look there.
So I took courage to open the back cover of the device and recharge the battery. with the battery charged.
I started doing it again trying to recuparar rom him.
and without success. Now that is the ****. then deleted all the binary files to erase his memory any residue of the old flash I made earlier without success. following files and command that it efetuei:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Delete this file even after he was connected and responding to the command fastboot
but after I despluga usb it already was. He hung up and will not turn over, nor angry with prayer. and the computer does not recognize it anymore.
it recognizes only the OMAP4430 chip, and is detecting and disconnects after 3 seconds and back.
Personal'm desperate, do not know what else to do to recover the device, which a few days and bought expensive by the way.
Who can give me a force there to retrieve the device will definitely rewarding.
__________________________________________________________________
Pessoal e muito pesar que venho pedir uma ajuda, comprei meu RAZR xt910 e apos 20 dias de uso tentei colocar o Jelly bean nele, ja fiz muitas atualizações trocas de roms em aparelhos android, ou seja não sou marinheiro de primeira viajem.
é o seguinte, tentei atualizar para jelly bean, e a aparelho ficou preso no boot, fiz tudo direitinho, ate ai então beleza baixei a rom stok dele a ics 4.0.4 e passei o RSD lite nele, ficou beleza, voltou pra o que era. depois de uma semana, ele descarregou. coloquei pra carregar e quando acordei pela manha, ele estava na tela do Fastboot com a mesangem de erro no boot, system, cdrom device locked e etc.
Ai começou minha dor de cabeça, novamente passei o RDS lite, para minha surpresa, ele não queria mais concluir o processo, estava dando erro de verificação, sempre parava no flash do boot ou mbm_signed, etc.
Entrei no ADB e fui do fast boot, e apaguei os cache. com o comando fastboot erase cache e fastboot erase userdata.
e passei novamente o RDS LIte e nada. nessas tentativas a bateria foi descarregando, pense agora na merda que deu.
com a mensagem de batery low ele não programa.
Pensei em ate mandar na assistencia da motorola, mas aqui na minha cidade não tem autorizada, somente posto de coleta. então ia demorar uns 30 a 40 dias para resolverem e olhe lá.
Então tomei coragem para abrir a tampa traseira do aparelho e recarregar a bateria. com a bateria carregada.
fazendo isso comecei novamente a tentar recuparar a rom dele.
e sem sucesso. agora que vem a merda. então apaguei todos os arquivos binarios da memoria dele para apagar qualquer residuo do antigo flash que fiz anteriormente sem sucesso. segue os arquivos e comando que efetuei nele:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Apos mesmo deletar esse arquivos ele estava ligado e respondendo aos comando do fastboot
mas apos eu despluga-lo do usb ja era. ele desligou e não liga mais, nem com reza brava. e o computador não reconhece ele mais.
reconhece apenas o chip dele que o OMAP4430, e fica detectando e apos 3 segundo desconecta e volta.
Pessoal estou desesperado, não sei mais o que fazer para recuperar o aparelho, que a poucos dias comprei e caro por sinal.
quem poder me dar uma força ai para recuperar o aparelho com certeza vou recompensar.
Interesting, you cooked your first ROM but I can't find a link or I can't read.
blassom said:
Pessoal e muito pesar que venho pedir uma ajuda, comprei meu RAZR xt910 e apos 20 dias de uso tentei colocar o Jelly bean nele, ja fiz muitas atualizações trocas de roms em aparelhos android, ou seja não sou marinheiro de primeira viajem.
é o seguinte, tentei atualizar para jelly bean, e a aparelho ficou preso no boot, fiz tudo direitinho, ate ai então beleza baixei a rom stok dele a ics 4.0.4 e passei o RSD lite nele, ficou beleza, voltou pra o que era. depois de uma semana, ele descarregou. coloquei pra carregar e quando acordei pela manha, ele estava na tela do Fastboot com a mesangem de erro no boot, system, cdrom device locked e etc.
Ai começou minha dor de cabeça, novamente passei o RDS lite, para minha surpresa, ele não queria mais concluir o processo, estava dando erro de verificação, sempre parava no flash do boot ou mbm_signed, etc.
Entrei no ADB e fui do fast boot, e apaguei os cache. com o comando fastboot erase cache e fastboot erase userdata.
e passei novamente o RDS LIte e nada. nessas tentativas a bateria foi descarregando, pense agora na merda que deu.
com a mensagem de batery low ele não programa.
Pensei em ate mandar na assistencia da motorola, mas aqui na minha cidade não tem autorizada, somente posto de coleta. então ia demorar uns 30 a 40 dias para resolverem e olhe lá.
Então tomei coragem para abrir a tampa traseira do aparelho e recarregar a bateria. com a bateria carregada.
fazendo isso comecei novamente a tentar recuparar a rom dele.
e sem sucesso. agora que vem a merda. então apaguei todos os arquivos binarios da memoria dele para apagar qualquer residuo do antigo flash que fiz anteriormente sem sucesso. segue os arquivos e comando que efetuei nele:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Apos mesmo deletar esse arquivos ele estava ligado e respondendo aos comando do fastboot
mas apos eu despluga-lo do usb ja era. ele desligou e não liga mais, nem com reza brava. e o computador não reconhece ele mais.
reconhece apenas o chip dele que o OMAP4430, e fica detectando e apos 3 segundo desconecta e volta.
Pessoal estou desesperado, não sei mais o que fazer para recuperar o aparelho, que a poucos dias comprei e caro por sinal.
quem poder me dar uma força ai para recuperar o aparelho com certeza vou recompensar.
Click to expand...
Click to collapse
Do you realize that xda, specifically this section, is an international forum and english is the primary language? Talking portuguese will lead you nowhere.
You just digg your own grave when you deleted mbm.bin, mbmloader.bin, boot signed and disconnected the phone!!!
You should have reflashed at least, the boot loaders again. I think that you'll have to send it to Motorola, so they can fix with their propper tools.
p34c3m4k3r said:
Do you realize that xda, specifically this section, is an international forum and english is the primary language? Talking portuguese will lead you nowhere.
You just digg your own grave when you deleted mbm.bin, mbmloader.bin, boot signed and disconnected the phone!!!
You should have reflashed at least, the boot loaders again. I think that you'll have to send it to Motorola, so they can fix with their propper tools.
Click to expand...
Click to collapse
Personal and much regret that I come to ask for help, I bought my RAZR xt910 and after 20 days of use the Jelly Bean tried putting it, ja made many upgrades exchanges roms on android devices, namely first sailor'm not traveling.
is as follows, I have tried upgrade to jelly bean, and the device stuck at boot, did everything right, until then there beauty downloaded the rom it stok to ics 4.0.4 and spent the RSD lite it, it was beautiful, it was returned to the . After one week he discharged. put to load and when I woke up in the morning, he was on the screen with Fastboot mesangem error at boot, system, etc. and locked cdrom device.
Oh my headache started again spent the RDS lite, to my surprise, he did not want to complete the process, was giving error checking, always kept in the boot flash or mbm_signed, etc..
I entered the ADB and went fast boot, and deleted the cache. with the command fastboot erase cache fastboot erase userdata and.
again and spent the RDS Lite and nothing. these attempts was discharging the battery, now think the **** he gave.
with the message he batery low program.
I thought I'd send in assistance until the motorola but here in my city has authorized only collection station. then it would take about 30 to 40 days to settle and look there.
So I took courage to open the back cover of the device and recharge the battery. with the battery charged.
I started doing it again trying to recuparar rom him.
and without success. Now that is the ****. then deleted all the binary files to erase his memory any residue of the old flash I made earlier without success. following files and command that it efetuei:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Delete this file even after he was connected and responding to the command fastboot
but after I despluga usb it already was. He hung up and will not turn over, nor angry with prayer. and the computer does not recognize it anymore.
it recognizes only the OMAP4430 chip, and is detecting and disconnects after 3 seconds and back.
Personal'm desperate, do not know what else to do to recover the device, which a few days and bought expensive by the way.
Who can give me a force there to retrieve the device will definitely rewarding.
Haha I am sorry but the translation is hilarious
namely first sailor'm not traveling.
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh::victory::victory:
romdroid. said:
Haha I am sorry but the translation is hilarious
:laugh::laugh::laugh::laugh::victory::victory:
Click to expand...
Click to collapse
Help pleaseeeeeeeeeee
Im amazed....why did u delete all partitions?
I'm not sure if your phone will ever power on without boot loader and recovery partition...
Really....why u did that?:banghead:
And BTW.....you shouldn't post this here...
Enviado desde mi XT910 usando Tapatalk 2
Honestly, arranges for technical assistance. You really ****ed your device.
Try to send it back to Motorola assistance, i did bricked and disassembled an Atrix, brought it to assistance to quote for repair, after a month they sended back repaired free of charge.
blassom said:
it recognizes only the OMAP4430 chip, and is detecting and disconnects after 3 seconds and back.
Click to expand...
Click to collapse
This sounds like OMAP ROM Code.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
image from - http://omappedia.org/wiki/Bootloader_Project
Upon boot, OMAP ROM code will search for a 1st-stage bootloader.
Probably in these location order.
1. Internal Storage (NAND Loader)
2. Serial
3. SD Card
Since you've delete your NAND loader...CPU trying the next order
(at least give you 3 second to upload a bootloader via serial)
There's a chance we can load a custom boot loader from sd-card
p/s : someday when I don't need this phone.. I'll kill it this way
If I'm lucky, I'll get to boot an unlocked bootloader.
Help, please
Then I can put files in it's original stock rom to see if you can read the boot?
whirleyes said:
This sounds like OMAP ROM Code.
Upon boot, OMAP ROM code will search for a 1st-stage bootloader.
Probably in these location order.
1. Internal Storage (NAND Loader)
2. Serial
3. SD Card
Since you've delete your NAND loader...CPU trying the next order
(at least give you 3 second to upload a bootloader via serial)
There's a chance we can load a custom boot loader from sd-card
p/s : someday when I don't need this phone.. I'll kill it this way
If I'm lucky, I'll get to boot an unlocked bootloader.
Click to expand...
Click to collapse
Thanks a lot for the schematics & the technical insight. Maybe we can try something in this case..
:good:
blassom said:
Then I can put files in it's original stock rom to see if you can read the boot?
Click to expand...
Click to collapse
Dude, let's try something...
1- Grab a Micro-SD with at least 4GB
2- Format it to Fat32
3- Extract & copy all the files from the 672.180.41 SBF update to it.
4- Put it into the phone
5- Remove your SIM card
6- Plug the usb cable & connect to the PC.
7- Wait to see if it loads the MBM & try to flash again, using the same files that I mentioned earlier.
Did you understand? / Você entendeu?
what computer you have access?? linux?? or windows?
Yes
p34c3m4k3r said:
Thanks a lot for the schematics & the technical insight. Maybe we can try something in this case..
:good:
Dude, let's try something...
1- Grab a Micro-SD with at least 4GB
2- Format it to Fat32
3- Extract & copy all the files from the 672.180.41 SBF update to it.
4- Put it into the phone
5- Remove your SIM card
6- Plug the usb cable & connect to the PC.
7- Wait to see if it loads the MBM & try to flash again, using the same files that I mentioned earlier.
Did you understand? / Você entendeu?
Click to expand...
Click to collapse
Yes ok
Windowa
whirleyes said:
what computer you have access?? linux?? or windows?
Click to expand...
Click to collapse
Windows 8
Does "Yes ok" mean it worked or just that you will try?
I got very close to the stage you are; but reflashed with factory cable instead of deleting partitions. I did not have the balls to charge the battery directly.
Sent from my XT910 using xda premium
I'll try.
doutdes said:
Does "Yes ok" mean it worked or just that you will try?
I got very close to the stage you are; but reflashed with factory cable instead of deleting partitions. I did not have the balls to charge the battery directly.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I'll try.
what was the result ?
did you succeed ?
did you fix your phone ?
Exactly the same problem.
xtam said:
what was the result ?
did you succeed ?
did you fix your phone ?
Click to expand...
Click to collapse
I believe I have the same problem although it was caused by a wrong step during installing the d-wiz rom. I own a GSM XT910 device and I formatted my main system with the boot menu manager without having copied first the ROM zip in my device (yeah i know i'm an idiot)!
Then when i rebooted I was greeted by the motorola "red eye" logo and then... nothing (no fastboot menu appears or any other menu). Nevermind how many times I have tried to reboot by pressing either "power"+"vol up"+"vol down" or just "power"+"vol up" with or without the factory cable the result is exactly the same: the boot stops after the motorola logo.
I have tried several methods as well as the aforementioned:
(1- Grab a Micro-SD with at least 4GB
2- Format it to Fat32
3- Extract & copy all the files from the 672.180.41 SBF update to it.
4- Put it into the phone
5- Remove your SIM card
6- Plug the usb cable & connect to the PC.
7- Wait to see if it loads the MBM & try to flash again, using the same files that I mentioned earlier.),
but no luck. The problem remains the same.
I have also tried this: http://forum.xda-developers.com/showthread.php?t=2198223 , but had no luck either. The device couldn't boot into fastboot.
Any other ideas?
Proud to announce that the last thread (http://forum.xda-developers.com/showthread.php?t=2198223) solved my problem after multiple times of pressing "power"+"vol up"+"vol down" en=ven after the logo appears and following the steps.
Hello people..
Anyone know how to get root access to this device?
Didn't find any guide about it...
Any help would be appreciated.
Best regards
JRGOFICIAL said:
Hello people..
Anyone know how to get root access to this device?
Didn't find any guide about it...
Any help would be appreciated.
Best regards
Click to expand...
Click to collapse
I DO!!!
No scam frlfrl. Read this carefully. Any cv1 device including this one is eligible to root. It's an LG X210 also known as cv1. So it's firmware is the same but it's a different carrier. The LG Aristo 2, LG Aristo 2+, LG K8+, and the LG Pheonix 4 are all cv1. Previously it was thought that only LG Aristo 2, 2+ and K8+ were the only cv1 devices, but now thanks to AustinGarrick1818, we have now relized that our cv1 TWRP can be used for the LG Pheonix 4 and of cource your LG K9!
I will post a root method soon for all of the cv1 devices.
NonStickAtom785 said:
I DO!!!
No scam frlfrl. Read this carefully. Any cv1 device including this one is eligible to root. It's an LG X210 also known as cv1. So it's firmware is the same but it's a different carrier. The LG Aristo 2, LG Aristo 2+, LG K8+, and the LG Pheonix 4 are all cv1. Previously it was thought that only LG Aristo 2, 2+ and K8+ were the only cv1 devices, but now thanks to AustinGarrick1818, we have now relized that our cv1 TWRP can be used for the LG Pheonix 4 and of cource your LG K9!
I will post a root method soon for all of the cv1 devices.
Click to expand...
Click to collapse
Already posted the method? If you already, could you send me the link? I am very happy to know that there is someone working to bring a root method and the TWRP to the LG K9 TV, I am a long time ago for answers. thank you!
one more here waiting for this guide!
@NonStickAtom785 please give a shout here when it's avaiable
Thanks!
CalangOMudo said:
Already posted the method? If you already, could you send me the link? I am very happy to know that there is someone working to bring a root method and the TWRP to the LG K9 TV, I am a long time ago for answers. thank you!
Click to expand...
Click to collapse
baga13 said:
@NonStickAtom785 please give a shout here when it's avaiable
Thanks!
Click to expand...
Click to collapse
Well since I don't have the device I'm going to need testers to tell me if it works or not.
Method 1:
1. Developer Options
The bootloader should be locked, but you can OEM unlock it in developer settings. Most everyone should know how but just in case goto Settings -> About and find Build Number. Click it 5-6 times and Developer Options should show up in settings.
Goto Developer Option and enable OEM Unlock and usb debugging.
2. ADB Drivers
If you already have adb drivers on your computer just restart your device and plug it into your PC. Open a command prompt in you adb folder and type in "adb devices". If you don't you will need to install ADB Drivers from another forum and do the same as everyone else. You will need to give authorization to USB Debugging once you type in adb devices. If it shows unauthorized then type in adb reboot fastboot. This should prompt that debugging authorization on screen. Click Allow and you device should reboot to fastboot mode. If this doesn't work goto Method B(Bottom of Post)
3. Fastboot
Fastboot should and most likely will come with the ADB Drivers. Instead of using adb we use fastboot commands. So type in fastboot devices to check that your device is connected. If it shows that it is connected then you can move on to the next step.
4. OEM Unlock
From the command prompt type "fastboot oem unlock" or "fastboot flash unlock". This will erase you data but once it's done you will need to do it again because the userdata partition and cache will be encrypted. Type "fastboot erase userdata" and "fastboot erase cache". Move on to step 5 if it works. If this doesn't then go to Method B.
5. Installing TWRP
Download this and install it by typing "fastboot flash recovery TWRP-3.2.3.0-cv1.img". If it works type "fastboot reboot recovery".
Method 2
Note: This is what might have to happen for TWRP to be installed
1. Basic Information
The fastboot partition might be encrypted, adb might not reboot to fastboot, and or fastboot isn't install TWRP.
2. Fix(ANOTHER NOTE: I'M NOT RESPONSIBLE FOR BRICKS)
Power off your phone. Boot into download mode by holding the Volume UP and plugging the device into your PC. You'll need LG UP, to install the Aristo Firmware. Theoretically the cv1 devices are the exact same build as one another just under different carrier names
and build numbers. So flashing the LMX210MAK10 firmware should fix it. Download it and flash it then go back to method 1 to try again.
If you have any questions or comment quote my method and let me know further issues.
Alguém conseguiu?
Darlisson said:
Alguém conseguiu?
Click to expand...
Click to collapse
Fiz o que sugeriram sobre dar flash no lg k9 tv de uma rom supostamente compat
Funcionou?
But there are some problems: The LMX210BMW is the only build that supports dual SIM.
cssobral2013 said:
But there are some problems: The LMX210BMW is the only build that supports dual SIM.
Click to expand...
Click to collapse
Editing above: nevermind the above post. According to LG website, the only builds of LMX210 that support dual SIM are: BMW, EMW, IMW, NMW, and YMW. The BMW we know that the bootloader is hardlocked. So, we need to test which other LMX210 builds aren't hardlocked.
Alguém conseguiu?
CalangOMudo said:
Fiz o que sugeriram sobre dar flash no lg k9 tv de uma rom supostamente compat
Click to expand...
Click to collapse
Deu certo?
Alguém aqui conseguiu instalar alguma ROM, ou ao mesmo fazer o bootloader no K9?
baga13 said:
Deu certo?
Alguém aqui conseguiu instalar alguma ROM, ou ao mesmo fazer o bootloader no K9?
Click to expand...
Click to collapse
Comigo não rolou, definativamente desisti.Ainda teve varias pessoas relatando que não inicializa no bootloader.Acho que o problemas ta nesse modelo com dois chips. Nunca consegui iniciazar no bootloader, simplesmente reinicia voltando pro sistema.Quase perdi o aparelho fazendo o flash da imagem que foi postada, tive que instalar imagem stock pra poder voltar a usar o aparelho.
Também desencanei
rodrigo.ultrazone said:
Comigo não rolou, definativamente desisti.Ainda teve varias pessoas relatando que não inicializa no bootloader.Acho que o problemas ta nesse modelo com dois chips. Nunca consegui iniciazar no bootloader, simplesmente reinicia voltando pro sistema.Quase perdi o aparelho fazendo o flash da imagem que foi postada, tive que instalar imagem stock pra poder voltar a usar o aparelho.
Click to expand...
Click to collapse
Pois é, eu tb desencanei de perder tempo tentando acessar o bootloader.
Para mim era algo relacionado a um bloqueio colocado pela operadora que vendeu o aparelho (no meu caso, Vivo), mas não tenho conhecimento técnico para afirmar se é isso ou o lance dos dois chips...
Se alguém tiver sucesso no processo ou dicas, manda aqui!
https://dianariyanto.com/custom-rom-lg-k9-lineage-os-15-oreo/
Arquivos TWRP
rodrig0128 said:
https://dianariyanto.com/custom-rom-lg-k9-lineage-os-15-oreo/
Click to expand...
Click to collapse
Valeu pelo link, Rodrigo.
Porém os arquivos TWRP linkados na postagem dentro desta postagem estão indisponíveis.
Você conseguiu baixá-los?
São estes aqui:
unsigned_twrp_lg-k9_temp.zip
signed_twrp_lg-k9.zip
Estou googlando atrás deles, até agora sem sucesso.
Caso consiga, posto aqui.
Obrigado!
Any news?
about the root
cssobral2013 said:
Editing above: nevermind the above post. According to LG website, the only builds of LMX210 that support dual SIM are: BMW, EMW, IMW, NMW, and YMW. The BMW we know that the bootloader is hardlocked. So, we need to test which other LMX210 builds aren't hardlocked.
Click to expand...
Click to collapse
i've tested the YMW, and it's hardlocked too.
Hey guys, i really need some help.
My Zenfone 4 ZE554KL, yesterday he sudendly shut down and doenst start anymore, when i turn him on he start in a bootloop, and he stays in there forever, i cant enter recovery mode either, he just bootloops, what can i do? I need my phone, :´/
Pessoal, preciso de ajuda.
Meu Zenfone 4 ZE554KL, ontem ele desligou derrepente e não quer mais ligar, quando eu tento ligar ele, ele simplesmente entra em um bootloop e fica la pra sempre, e também não consigo entrar no modo recovery, alguém me ajuda, preciso do meu celular, :´/
Tries to put into download mode and reinstalls the system..
Tenta colocar em modo de download e reinstala o sistema
It's my problem too.
ZE554kl, no unlock bootloader "CSC FASTBOOT MODE", no recovery mode...
i don't remember which version is installed, but i think is WW-16.0620.1912.23
How can i put in download mode in this model?
I have the same problem...
Someone knows a solution ?
I got a phone with this same problem too. One possible solution I looked for is flashing a raw stock rom from csc fastboot mode, but it didn't work in my device. Here's the link in case it works for any of you:
https://www.getdroidtips.com/asus-zenfone-4-stock-firmware/
I need help! I tried to flash a gsi and it turned out that the phone didn't boot! twrp n opens! download mode doesn't open! odin and fastboot n recognize! pls help! pls help is my unique phone
!
vztorm said:
I need help! I tried to flash a gsi and it turned out that the phone didn't boot! twrp n opens! download mode doesn't open! odin and fastboot n recognize! pls help! pls help is my unique phone
!
Click to expand...
Click to collapse
Restore your backup from TWRP
bro, i'll help you, i've been through this problem, and you don't have to worry, let's solve ok? You will need a PC, as you said, your phone will not go into Download Mode, Let's Solve it, You will forcefully reboot your phone (Hold Power Button + Volume -, Hold for 7 Seconds) Your Phone Logo will appear , now do the following, Quickly, when your cellphone logo closes, connect the USB cable and wait, if your cellphone doesn't go into Download Mode, do the process again until you get it, and Good Luck!
[QUOTE = "AllanZL, postagem: 84529755, membro: 11340343"]
mano, vou te ajudar, ja passei por esse problema e nao precisa se preocupar, vamos resolver ok? Você vai precisar de um PC, como você disse, seu telefone não entrará no modo de download, vamos resolver, você forçará a reinicialização do telefone (mantenha pressionado o botão liga / desliga + Volume -, mantenha pressionado por 7 segundos) O logotipo do seu telefone aparecerá, agora faça a seguir, Rapidamente, quando o logotipo do seu celular fechar, conecte o cabo USB e espere, se o seu celular não entrar no Modo Download, repita o processo até conseguir, e Boa Sorte!
[/CITAR]
thanks man, thanks my phone is back!
Calm Down. I'll tell you how to get to the TWRP menu. Flashing to System Image doesn't totally brick the device.
Try the steps below :
1. Press the power + volume down button for 6 seconds.
2. Release both buttons after 6 seconds. Immediately press volume up + power button.
Remember to press Vol. Up + Power immediately after 6 seconds, don't wait for any vibration.
TWRP will boot up for sure if you didn't mess up your Boot image.
I have the solution bro,,, I had the same problem yesterday all I did is drain the battery,,, you should make your battery 0,,,, then hold the volume + & volume - at the same time and connect the phone to the PC , after that you will see the download mode,,, goodluck.