Hi.
Who can tell me if the S23 Ultra cable data transfer maximum speed was 480 mb/s or much more to pc or SSD?
Yes. It looks like it's still USB 2.0.
definitely 2.0 , I used a 3.0 usb drive and transfer speeds were slow
mittymak said:
definitely 2.0 , I used a 3.0 usb drive and transfer speeds were slow
Click to expand...
Click to collapse
But with cable which supports more than 480 mbs?
SUNUN said:
But with cable which supports more than 480 mbs?
Click to expand...
Click to collapse
All usb 3.2 gen2 goes up-to 10Gps
But i don't know the speeds of S23Ultra usb connect
And depending on what you connect to...
Nmc_alves® said:
All usb 3.2 gen2 goes up-to 10Gps
Click to expand...
Click to collapse
You mean that with that speed you have transfered data to or from phone to pc or SSD?
SUNUN said:
You mean that with that speed you have transfered data to or from phone to pc or SSD?
Click to expand...
Click to collapse
If the pc, phone, ssd... support it yes but up-to speed not all the time 10Gps
Nmc_alves® said:
If the pc, phone, ssd... support it yes but up-to speed not all the time 10Gps
Click to expand...
Click to collapse
In this case I'am asking maximum speed that tested for S23 Ultra in real data transfer
With my usb-c pen drive 12Gb data takes less tha 2-3mnts to transfer... 1000mbs speed rate usb-c pen
SUNUN said:
But with cable which supports more than 480 mbs?
Click to expand...
Click to collapse
Of course. I've tried all the cables. Original, USB 3.0, USB 4.0 - the maximum speed is still USB 2.0.
Nmc_alves® said:
With my usb-c pen drive 12Gb data takes less tha 2-3mnts to transfer... 1000mbs speed rate usb-c pen
Click to expand...
Click to collapse
That's very good. I get about 4gb per minute going from internal memory to a V30 rated SD card on my N10+.
Master255 said:
Of course. I've tried all the cables. Original, USB 3.0, USB 4.0 - the maximum speed is still USB 2.0.
Click to expand...
Click to collapse
SUNUN said:
Click to expand...
Click to collapse
He's wrong. He's incorrect.
SUNUN said:
Click to expand...
Click to collapse
Yes, I just tested it again. USB 3.0 speed is indeed supported. Via TB3+ wire.
Master255 said:
Of course. I've tried all the cables. Original, USB 3.0, USB 4.0 - the maximum speed is still USB 2.0.
Click to expand...
Click to collapse
Something wrong with your connection... on S22Ultra EXYNOS i has the same speed on this usb pen... no cable but direct to phone... on my pc surface 7pro with samsung usbc cable from 45w charger 5A i have the same speeds
Nmc_alves® said:
Something wrong with your connection... on S22Ultra EXYNOS i has the same speed on this usb pen... no cable but direct to phone... on my pc surface 7pro with samsung usbc cable from 45w charger 5A i have the same speeds
Click to expand...
Click to collapse
S23 Ultra cable data transfer maximum speed
Hi. Who can tell me if the S23 Ultra cable data transfer maximum speed was 480 mb/s or much more to pc or SSD?
forum.xda-developers.com
Master255 said:
Yes, I just tested it again. USB 3.0 speed is indeed supported. Via TB3+ wire.
Click to expand...
Click to collapse
I think we have on S23Ultra up to 5Gbs speeds... not sure
Nmc_alves® said:
I think we have on S23Ultra up to 5Gbs speeds... not sure
Click to expand...
Click to collapse
Yes. 5-10 Gigabits. That's still a lot less than all the other computers have 40 Gigabits. But it's just a phone. It probably doesn't need high speed.
On gsm arena they say USB-3.2
Samsung Galaxy S23 Ultra - Full phone specifications
www.google.com
Nmc_alves® said:
I think we have on S23Ultra up to 5Gbs speeds... not sure
Click to expand...
Click to collapse
Sir, can you send me a screenshot of the storage menu of your 1TB version? I am thinking to get a 1TB version for myself, I got my hands on a 512Gb one, curious about storage stats.
Related
Can you use standard mini usb leads / CHARGERS (Like the XDA EXEC or nokia data lead etc) ??
they look like they might fit, but not willing to try - has anyone??
Can they confirm one way or another!!
(I have solar battery chargers etc and wish to use them!)
also......
if you use the headphones socket AND the mini usb headphones, can they be programmed to recieve DIFFERENT feeds!?? (for mp3 DJ Mixing etc!)
Also could the mini usb socket be used as a LINE IN ????
And Finally does anyone know if the MULTI VIDEO adapter lead works with the HERO???
as that would be great!
;-)
God Bless, Kevin <><
ALSO..........
WHATS the LARGEST SD card available for HERO???? ;-)
Yes it would work. The difference between the mini usb is that it's 6 pins which can be use for charging and transferring files. The proprietary connector has 11 pins which is use, in addition to charging and transferring files, for video output. You can Google this too; my un-techie sister did this with her Mytouch lol. Sorry I can't answer the other questions cause I haven't bought the Hero yet (waiting for a price drop >.<)
Can't give you any answers over the sound question's but I do know
you can charge your phone with mini usb, I often use my camera cable when
i'm on the road, leaving the charger at home so I can't lose it.
doublepost sry
scooter42 said:
WHATS the LARGEST SD card available for HERO?
Click to expand...
Click to collapse
The current largest I'm aware of that WILL work is 16MB - 32MB cards are now coming onto the market and these should work. If anyone knows...please speak up.
The current largest I'm aware of that WILL work is 16MB - 32MB cards are now coming onto the market and these should work. If anyone knows...please speak up.
Click to expand...
Click to collapse
i think u mean 16/32 GB! (that's a slight difference^^) and yes the hero can take up to 32GB micro SDHC cards
@JBNAquatics: The miniUSB has a 5pin layout! The 4 standart pins (+5V,Data+,Data-,GND) and a 5th pin to differentiate between Type A and B (A: pin4 is connected to GND; B: pin4 is not connected)
@scooter42: To answere your questions:
Can you use standard mini usb leads / CHARGERS
Click to expand...
Click to collapse
YES it should work just fine, you can charge even with a standart miniUSB cabel plugged into your PC (as long as your port delivers 500mA -> no passive hubs) BUT i noticed the charger delivered with my Hero got 1A output. therefore it should charge twice as fast with this one.
Just to be sure check the power supply u want to use, if it has 5V and 500ma to 1A output (i have seen some chargers with outputs around 3V don't think they would work)
if you use the headphones socket AND the mini usb headphones, can they be programmed to recieve DIFFERENT feeds!??
Click to expand...
Click to collapse
couldn't try it out cause mine came only with a 4pin 2.5mm jack headset.
Also could the mini usb socket be used as a LINE IN ????
Click to expand...
Click to collapse
YES, if you use something like this.
does anyone know if the MULTI VIDEO adapter lead works with the HERO???
Click to expand...
Click to collapse
that's where i'm not so sure. pin 1, 2 and 6 of the extUSB are designated for video-output but haven't seen it work on android so far. In the HTC shop I could only find a video cable for the Touch Pro2. No video cable listed under Hero.
MrBrown666 said:
i think u mean 16/32 GB! (that's a slight difference^^) and yes the hero can take up to 32GB micro SDHC cards
Click to expand...
Click to collapse
Oops! I did mean 16/32GB
Hello everyone, Im not sure if this topic has been discuss in detail or not, but I have managed to connect a spare 500gb hard drive to my note 3. Here is everything I used.
I upgraded my laptop to a Samsung 250gb SSD, which provided me with a spare HDD:
http://www.amazon.com/Samsung-MZ-7T...=1387366438&sr=8-2&keywords=samsung+250gb+ssd
It comes with a cable already in it (USB 2.0) so this next item is optional, A Apricorn USB 3.0 Transger cable:
http://www.amazon.com/Apricorn-Note...qid=1387366498&sr=8-1&keywords=apricorn+clone
And lastly, it needs to connect to the phone, so I picked up this USB 3.0 OTG cable:
http://www.amazon.com/White-Color-M...7366411&sr=8-3&keywords=galaxy+note+3+usb+otg
Now here is the steps I took.
Since my HDD still had stuff on it, and it was partitioned, I had to wipe it clean. I formatted the HDD on my computer first. I formatted it to exfat. Maybe another way will work but I'm not testing it. I then hooked up all the wires accordingly and plugged it into my phone. The N3 did not recognize the file format of the HDD so I re-formatted it to the N3 standard. After that, it is as simple as plug and play. I was even able to use the stock My Files app.
Note*** obviously the SSD is not a requirement, unfortunately, I am unable to test it as it has been in my computer for several months and I dont want to risk corrupting anything. It may work with the SSD as well, although I doubt it will reach the speeds it can on a computer.
I am not rooted and did not have to download anything extra for it.
Pics:
Cool. But curious as to why you would need a 500G HDD attached to the N3
unleashd said:
Cool. But curious as to why you would need a 500G HDD attached to the N3
Click to expand...
Click to collapse
You can use this powerful phone for other things like use it as a media center and connect the phone to your TV
tyvar1 said:
You can use this powerful phone for other things like use it as a media center and connect the phone to your TV
Click to expand...
Click to collapse
Hmm..Never thought of that :good:
Transfer movies and stuff back and forth. Also pictures, downloaded documents. Mostly my school work is backed up to it now so if Google drive fails. I'll still be safe :beer:
Sent from my SM-N900V using xda app-developers app
Can never have too much space
tyvar1 said:
You can use this powerful phone for other things like use it as a media center and connect the phone to your TV
Click to expand...
Click to collapse
This. We were using a variant setup, pushing the content via DLNA to our Xbox 360 (connected to a good ole 'dumb' tube TV). Quite enjoyable.
Damn I didnt even know you could do this
Has anyone found a way to pass through power with a splitter or something so while connecting the USB OTG cable you could still run the phone off of power without depleting the battery? I asked this same question in the Note 8 forum but no one found a way.
trillog said:
Damn I didnt even know you could do this
Click to expand...
Click to collapse
I'm sure it can be done. That would be ideal. I have the 10,000mah zero Lemmon battery set to notify me when it's available again. I'll look around for a spilter
Sent from my SM-N900V using xda app-developers app
what format was the hdd in exFAT or NTFS ?
I use the OTG dongle to hook up my 1TB drive and play movies and TV shows directly from the drive.
(Also works with the tablet)
I formatted it to exfat. I have a 1tb external also. But it's already formatted to ntfs. And it's full so I'm not going to risk losing a thing on it.
Sent from my SM-N900V using xda app-developers app
justin94 said:
Hello everyone, Im not sure if this topic has been discuss in detail or not, but I have managed to connect a spare 500gb hard drive to my note 3. Here is everything I used.
Click to expand...
Click to collapse
This is awesome! I have an otg on order from Amazon. I was hoping to use a Logitech wireless receiver for my mouse, and a large 3.0 usb when needed.
Sent from my SM-N900V using XDA Premium 4 mobile app
Do not remember where, maybe mono price, but have seen micro USB 2.0 to USB 'A' female splitters.
rEVOLVE said:
Has anyone found a way to pass through power with a splitter or something so while connecting the USB OTG cable you could still run the phone off of power without depleting the battery? I asked this same question in the Note 8 forum but no one found a way.
Click to expand...
Click to collapse
Because it's not supposed to work that way... The OTG cable puts your device in "host" mode... so it will use the phones power to run your HDD and kill the ability to charge... there are ways to get power to the HDD so you don't drain your device battery as much but the charging thing is a native function of OTG switching.
This is what i've been using... it has HDMI out ... microUSB 5v input to run the HDD... USB port for HDD or any other USB device... (using a wireless keyboard on it right now)... and card reader ports...
You can fake this thing into trying to charge the phone by plugging in the micro USB connection first and THEN plugging the hub into the phone with the microUSB power already on... then you see the charge notification in the status bar but it still doesn't charge the device... even with the samsung 2amp charger as a power supply... the battery still drains
What about wireless charging? I Don't have a wireless charger or battery cover to test this. But this may work
Sent from my SM-N900V using xda app-developers app
justin94 said:
What about wireless charging? I Don't have a wireless charger or battery cover to test this. But this may work
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
That actually is a good idea to try. I'm less optimistic about that as my previous experience with wireless charging has shown that it is less efficient t getting current to the phone as a wired connection and there are some things done on your phone that even when plugged to a 2A wired connection will still drain the battery.
What about the Smart dock? With 2 USB ports an HDMI and power in?
rEVOLVE said:
there are some things done on your phone that even when plugged to a 2A wired connection will still drain the battery.
Click to expand...
Click to collapse
That's the problem I'm running into... I'm running the HDMI/MHL/OTG hub... I got the HDMI out to my flat screen... OTG to a wireless keyboard... bluetooth mouse... When it all hooks up properly (you have to plug everything in the right order) the Note 3 screen shuts off and it runs as a proper CPU with output to the flat screen...but even with the samsung 2 amp charger plugged in I still lose about 1% battery every 5 minutes... better than running without the charger but that s$#t can't be good for the battery running that hard and charging at the same time AND losing the battle.
Okay, I've had some trouble in the past selecting USB OTG cables. I have 4 now. One for my old Galaxy Victory that I no longer have, one for my Nexus 10 I sold, one for my PadFone X, and one for my HTC m7 that works w/ the Z3 and Shield Tab. Are USB Y cables as finicky? Does anybody reccommend a particular one?
These have been reported to work on the nvidia geforce shield tablet forums:
http://www.amazon.com/gp/product/B00EJP5XR2/ref=oh_aui_detailpage_o00_s00
http://www.amazon.com/gp/product/B009YPYORM/ref=oh_aui_detailpage_o00_s00
edit: another one that's been reported to work:
http://www.amazon.com/gp/product/B00CXAC1ZW/ref=oh_aui_detailpage_o01_s00
debunk said:
These have been reported to work on the nvidia geforce shield tablet forums:
http://www.amazon.com/gp/product/B00EJP5XR2/ref=oh_aui_detailpage_o00_s00
http://www.amazon.com/gp/product/B009YPYORM/ref=oh_aui_detailpage_o00_s00
edit: another one that's been reported to work:
http://www.amazon.com/gp/product/B00CXAC1ZW/ref=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
Sweet. Thanks!
Sent from my SHIELD Tablet using XDA Free mobile app
debunk said:
These have been reported to work on the nvidia geforce shield tablet forums:
http://www.amazon.com/gp/product/B00EJP5XR2/ref=oh_aui_detailpage_o00_s00
http://www.amazon.com/gp/product/B009YPYORM/ref=oh_aui_detailpage_o00_s00
edit: another one that's been reported to work:
http://www.amazon.com/gp/product/B00CXAC1ZW/ref=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
Nice, I purchased both of those blind without any idea they were the right ones, I guess I will have some spares when they arrive.
I didn't even think about it too much, I've had a blessed existence when it comes to buying this stuff without any prior confirmation that it works (first S2 video on YouTube demonstrating USB OTG was mine).
would they work in combination with the ethernet adapter?
DeBoX said:
would they work in combination with the ethernet adapter?
Click to expand...
Click to collapse
They should, yes.
DeBoX said:
would they work in combination with the ethernet adapter?
Click to expand...
Click to collapse
That's specifically why Nvidia added this functionality, so that much at least should be a given.
NZtechfreak said:
That's specifically why Nvidia added this functionality, so that much at least should be a given.
Click to expand...
Click to collapse
What USB Ethernet adapters are you folks using?
Lokks said:
What USB Ethernet adapters are you folks using?
Click to expand...
Click to collapse
Pretty much anyone of those usb to ethernet adapters you find should work. I've tried with 2 of those MIC el cheapo adapters, works fine.
Thanks much appreciated
Of the ones I got, this one turned up first, works fine (although price has risen since I grabbed them).
Note that the charging input needs to be plugged in before the cable is plugged into the tablet.
I have trouble to find a store that ships those to Germany.
Amazon.de has one that looks identical, but pictures in webstores...
Also the description says it won't work simultaneously. But maybe that's just for your average phone...
HansWursT619 said:
I have trouble to find a store that ships those to Germany.
Amazon.de has one that looks identical, but pictures in webstores...
Also the description says it won't work simultaneously. But maybe that's just for your average phone...
Click to expand...
Click to collapse
It doesn't charge the tablet. Just powers the connected device to save battery . That's how OTG works.
Sent from my SHIELD Tablet using XDA Free mobile app
2.0 changelog:
USB Y-cable support
Charge your SHIELD Tablet when using Ethernet in Console Mode with a micro USB Host OTG Y Cable
Am i misreading this?
HansWursT619 said:
2.0 changelog:
USB Y-cable support
Charge your SHIELD Tablet when using Ethernet in Console Mode with a micro USB Host OTG Y Cable
Am i misreading this?
Click to expand...
Click to collapse
"Please note that the extra power goes into the peripheral device, not into the android device itself."
This is noted in the products description. I'd like to know what cable I would need to get to charge the nVidia Shield and also allow the use of a USB Ethernet adapter.
dibblebill said:
It doesn't charge the tablet. Just powers the connected device to save battery . That's how OTG works.
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
No, Nvidia's implementation charges the tablet. That is the express purpose of Nvidia's addition, to allow simultaneous charging of the tablet while streaming over ethernet.
Please bear in mind I am actually using such a cable myself, and have confirmed the tablet charges used this way.
NZtechfreak said:
No, Nvidia's implementation charges the tablet. That is the express purpose of Nvidia's addition, to allow simultaneous charging of the tablet while streaming over ethernet.
Please bear in mind I am actually using such a cable myself, and have confirmed the tablet charges used this way.
Click to expand...
Click to collapse
What cable are you using?
Do you use any otgy or a special one just for the shield?
bull1295 said:
What cable are you using?
Do you use any otgy or a special one just for the shield?
Click to expand...
Click to collapse
I linked to it at the top of this page, its just a regular USB OTG Y-cable, not specially made for the Shield.
NZtechfreak said:
I linked to it at the top of this page, its just a regular USB OTG Y-cable, not specially made for the Shield.
Click to expand...
Click to collapse
Any particular order I should be plugging it in? I don't charge using that cable
Edit: nvm I see. I got another one. *buy* Hopefully this one works. Mine doesn't.
I am a little bit confused, too.
1. Does this feature just works with Android 5 or also with 4.4.2?
2. Does this only work for ethernet adapters?
3. Does this only work in console mode? (would be strange)
I have this one from German amazon.de and tried it on 4.4.2 with a USB stick and a wireless 360 controller adapter. (non-console mode)
Either it charges the tablet or it recognizes the peripheral device, never both.
So is this a problem of the OS version, or of the used peripheral device, or of the OTG-Y cable?
Hello,
The XZ1 has a USB 3.1 C Connector right? Therefore it is capable of 5 Gbit/s (or 10?).
Within Windows 10 the tethered connection (Remote NDIS Compatible Device) is shown as a 425,9 Mbit/s Connection (Connected to a USB 3.0 ). Thats the same speed I am getting from a USB 2.0 Device.
Did I do or understand something wrong?
Thank you!
celeron1 said:
Hello,
The XZ1 has a USB 3.1 C Connector right? Therefore it is capable of 5 Gbit/s (or 10?).
Within Windows 10 the tethered connection (Remote NDIS Compatible Device) is shown as a 425,9 Mbit/s Connection (Connected to a USB 3.0 ). Thats the same speed I am getting from a USB 2.0 Device.
Did I do or understand something wrong?
Thank you!
Click to expand...
Click to collapse
While it's got the Type-C USB connector, it is not clear if the port actually supports USB3.0 or higher.
The chipset is capable of that, but not sure about Sony's implementation.
I haven't yet tried to find out due to my lack of Type-C USB3 cables.
The one they shipped with the phone is a cheap USB2 one.
4rz0 said:
While it's got the Type-C USB connector, it is not clear if the port actually supports USB3.0 or higher.
The chipset is capable of that, but not sure about Sony's implementation.
I haven't yet tried to find out due to my lack of Type-C USB3 cables.
The one they shipped with the phone is a cheap USB2 one.
Click to expand...
Click to collapse
According to Sonys website the connector is USB 3.1 gen 5. Which means up to 5gbit/s.
How to check if the cable is USB c to a 3.1/3 or 2 without "opening"?
celeron1 said:
According to Sonys website the connector is USB 3.1 gen 5. Which means up to 5gbit/s.
How to check if the cable is USB c to a 3.1/3 or 2 without "opening"?
Click to expand...
Click to collapse
Interesting, they omitted the USB version info on the Compact's technical data page.
USB 3.x cables are supposed to have blue plastic inside the Type A connector.
There's also 5 additional pins behind the 4 standard ones that one could see.
4rz0 said:
Interesting, they omitted the USB version info on the Compact's technical data page.
USB 3.x cables are supposed to have blue plastic inside the Type A connector.
There's also 5 additional pins behind the 4 standard ones that one could see.
Click to expand...
Click to collapse
Hm okay I also bought one cable which is supposed to have USB3 but it was from aliexpress so cant be sure. On the German page it is described as USB 3.1 while *5 explains that it is 3.1 gen 1 5gbit/s
FYI. I Bought a USB 3.0 Cable and now i get a 851,9Mbit/s connection (NDIS according to Windows).
celeron1 said:
FYI. I Bought a USB 3.0 Cable and now i get a 851,9Mbit/s connection (NDIS according to Windows).
Click to expand...
Click to collapse
Neat, thanks for the feedback!
That's hella fast, still waiting for my USB3 cable.
I've tried to connect the S10+ in a USB C hub with HDMI output (not Samsung DEX) to use it on a 34" 3440*1440 (UWQHD) ultrawide monitor.
For my surprise... it works!!! Yeah!!
One downside, at this resolution, refresh rate is 50Hz...
What usb-c hub were you using?
RustyFlanMan said:
What usb-c hub were you using?
Click to expand...
Click to collapse
Hi, I'm using a docking station for my laptop - 'HP USB-C dock C4' and it's working like a charm
Esiu83 said:
Hi, I'm using a docking station for my laptop - 'HP USB-C dock C4' and it's working like a charm
Click to expand...
Click to collapse
Hehe, I was hoping to hear what hub @geekoo89 was using.
Are you also able to obtain greater than 1080p resolution in dex mode using a non samsung usb-c hub? If so, would you mind posting what phone and monitor you are using and what resolution was available?
RustyFlanMan said:
Hehe, I was hoping to hear what hub @geekoo89 was using.
Are you also able to obtain greater than 1080p resolution in dex mode using a non samsung usb-c hub? If so, would you mind posting what phone and monitor you are using and what resolution was available?
Click to expand...
Click to collapse
Hi, Sorry for delay but XDA is not displaying correctly for me since last week (various browsers).
I dont have any 4K monitors unfortunately. Only Full HD