Related
Hi everyone,
I've recently messed up terribly on the Canadian model of this phone. The model # is KII-L05 and the problem is that I'm stuck on the logo screen when booting.
I was unable to flash a custom ROM properly and have no backups. I have TWRP 3.1.1-0 installed and have tried flashing cm12.1, cm-13.0, lineage-13.0 and lineage-14.1 with the proper gapps to no success. I also tried eRecovery (with a lot of trouble getting to it using the Vol+/- because it loads TWRP 99% of the time) but it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi.
I've run out of ideas so I'd appreciate some assistance in finding a solution either getting back to stock ROM(firmware?) or a custom ROM that supports this model.
If there's already an answer posted, please pass along the link as I've come up with nothing searching and following most of what's been said before.
Thanks,
You just have an option to restore the backup if someone can share it.
shashank1320 said:
You just have an option to restore the backup if someone can share it.
Click to expand...
Click to collapse
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
you should try both.
TWRP backup and dload method. any of them could work
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
shashank1320 said:
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
Click to expand...
Click to collapse
Your suggestions are noted.
I'll try my luck at waiting a while longer for someone with a backup until I go flashing more things.
Did you try flashing stock recovery then flashing via dload?
hassanjavaid8181 said:
Did you try flashing stock recovery then flashing via dload?
Click to expand...
Click to collapse
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Dominic987 said:
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Click to expand...
Click to collapse
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
hassanjavaid8181 said:
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
Click to expand...
Click to collapse
Dominic987 said:
... it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi. ...
Click to expand...
Click to collapse
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
Unfortunately there are no official firmware yet for this mate. I tried looking for you but couldn't get any. Its just OTA and not full firmware that could help you with dload.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
May be last option is to take it to Huawei service center they will fix it for you.
[DELETED]
Leaving this project permanently.
Any user with the name "RealEngineer" wouldn't be me. I can confirm that I won't be returning here or to any other forum.
Thank You
Hi, the rom was replaced successfully on C200, thank you to all the members for this great tutorial/hack and your efforts.
The BLE remote also works but there is huge drop in performance, like YouTube takes forever to load video, I could only see the first frame of the video and then crash, all other general browsing in the OS is also slow. I wonder what might be causing it ???
it works perfectly fine for d200 v2 and now i can use adb as well as sideload any app if i want
All thanks to u and team
also i can disable jio update service to prevent updating of my box
thanks
Priceless_Aloo said:
it works perfectly fine for d200 v2 and now i can use adb as well as sideload any app if i want
All thanks to u and team
also i can disable jio update service to prevent updating of my box
thanks
Click to expand...
Click to collapse
Which OS was installed, Stock or Mi Box, my device got flashed with Mi firmware
Gband001 said:
Which OS was installed, Stock or Mi Box, my device got flashed with Mi firmware
Click to expand...
Click to collapse
I followed till point no.12, on boot it started with Mi Rom, (I have C200 version) ?? Should it not happen?? I downloaded the files in your post
Gband001 said:
Which OS was installed, Stock or Mi Box, my device got flashed with Mi firmware
Click to expand...
Click to collapse
stock
just flash system.img of c200 again using same method till step 10
AND replace aidan sytem.img to system.img of c200 box
Priceless_Aloo said:
stock
just flash system.img of c200 again using same method till step 10
AND replace aidan sytem.img to system.img of c200 box
Click to expand...
Click to collapse
Thanks Aloo ji, u truly are priceless
After flash it. Does Netflix plays 4k hdr videos and other apps too? Can any one of you share video of after flash it how it works?
Amlogic tool is giving .dll file missing
actkid said:
After flash it. Does Netflix plays 4k hdr videos and other apps too? Can any one of you share video of after flash it how it works?
Click to expand...
Click to collapse
yes if u have supported tv
Yoolo said:
Amlogic tool is giving .dll file missing
Click to expand...
Click to collapse
download the dll and paste it into the folder to fix this error
priceless can you post a screenshot of the running the android version here.
Can we go back to the original rom when needed? Thye might not give the security deposit back on cancelling the connection with a sodeloaded stb.
Getting libusb0.dll error have installed worldcup driver using AMLogic driver installer.exe. Downloaded libusb0.dll from net and copied to amlogic folder but it dosen`t work. Using win 10 ver 21h1 64bit. Please provide guide with images it will be helpful.
Priceless_Aloo said:
download the dll and paste it into the folder to fix this error
Click to expand...
Click to collapse
I have downloaded the file and put it under system32 folder but still it is giving error kindly help
6)Open AMLBootloaderConsole.exe you will see a screen waiting for device and dll error continue with next step.
7)press and hold the reset button of the box using a pin and simultaneously insert the power plug.
u will hear sound from pc after about 10 sec then remove power from stb and repeat step 5,6,7,8,9... now dll error is gone but now ( update partition system system-aidan.img ) command downloading is suck in middle of process will update when is find a solution for this problem.
Hope someone will make video with complete guide.
RealEngineer said:
When it gets stuck,you need to select the cmd window and press enter. If it still gets stuck or if it fails then you need to remove and reconnect the usb and try flashing again. That is the only way. Everyone faces these errors, the solution is to just try again.
Click to expand...
Click to collapse
Thanks RealEngineer for the guide . Will post all details when successful love to help others.
vipin786 said:
Thanks RealEngineer for the guide . Will post all details when successful love to help others.
Click to expand...
Click to collapse
Usb is not detecting in file browser how to resolve this issue
Ken adams1232 said:
download apps using jio pages and install on settop box
Click to expand...
Click to collapse
Apps can only install before running system.img command, my usb is not detecting after 12th step we have to install apps in mi os and in that os usb is not able to detect kindly help if anyone know how to solve
Junaid Shafi said:
View attachment 5390105
Click to expand...
Click to collapse
What is meant by this
woops didn't put this in guides, sorry
This should work for any KDZ firmware of any LG Device, but figured I'd write this for the Wing, as so far, its the only LG phone I own and the one I'm most determined with
This is not a full Root Tutorial. This is a step in the correct direction though. These are the After-Steps, so bootloader unlock is still needed. Sorry
What You'll need
- KDZ Tools (see attachment -- virus total scan just because: https://www.virustotal.com/gui/file...zODc2ZTViOWQ1MTlmN2Q0NzFiMjI6MTYzNzgyMTYwNg==)
- Firmware KDZ file
- Magisk Manager installed on device that IS NOT your LG Wing (at least for me, explained below)
Instructions (video coming soon)
1.) Download KDZ Tools and extract them to a folder somewhere.
-- I usually make one on my external drive and drop stuff there, but desktop works too
2.) Download whatever firmware KDZ file you need
3.) Put that KDZ File in the same folder as the KDZ Tools
4.) Run "OneKeyExtraction.bat" and select Y if the KDZ is in the folder with this same file
5.) This takes A LONG WHILE and you need a good large bit of storage space available (50gb+) because the extraction goes raw format and some image files at first take up 20+GB as 1 file
6.) Once complete, you should have a folder named "F100X_usersigned_etc" ... open that to find your img firmware files. There's 31GB of IMG files here if its the Android 11 1020 KR FW
7.) Copy one of the boot.img to your device with Magisk Manager installed
-- The reason I stated on a different device, is that at least for me, Magisk Manager kept failing to patch on my LG Wing. When I put the boot.img on my OnePlus 7 Pro 5G, it patched just fine
8.) Open magisk manager, select Install, Select and Patch a File, select the Boot.img and patch it
9.) Once patched, that's a rooted boot.img, pull it off your device back to your computer and hold on to it for when we get a way to flash it and root the device!
root theory:
Interupting the LGUp flashing process of firmware when it gets to boot partitions to load custom boot.img's. How to do this exactly, not sure. If there's a way we can re-kdz these files from KDZ tool, that might work too
I can tell you right now, it wont work because the bootloader is locked. The hash of the patched boot.img on the phone won't match and you will get "Your device has failed a routine check, your phone is unbootable."
Sorry to debunk your theory. We need a firehose and a engineering bootloader.
Leronex_1 said:
I can tell you right now, it wont work because the bootloader is locked. The hash of the patched boot.img on the phone won't match and you will get "Your device has failed a routine check, your phone is unbootable."
Sorry to debunk your theory. We need a firehose and a engineering bootloader.
Click to expand...
Click to collapse
hey it was worth a shot
KaptinBoxxi said:
hey it was worth a shot
Click to expand...
Click to collapse
Sure need lg wing firehose , can help to find it??
Bahmale said:
Sure need lg wing firehose , can help to find it??
Click to expand...
Click to collapse
Don't even have a clue of where to look so I won't be looking for it
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
mercuris said:
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
Click to expand...
Click to collapse
you got a rare device then. I can't even load fastboot, just download mode for lgup.
mercuris said:
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
Click to expand...
Click to collapse
What model do you have? I.e. F100VM10i
Glad you got it working btw!
kaluna00 said:
What model do you have? I.e. F100VM10i
Glad you got it working btw!
Click to expand...
Click to collapse
screen shot in another section shows it was a verizon demo model by the looks of it. F100V
KaptinBoxxi said:
screen shot in another section shows it was a verizon demo model by the looks of it. F100V
Click to expand...
Click to collapse
This is from the Verizon model (non demo).
Also i accidentally added the software version earlier.
i accidentally delete some lg apps and the phone stuck in bootloop the other day so i restore the phone using lgup just selected the refurbished option, the phone restored still in unlocked bootloader mode
mercuris said:
i accidentally delete some lg apps and the phone stuck in bootloop the other day so i restore the phone using lgup just selected the refurbished option, the phone restored still in unlocked bootloader mode
Click to expand...
Click to collapse
Hi, are you willing to dump the bootloader from your phone? Because it looks like you have a development device, so it has an unlockable engineering bootloader that can be used to unlock other LG Wing and Velvet devices.
Wish39 said:
Hi, are you willing to dump the bootloader from your phone? Because it looks like you have a development device, so it has an unlockable engineering bootloader that can be used to unlock other LG Wing and Velvet devices.
Click to expand...
Click to collapse
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
mercuris said:
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
Click to expand...
Click to collapse
Others can help on our discord server, I'll admit I'm not well versed on dumping partitions through stuff like ADB.
https://discord.gg/Zw9Uk9DWE2
mercuris said:
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
Click to expand...
Click to collapse
You can also contact @Leronex_1 he can help you with dumping the bootloader
will do what i can to contribute, no problem
mercuris said:
will do what i can to contribute, no problem
Click to expand...
Click to collapse
Thanks, I recommend to join the Discord server though since me and Leronex are not always online on XDA, we are more active on Discord since its a live chat platform, not a forum like XDA. If you dont have a Discord account you can just create one.
If anyone else is reading this you are welcome to join the server as well.
Wish39 said:
Thanks, I recommend to join the Discord server though since me and Leronex are not always online on XDA, we are more active on Discord since its a live chat platform, not a forum like XDA. If you dont have a Discord account you can just create one.
If anyone else is reading this you are welcome to join the server as well.
Click to expand...
Click to collapse
will do
kaluna00 said:
This is from the Verizon model (non demo).
Also i accidentally added the software version earlier.
Click to expand...
Click to collapse
Reason I guessed demo device is because of the 0'd IMEI, but I guess as a dev device, 0'd imei is gonna be there too
Any progress on this? Sounded like you guys were making some good ground and then the thread went a little bit cold. No pressure. Just checking in. Thanks and Merry Christmas!
My Device was on firmware version RMX2202_11.C.15 GDPR, it wasnt the latest one and software update wasn't pushing the latest ota package for my device which is RMX2202_11.C.25 GDPR.
So, i decided to rollback to RUI2.0 and update again and that might solve the problem. i unlocked my bootloader, booted on twrp, flashed rollback "RMX2202_11.A.17 GDPR" package, wipe data, boot into system.
All good till now, software update pushed me 700MB ota package, i download and installed it. Device asks for reboot i rebooted my device , device went off. DEAD no sign of life. only EDL MODE.
no recovery, no bootloader, no vibrate , no bootloop , completely DEAD. Then i took it to realme service center, they tried to flash my device , they got some error they returned my phone and said we cant repair because your device is rejecting firmware.
i attached the msm tool error. (WCSM communication failed (WCSM code: 4009 SW version of this package is not found in WCSM.)
PLEASE HELP ME!
Try to Change A computer?
DestoryG said:
Try to Change A computer?
Click to expand...
Click to collapse
i tried from different computers. 4 5 may be
Can i try with your phone ?
xuanhoang1811 said:
Can i try with your phone ?
Click to expand...
Click to collapse
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
XxMinixX said:
View attachment 5766719
Click to expand...
Click to collapse
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
XxMinixX said:
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
Click to expand...
Click to collapse
i am able to update my phone to the latest ota. i can help you if you want
Ashim Adhikari said:
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
Click to expand...
Click to collapse
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
vlmapalo said:
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
Click to expand...
Click to collapse
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Ashim Adhikari said:
his website is https://www.kreatifintech.com/
Click to expand...
Click to collapse
paid service advertising, you have been reported
Ashim Adhikari said:
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Click to expand...
Click to collapse
All this thread maked for advertise some indian guys)))
Download: Link
Steps:
1. Only works on EDL mode.
2. Run script 0-8475_update_image_EDL_fh_loader.bat
3. Update Official OTA package in recovery or install UserRAW in bootloader
Thanks ASUS Taiwan, @EdwardWu6688 , and don't use it for commercial purposes or earn money from this.
Does the bootloader version change with updates? What ROM is this bootloader compatible with? What bootloader version is used in the file?
_ReBoot_ said:
Does the bootloader version change with updates? What ROM is this bootloader compatible with? What bootloader version is used in the file?
Click to expand...
Click to collapse
Support 32.2004.2004.84
Big thanks for sharing!
Just a stupid newbie question:
Assuming the phone is dead (no recovery/fastboot) but start in edl mode (with edl cable). With this i can bring it back to live even if i flashed a totaly wrong firmware (wrong device for example)?
I want to start play around with custom recoverys/roms if they are available but before i want to know a way out of the worst case.
Im a newbie and I bricked my device
Does this support
Versión WW-32.2030.2030.26
?????
gaby704 said:
Im a newbie and I bricked my device
Does this support
Versión WW-32.2030.2030.26
?????
Click to expand...
Click to collapse
After you install this unbrick fw, you will get back to 32.2004.2004.84 bootloader, so you most need install 32.2004.2004.84 user raw or adb sideload 32.2004.2004.84 fully OTA package.
Ok I'll try it once i get the edl cable. Thank you very much for replying
Hi,
My Z9 is in bootloop following complete Magisk 25 uninstall ...
Is EDL a way to recover my z9 or not ?
A HowTo please ?
how i enter edl mode
i have an edl 9008 cable but i cant figure out how to enter the edl mode.
i plug it in and nothing happens, i went to bootlader and plug it in an again nothing happens
help please
And it wont show up on the port section of qfil
zegoo said:
Hi,
My Z9 is in bootloop following complete Magisk 25 uninstall ...
Is EDL a way to recover my z9 or not ?
A HowTo please ?
Click to expand...
Click to collapse
You should flash with RAW, Only if fail with rom then you can try EDL
Latest RAW -WW-AI2202-32.2030.2030.26-MR1-2208-M2.13.33.16-ASUS_1.1.1-user-20220816.zip
UnBrick (EDL) -QMSCT_ForCSC_DefaultFuseLock_AI2202_SM8475_31.1902.1902.55.zip
gaby704 said:
And it wont show up on the port section of qfil
Click to expand...
Click to collapse
Get From ROMDevelopers : AI2202_Provision_and_Flash_device_SOP_CSC.pdf
Inside have full guide, including EDL Test point ( How to entry EDL ) Full Guide.
In the guide (AI2202_Provision_and_Flash_device_SOP_CSC.pdf) is only the testpoint method described. I thought an EDLCable does the same without disassembling the device?
The provision.bat initialize the filesystem and the update-image-edl.bat does the firmware flash. Is this right?
Thanks.
Test point mean EDL mode, Just Short two point and follow guide..!
You don't have to EDL cable...!
AzimBahar said:
You should flash with RAW, Only if fail with rom then you can try EDL
Latest RAW -WW-AI2202-32.2030.2030.26-MR1-2208-M2.13.33.16-ASUS_1.1.1-user-20220816.zip
Click to expand...
Click to collapse
Thanks but where to find this RAW firmware ?
I used once the RAW firmware for my Z8 and it was the right way.
zegoo said:
Thanks but where to find this RAW firmware ?
I used once the RAW firmware for my Z8 and it was the right way.
Click to expand...
Click to collapse
You can check in ROMDevelopers as they have huge collection with latest data
AzimBahar said:
You can check in ROMDevelopers as they have huge collection with latest data
Click to expand...
Click to collapse
I tried but i dont't have an account with dfp. How to make it possible ?
Another way to get your RAW FW file ?
AzimBahar said:
Test point mean EDL mode, Just Short two point and follow guide..!
You don't have to EDL cable...!
Click to expand...
Click to collapse
Yes, but it should also work with the cable so i dont have to open the device?
Hermann2306 said:
Yes, but it should also work with the cable so i dont have to open the device?
Click to expand...
Click to collapse
If phone goes to EDL mode using cable, then YES. Otherwise ‘NO’
AzimBahar said:
Get From ROMDevelopers : AI2202_Provision_and_Flash_device_SOP_CSC.pdf
Inside have full guide, including EDL Test point ( How to entry EDL ) Full Guide.
Click to expand...
Click to collapse
I paid to download it but have no regrets. Thank you so! much it flashed
And my device is unbriked and functioning.
I really appreciate it. I spend days trying to figure out how to unbrick the phone.
So thank you!