So I decided to go all out magsafe on my s23 ultra. After much trial and error with different products I think I came up with the perfect setup for myself. I love it because it's not too bulky and it doesn't look like a Frankenstein phone.
I love clear cases but I hated the clear magsafe cases available. Most of them had the white circle but I hated that with my phantom black phone. And the ones that had a black circle also had that line below that blocks part of the Samsung logo. So I ended up buying this magsafe adapter. (Unfortunately it's not on Amazon). It has built in magnets for a stronger hold and it's made of metal and has a nice finish.
Naztech MagUP MagSafe Magnetic Ring 2-Pack
https://www.groupon.com/deals/gg-mp-naztech-magup-magsafe-magnetic-ring-2-pack?utm_source=anonymous&utm_campaign=UserReferral_ma
I went with the OtterBox Prefix case. I love it because it has squared off sides instead of round.
OtterBox Prefix Series case for Galaxy S23 Ultra - Black Crystal (Clear/Black) https://a.co/d/255UmSJ
I ended up getting the magsafe ring holder grip for the back side of the phone. I love this because it allows me to stick my phone to metal surfaces because it has magnets on both sides. It can also be used as a kick stand because of the rotating ring. Has a nice feel and it looks nice!
andobil Magnetic Phone Grip for MagSafe [Drop Protection] Strong Magnetic Phone Ring Holder Compatible with MagSafe Cellphones & Accessories, iPhone 14 Plus 13 12, Pro, Pro Max, Mini, Silicone, Black https://a.co/d/cQx7KZL
Hope it inspires more Galaxy users and hopefully that makes Samsung start putting a version of magsafe in their phones.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm looking forward to ESR HaloLock ring and Ring Stand.
Anker 610 Ring Holder should work too.
Virgo_Guy said:
I'm looking forward to ESR HaloLock ring and Ring Stand.
Anker 610 Ring Holder should work too.
Click to expand...
Click to collapse
I had the esr. The shine goes away after about a week and it's not magnetic.
The ring stand didn't stick to metal surfaces, so that was a deal breaker for me.
mmafighter077 said:
Naztech MagUP MagSafe Magnetic Ring 2-Pack
https://www.groupon.com/deals/gg-mp-naztech-magup-magsafe-magnetic-ring-2-pack?utm_source=anonymous&utm_campaign=UserReferral_ma
Click to expand...
Click to collapse
How's the adhesive? What I don't nt like about all these rings(irrespective of any brand) is that these are not re-usable, meaning can't simply remove from one case and install in another case afaik.
Virgo_Guy said:
How's the adhesive? What I don't nt like about all these rings(irrespective of any brand) is that these are not re-usable, meaning can't simply remove from one case and install in another case afaik.
Click to expand...
Click to collapse
The adhesive is strong but I don't think it was meant to be reused. But hey the two pack is $13. So you'll have enough for 2 cases.
How's the s pen work for you?
I went down this road before and couldn't find anything that didn't interfere with the s pen in some way.
spart0n said:
How's the s pen work for you?
I went down this road before and couldn't find anything that didn't interfere with the s pen in some way.
Click to expand...
Click to collapse
No issues on this adapter.
mmafighter077 said:
No issues on this adapter.
Click to expand...
Click to collapse
Alright I've ordered the same magsafe magnet and the magnet holder. The onky difference in my set up vs yours is that I'm using a dbrand grip case and skin. I'm hoping the magnet ring fits okay under the case and doesn't stick out too far otherwise I'll be happy with everything
spart0n said:
Alright I've ordered the same magsafe magnet and the magnet holder. The onky difference in my set up vs yours is that I'm using a dbrand grip case and skin. I'm hoping the magnet ring fits okay under the case and doesn't stick out too far otherwise I'll be happy with everything
Click to expand...
Click to collapse
I don't know how well it will work underneath the case. I haven't heard too many positive things when people place it under the case. It's typically not that strong when you do it that way.
spart0n said:
How's the s pen work for you?
I went down this road before and couldn't find anything that didn't interfere with the s pen in some way.
Click to expand...
Click to collapse
Did some digging...looks like no matter which magsafe accessory is used more or less it affects the S-Pen, the stronger the magnetic "bond" the higher the interference is!
Virgo_Guy said:
Did some digging...looks like no matter which magsafe accessory is used more or less it affects the S-Pen, the stronger the magnetic "bond" the higher the interference is!
Click to expand...
Click to collapse
Not true. The one I have right now has no interference with my s pen. I'm using it right now. No issues. If there is interference it's not detectable at all.
As an update to my previous post, I just got the magsafe installed under my dbrand grip case and I can't even see a bulge or anything and it doesn't interfere with charging or s pen at all. But I don't have the metal finger holder thingy yet, it says it's out for delivery today so I'll report back after I get it.
mmafighter077 said:
So I decided to go all out magsafe on my s23 ultra. After much trial and error with different products I think I came up with the perfect setup for myself. I love it because it's not too bulky and it doesn't look like a Frankenstein phone.
I love clear cases but I hated the clear magsafe cases available. Most of them had the white circle but I hated that with my phantom black phone. And the ones that had a black circle also had that line below that blocks part of the Samsung logo. So I ended up buying this magsafe adapter. (Unfortunately it's not on Amazon). It has built in magnets for a stronger hold and it's made of metal and has a nice finish.
Naztech MagUP MagSafe Magnetic Ring 2-Pack
https://www.groupon.com/deals/gg-mp-naztech-magup-magsafe-magnetic-ring-2-pack?utm_source=anonymous&utm_campaign=UserReferral_ma
I went with the OtterBox Prefix case. I love it because it has squared off sides instead of round.
OtterBox Prefix Series case for Galaxy S23 Ultra - Black Crystal (Clear/Black) https://a.co/d/255UmSJ
I ended up getting the magsafe ring holder grip for the back side of the phone. I love this because it allows me to stick my phone to metal surfaces because it has magnets on both sides. It can also be used as a kick stand because of the rotating ring. Has a nice feel and it looks nice!
andobil Magnetic Phone Grip for MagSafe [Drop Protection] Strong Magnetic Phone Ring Holder Compatible with MagSafe Cellphones & Accessories, iPhone 14 Plus 13 12, Pro, Pro Max, Mini, Silicone, Black https://a.co/d/cQx7KZL
Hope it inspires more Galaxy users and hopefully that makes Samsung start putting a version of magsafe in their phones.
View attachment 5867417View attachment 5867419View attachment 5867421View attachment 5867421Awesome thanks for [email protected]!! How bout a Strong, secure car mount (not air vent [email protected]) come across any [email protected]?
Click to expand...
Click to collapse
spart0n said:
As an update to my previous post, I just got the magsafe installed under my dbrand grip case and I can't even see a bulge or anything and it doesn't interfere with charging or s pen at all. But I don't have the metal finger holder thingy yet, it says it's out for delivery today so I'll report back after I get it.
Click to expand...
Click to collapse
What brand of magsafe adapter did you purchase?
mmafighter077 said:
What brand of magsafe adapter did you purchase?
Click to expand...
Click to collapse
I bought EXACTLY the 2 items you posted. What I tried before was anker brand magsafe adhesive and it was WAY too thick under my case and didn't work
spart0n said:
I bought EXACTLY the 2 items you posted. What I tried before was anker brand magsafe adhesive and it was WAY too thick under my case and didn't work
Click to expand...
Click to collapse
I think you'll be satisfied with your set up. The ring is the best part. Let me know how you like it.
Idk if this helps i have magsafe in my UAG case since i had the phone and i had no issues at all. Plus i even have a magnetic pop socket i use from time to time and its pretty flawless. Unless your using magsafe on the charger maybe?
Just got the magnet finger hold thing that OP posted and unfortunately this did NOT work from inside my dbrand grip case but it does work from the outside on the back of the case. Also used spen all over and have zero issues. So that impressed me.
As per this YouTube video the S pen functionality disrupts when additional magsafe accessories like magsafe powerbank, magsafe wallet etc. are attached.
Virgo_Guy said:
As per this YouTube video the S pen functionality disrupts when additional magsafe accessories like magsafe powerbank, magsafe wallet etc. are attached.
Click to expand...
Click to collapse
I can't say about the the stuff he used in the video but I used a magsafe anker charger pod and it didn't interfere with the spen nor did the finger ring thing that OP linked because I bought exactly what OP bought and I had tried several others before and was very skeptical of OP but this works.
Related
Have any of you ordered this for your note? They make this one and the one without the flip cover. As of now, I am using the official flip cover and it is already starting to fall apart. I really like the look of this. If no one has ordered this, has anyone else tried any of their other products? Just curious about quality.
http://www.amazon.com/elago-Handmad...VJBO/ref=sr_1_8?ie=UTF8&qid=1331222074&sr=8-8
Also, I want to order this screen protector. There is a post here in the forums about it, but am also curious if the above case will fit with this .4mm thick tempered glass.
http://www.amazon.com/SPIGEN-SGP-Pr...1?s=electronics&ie=UTF8&qid=1331226637&sr=1-1
If it doesn't fit, this might be a good option to go with the screen protector...
http://www.amazon.com/SPIGEN-GT-N70...YD3E/ref=sr_1_3?ie=UTF8&qid=1331221815&sr=8-3
Any comments would be welcome
Very nice case. Love the slim design. Will look into it.
Ended up ordering the case without the flip front and a Steinhill Ultra Crystal screen protector.
When it comes it, I will post some pictures on the consolidated white note thread.
Just ordered....
I just ordered the flip cover version - should be here by the end of the week. Will post review and pics when it arrives.
Please come back and give us some reviews of this case. I really like the look of it. However, I wonder why there's no cutouts for the power or volume buttons. I also wish they had done a little more to cover the corners.
Budge said:
Please come back and give us some reviews of this case. I really like the look of it. However, I wonder why there's no cutouts for the power or volume buttons. I also wish they had done a little more to cover the corners.
Click to expand...
Click to collapse
I think the images are marketing mock-ups. See this description:
Product Features
Designed to fit your at&t, International Galaxy Note perfectly
Durable leather construction with secure closure
Custom cutouts for direct access to all device features
Made by handmade with genuine leather
ColSaulTigh said:
I think the images are marketing mock-ups. See this description:
Product Features
Designed to fit your at&t, International Galaxy Note perfectly
Durable leather construction with secure closure
Custom cutouts for direct access to all device features
Made by handmade with genuine leather
Click to expand...
Click to collapse
Yeah, I read that, too. I can see where the cutouts are for the camera, flash, usb, and mic. I just assumed that's what they were talking about. I guess it's possible that it's just a mockup, or you just have to push the buttons through the leather.
Does anyone know if this case is available in black?
Also, SPG makes a Stehen case similar to this one with full corner coverage.
i'm interested in this case too.
My case arrived!!!
So my case arrived today from Amazon, and I promised you all a review, so here goes:
1) Delivery & packaging
The case came via USPS - not UPS or FedEx. Ordered: Sunday, March 25th, 2012; delivered: Wednesday, March 28th, 2012. Came from San Diego, CA to Orlando, FL in 3 days. Not bad. The case was packed in a bubble-padded shipping envelope. A bit cheap considering I paid $4.99 in shipping & handling, but whatever.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inside the bubble wrap was the case in it's manufacturer's packaging. Nice pack - obviously meant for hanging on a peg in a retail location. It's attractive and well-protected inside, and the package was not difficult at all to open. There is a fingernail tab in the top-right corner of the front face that lets you just lift off the front cover. No chance of scratching your case with scissors or a knife - a nice touch, I thought.
The reason I mentioned the nice packaging is that inside the outer packaging, the case is resting inside ANOTHER plastic tray (this one without a face), providing an extra layer of cushioning and protection from crushing. It's obvious that whoever thought up the packaging design took care to remember the leather case inside...
2) Aesthetics and General Fit/Finish
This is a NICE case! The edges have all been finished and are not ragged like some other cases I've seen. Everything is glued instead of stitched, so we'll see how well that holds up over the long-term, but so far, so good - nothing is loose or peeling. There is a small company logo on the front in the bottom-left corner and another one (with a tagline) on the back in the bottom-center. Both are small and non-obtrusive.
3) SPECIFIC Fit and Finish
My 1st surprise was to find out that the cover MAGNETICALLY sticks to the case to close - a pleasant surprise! The 2nd surprise was to find a wallet-like card pouch on the inside with 2 slots for credit cards. Um, this was NOT in the pictures on the website and MAY be a problem when I install my SPIGEN SGP GLAS t. Premium Tempered Glass Series Screen Protector which arrives tomorrow. I will report back on this when it's installed.
The 3rd surprise was that there were no cutouts on the sides for power and volume up/down. I think I actually like this, as the leather is marked with the button positions and is soft enough that you can get the buttons to do what you want without *mashing* the leather. The top is wide open so you can slip the phone in the case, and the bottom has cutouts for the S-Pen, Mic, and USB port.
Top opening:
Bottom:
Right Side (Power):
Left Side (Volume):
Inside Flap:
As you can see from the last picture, there's a full-size hole for the earpiece and front-facing camera. The rear of the case also has cut-outs for the camera/flash and speaker. both are proportional and not overly large.
4) Summary
So, do I think it was worth $50 (by the time shipping was involved)? Yes. I think this is very much so a world of 'you get what you pay for', and I think this case is a well crafted, quality leather product. I'd expect to pay this much or more for a leather wallet, so I have no qualms about the price of this cover. The only trepidation I have is the credit card holder inside the front flap. I will never put any cards in it, and I would prefer the case not to have it (as was depicted in the images on their website), but it's not a deal breaker. The leather itself is smooth (non-grain) and evenly dyed, with no visible imperfections (barbed wire scars, dimples, etc.). It is genuine leather, not faux leather or any other synthetic fabric. Overall it does add appx. half-again the thickness of the phone, but it's not unmanageable.
Overall rating: 8/10 - ********_ _ - 2 Stars off for the credit card thing inside the front flap and not being shipped in a cardboard box for a bit more protection.
ColSaulTigh
Thanks for the review. It's a really good one and very useful. My only concern is that the phone seems could slip out from the top easily. Am I right?
Sent from my GT-N7000 using xda premium
i really like the look of this case and the design, but....where do you put cash????
aorifan said:
ColSaulTigh
Thanks for the review. It's a really good one and very useful. My only concern is that the phone seems could slip out from the top easily. Am I right?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
It doesn't slip out the top, but when you plug the charger in from the bottom, it does 'push' out the top a bit. A quick push back into the case, and all is good.
mejori said:
i really like the look of this case and the design, but....where do you put cash????
Click to expand...
Click to collapse
This case isn't the wallet one. This is just a phone case. They make a wallet version. As I posted in my review, I was surprised it had the credit card slots, as the original pictures on the website didn't show this.
As a follow-up, here are a few quick observations:
1) With the cover open and flipped around the back, the speaker is VERY DIFFICULT to hear. I've missed calls because I didn't hear the ringer.
2) Same problem with it sitting flat on a surface (like a desktop). The leather is so smooth it effectively blocks sound from the speaker. I find myself leaning it up on a pen or something just so there's an air pocket underneath.
3) It slips very easily into my pocket. I thought this was going to be an issue, but it's very smooth and slides nicely into my front pocket.
That's it for now - will report back as more questions pop up and/or I have more observations to post.
how is the thickness with having credit cards? ..is it awkward when talking on the phone, do you leave the cover closed or flip it back? as far as speaker ..my phone is always on silent ..while at work ..i only ask because i ordered a cheap $10. wallet "leather case off ebay..i love the concept but damn its bulky!!! its only temporary until you finish your review of the elago
mejori said:
how is the thickness with having credit cards? ..is it awkward when talking on the phone, do you leave the cover closed or flip it back? as far as speaker ..my phone is always on silent ..while at work ..i only ask because i ordered a cheap $10. wallet "leather case off ebay..i love the concept but damn its bulky!!! its only temporary until you finish your review of the elago
Click to expand...
Click to collapse
Sorry, I didn't see this post update - so here are the answers to your questions:
1) Thickness with credit cards - I don't know, as I don't put any in there. Like I said in my original post, this case wasn't suppose to have a CC pouch. The original pictures didn't show it, and I would have preferred it without the pouch. Based on thickness, I would say that the cards would press against the glass (especially if you are using the Glas+ protector like I am). I've always found that putting cards in a flat cover like this causes the flat cover to distort, so I'm guessing that that's what would happen here, especially if you then put the phone in a pocket.
2) Is it awkward talking on the phone.... - Yes and no. Holding the phone with the case open is a bit cumbersome as the 'hinge' adds width when the cover is open. I rarely hold the phone up to my head, I'm either using the speaker or a bluetooth headset. One note - the back cover, when open and flipped around, COVERS the speaker port, causing the speaker sound to become VERY muted. I usually either stick a finger in between, or if I'm setting the case down, leave the flap open and stick a pen or something under the phone (again, laying the case flat on the desk also causes the muted speaker effect).
Let me know if you have any other questions.
Thanks!
Just got mine. So far it looks good.not bulky. I still need to get used to this to comment.
Sent from my SAMSUNG-SGH-I717 using xda premium
3 Weeks Later....
So far, so good!
I get a lot of compliments on the case - it really does look very nice!
No issues regarding durability, wearability, etc. It's not getting dirty from handling, it's not scratched up (so far), and there are no places where the leather is separating, peeling, or otherwise failing.
Bottom line, I like it! Money well spent!
i will be ordering mine soon.. just want to make sure it has cc slots!!! thanks!!
ColSaulTigh said:
So far, so good!
I get a lot of compliments on the case - it really does look very nice!
No issues regarding durability, wearability, etc. It's not getting dirty from handling, it's not scratched up (so far), and there are no places where the leather is separating, peeling, or otherwise failing.
Bottom line, I like it! Money well spent!
Click to expand...
Click to collapse
mejori said:
i will be ordering mine soon.. just want to make sure it has cc slots!!! thanks!!
Click to expand...
Click to collapse
Bear in mind:
1) It only has 2 CC slots, and...
2) It wasn't suppose to have any at all!
WHy would the corners be exposed? Makes no sense. Drop it and there goes the screen..
Which question for ppl who using the flip case... How do you feel when holding it?
I have a Samsung flip case and i hate it. Hard to hold unless take some extra steps to fold the front to the back. When the phone rings, take more time to "flip the cover"..... so inconvenienced.
With my TPU case i use the phone instantly whenever I need.
Because this isn't a main stream phone, from what I can see, the choice of cases out there are really slim.
I bought a cheap case off ebay, which is ok, but i'm not terribly happy with. The case is from taipo212 on ebay, the 'rubber hard coating skin case'. It fits well and looks pretty good initially, but marks too easily due to the matte/rubber like material. It also came with a couple small marks already on it. However, I needed a case till I find the perfect case, and it was cheap.
I'm waiting on another case from ebay, which I will comment on when I receive it. A 'clear hard tough case' from 'yousave-au'. Would love to hear from anyone that has this already.
I couldn't find a generic cases thread for the mega 6.3, so I think this thread would be a big help to lots of people.
Can anyone who has a case comment on if the case is good, where you got it from etc, even people with bad experiences, if they can let us know, so we know what cases to avoid
I just ordered one of these from eBay UK for £1.99 with free screen protector. I like these ones as they are cheap and durable, it protects the whole phone and I have been using the same type of case for my Nexus 7, Original Note, Lg L3, and Galaxy Tab 2 7.0 with no problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are lots of generic cases available for the Mega 6.3 and in my experience they are quite good. Here are some ultra thin ones, I have tried this type of case on my original Note but didn't like it as the top and bottom of the phone are exposed to scratches.
These ones are advertised as Hydro Gel Rubber, whatever that means. I have also tried this with my original Note but after a few months it became loose and I went back to the S Line type case.
I use the S-Line and like it alot.
The phone is still slim and the texture is such that it doesnt hang up inside your pants front pocket when I pull it out..
Comes out and goes in smooth and is not slippery feeling like it will squirt out of my hand..
Im impressed. Just the features that I like..
EXCEPT.... one gripe.. I want the button covers removed. I want to feel and press the actual button and not the rubber button bumper..
I have a NillKin snap-on hard case (in black) for mine. This is quickly becoming my case of choice for all my phones - it's classy and maintains the thin waistline. It doesn't provide all-round edge protection though, so you need to be a bit more careful I also have a generic snap-on clear case, which looks alright but sits hard against some patches of the back, making it look a little cheap lol.
@gx3k can you please share the ebay link you order these cases from
Warnahly said:
@gx3k can you please share the ebay link you order these cases from
Click to expand...
Click to collapse
These are some slim/flip cases available on eBay UK (click on the pics for the link):
Ordered this one for £11.99 with the usual 'free' screen protector and stylus http://www.amazon.co.uk/SAVFY-Samsu...UTF8&colid=2CUOJPFBQAJ7A&coliid=IO8B31VIVJJN5
It looks ok and will do till something better comes along.
I like the TPU plastic cover. It protect my phone some time when I drop it.
Troute said:
Ordered this one for £11.99 with the usual 'free' screen protector and stylus http://www.amazon.co.uk/SAVFY-Samsu...iew cutout and also without the magnet flap..
Click to expand...
Click to collapse
cheap mega 6.3 leather case
leetrevor81 said:
Because this isn't a main stream phone, from what I can see, the choice of cases out there are really slim.
I bought a cheap case off ebay, which is ok, but i'm not terribly happy with. The case is from taipo212 on ebay, the 'rubber hard coating skin case'. It fits well and looks pretty good initially, but marks too easily due to the matte/rubber like material. It also came with a couple small marks already on it. However, I needed a case till I find the perfect case, and it was cheap.
I'm waiting on another case from ebay, which I will comment on when I receive it. A 'clear hard tough case' from 'yousave-au'. Would love to hear from anyone that has this already.
I couldn't find a generic cases thread for the mega 6.3, so I think this thread would be a big help to lots of people.
Can anyone who has a case comment on if the case is good, where you got it from etc, even people with bad experiences, if they can let us know, so we know what cases to avoid
Click to expand...
Click to collapse
I purchased a cheap leather mega 6.3 stand case on Amazon uk - 4 colors available : black white blue green grey pink, just search "allreli mega 6.3 case" on Amazon uk
Got my new case today,it's extra slim
gx3k said:
Got my new case today,it's extra slim
Click to expand...
Click to collapse
I like your case... I also like how the button holes are cut out exposing the buttons.
I have a TPU case like yours but the buttons are covered.
Where did you get your case??
Can you link us to your sweet case...
Is it flexible, TPU or a stiff plastic??
thanks...
jimmbomb said:
I like your case... I also like how the button holes are cut out exposing the buttons.
I have a TPU case like yours but the buttons are covered.
Where did you get your case??
Can you link us to your sweet case...
Is it flexible, TPU or a stiff plastic??
thanks...
Click to expand...
Click to collapse
Click the photo for the link:
It's stiff plastic for only £1.29 but it's from Hong Kong so it takes weeks to arrive.
I have the Poetic Atmosphere Case, very nice fit and looks great!
http://www.amazon.co.uk/gp/product/B00DH9AAV0/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
Just got one of these http://www.ebay.co.uk/itm/290945411155
The "Army Green" version, it's really a very dark brown like oiled leather or hunter leather. It has the same look and feel as a wallet I bought from Amazon UK (Visconti Hunter) though of course it's not leather.
There's no go to sleep magnet in it but that was easily fixed. It's a third of the price of the last case I bought and feels much nicer in the hand, the inner phone holder part is hard plastic not tpu and is open at either end with cut outs for the volume and power buttons.
Troute said:
Just got one of these http://www.ebay.co.uk/itm/290945411155
The "Army Green" version, it's really a very dark brown like oiled leather or hunter leather. It has the same look and feel as a wallet I bought from Amazon UK (Visconti Hunter) though of course it's not leather.
There's no go to sleep magnet in it but that was easily fixed. It's a third of the price of the last case I bought and feels much nicer in the hand, the inner phone holder part is hard plastic not tpu and is open at either end with cut outs for the volume and power buttons.
Click to expand...
Click to collapse
I have got one and while it is very good it worn quite quickly and will no longer "stand" up in landscape mode. I paid about $9 and am happy with I got.
ROCK M6.3 case is good choice, the classic s view flip cover with a replacement hard PC battery cover for the official plastic....
http://www.galaxymegacase.org/samsu...leather-cover-case-for-galaxy-mega-6-3-black/
Does it actually keep the display on all the time?
juzz86 said:
I have a NillKin snap-on hard case (in black) for mine. This is quickly becoming my case of choice for all my phones - it's classy and maintains the thin waistline. It doesn't provide all-round edge protection though, so you need to be a bit more careful I also have a generic snap-on clear case, which looks alright but sits hard against some patches of the back, making it look a little cheap lol.
Click to expand...
Click to collapse
I have ordered a brown Nillkin for my white Mega.
Got my new case today, same as my blue ultra slim case but I got black.
does anyone know of a case that fits the phone with a wireless back cover? i hate to buy a $45 case and it not fit...
davemonkee said:
does anyone know of a case that fits the phone with a wireless back cover? i hate to buy a $45 case and it not fit...
Click to expand...
Click to collapse
Some have said this will fit. http://www.amazon.com/dp/B00F3KP156/ref=cm_sw_r_udp_awd_F-g2sb15G76CQ
I've got one on order and am hoping for the best.
F350-6 said:
Some have said this will fit. http://www.amazon.com/dp/B00F3KP156/ref=cm_sw_r_udp_awd_F-g2sb15G76CQ
I've got one on order and am hoping for the best.
Click to expand...
Click to collapse
Thanks, for the price, it's worth a try. Since I've had my wireless charging cover, I've been without a case.
davemonkee said:
Thanks, for the price, it's worth a try. Since I've had my wireless charging cover, I've been without a case.
Click to expand...
Click to collapse
I've been using my Spigen slim armor case, but it developed the crack around the volume up button that so many others complain about. I had to use a dremel tool to grind down the thickness of the inside of the rubber sleeve to make it fit, but it cracked the hard case after a couple of weeks. Did the same thing to a neo hybrid I'm using now, but it doesn't fit quite right.
F350-6 said:
I've been using my Spigen slim armor case, but it developed the crack around the volume up button that so many others complain about. I had to use a dremel tool to grind down the thickness of the inside of the rubber sleeve to make it fit, but it cracked the hard case after a couple of weeks. Did the same thing to a neo hybrid I'm using now, but it doesn't fit quite right.
Click to expand...
Click to collapse
Yea, I think I'm gonna try and modify the case I was using before the wireless cover. I tried the Qi receiver that fit inside the factory door, but I didn't like the way it bowed the cover around the camera opening. ....something has to work
I purchased the spigen case I can not include a link since I'm new here but if you type "Spigen Slim Armor Case for Galaxy Note 3" into the search bar on amazon it will come up. I did have to modify it though. I cut the middle part out of the inner rubber piece. when the case is on the phone it is not noticable since it doesn't show. I just cut around the edge so that the back cover could push through the opening making the case fit perfectly to my phone with the bulkier back cover.
silverbucket said:
I purchased the spigen case I can not include a link since I'm new here but if you type "Spigen Slim Armor Case for Galaxy Note 3" into the search bar on amazon it will come up. I did have to modify it though. I cut the middle part out of the inner rubber piece. when the case is on the phone it is not noticable since it doesn't show. I just cut around the edge so that the back cover could push through the opening making the case fit perfectly to my phone with the bulkier back cover.
Click to expand...
Click to collapse
I think I'll try that. I like that Spigen case. Thanks
davemonkee said:
Thanks, for the price, it's worth a try. Since I've had my wireless charging cover, I've been without a case.
Click to expand...
Click to collapse
I purchased that case specifically to cover with the oem wireless charging back and can confirm that it fits snug but with Zero issues thus far the only case that I have found that does ....TGIF:good:
I know for certain that the UAG case for the Note 3 fits, but does "pull back" a little at the top (above the speaker) and bottom (below the home button). http://www.amazon.com/URBAN-ARMOR-GEAR-Samsung-Galaxy/dp/B00F8JEWT8
I am also going to try a bumper. (I have a metal one on order but it's coming from China so it's probably still another week out at least.
You would think Samsung would address this, but I haven't seen anything from them on this.
---------- Post added at 06:24 PM ---------- Previous post was at 06:19 PM ----------
silverbucket said:
I purchased the spigen case I can not include a link since I'm new here but if you type "Spigen Slim Armor Case for Galaxy Note 3" into the search bar on amazon it will come up. I did have to modify it though. I cut the middle part out of the inner rubber piece. when the case is on the phone it is not noticable since it doesn't show. I just cut around the edge so that the back cover could push through the opening making the case fit perfectly to my phone with the bulkier back cover.
Click to expand...
Click to collapse
How much of a "flap" did you leave at the top and bottom? Or did you cut exactly where the hard part of the case is?
ReggieSmith said:
I know for certain that the UAG case for the Note 3 fits, but does "pull back" a little at the top (above the speaker) and bottom (below the home button). http://www.amazon.com/URBAN-ARMOR-GEAR-Samsung-Galaxy/dp/B00F8JEWT8
Click to expand...
Click to collapse
How much does it pull back? Just doesn't quite cover the lip, or would it affect the headset or charger plug? If you shaved down the inside of the case a little, do you think it would fit better?
=How much of a "flap" did you leave at the top and bottom? Or did you cut exactly where the hard part of the case is?
Click to expand...
Click to collapse
If I had to guess I would say 1/8 of an inch. It goes unnoticed and still protects the phone. I actually just ordered the samsung wireless charging s-view case off of amazon. I didn't order it before because I didn't like how it flapped around freely, but now that spigen came out with the magnet clip for it I'm giving it a try.
I have purchased a LoveMei Aliumimum Bumper case (2 piece none screws)
Fits with official wireless back cover. Tempered glass makes it a tight fit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am interested in other options too.
Sent from my SM-N9005 using Tapatalk
Have you noticed any problems with your reception while using the aluminum bumper? Also, do you have a link for where you bought it from?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
The tech 21 and the diztronic work great with the oem wireless cover, I prefer the tech 21 case over the diztronic.
Yoeltimeisup said:
Have you noticed any problems with your reception while using the aluminum bumper? Also, do you have a link for where you bought it from?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
OEM Link
http://www.lovemeicase.com/pro.asp?id=36
No problem with signal or gps etc...
Peeps with problems are the ones buying fake knockoffs.
More pics here of the phone with bumper case...
http://forum.xda-developers.com/showthread.php?p=49691190
Sent from my SM-N9005 using Tapatalk
I tried a mumbi tpu case and it sort of fits. For 7 euros, I was willing to try but I can't get over how much bigger it makes the phone. It's like a brick. Still looking for a case that protects, fits the wireless back, but doesn't add huge amounts of bulk. I'll probably order a diztronic or a tech21 case to just see if it works. Might even look at that otterbox defender even though it doesn't quite fit around the lip. This is just shameful of Samsung to do this without building a case that would go around it. That small amount of bulge is costing angst over cases for us owners but I love the wireless charging. Sigh. Guess you can't have it all. LOL.
kamfl610 said:
I tried a mumbi tpu case and it sort of fits. For 7 euros, I was willing to try but I can't get over how much bigger it makes the phone. It's like a brick. Still looking for a case that protects, fits the wireless back, but doesn't add huge amounts of bulk. I'll probably order a diztronic or a tech21 case to just see if it works. Might even look at that otterbox defender even though it doesn't quite fit around the lip. This is just shameful of Samsung to do this without building a case that would go around it. That small amount of bulge is costing angst over cases for us owners but I love the wireless charging. Sigh. Guess you can't have it all. LOL.
Click to expand...
Click to collapse
Two stores I've been to that had the Otterbox on the shelf and let me try it on my phone with the wireless back cover. It didn't fit either time.
F350-6 said:
Two stores I've been to that had the Otterbox on the shelf and let me try it on my phone with the wireless back cover. It didn't fit either time.
Click to expand...
Click to collapse
Fark! Thanks for the heads up. It would have been bad to drop 40 to 50 euros on something that doesn't fit. :good:
SUPCASE Unicorn Beetle PRO Full-body Rugged Hybrid +Screen +Beltclip < USD 13 Shipped
Seem like a great option to me - stylish and functional, keeps your $650 intact and as secure as possible with almost all the beauty in place and moto sign left exposed.
http://www.amazon.com/gp/product/B00OHFGMGU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
USD 12.5 shipped at the moment, it was USD 9.5 a week ago (per-ordered two of them).
Reviews range from 4.5 to 5.0, depending on a smartphone model.
http://www.amazon.com/SUPCASE-Full-..._52?s=wireless&ie=UTF8&qid=1414339195&sr=1-52
http://www.amazon.com/SUPCASE-Full-..._17?s=wireless&ie=UTF8&qid=1414339068&sr=1-17
it does look good. says its not shipping until november 29th though...
Nice case. Looks like Urban Armor. Not a fan of the pill-shaped opening for the camera and Motorola logo though. Would rather have 2 separate holes (like the Spigen slim armor for the N6). Or even a case that doesn't display the Motorola logo at all. Thanks for sharing though. :good:
Been eyeballing this case for a few days, I personally like it and think it offers great protection, but before I order one, I'm curious if the thickness will prevent wireless charging. That will determine whether I get it or not.
I had one of the Supcase beetle cases for the OG Moto X. I liked the look of it on the computer screen, however in the hand, it's rather uncomfortable because of its construction. The plastic is rather sharp on the sides and edges where the phone is held. So I would be apprehensive about purchasing one of these for my own soon-to-own N6.
Sent from my Nexus 5 using Tapatalk
This looks smoother
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The supcase is the one I wanted to have as there is no otterbox available. I decided to get the White one, and guess what. In Germany, you can get the black one via Amazon. All other countries around Germany (UK, FR) have it listed in White. Duuuh.
I got the Supcase unicorn beetle pro and took it straight off! It makes an already big phone just too dam big!
MaximoMark79 said:
I got the Supcase unicorn beetle pro and took it straight off! It makes an already big phone just too dam big!
Click to expand...
Click to collapse
It surely gets a lot bigger. I know from my previous phones with Otterboxes. But on the other side, I find handling the phone much easier if it's heavier and bulkier, too. The additional rubber stuff and edges of those coses make handling easier for me. but well, yes, tastes are different
You have the White case and want to get rid of it?
clothednblack said:
This looks smoother
View attachment 2986797
Click to expand...
Click to collapse
I have this case, its pretty awesome and is fully protected.
Sent from my Lenovo TAB S8-50F using Tapatalk
I have one of these on my n6 and also on my n9. I think its a great deal and offers good protection. I'm very happy with them both especially for the price!
I have this case! I agree that some aspects of it are non-appealing. The back of the case is rounded to much and very slick. Its quite hard to remove the case. The rubber plug that protects the charge hole is very tight and presses down on the charge cable when the phone is charging.
+'s
I'm in the army and day to day use is rigorous. The supcase has proven to be extremely tough. Once its on the phone it fits very tight and completely protects the phone. The pill shape opening in the back is quite useful in my opinion. With it showing the Motorola logo on the back of the phone, this acts as a aid in my single handed operation of the huge NEXUS 6. It provides a solid holding spot for my index finger. Although it may be a very cheap case it functions amazingly well in my extreme conditions work environment. The complimentary belt clip holster functions quite nice as well.
I ordered the case and love it. I'm a letter carrier and needed a rugged case with a belt clip. The only negative comments I have about it is that it is extremely hard to remove the case from the phone and I had to remove my tempered glass because of the snug fit. It is smooth on the back, but the rubberized part of the case gives me good grip on the case. Overall 4 out of 5 stars, IMO.
RayEdmondson said:
I ordered the case and love it. I'm a letter carrier and needed a rugged case with a belt clip. The only negative comments I have about it is that it is extremely hard to remove the case from the phone and I had to remove my tempered glass because of the snug fit. It is smooth on the back, but the rubberized part of the case gives me good grip on the case. Overall 4 out of 5 stars, IMO.
Click to expand...
Click to collapse
A fellow postal worker! Just make sure the belt clip doesnt get in the way of your dog spray, scanner, or pantech
PaisanNYC said:
A fellow postal worker! Just make sure the belt clip doesnt get in the way of your dog spray, scanner, or pantech
Click to expand...
Click to collapse
lol
Nope. It does not work with wireless charger. I have two wireless chargers, both works fine for my N7 and N5 (with normal case), but it does not work with my N6 with Supcase.
However, I suspect the wireless charger is killing my N5 battery (that's why I have to buy a N6 in the first place), so I probably won't miss wireless charging too much.
hevangel said:
Nope. It does not work with wireless charger. I have two wireless chargers, both works fine for my N7 and N5 (with normal case), but it does not work with my N6 with Supcase.
However, I suspect the wireless charger is killing my N5 battery (that's why I have to buy a N6 in the first place), so I probably won't miss wireless charging too much.
Click to expand...
Click to collapse
It works with all of my wireless chargers , even my portable QiStone which is the weakest one.
I decided to compare this case with my dual-layer cases because it was mentioned that wireless charging is still enabled with it on. I also confirmed this to be true, so that's cool.
I like the holster ease, although not using a proper hinge means that the hard plastic tab which you pull open to release the phone might snap some day.
This is not a dual-layer case, though it's got nice coverage on top of the screen's front-facing edges and uses hard, rubberized sides around the phone's perimeter. There is a thin strip of foam between the phone and the hard plastic back, instead of a dual-layer case's full sleeve that surrounds the phone and is then covered by the harder, outer case. So, in an impact on the sides, I think the soft edges will displace some force into the case's rigid frame instead of all hitting the phone, which is good. But, an impact on the phone's back would seem to mostly travel right into the phone due to that very thin foam strip separating the phone and case.
The built-in screen protector/plastic shield is glued into the top assembly piece, so I had to use an X-Acto knife to pry it up and then pulled it off with pliers. That left a strip of semi-soft glue all the way around the inside lip of that piece, which would have been in contact with the phone's glass or edge after assembling. So, it took about 10 minutes to carefully scrape all the glue residue away and then clean that frame piece to ensure nothing much was left.
Perhaps due to not having the built-in screen protector, I noticed that there was a slight lift in a couple areas between the phone's (Spigen Crystal-protected) glass surface and the rubberized lip of the SUPCASE's frame after it was fully assembled on the phone. This isn't the worst thing in the world, but it means that liquids and debris simply have better lines of sight to get under the case, potentially.
As others have said, the fit is incredibly tight and that also makes it difficult to remove - I don't see that as a negative, since I would only remove a case if it broke.
I'm still very wary with this big, thin phone and prefer a full dual-layer design around it. But, I like the solidity of this case and its holster clip. So, I'll keep it around as a backup.
- ooofest
Hello everyone, let us open a general CASE topic where we share all experiences and recommendations with cases and also discuss questions about cases.
Let's avoid opening unnecessary many single category topics.
Otherwise you have no overview in the later course.
In one topic it is at least clear.
I would start right away.
I have found the following premium cases in carbon style.
REUTERSON Price: 79,99€
Spoiler: REUTERSON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CENMASO Price: 39,99€
Spoiler: CENMASO
PITAKA Price: 79,99€
Spoiler: PITAKA
Has anyone had any experience with one of these protective covers?
Are there any restrictions regarding a glass screen protector, because of the curved design, to what degree the protective cover may/should go?
My personal favorite is the PITAKA case, as far as the design accents are concerned, but as far as the protection is concerned, I would prefer the REUTERSON, as it protects the entire side of the device. As for the price, I find the CENMASO the fairest. It offers almost complete protection at the edge like the REUTERSON but is half the price.
Edit: (10.02.2023)
#PITAKA
So I have tried the PITAKA hull, my conclusion.
The case looks very chic, but I am very bothered that the case protects the sides only half ( under the volume buttons), is completely closed at the bottom (strongly protruding) and feels very slippery overall.
_______
Saw these on another site.
Woodgraw | Wood iPhone Case | Samsung Galaxy Case Online
Are you finding a quality wood phone case? ⭐ WOODGRAW has a range of solid wood phone cases and covers for your smartphone. Choose and order online!
woodgraw.com
Ordered for another make and i will post quality when it arrives. Made in Ukraine and comms been good so far. I will probably order for 23 ultra when i see the one i ordered
Ordered spigen amored opti case for 23. Fits my current 22 well. However its quite slippy in the hand.
I ordered the Mous case for s23U as it's supposed to be strong, they produce their own screen protectors so don't have to worry about compatibility with case. Also really wanted something with magnets so I can use a magnetic car holder.
I have ordered that case from the link below. It was recommended by other guy on discord S23 ultra group. I will post my experience when it arrives
Galaxy S23 Series Premium Case With Lens Push Cover
Product Details:Style: all inclusiveMaterial: TPU+PC+carbon fiberFunction: Anti-dropColor: black Remarks: Non-Samsung brand products, compatible with Samsung models
gadgetscenter.shop
I'm sticking with the same Spigen Tough Armor I've had on every device I've had since I stopped using UAG cases that kept falling apart on my Android devices when I got my iPhone 8 Plus.
https://www.amazon.com/Spigen-Tough-Armor-Designed-Galaxy/dp/B0BJSNT7H8
I also really like that it has cutouts for each of the three main cameras because I've seen many people complain about getting junk caught in the rings on the S22 Ultra and since this is a Designed For Samsung case, it means that Spigen worked directly with Samsung to make it so it should be precision cuts everywhere. I also just really like the look of the individual camera rings as opposed to just having a chunk missing there.
Waiting caseborne case to test
Tried samsung original case transparent, feels very solid on my s23U
Unless, Amazon sent me a S22 ultra case, even though the box and the listing said a s23 ultra case, it works perfectly fine on my s22 ultra.
So if it is indeed a s23 case, then I dont see any reason a s22 case should be fine
theboz1419 said:
Unless, Amazon sent me a S22 ultra case, even though the box and the listing said a s23 ultra case, it works perfectly fine on my s22 ultra.
So if it is indeed a s23 case, then I dont see any reason a s22 case should be fine
Click to expand...
Click to collapse
An S22U case won't fit on S23U!
OnnoJ said:
An S22U case won't fit on S23U!
Click to expand...
Click to collapse
Which is odd since a S23U case fits pretty good on a S22U. The only difference I can tell is the extra cut out for the pin hole next the charger.
The side buttons there is not enough of a change, even with a slight alignment difference, the buttons works as they should with the case on.
theboz1419 said:
Which is odd since a S23U case fits pretty good on a S22U. The only difference I can tell is the extra cut out for the pin hole next the charger.
The side buttons there is not enough of a change, even with a slight alignment difference, the buttons works as they should with the case on.
Click to expand...
Click to collapse
Some flexible cases may have a (poor) fit, as dimensions are just slightly different. For a proper fit you would want aS23U case.
See also:
Ramme said:
Has anyone had any experience with one of these protective covers?
Are there any restrictions regarding a glass screen protector, because of the curved design, to what degree the protective cover may/should go?
Click to expand...
Click to collapse
I had two of them, PITAKA and one form unbox therapy also one more cheap from China(aliexpress) let me share my thoughts:
- if you want to protect your phone AND keep it in nice condition, then forget about that case. Material is so hard that any type of sand/grain/dust will scratch sides/corners of your phone.
- those cases are quite bad, there is literally no difference between pitaka/unbox therapy and china besides price, chinese one was IMO best and costed 12gbp instead of 50 lol.
I am choosing ringke onyx and their screen protector, cheap and should be quite secure. I was going to choose spigen once again, however it is too bulky.
Ramme said:
I would start right away.
I have found the following premium cases in carbon style.
REUTERSON Price: 79,99€
Spoiler: REUTERSON
View attachment 5828363
CENMASO Price: 39,99€
Spoiler: CENMASO
View attachment 5828365
PITAKA Price: 79,99€
Spoiler: PITAKA
View attachment 5828367
Has anyone had any experience with one of these protective covers?
Are there any restrictions regarding a glass screen protector, because of the curved design, to what degree the protective cover may/should go?
My personal favorite is the PITAKA case, as far as the design accents are concerned, but as far as the protection is concerned, I would prefer the REUTERSON, as it protects the entire side of the device. As for the price, I find the CENMASO the fairest. It offers almost complete protection at the edge like the REUTERSON but is half the price.
Click to expand...
Click to collapse
Carbon fiber cases look sick, but I wonder what level of protection they offer? I have a generic transparent silicone cover on just right now, and it looks that it would bounce if I drop the phone accidentally.
When I look at all the carbon cases, unfortunately, they all do not look safe, the frame usually goes on the sides to under the volume buttons, clearly silicone is safer and better, it wraps especially usually completely the sides of the phone.
According to the pictures on the website, at least the carbon goes over the volume buttons in the Reuterson case. The only question is whether it will be the same for S23... on the website the picture seems to be of the S22 Ultra.
I also ordered the Spiegn transparent case first and am waiting for the reviews regarding the carbon cases.
bgtip said:
Carbon fiber cases look sick, but I wonder what level of protection they offer? I have a generic transparent silicone cover on just right now, and it looks that it would bounce if I drop the phone accidentally.
Click to expand...
Click to collapse
Look at my post above
EtherealRemnant said:
I'm sticking with the same Spigen Tough Armor I've had on every device I've had since I stopped using UAG cases that kept falling apart on my Android devices when I got my iPhone 8 Plus.
https://www.amazon.com/Spigen-Tough-Armor-Designed-Galaxy/dp/B0BJSNT7H8
I also really like that it has cutouts for each of the three main cameras because I've seen many people complain about getting junk caught in the rings on the S22 Ultra and since this is a Designed For Samsung case, it means that Spigen worked directly with Samsung to make it so it should be precision cuts everywhere. I also just really like the look of the individual camera rings as opposed to just having a chunk missing there.
Click to expand...
Click to collapse
That's a great choice. I used the Spigen tough armor case for the last two Samsung phones I had. Also love how the case goes around all the camera rings looks special. Was very tempted to go for this case again but really struggle to find a good screen protector that is compatible with this case. Will you be using a screen protector, and if yes which one?
I chose Imbzbk because of the reviews. Price / performance is thus at 10 € / per glass film. I am curious when my Samsung arrives how my equipment will fit. I will report back.
YREX said:
That's a great choice. I used the Spigen tough armor case for the last two Samsung phones I had. Also love how the case goes around all the camera rings looks special. Was very tempted to go for this case again but really struggle to find a good screen protector that is compatible with this case. Will you be using a screen protector, and if yes which one?
Click to expand...
Click to collapse
I haven't used one since my HTC Mogul but Spigen makes screen protectors and their site says this one works with all their cases.
Galaxy S23 Ultra Screen Protector Neo Flex
Shop our Galaxy S23 Ultra 5G flexible film Screen Protector. The Neo Flex® ensures edge-to-edge protection that combats scratches and fingerprints to keep the screen crystal clear.
www.spigen.com
just get a fake otterbox or actual one and a whitestone dome glass and call it a day. hoping to get this phone but want to confirm the setup i mentioned before i REALLY consider