I am so brilliant so i select format all + download on sp flash tool and my imei is gone.
I want to flash the IMEI on the box.
Modemmeta fails at get kernel port
When i choose a specific COM port, it fails at Connect AP.
What can i do?
U8 binary, lastest kernel.
Android Q is not booting for some reason. A107f
Related
hi.I used SP Flash Tool to flash my phone with the wrong ROM and now its DEAD.It won't turn on.it won't charge and still PC detection as Mtk Usb Port.
I have another same device.i get backup of stock ROM with Mtk Droid Tool.(i know backup files work.recovery file with scatter flashed sucsesfully when i install cwm recovery on new device)
i can format whole flash with SPFT and get green circle.
then try to download,but this errors appeared.
with SP FLASH TOOL 3.1224.01 : S_DL_GET_SETTING_FAIL (5054)
with SP FLASH TOOL 3.1304.0.119 :S_DA_DRAM_NOT_SUPORT (3004)
i see this error too : booloader doesnt exist on nand flash.please download bootloader first!
i think its bootloader problem so maybe testpoint method works.problem is i dont know which one is TP and how can i use it.
cpu : mtk6517(6577)
ram:512
android :4.0.4
http://www.apanda.com.cn/a60t/
anyone.please help
My phone xtouch PF73 gives me this message "decrypt error, boot failed" after i tried flashing it.
I have tried two more ROMS but with those i get the "S_NOT_ENOUGH_STORAGE(1011) error message in both SP Flash tool and WiseLink Tool"
Android version: 4.22
MTK platform : MT6572
I used
SP Flash Tool v5.1352.01
SP Flash Tool v5.1628
wise tool v4.6.0.44
How can i fix it?
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
nyado said:
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
Click to expand...
Click to collapse
Reason:
The firmware(s) you are trying to flash to your MTK device is larger than the available space allocated for the firmware in the phone’s storage space.
Possible fix ( was not tested by me ):
Click on the Format Tab
Select/tick Format whole Flash and click the Start button before connecting your device.
Once the formatting is done, go to the Download Tab and select just the Preloader file first and flash it.
After the preloader.bin has been successfully flashed to your device, tick the rest of the firmware files and flash as well.
Hi , today I want to share with you how to fix soft-bricked Lenovo a390 which can't pass Lenovo boot animation , can't enter into recovery because it doesn't have any option .
So here we go :
Required files :
- PC or laptop with working internet connection
- Stock firmware :
http://www.mediafire.com/file/o3vkpzr6wdt0frv/Lenovo_A390_S316_MT6577_20130730.zip
- Sp flash tool (stored inside stock firmware)
- USB drivers (stored inside stock firmware)
Let's begin .
1. Once you download firmware stock firmware extract him on Desktop to be easy for you to navigate files .
- Install first drivers , you can do manualy or run Auto Installer Driver v1.1236.00 open SmartPhone driver and run driver installer for you version of os 32 bit or 64 bit.
2. Now open firmware and delete CheckSum.ini because it shows error at the end of flashing with Sp flash tool when is that file inside firmware.
3. Now open SP flash tool add MT6577_Android_scatter_emmc.txt , make sure that everything is checked , click on Format now check Auto format Nand Flash and Format whole flash except Bootloader and NVRAM Bin Region and click OK .
4. Now make sure your device is off , and plug usb cable on your phone and connect with PC now the format will begin . Once is finish , re-connect your phone with PC and fast click on Download button . Wait when is flashing finish , and once is finish unplug usb from your .
Now who want to flash also trwp touch recovery , he can do the same steps exept Format option :
Twrp Recovery :
http://lenovo-forums.ru/Files/OS/A390/Custom/recovery_TWRP_2.5.0.0_A390_S316_MT6577.zip
Now when everything is finish , power up your device normaly and check your if is everything working like IMEI , WIFI , Bluetooth .
Check imei *#06# it the status is invalid , turn off your device , write somewhere those two imei numbers check twice if is everything okay go to dialer and write this code *#*#3646633#*#* , now EngineerMode will pop up , scroll up and click on CDS Information now go to Radio Information now click on Phone 1 write inside input box AT+EGMR=1,7,"here you need to write your first 15 digit imei number" and click on SEND AT COMMAND , now go back and click on Phone 2 ] write inside input box AT+EGMR=1,10,"here you need to write your first 15 digit imei number" and click on SEND AT COMMAND . Once you do that , Power Off your device and power ON again , the problem should be solved .
For those who have wifi error nvram warning err= 0x10 you need to root your device .
This is the way for rooting which works for me :
- connect your phone with wifi network and download and install Framaroot 1.9.3 APK
https://forum.xda-developers.com/ap...pk-to-root-t2130276/post37508806#post37508806
once you downloaded open app and allow uncommon sources in order to install app , go back to Download folder and install . Once you installed , open it and click on Install SuperSU and from drop menu click on Faramir once rooting is finish turn off your phone and turn on again .
Now download this app MTK 0x10NVRam Fix from this link
https://apkpure.com/mtk-nvram-0x10-fix/itz.cod3r.mtk0x10
Once you downloaded open app and allow uncommon sources in order to install app , go back to Download folder and install . Once you installed , open it and when is finish reboot your device and the problem will be solved .
Good Luck
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
etnica- said:
I flashed original firmware from cubot.net for my cubot r9 . The process was success but now my phone is dead. I tried to flash again but flashtools say...
ERROR: S_FT_ENABLE_DRAM_FAIL (OxFC0) :crying:
Click to expand...
Click to collapse
The process wasn't successful, sorry. From what I understand after a bit of Googling, that error message means the firmware you were trying to flash wasn't compatible with your device. Either that or there was something wrong in the settings.
I found this on https://forum.hovatek.com/thread-439.html:
Error OXFC0
Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html
Delete the sp flash tool folder then re-extract
Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
Consider using the latest version of Sp Flash tool
Format the phone before trying to flash the file(s) again
Click to expand...
Click to collapse
I did exactly what you said. I tried 3 different firmware with no luck. What can I do?
Hello!
My phone, Acer Liquid Z630s, recently had a problem and ended up shutting off as soon as it boots up. I turn it on, the Acer powered by Android white screen shows up then immediately shuts off. What was the problem here?
I couldn't access recovery mode either because it would also show up the same thing above then shut off immediately before it can even reach the recovery mode menu. But I could plug it in directly into download mode through SP Flash Tools because the phone vibrates when I hold down the volume up + power buttons (aka the recovery mode combination which was I think also the download mode combination). I downloaded the correct stock ROM off the Acer website (MT6753) and flashed it. The ROM was successfully flashed. But when I turned it on the screen lit up but it was just a blank black screen. It was lit up, but it was just dark black. I tried to wipe the system and flash the ROM again and at the end of the process, an error message appeared and I looked up the error code and this was exactly it:
"Error 6104
Message: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE : 0X00
Meaning: Wrong flash settings or firmware
Solution:
Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
Go to Options > Option > Connection > USB Speed > Full Speed
Go to Options > Option > Download > Untick DA DL All with Checksum"
I did what the solution told me, and as I tried to flash the ROM again, but I couldn't turn on my phone anymore. The volume up + power button combination no longer produces a vibration, and when I plug it into my computer it gets detected as a MediaTek USB Port (COM6) but SP Flash Tools no longer detects my phone and gives off this error:
"Error 0x13BE
Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash"
I don't know what to do at this point. Is it beyond salvation? But my phone still gets detected by my computer and it still produces the sound when you connect a device through the USB ports. Help me please.
Thank you in advance.
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Teddy Lo said:
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Click to expand...
Click to collapse
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
lexpizarro said:
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
Click to expand...
Click to collapse
Hi, If you flashed right stock firmware for your device correctly, your device it should not be bricked so I thing your flash file are not good.
Explain me what did you tried and which file you flashed?