Recently I bricked my A037F by downgrading from android 13 > 11 using an MtkClient backup, now it will no longer turn on or display anything, and I can't get into Odin.
I suspect it is because of an anti rollback system.
I would greatly appreciate if anyone could provide me with some MtkClient backups of the Android 13 bootloader partitions for the A03S (Doesn't matter which variant), including but not limited to:
Preloader
Boot2
Aboot
Boot
Efs
Lk
Dtbo
Vbmeta
I understand if you have any reservations about this so please let me know if there are any concerns I can address.
Thanks.
Can anyone confirm which of the partitions contained in the stock samsung firmware package are raw partitions (instead of having some special encoding) and can be safely flashed via MtkClient?
castor2020 said:
Can anyone confirm which of the partitions contained in the stock samsung firmware package are raw partitions (instead of having some special encoding) and can be safely flashed via MtkClient?
Click to expand...
Click to collapse
Please share the link for official odin firmware for your phone and I will make scatter firmware out of it which you can then flash using SP Flash Tool.
https://dl2018.sammobile.com/NVhaRC8rLDtWLTI0RDcoREdfLzwlPkcrMi1SKCsmM1oOARlJUyA5RSReVkA1UlNFQ1xbSlFHTlIDDwkEFlJTRUFdWEtRQkY./A037FXXS3CWC7_A037FOLM3CWC7_XNZ.zip
castor2020 said:
https://dl2018.sammobile.com/NVhaRC8rLDtWLTI0RDcoREdfLzwlPkcrMi1SKCsmM1oOARlJUyA5RSReVkA1UlNFQ1xbSlFHTlIDDwkEFlJTRUFdWEtRQkY./A037FXXS3CWC7_A037FOLM3CWC7_XNZ.zip
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't have access to Sammobile.
Use https://samfirms.com/ or
Samsung Firmware Download - Lastest official firmware update
Samsung Firmware Download ⭐ Official and fast update ⭐ Lastest and old version ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
castor2020 said:
Recently I bricked my A037F by downgrading from android 13 > 11 using an MtkClient backup, now it will no longer turn on or display anything, and I can't get into Odin.
I suspect it is because of an anti rollback system.
I would greatly appreciate if anyone could provide me with some MtkClient backups of the Android 13 bootloader partitions for the A03S (Doesn't matter which variant), including but not limited to:
Preloader
Boot2
Aboot
Boot
Efs
Lk
Dtbo
Vbmeta
I understand if you have any reservations about this so please let me know if there are any concerns I can address.
Thanks.
Click to expand...
Click to collapse
follow this tutorial
How to create MTK scatter firmware for Samsung A12F using CSC file!
Create MTK Scatter Firmware Samsung A12F using odin firmware! This firmware can be used to flash the device using SP Flash Tool in BROM mode. Requirements: 1. CSC file from the Odin Firmware 2. MTK Auth Bypass Tool (Credits: Mofadal...
forum.xda-developers.com
Here is the link to to the same firmware on samfw.
Download Galaxy A03s SM-A037F (XNZ) A037FXXS3CWC7 in Samfw - Samsung firmware download
Galaxy A03s SM-A037F (XNZ - New Zealand) A037FXXS3CWC7 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
castor2020 said:
Here is the link to to the same firmware on samfw.
Download Galaxy A03s SM-A037F (XNZ) A037FXXS3CWC7 in Samfw - Samsung firmware download
Galaxy A03s SM-A037F (XNZ - New Zealand) A037FXXS3CWC7 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Click to expand...
Click to collapse
You can follow this tutorial
How to create MTK scatter firmware for Samsung A12F using CSC file!
Create MTK Scatter Firmware Samsung A12F using odin firmware! This firmware can be used to flash the device using SP Flash Tool in BROM mode. Requirements: 1. CSC file from the Odin Firmware 2. MTK Auth Bypass Tool (Credits: Mofadal...
forum.xda-developers.com
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description:
Odin is the ROM Flashing Tool for SAMSUNG smartphones. ROM files flashable with Odin come with .tar extension.
Most of the ROMs you are going to flash with Odin are the official stock Samsung ROMs (or leaked stock ROMs). Custom ROMs are rerely flashable by Odin because they come with .zip extension that Odin does not recognize (it recognizes .tar files).
Custom kernels, however, are sometimes provided in .tar format by their developers (e.g. CF-Root kernels), so that they can be flashed by Odin. When your phone is new and running official firmware you most often cannot flash a custom ROM to it because a Samsung phone often requires a custom recovery and root rights that are included in a custom kernel to be able to flash custom ROMs. That's why Odin often comes in handy in rooting and flashing a custom firmware to your phone because you (often) can flash a custom kernel with it that already includes root and custom recovery and enables you to flash custom firmware (custom ROMs). I use the word "often" very frequently in the previous sentence because every Samsung smartphone is different and requires various procedures for rooting it and flashing custom ROMs (see the section about using Odin below).
If it comes to stock ROMs, the best source of stock (official) Samsung ROM files is located at this excellent website: SamMobile.com/firmwares (link). It requires registration (it's free) and I encourage you to set up an account there because you will most likely use this site several times during your stay at XDA. You will most likely come across 1 .tar or 3 .tar file ROMs there, flashable by Odin. Refer to the Odin flashing guide below for more info.
Below in this thread you can download Odin v3.09, v3.07, v3.06, v3.04, v1.85, v1.83 and all important versions of Odin Multi Downloader.
However, bear in mind that not every Samsung smartphone can be flashed using any Odin version. In fact, for every Samsung smartphone there's a specific Odin version compatible with it. Please refer to the tables below to learn which Odin version is compatible with your phone!
To use Odin with ANY Samsung phone you first need to properly install latest Samsung USB Drivers for Mobile Phones. You can download the drivers in this thread (link). They work for all Samsung smartphones. In that thread there is a full guide on installing the drivers on Win 8/7/Vista/XP x86 & x64.
Click to expand...
Click to collapse
Download:
Code:
https://www.sendspace.com/file/bub5f3
http://www51.zippyshare.com/v/4KvmJlOM/file.html
Support to all devices
Yes.
Samsung Only
Hi John, thanks for the info. Where are the table below you mention? i am using note 3 SM-N900, which odin should i use?
The one posted above in the 1st post should work fine with your phone
ompid said:
Hi John, thanks for the info. Where are the table below you mention? i am using note 3 SM-N900, which odin should i use?
Click to expand...
Click to collapse
You can use odin 3.09 version, I highly recommended to get more info and the download links via following links.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
http://www.samsungodindownload.com
Thanks :good: :good:
Odin3 v3.12.3
Update: Download Odin3 v3.12.3 – Latest Version - odin3download.com/download-odin3-v3-12-3.html
Can I flash without pc?
Isn't there way to flash recovery without pc cuz.. I forgot to restore boot image in twrp and now my phone is now in downloading mode .
Hello guys,
Actually, i wanted to upgrade my SM-G9910 (hong kong region) to ONE UI 4.0 beta with the Android OS 12 beta.
From this https://www.xda-developers.com/samsung-one-ui-4-android-12-update-tracker/#galaxys21, this provide the
One UI 4.0 Beta recovery ROM.
And i failed to sideload any of the above package (USA) with snapdragon chip.
And i found that someone need to first flash the ROM into those stable ONE UI 3.1 version first(let say USA). then sideload the ONE UI 4.0 beta. Is this correct?
So can i flash my `SM-G9910` using firmware `SM-G991U` in order to sideload ONE UI 4.0 beta successfully later? I have tried use Odin with correct instruction to flash the ROM using `SM-G991U` firmware. but it keep failed with `<id:0/003>FAIL! (Auth)`.
And i found another thread mentioned that we cannot flash one model to another model. is this correct?
[HELP] security check fail: abl
I'm trying to install the s9 + G965U ARI6 firmware on my s9 + G9650 (Latin America model) with snapdragon 845. I am following the tutorial here of xda for the installation of the beta of the PIE and the first step and the installation of the ARI6...
forum.xda-developers.com
Can you guys teach me how to correctly sideload the ONE UI 4.0 beta on my `SM-G9910` with TGY csc code.
my S21 info:
model name: Galaxy S21 5G
device type: o1q
product name: o1qzhx
CSC Code: TGY
CSC Version: G9910ZCS2AUIN
kkktang said:
Hello guys,
Actually, i wanted to upgrade my SM-G9910 (hong kong region) to ONE UI 4.0 beta with the Android OS 12 beta.
From this https://www.xda-developers.com/samsung-one-ui-4-android-12-update-tracker/#galaxys21, this provide the
One UI 4.0 Beta recovery ROM.
And i failed to sideload any of the above package (USA) with snapdragon chip.
And i found that someone need to first flash the ROM into those stable ONE UI 3.1 version first(let say USA). then sideload the ONE UI 4.0 beta. Is this correct?
So can i flash my `SM-G9910` using firmware `SM-G991U` in order to sideload ONE UI 4.0 beta successfully later? I have tried use Odin with correct instruction to flash the ROM using `SM-G991U` firmware. but it keep failed with `<id:0/003>FAIL! (Auth)`.
And i found another thread mentioned that we cannot flash one model to another model. is this correct?
[HELP] security check fail: abl
I'm trying to install the s9 + G965U ARI6 firmware on my s9 + G9650 (Latin America model) with snapdragon 845. I am following the tutorial here of xda for the installation of the beta of the PIE and the first step and the installation of the ARI6...
forum.xda-developers.com
Can you guys teach me how to correctly sideload the ONE UI 4.0 beta on my `SM-G9910` with TGY csc code.
my S21 info:
model name: Galaxy S21 5G
device type: o1q
product name: o1qzhx
CSC Code: TGY
CSC Version: G9910ZCS2AUIN
Click to expand...
Click to collapse
Hello, you cannot flash a us version to a Chinese version. Fortunately, we do have a discussion thread regarding your model and the Android 12 beta.
---> https://forum.xda-developers.com/t/...scussions-firmware-updates-etc.4341051/page-3
Prodction said:
Hello, you cannot flash a us version to a Chinese version. Fortunately, we do have a discussion thread regarding your model and the Android 12 beta.
---> https://forum.xda-developers.com/t/...scussions-firmware-updates-etc.4341051/page-3
Click to expand...
Click to collapse
Thank you for your help. But the resources from the link cannot load successfully in Odin
kkktang said:
Thank you for your help. But the resources from the link cannot load successfully in Odin
Click to expand...
Click to collapse
Did you download this file?
https://cherrydrive.cn/s/l4jiJ?&continueFlag=8996eae0c64321f7eee9c45aadff3f8c&path=/底包五件套
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Checked out and loaded each of them into Odin?
If you've done everything right sometimes it could be a bad usb port or a bad cable.
Prodction said:
Did you download this file?
https://cherrydrive.cn/s/l4jiJ?&continueFlag=8996eae0c64321f7eee9c45aadff3f8c&path=/底包五件套 View attachment 5453897
Checked out and loaded each of them into Odin?
If you've done everything right sometimes it could be a bad usb port or a bad cable.
Click to expand...
Click to collapse
You may need a special version of Odin
Hi guys. After an OTA update, my Galaxy Tab got into Bootloop. I already tried a data factory reset from recovery but still the same. Also try to flash with Odin, the process ends OK but still in BOOTLOOP. After several Bootloops, it enters recovery and says: "Can't load Android System your data may be corrupt"
This is what the recovery tells me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
romanrsr said:
Hi guys. After an OTA update, my Galaxy Tab got into Bootloop. I already tried a data factory reset from recovery but still the same. Also try to flash with Odin, the process ends OK but still in BOOTLOOP. After several Bootloops, it enters recovery and says: "Can't load Android System your data may be corrupt"
This is what the recovery tells me:
View attachment 5581753
Click to expand...
Click to collapse
download latest stock firmware from here
Samsung Galaxy Tab S7 (Wi-Fi) Firmware Download SM-T870 Free Download
Samsung Galaxy Tab S7 (Wi-Fi) Firmware Download SM-T870 Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
and flash it with odin to see
zfk110 said:
download latest stock firmware from here
Samsung Galaxy Tab S7 (Wi-Fi) Firmware Download SM-T870 Free Download
Samsung Galaxy Tab S7 (Wi-Fi) Firmware Download SM-T870 Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
and flash it with odin to see
Click to expand...
Click to collapse
Yes, I have already tried it with the T870XXU2CVCD, but it is still the same.
zfk110 said:
download latest stock firmware from here
Samsung Galaxy Tab S7 (Wi-Fi) Firmware Download SM-T870 Free Download
Samsung Galaxy Tab S7 (Wi-Fi) Firmware Download SM-T870 Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
and flash it with odin to see
Click to expand...
Click to collapse
idk maybe one of the partition is messed up, since there is no twrp for it, you cant flash any custom rom on it, try to ask any other developer to see if they can help you out, also see here for warranty
Samsung Warranty: Check Your Samsung Products | Samsung
Schedule a repair for your Samsung product and review your warranty today. No matter what your issue is, our expert service technicians are here to help.
www.samsung.com
also try to flash
Samsung Galaxy Tab S7 (SM-T870) Combination File
Samsung Galaxy Tab S7 (SM-T870) Combination File - | Cestin.net
Samsung Galaxy Tab S7 (SM-T870) Combination Files download,Flash With this Samsung Galaxy Tab S7 (SM-T870) Combination Flash File you can fix stuck at samsung or logo and bootloop,Fix dead mobile, fix IMEI related issues,
cestin.net
if you can boot up then flash the stock again
zfk110 said:
idk maybe one of the partition is messed up, since there is no twrp for it, you cant flash any custom rom on it, try to ask any other developer to see if they can help you out, also see here for warranty
Samsung Warranty: Check Your Samsung Products | Samsung
Schedule a repair for your Samsung product and review your warranty today. No matter what your issue is, our expert service technicians are here to help.
www.samsung.com
also try to flash
Samsung Galaxy Tab S7 (SM-T870) Combination File
Samsung Galaxy Tab S7 (SM-T870) Combination File - | Cestin.net
Samsung Galaxy Tab S7 (SM-T870) Combination Files download,Flash With this Samsung Galaxy Tab S7 (SM-T870) Combination Flash File you can fix stuck at samsung or logo and bootloop,Fix dead mobile, fix IMEI related issues,
cestin.net
if you can boot up then flash the stock again
Click to expand...
Click to collapse
I have tried to flash the Combination File, I have used the pit, but now it gives me the following error:
please get the approval to use factory binaries (abl)
Do you know how I can solve it? Thanks!
romanrsr said:
I have tried to flash the Combination File, I have used the pit, but now it gives me the following error:
please get the approval to use factory binaries (abl)
Do you know how I can solve it? Thanks!
Click to expand...
Click to collapse
Reach him
afaneh92
forum.xda-developers.com
Offer him some donation for his time/help?
romanrsr said:
I have tried to flash the Combination File, I have used the pit, but now it gives me the following error:
please get the approval to use factory binaries (abl)
Do you know how I can solve it? Thanks!
Click to expand...
Click to collapse
Miraculously the tablet just turned on! Thank you very much for the help friend!
From: How to Unbrick Tab A7 Lite using SP Flash Tool.
CustomAP 2022
The only way to get away from the official firmware. Changes Degoogle (LeOS-TD.2.0 ) A13 GSI Home Launcher For SM-T225 FastbootD ☆☆☆ Tips and Tricks For [ LOS TD Unofficial GSI ] latest 2023-03-24 microG...
forum.xda-developers.com
All process are ...
STEP 1: Download the SP Flash Tool & MTK meta Utility
STEP 2: Download Stock Firmware
STEP 3: Extract Stock Firmware by MTK META Utility
STEP 4: Install MediaTek USB Drivers
STEP 5: Establish Link between Tab A7 Lite and SP Flash Tool
STEP 6: Flash Stock Firmware and Unbrick Device via SP Flash Tool
≥≥≥≥≥≥≥≥≥≥≥≥
Let begin..Step 3 ( if you are in a hurry.) --except step 4,5
SP Flash tool : SP_Flash_Tool_v5.2052_Windows.zip https://androidfilehost.com/?fid=17248734326145726480
MTK META Utility V44 https://mega.nz/file/8HJGXJKD#uvapZWuTits6LkzsW0ZRpmn1RZqbVu34TwCnunxoi2wNew V52 https://romadd.com/mtk-meta-utility-tool-free/
SCATTER FILE FROM A11, A12 Samsung Stock Firmware : make yourself with tools mtk meta util
Howto
1.Download and extract firmware into folder.
2.Open MTK META UTIL
Select right tab "Android ---> Extract Samsung ROM (MTK)
Then select your extracted firmware (folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's creates FIRMWARE_UNPACKED folder. Within all firmware files for SP Flash tool
3. Open SP Flash tool (....import scatter file.)
Connect your tab with Computer. Windows Device Manager will recognize Samsung Tab A7 Lite. If not ...try this
# power Off then connect it to PC via USB cable and hit the Volum down once.
# power Off then connect USB cable with PC one end , press & hold Vol Up + Vol down , then connect one end USB with Tab
Or install this windows Driver.
MediaTek_USB_Drivers.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
IF YOU CAN'T MAKE THIS CONNECTION, U HAD BROKEN TAB MAINBOARD ALREADY. SORRY FOR THAT.
____You can stop now.
- Navigate to the extracted firmware folder which processed by MTK Util
(Firmware_Unpacked) and there should be a scatter text file, something
along the lines of MTxxxx>Android>scatter.txt. Select that file and click Open.
-Doing so will automatically load the required files to their respective partitions.
in the SP Flash Tool.
- Untick the preloader section of the tool as we don’t have to flash that partition.
(Try this first )
- Once done, click on the Download button situated at the top menu bar and
wait for the process to complete.
- As soon as the flashing is complete, you should get the Download OK message.
. You may now remove your device from the PC and turn it on via the Power key (if that doesn’t happen automatically).
Its will flash all extracted files of firmware like Odin
Meet you tab alive again.
Thank you for help , I try later
but , I need fix verified boot enable
again
Difficul said:
View attachment 5701107
again
Click to expand...
Click to collapse
Don't used preloader, tick off
tom.android said:
Don't used preloader, tick off
Click to expand...
Click to collapse
same
tom.android said:
Click to expand...
Click to collapse
i looked and it's not the solution
Today , i connect Tab with computer and
How to fix this ?
mine is still in repair shop he still hasnt fixed it yet it will come in some days if its not fixed i will try this method
actually there is a tool for disabling verification
just use mtk meta utility
so click disable auth bypass and connect then it will stop connecting and disconnecting
Hope it healthy.
zenitsu man said:
View attachment 5707121
so click disable auth bypass and connect then it will stop connecting and disconnecting
Click to expand...
Click to collapse
Ok I use this before use Sp tool every time
and still get the error
prince2047 said:
View attachment 5785071
Click to expand...
Click to collapse
You need to use unlock tool : crask version of buy it
How bricked , tell what u people did to brick to avoid using this guide in the future
ozmage said:
How bricked , tell what u people did to brick to avoid using this guide in the future
Click to expand...
Click to collapse
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Difficul said:
Never flash an incompatible operating system or upgrade without a BL (bootloader) like samsung
Click to expand...
Click to collapse
did you fixed your device ?
Hello, colleagues,
I've bricked Samsung S9+ (SM-G965F). The story is the following:
1. I rooted it with LineageOS 19.1, but after some time of use decided to back it to original firmware
2. Using https://github.com/samloader/samloader I downloaded original firmware for my country (SEK, G965FXXUHFVG5)
3. And using this instruction - https://techbeasts.com/how-to-unroot-samsung-galaxy-s9-and-s9-plus/ - tried to restore original firmware
4. After this phone did not reboot, stucked with white "Samsung" word on the black screen
The error, I guess, was on step (3) above - phone probably was not official and when (too late!) I looked at https://www.sammobile.com/samsung/galaxy-s9-plus/firmware/ I got that, probably, I was need the most widely used European firmware G965FXXUHFVG4 instead of ...FVG5 and, having phone responsive, tried to repeat step (3).
At the end of this procedure, Odin said "RQT_CLOSED !!" and soon reported failed update, while phone stuck in "Downloading... Do not turn off target..." state in 1-2 pixels before the end of progress bar. Now, if I try to boot it, it shows exclamation sign and a message "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" (of course, Smart Switch do not help - it says something about "plugin lost connection" or something like).
Since I tried to write wrong firmware, I then decided, using the following procedure - https://technastic.com/samsung-pit-file-download/ - to repartition it using PTI file according to instructions. It did not help - situation the same, Odin reports "RQT_CLOSED" and phone stucks in 1-2 pixels before the end of progress bar.
Now is the question - whether it's possible to revive the phone? Any comments, suggestions are highly welcome.
Thank you.
You can still flash firmware with Odin from that Emergency screen. Just do button combo for download mode if you get that screen again, flash away. Just make sure you are using correct formware
butchieboy said:
You can still flash firmware with Odin from that Emergency screen. Just do button combo for download mode if you get that screen again, flash away. Just make sure you are using correct formware
Click to expand...
Click to collapse
Thanks for the suggestion. To be more precise - are you about this way? - https://www.droidwin.com/create-samsung-combination-firmware-flash-it-via-odin/ Why I'm asking - I don't see in Odin nothing about 'Combo', there is my screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you
Just use stock firmware
butchieboy said:
Just use stock firmware
Click to expand...
Click to collapse
I'm sorry for misunderstanding. When I use samloader to download firmware, in fact I get enc4 file, which need to be decrypted and result is Zip archive with 5 files inside - BL, AP, CP, CSC and HOME_CSC. So, four of them I can specify in Odin configuration - BL, AP, CP and either CSC or HOME_CSC. When you say 'stock firmware', what exactly do you mean? Some single file of those mentioned above or something else? I will appreciate if you can give more details. Thank you!
Samsung Galaxy S9+ Firmware Download SM-G965F Free Download
Samsung Galaxy S9+ Firmware Download SM-G965F Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
Download firmware. Extract, place AP in AP spot in odin and so on with other files
Thanks a lot, firmware from this site helped, now I'm in. The difference was in CSC files, while other were the same. Thanks again, appreciate your help.