Related
Hi
I have a weird problem...
Sometimes (not always, but like once every two days), my Hero just scrolls to the right in like every app... even on the homescreen
For example:
-on the homescreen, he scrolls to the right, so towards the last homescreen.. I scroll back, but de hero has its own will and scrolls to the right again...
- in the browser the Hero scrolls to every link (like I would scroll with the scrollbal to the right and it jumps from link to link)
- in an app with different tabs (like People) my Hero also scrolls to the tab on the right, so he goes from "all contacts", to "faorites", to 'groups", to "updates and events" etc...
- in messages, when I want to begin typing, the button "send" is selected in green (like I would've scrolled to the right)... when I'm typing, it doesn't occur..only before I've started typing...
also, I've noticed that like in the browser, when I hold my phone horizontally, the problem doesn't occur.. and when I hold it back ertically, the problem is gone (I think....) ...
Anyone who knows this problem ? Pretty weird, I know
Thanks in advance !
greets
PS: maybe it has to do with the G-sensor (cfr. holding horizontally: no problem...)
I guess that your problem is the trackball, it may be a bit loose on one side so that it will roll sometimes to the right.
Mine does this from time to time. I think it is dirt under the trackball. I just sping the trackball round a few times and it goes away.
HTC support instructed me to send the device to warranty repair due to this issue. Haven't done so yet, though.
Same here, also i think that is a only dust.
After re-spining TB it goes back to normal state
This has been demonstrated a common problem with the Hero. They told me to restore the firmware which is bull. Something's broken, hardware or software we don't know but I should think hardware.
Yeah, I'm still not sure whether this issue is software or hardware related. The whole dust thing seems a bit weird. Especially when my Hero accidently did this -right- after I got it out of the box and started it for the first time.
It's annoying though, but a flick of the scrollwheel always fixed it so far. (or reset)
Ah... I posted previously about this- My fault. Looks like a common problem.
Has anyone found a solution that works?
I also have this problem, for a while I thought it was only me...
I have same problem from time to time, not very frequently.
It's not a "dirt" problem, it has something to do with magnetic fields, which affect the trackball's logic. That's why you see this from time to time, at special areas.
Since a couple of days I have a new problem... the automatically scrolling to the right doesn't seem to appear anymore, but now I can't scroll anymore to the right with the trackball... all the other directions work... could this be software-related then (it cannot scroll anymore in the same direction it used to scroll automatically to...) ??
if it is just dirt... nay idea how to clean that? I've tried rolling with the TB a lot in different directions and even tried with a light moist cloth...
Pr0sper said:
It's not a "dirt" problem, it has something to do with magnetic fields, which affect the trackball's logic. That's why you see this from time to time, at special areas.
Click to expand...
Click to collapse
What, the Earth's magnetic fields?!
Actually that would explain a lot! I followed the textbook advice, and re-flashed the ROM. All was ok until this morning, and the screen started leaping left, rather than right!
...So I've reset the device, and downloaded the ROM again, and reflashed.
I have to say, I'd be surprised if it was a "dirt" problem, because every HTC I've ever owned has been very well sealed. (Unlike my Nokias!)
Is there any way to test if it's magnetic? (I guess "with a magnet...")
Ths has been discussed in greater detail here.
http://forum.xda-developers.com/showthread.php?t=546206
Hmmm... no closer to an answer though. I'll see if my re-flashing helps and will let you know.
I'm not sure it's worth returning my unit: sounds like it's a generic defect.
My network definately alters a lot as I travel a great deal. And I'm often in/out of Wireless zones.
Yesterday I tried the simple solution I turned off the device... put it back on.... and everything seems to work properly now even the trackball scrolls great again... don't know about you guys, but this solved the problem for me sometimes, the answer is just around the corner...
It happened on mine today (this morning when I came in to work) but it went away after it warmed up. It was cold this morning (2 degrees C or so).
It's not associated with WiFi, and I've tried resetting, reflashing and even switching off.
The problem keeps coming back though. It's completely random and really annoying...
singing hound said:
It's not associated with WiFi, and I've tried resetting, reflashing and even switching off.
The problem keeps coming back though. It's completely random and really annoying...
Click to expand...
Click to collapse
I am convinced this is a software issue. The problem is easy to reconstruct:
It is as simple as this: If there is data traffic in the background while on Edge network, this happens. I cant see how this could be a hardware problem. I have found this since I am on a train 3 hours every day and has had a lot of time to figure this out.
Sadly I havent found a way to disable edge network.
raskall said:
I am convinced this is a software issue. The problem is easy to reconstruct:
It is as simple as this: If there is data traffic in the background while on Edge network, this happens. I cant see how this could be a hardware problem. I have found this since I am on a train 3 hours every day and has had a lot of time to figure this out.
Sadly I havent found a way to disable edge network.
Click to expand...
Click to collapse
That's useful: I also commute daily and I think yours is a likely solution.
I just wonder if this is a problem with a batch of Heros... otherwise you'd think everyone would be suffering. It sounds like if I exchange my unit, there's every chance the new one would have the same problem.
Guys,
Quick question.
Is there a setting somewhere that allows the gear fit to NOT end the workout if stationary (or bad GPS) after a preset time?
Scenario:
Whenever I am cycling, I inevitably come across traffic lights and have to stop, after some time (normally once I get going again) the gear fit will display a message "No movement detected, workout stopped" or something along those lines.
If I acknowledge the message, then its ok, workout continues until the next stop, but if I don't notice it, and sometimes I don't feel the vibration when cycling, then eventually the workout will stop all together, and I only find out next time I check the device.
This is very frustrating, surely I don't have to keep checking the device to see if it thinks the workout is stopped, very dangerous when cycling.
So currently yes I have to periodically check to make sure it is still recording, if I just leave it, guaranteed it will stop recording without me telling it to.
Anyone else experience this when cycling?
Otherwise great device!
further to this..
yesterday on my ride home I got the "workout stopped" message when I had been moving for at least 3-4 minutes.
so not sure how it is calculating movement or what the threshold is.
luckily i noticed and acknowledged the message and the workout continued.
still very annoying.
surely someone else has experienced this, or am I the only one using the gear fit for cycling?
If i initiate the cycling workout from the app on the S5, it does not record heart rate, even though the device is paired.
Yes, I have found this as well, and annoyed me too. You could go for a 4 hr ride, and it's stopped after 20 minutes haha.
THAT would be annoying!
This is problem for the newest firmware i think, bcoz early i don't have this problem...
scoobydoo_nz said:
Yes, I have found this as well, and annoyed me too. You could go for a 4 hr ride, and it's stopped after 20 minutes haha.
THAT would be annoying!
Click to expand...
Click to collapse
Yeap absolutely rubbish!
I am yet to accurately record a workout and I have had the thing for nearly a week.
Tempted to take it back just doesn't do anything it is supposed to do, except send notifications that seems to be the only thing working properly.
I have same problem too. Samsung need to fix this soon with firmware update. Otherwise it will be a great product.
I suffer from the same problem. Anoying..... And if you track from the S Health app have you notice that the distance is way off from what the bike computer measures??? 4 riders, 4 bike computers from Sigma, all measured the same, S Health reported 2,5km LESS.......
I was really fed up with Gear Fit and I've just return it to the seller.
I think i'm going to wait for better devices (or an important upgrade)
I bought it because notifications and tracking options, but it was disconnecting all the time from the cellphone.
Bye bye gearfit!
The movement detector really sucks in this watch. The other day the pedometer prompt came on congratulating me on reaching my daily steps goal. The problem is that it was early morning and I did not go anywhere to reach the 10,000 step goal. Then it occured to me, it must of picked up the movement of me rubbing one out...
Hi,
While I think my Gear Fit is a very useful device it constantly lets me down on the training side. Maybe I'm doing something wrong?
I bike quite a bit and I like the way the Health app stores my map speed etc. the way it does. Once in a blue moon. The problem is that 9 times out of 10 the cycling app will shut down all on its own while I'm still in the middle of my training session. Hysterically irritating to have all these half-recorded sessions in my phone. And there's no way I can check on progress while cycling. To get to the Health app and then on to cycling on the Gear Fit would be sure death when speeding along at 35 kph. At least for someone as unbalanced as myself.
So am I doing something wrong? Is there a setting for the Gear Fit that I've missed? Is anyone else having this problem, or am I just stuck with a buggy example of the otherwise very nifty piece of engineering? Oh, and whoever designed the strap for the Fit must absolutely have had repeat business in mind! It's fallen off, like, 100 times of its own accord. A miracle that it's still in my possession.
Grateful for any advice on the "keep alive" topic.
Thanks/M
McHan said:
Hi,
While I think my Gear Fit is a very useful device it constantly lets me down on the training side. Maybe I'm doing something wrong?
I bike quite a bit and I like the way the Health app stores my map speed etc. the way it does. Once in a blue moon. The problem is that 9 times out of 10 the cycling app will shut down all on its own while I'm still in the middle of my training session. Hysterically irritating to have all these half-recorded sessions in my phone. And there's no way I can check on progress while cycling. To get to the Health app and then on to cycling on the Gear Fit would be sure death when speeding along at 35 kph. At least for someone as unbalanced as myself.
So am I doing something wrong? Is there a setting for the Gear Fit that I've missed? Is anyone else having this problem, or am I just stuck with a buggy example of the otherwise very nifty piece of engineering? Oh, and whoever designed the strap for the Fit must absolutely have had repeat business in mind! It's fallen off, like, 100 times of its own accord. A miracle that it's still in my possession.
Grateful for any advice on the "keep alive" topic.
Thanks/M
Click to expand...
Click to collapse
Same here, but I have missed all my bicyclings. But I have solved issue. Taking pulse (beat of heart) off then the training have gone OK. I am a male and have hairs on my wrist. I haven't tryed if I would keep Gear Fit like womens do, wrong way around. I mean the display is under wrist and where are not any hairs or you have to keep your strap tighter than now.
Newest version bring pause function to Gear Fit training, but I agree that better would be if I can myself start and stop the bicycling training. It could stop automatically if you stand too long in traffic signal; GPS signal stays too long same. If this is true, then the clock is dangerous incitementing to run a red lights.
The pulse off settings is here: biking/ scroll right one screen (on landscape mode)/ pulse: take off tag of pulse.
EmDzei said:
Same here, but I have missed all my bicyclings. But I have solved issue. Taking pulse (beat of heart) off then the training have gone OK. I am a male and have hairs on my wrist. I haven't tryed if I would keep Gear Fit like womens do, wrong way around. I mean the display is under wrist and where are not any hairs or you have to keep your strap tighter than now.
Newest version bring pause function to Gear Fit training, but I agree that better would be if I can myself start and stop the bicycling training. It could stop automatically if you stand too long in traffic signal; GPS signal stays too long same. If this is true, then the clock is dangerous incitementing to run a red lights.
The pulse off settings is here: biking/ scroll right one screen (on landscape mode)/ pulse: take off tag of pulse.
Click to expand...
Click to collapse
Hi EmDzei and thanks for the reply.
Unfortunately this did not solve the problem for me. Turned off the heart-sensor and have now tried two biking sessions but the Gear device stops recording after 10 and 25 minutes respectively. Pretty much the same results as before. A real pain in the nether regions! Does no one else have this problem? I've noticed that the phone "pings" every now and again and I'm wondering if it momentarily loses BT contact with the watch and that this somehow stops the Health recording. It does this at night also when I have the blocking mode enabled (which irritates the H-ll out of my wife, the soft pinging, that is). Any thoughts on this...?
Thanks/M
McHan said:
Hi EmDzei and thanks for the reply.
Unfortunately this did not solve the problem for me. Turned off the heart-sensor and have now tried two biking sessions but the Gear device stops recording after 10 and 25 minutes respectively. Pretty much the same results as before. A real pain in the nether regions! Does no one else have this problem? I've noticed that the phone "pings" every now and again and I'm wondering if it momentarily loses BT contact with the watch and that this somehow stops the Health recording. It does this at night also when I have the blocking mode enabled (which irritates the H-ll out of my wife, the soft pinging, that is). Any thoughts on this...?
Thanks/M
Click to expand...
Click to collapse
Have to notice here at start that I am not so specialist for this case. But I can give one or two hint.
This hint could hit forest with full speed. I don't know if the bluetooth and WLAN are on same chip. But on WLAN (= Wi-Fi) extra settings and its sleep mode there are three settings: always, only when connected and never (increase mobile data). Simple translations from finnish. =) I use this middle settings: allways, when device is connected. I wrote this hint because you wrote that your device seems disconnect 10 - 25 minutes. WLAN disconnecting time is similar: 15 minutes, if on sleep mode. As I said, this could be very very wrong information.
OK. Next our possible version differents. My Gear Fit firmware is R350XXU0BNE5. My Gear Fit Manager version is 1.67.0523 and I use it on my Samsung Galaxy S4 (GT-I9505) stock un-rooted firmware version UFNB9. Last five serial character of Gear Fit are LRXW. I do not use blocking mode on Gear Fit. I use it on my phone and disable sync at nights.
Today I tested and bicycled 26,52 km. I visited two times on markets and paused my "training". All session took 1:44 hour (so beautifull day and sunshine). Does your bicycling have Pause button when you started the trip? My previous version of this doesn't and with it I had problems with cutted bicycle trainings. My phone lay on own bicycle mounting holder, so the bluetooth signal is very stong and distance ~50 - 60 cm only.
Uh, last comments. You have of course made a Samsung account and it sync works OK? I think also that keeping LTE off when biking outside of the city fairway, if it is not strong signal. Good to try in this desperation, eh.
EmDzei said:
Have to notice here at start that I am not so specialist for this case. But I can give one or two hint.
This hint could hit forest with full speed. I don't know if the bluetooth and WLAN are on same chip. But on WLAN (= Wi-Fi) extra settings and its sleep mode there are three settings: always, only when connected and never (increase mobile data). Simple translations from finnish. =) I use this middle settings: allways, when device is connected. I wrote this hint because you wrote that your device seems disconnect 10 - 25 minutes. WLAN disconnecting time is similar: 15 minutes, if on sleep mode. As I said, this could be very very wrong information.
OK. Next our possible version differents. My Gear Fit firmware is R350XXU0BNE5. My Gear Fit Manager version is 1.67.0523 and I use it on my Samsung Galaxy S4 (GT-I9505) stock un-rooted firmware version UFNB9. Last five serial character of Gear Fit are LRXW. I do not use blocking mode on Gear Fit. I use it on my phone and disable sync at nights.
Today I tested and bicycled 26,52 km. I visited two times on markets and paused my "training". All session took 1:44 hour (so beautifull day and sunshine). Does your bicycling have Pause button when you started the trip? My previous version of this doesn't and with it I had problems with cutted bicycle trainings. My phone lay on own bicycle mounting holder, so the bluetooth signal is very stong and distance ~50 - 60 cm only.
Uh, last comments. You have of course made a Samsung account and it sync works OK? I think also that keeping LTE off when biking outside of the city fairway, if it is not strong signal. Good to try in this desperation, eh.
Click to expand...
Click to collapse
A-HA! I think You hit on the solution to the problem in Your very last comment. I've been trying various combinations of settings on both the Gear Fit and on the phone, but to no avail. Then finally it struck me that, yes! I have been experiencing issues when shifting between LTE and other modes, and that possibly possibly this could have something to do with my problems. And so, sure enough, when I blocked off 4G and went for my daily today I finally got the whole ride recorded in the phone!
So many thanks for putting me on this track and fining the solution for me, EmDzei!
Hi everybody!
I just stumbled onto this website and I'm amazed to see how many things I can learn from you guys what to do with my watch. My Amazfit is new, updated, but after the battery dropped dead, I can't seem to access the Sleep, Steps, Compass, GPS, and Monitor.
I am really curious what can I do to make my watch work again, as I found it perfect to my all activities. The sleep function is really important for me as I'm fidgeting at night and I'm under mild medication to sort my problems. This watch was vital for me.
Thanks heaps for any help.
ps: I restarted a few times, I even reset it to factory settings. Every single time I restart it, I get an "Optimising App1, Total 1" message for a few minutes, then I can't access most of its function.
Cheers.
You can see only clockface? I've had that problem that Amazfit got stuck on one pericular watchface, had to change it via phone app, it took some time, and after restart everything was ok. Try that
Sent from my LG-G3 using Tapatalk
Thanks for your reply. It's not stuck on one single face, I can change them. The watch works fine apart from the fact that I can't access GPS, Monitor, Pace and Sleep. Even after restarting, unpairing n pairing, updating etc...
I think you're pretty much in the same boat as me. I'm still trying to figure it out for the past few month when I got into that problem as well. The only time it worked was few days ago, where I went and flashed the Pacified Rom, and back to 1.3.3a. It only worked for about a day or 2 before going back to the problem again. I suggest that since it's new, get it replaced as soon as possible. I've been trying to get mine replaced but my seller is ignoring me and Aliexpress is not much of help.
Isn't there any down/upgrade that would solve this situation?
I mean, I bought it from the same website, no warranty/refund available. That's a pity.
Do you have any tutorial on how you flashed the Pacified Room and back to 1.3.3.a?
Thanks a lot, Alex.
jules25 said:
Hi everybody!
I just stumbled onto this website and I'm amazed to see how many things I can learn from you guys what to do with my watch. My Amazfit is new, updated, but after the battery dropped dead, I can't seem to access the Sleep, Steps, Compass, GPS, and Monitor.
I am really curious what can I do to make my watch work again, as I found it perfect to my all activities. The sleep function is really important for me as I'm fidgeting at night and I'm under mild medication to sort my problems. This watch was vital for me.
Thanks heaps for any help.
ps: I restarted a few times, I even reset it to factory settings. Every single time I restart it, I get an "Optimising App1, Total 1" message for a few minutes, then I can't access most of its function.
Cheers.
Click to expand...
Click to collapse
You could retry reinstall firmware perhaps...
Search here how to. (or update with newer firmware)
jules25 said:
Isn't there any down/upgrade that would solve this situation?
I mean, I bought it from the same website, no warranty/refund available. That's a pity.
Do you have any tutorial on how you flashed the Pacified Room and back to 1.3.3.a?
Thanks a lot, Alex.
Click to expand...
Click to collapse
First you need to unlock the bootloader. To do that, you can have a look at it here.
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unlock-bootloader-warning-void-t3654011
To flash the rom to PACEfied follow the link here. You could try the latest version .35, but that didn't work for me as I got stuck in the update loop despite using fastboot to continue, so I ended up using version .32. Instructions are all there
https://forum.xda-developers.com/smartwatch/amazfit/rom-pacefied-amazfit-huami-amazfit-t3539431
To flash it back to 1.3.3a, go through this link.
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-convert-xiaomi-huami-amazfit-t3532508
Currently trying to repeat the steps I did on how to get everything working minus the GPS running app. Now I'm at .29 of the Pacefied ROM. Waiting for my battery to be completely drain and wait a day before charging it and flash it back to 1.3.3a. Will let you know if it's a success or not.
I've come to a conclusion that this is related to hardware problems. Somehow even draining it for 3 days still didnt' do anything and now the battery doesn't even last up to a day.. Looks like we're pretty much unlucky to get these faulty units. Sad.
Hi Alex! My Amazfit is working fine now, I think by the greatest of coincidence. Let me tell you what happened.
Yesterday I ran out of battery and I chucked in the cradle in order to charge it, but I couldn't see any charging. Then I twisted, rotated and changed its position and nothing happened.
Then I realized the contact plates might be dirty. With a cotton bar and an alcohol pad, I cleaned them thoroughly and guess what, once I restarted the watch it works perfectly.
I'm not sure this is the reason or I've been lucky, but honestly speaking I'm afraid to restart it again. So I will keep charging it religiously avoiding any discharge. My other problem is that I need to get a new phone.
Would I be able to pair my new phone to Amazfit without "restarting to factory settings"?
Thanks.
jules25 said:
Hi Alex! My Amazfit is working fine now, I think by the greatest of coincidence. Let me tell you what happened.
Yesterday I ran out of battery and I chucked in the cradle in order to charge it, but I couldn't see any charging. Then I twisted, rotated and changed its position and nothing happened.
Then I realized the contact plates might be dirty. With a cotton bar and an alcohol pad, I cleaned them thoroughly and guess what, once I restarted the watch it works perfectly.
I'm not sure this is the reason or I've been lucky, but honestly speaking I'm afraid to restart it again. So I will keep charging it religiously avoiding any discharge. My other problem is that I need to get a new phone.
Would I be able to pair my new phone to Amazfit without "restarting to factory settings"?
Thanks.
Click to expand...
Click to collapse
Sweet. I think I did something similar to clean the plate. But alas mine still doesn't work as we speak. I think restarting it is ok. But because I unpaired it with my phone, the watch went into factory reset that got me back to where it was not able to work. Maybe before you unpair with your current phone, on your new phone try logging in. If it's like the mi band 2, it should prompt you to pair via BT rather than QR code.
I'm sorry rant ahead. But I've had enough.
I bought the Stratos, because I didn't really like my Mi Band 3 (constant connection problems and almost invisible screen in daylight). I wanted to buy the Bip, but I said, what the hell. Let's go big. Stratos also looks good (Bip does not). The transreflective always on display is also great. But here the good things end.
1. The watch is slooow. Sometimes it doesn't register a touch, and sometimes it registers a ghost touch. The menus are bad, the layout is bad, the navigation is bad (and slow). The watch is also way too thick.
2. The Amazfit app is abysmal. Once the acitivity is recorded, it cannot be edited in any way. Did you press "walking" when you started running by mistake (It can easily happen - see above)? Too bad. You cannot correct it. Amazfit can draw pretty GPS pictures and graphs, but that's about it. And it's so buggy, it's more or less unusable (see below). There is no internet page, like literally every other app has (Strava, Endomondo, Runkeeper), where you could edit the data. There is no homepage. There are no official help forums.
So, even if the watch and app were completely bug free, the whole package would still be, in best case, average. But they are not bug free. And that is an understatement of the century. I've seen buggy apps and gadgets before, but this one takes the cake.
3. When I got the watch, the battery life was a real rollercoaster. The watch could go form 100% to 0 in a few hours or in 5 days. Sometimes reboot or factory reset helped. And that is true for the watch as a whole. Three to four factory resets in a months is (was - it doesn't work anymore -see below) almost necessary for Stratos to work "normally".
4. Caller name on the watch started working with Amazfit app 3. It never worked before. So, this basic (and advertised) functionality started working almost a year after the watch was released.
5. So, you start to run/bicycle/whatever. You choose the appropriate workout, you wait for the GPS, you start, and.... nothing. You are riding a bicycle and the watch says your speed iz zero.
6. You are running, and suddenly you pace starts to drop like a stone. So, I run little below 5.00 min/km. Yesterday I was running, and suddenly I was at 11.00 min/km. Not in reality, just on the Stratos. I always run 6 km, but Stratos measured 4 km. A day before 5 km. I actually ran 6 km, as I know the way. Thank god for Strava, because when I got home and the Strava synced, the running length(and pace) was correct. But only in Strava. Amazfit app and the watch itself got the data wrong. No, I don't know, how that is possible.
7. So, I was bicycling downhill. Suddenly, my hearbeat goes to 160. 170. 180. Am I dying? I feel the chest. Everything is normal. The watch is just acting up again. A few days after that, I was bicycling uphill, usually my heartrate is somewhere around 130-140. Suddenly, for no apparent reason, my heartrate drops. 60. 50. 40. And I am paddling uphill in 35 degrees C! Am I Lance Armstrong? No, It's just the watch.
8. A few days ago heartrate and steps stopped syncing with the app. The watch is at 6000 steps and Continuous HR is on (and seems to work on the watch), but the app is at 0 steps and "no heart rate data. Syncing doesn't help. Rebooting the watch doesn't help. Factory reset doesn't help. Restarting the phone, reinstalling the watch, creating a new account doesn't help.
Let's end this. I paid 160 EUR for this POS. After many months on the market, even the basic functionality of the watch does not work. What does work now, might not work tomorrow, and what works, works badly.
Why are things like this? It's the age old truth: when you buy the product, you don't just buy plastic, steel and glass, you buy a service. You buy programmers, that will get your product running long after you bought it. And that's why Amazfit products just seem cheap. Because you just bought the plastic. Nothing else.
You got a broken watch, claim warranty.
I would also add there might be a problem with your smartphone bluetooth as well. I used Mi Band 1, 2, 3 and now 4. I also had 2 smartwatches and now Stratos. I also changed 2 smartphones and I never ever had connection problems with Mi Band on any version of it. Mi Band for me is by far the most stable bluetooth connection I've ever used on any bluetooth device and I have over dozen various bluetooth devices. Stable connection, along with battery life is why I'm still loyal to Mi Band. I had various situations where I couldn't connect to plain bluetooth speaker, or sometimes even Stratos disconnects and in each case Mi Band connection is the only one that would still be stable. But that is just my personal experience as it's impossible to account for all the different hardware out there.
Agree with you. I have an Verge, which is, till the moment, a money waste.
Software is the problem, let's see if Xiaomi do something.
hpto said:
Agree with you. I have an Verge, which is, till the moment, a money waste.
Software is the problem, let's see if Xiaomi do something.
Click to expand...
Click to collapse
You will wait forever, Xiaomi has nothing to do with Pace, Verge or Stratos...
lfom said:
You will wait forever, Xiaomi has nothing to do with Pace, Verge or Stratos...
Click to expand...
Click to collapse
Amazfit don't are an trademark from Xiaomi?
Btw, a money waste. Mi band do the job and far better.
hpto said:
Amazfit don't are an trademark from Xiaomi?
Btw, a money waste. Mi band do the job and far better.
Click to expand...
Click to collapse
No, it's Huami's.
Thank you all for replies!
I don't think the watch is broken (in a sense, that warranty should be claimed) and I'll tell you why.
I may have been a little misunderstood in my first post (English is not my first language). The watch doesn't act up all the time. But frequently enough, that it cannot be relied upon. I don't need a watch that works 70 % of the time (which this one does). So, let me add a few things to my points in my previous post:
5. That happened twice (see number 5 in my first post). Rebooting the watch helped. And let me stress again, that it would happen a lot more often, if I didn't reboot or factory reset the watch every time it starts to act up (3-4 times per month).
6. If that was a hardware error (se number 6 in my first post), GPS data would be wrong (this happened only during my last two runs!). But the GPS data that the watch recorded during the run was correct. If it wasn't, Strava would be wrong, too. Activity (run) was measured (interpreted?) incorrectly by the watch and Amazfit app. Strava got the same (raw?) data and it gave correct results (kilometers, pace). If the watch was faulty, the GPS data would be faulty, too. But the hardware, it seems, is fine. Just the software is bad.
7. HR monitoring is just bad on this watch. I don't think I'm the only one that noticed that.
8. Steps and HR data syncing with the app currently works. It started to work the next day. But I noticed something strange. When syncing wasn't working, the Amazfit app said for steps and HR "08/17 19:52" (something like that, I don't remember the exact time). But it was only 11 o'clock! So, the app was claiming, that the last sync with the watch was in the future. Probably that's why it wasn't syncing. And that is not a harware error, it's the software.
So, I don't think the watch is faulty, it's just the software that's bad. That was my point all along. Right now, the watch is working fine. It was working fine yesterday and the day before that, when I was bicycling. But that is not enough. I want a watch that works all the time.
Amazfit stratos 3.0: poor watch
The watch is unreliable, sunset and sunrize notifications come and go without reason. Very disappointing.
You could use my app for sunrise and sunset times.
https://forum.xda-developers.com/smartwatch/amazfit/app-amazfit-sun-widget-t4023903