Related
OK. Like a lot of people, I was horrified to discover that my Mac could no longer use my Hermes' bluetooth connection (DUN) after I upgraded to AKU 3.3. Microsoft lovingly removed DUN and added PAN, which MacOS doesn't support yet (rumors are that 10.4.9 or 10.5.0 will).
So I suddenly was left without a way to connect to the 'net using my phone and my MacBook Pro.
Plugging it up USB didn't do anything -- the Mac had no idea what the phone was, and didn't know how to use it for anything.
Enter MarkSpace MissingSync. I installed the latest version (3.0.1) on my Mac, and plugged in my phone to sync it up. By chance, I ran an 'ifconfig -a' in a terminal window, and noticed this:
Code:
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 80:00:60:0f:e8:00
media: 10baseT/UTP <full-duplex> status: active
supported media: 10baseT/UTP <full-duplex>
So MissingSync is establishing a connection using a faked IP address. OK. Interesting. So I unplug the phone, and go into the all new "Internet Sharing" app on my phone, set it to USB and turned it to connect. I plug my phone back in, and MissingSync tries to start up (and fails). But the IP (en2) is still there. I turn off my Airport (wireless) connection, make sure Bluetooth is disabled (to make sure).. and do a netstat -rn, and lo and behold, my Mac has suddenly taken on my phone as a default gateway.
Code:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.1 UGSc 9 40 en2
127 127.0.0.1 UCS 0 0 lo0
And... I'm on the 'net. I didn't have to create any connections, I didn't have to add any routes manually. Nothing. It just worked. (Yeah, I'm amazed, too).
Everything works. DNS, SlingPlayer, Entourage w/ Exchange.
I'm getting around 900/kbps down, 600/kbps up on Cingular/AT&T. Of course I live about 2 miles from Cingular HQ, so that's probably to be expected..
In MissingSync, turn *off* USB syncing, and it won't throw as many errors -- just sync via Bluetooth, but the drivers are still there, so it still comes up with an IP address and pseudo-ethernet device.
MarkSpace needs to market this. Awesome. It's not as convenient as bluetooth, but it's a lot faster, and you have the added benefit of charging your phone at the same time.
oh.. and one more thing... you can still use your phone for voice phone calls (when you're on 3G), and data. It works just like your're not plugged into it. And you can use a bluetooth headset with your phone while you're connected.
edited: make sure "use advanced usb networking" is turned OFF in the Settings>Connections page on your phone.
Wow, just tried this myself on cingular as well, 150k/sec down and 90k/sec up using EDGE. Extremely easy as well, just kinda works by itself if you have MissingSync installed. Posting using my TYTN right now actually.
I'm on the medianet unlimited plan so I connect through wap.cingular. Will I get hit for any additional data charges for tethering?
birdman666 said:
Wow, just tried this myself on cingular as well, 150k/sec down and 90k/sec up using EDGE. Extremely easy as well, just kinda works by itself if you have MissingSync installed. Posting using my TYTN right now actually.
I'm on the medianet unlimited plan so I connect through wap.cingular. Will I get hit for any additional data charges for tethering?
Click to expand...
Click to collapse
Very doubtful, although I don't know for sure. My phone is set to use MediaNET, and uses wap.cingular. I have PDA Unlimited Connect. From all appearances on Cingular's billing page, a notebook hooking into your phone via this method just looks like ordinary phone data to Cingular.
Now... I wouldn't use this as a primary internet connection. I'd bet if you put several gigs through the phone, they're going to get suspicious.
I actually use around 4-5 gigs a month normally (just with ActiveSync polling for mail and normal use), and they've never said anything to me.. so.. who knows.
Unfortunately, it's so difficult to get info from Cingular/AT&T these days (I'm still trying to get my [email protected] to work)..
My billing cycle is up in 7 days -- I will post back here if I see any different charges on my bill.
If this works, I'm going to hump your leg.
wow, works. time to start humping. i love you. please, bear my children.
btw, definitely worth adding to the wiki.
I am assuming that disabling the connection in Internet Sharing restores Missing Sync's normal (supported sync) functionality? Great pick-up. I already have Missing Sync and my 8525 will be here on Wednesday. Thanks.
Damn, I can't afford Missing Sync
Oh well, I bought it anyway. I'd already played with version 2.5 so I knew it was starting to get good. I can make use of some of the other features, (like importing my cameraphone snaps into iPhoto) but this internet sharing feature is why I bought it. And it works just as you said:
1) Run "Internet Sharing" on the phone with 'PC Connection' set to USB.
2) Plug into the Mac.
In fact "Missing Sync for Windows Mobile" shows up as a network interface in System Preferences / Network, too.
This is actually a lot nicer that the old way I used to do it. Before AKU 3.3 and Missing Sync 3 I was getting Internet access on my iBook over Bluetooth using Internet Connect and a lot of faffing around with modem scripts. I eventually found one that worked.. .but I always had to 'dial' 3 times before it connected and it took about 2 minutes to get a connection.
Now I can just plug in and go ... and my phone doesn't need a separate power supply to keep me connected all day. ** very happy **
(Yes, they should really advertise this!)
i'd really like my hermes to work on my Linux box, since I use it as my main system over XP.. i read a few articles regarding this, and it turns out the older version of synce worked on most HTC devices.. but for some odd reason the new ones dont seem to.. someone did mention that WM5 devices weren't supported for now.. the older WM2003 does tho..
if it makes any difference, I'm on Ubuntu Linux 6.10 32bit version..
any help is appreciated..
mizuchi said:
i'd really like my hermes to work on my Linux box, since I use it as my main system over XP.. i read a few articles regarding this, and it turns out the older version of synce worked on most HTC devices.. but for some odd reason the new ones dont seem to.. someone did mention that WM5 devices weren't supported for now.. the older WM2003 does tho..
if it makes any difference, I'm on Ubuntu Linux 6.10 32bit version..
any help is appreciated..
Click to expand...
Click to collapse
I followed the (lenghty) instructions on the synce site, and it works for me with my TyTN. I have not set up contact syncing, but I can browse/copy/run stuff from my Ubuntu 6.10 installations on my TyTN.
i'll give it another shot.. thanks for the confirmation..
jmat said:
...So I unplug the phone, and go into the all new "Internet Sharing" app on my phone, set it to USB and turned it to connect. I plug my phone back in, and MissingSync tries to start up (and fails). But the IP (en2) is still there. ...
Click to expand...
Click to collapse
I don't have en2 when connecting in Share mode
MDA Compact III
What version of Missing Sync are you using? It's working for me using version 3.01
It's 3.0.0 (315) and it reports as the latest.
Well that's clearly not true I suggest you download the new version from the site (I only got this a few days ago).
Upgraded to the 3.0.1 (downloaded from the site). The client on the phone upgraded as well. Still nothing. On the sync mode there is en2 connection (with orange status) in the network preferences. When I activate the sharing mode it disappears. Checked in terminal as well.
And you're *definitely* using AKU 3.3 on the phone?
Izzard-UK said:
And you're *definitely* using AKU 3.3 on the phone?
Click to expand...
Click to collapse
I'm sure it's 3.x but may not be 3.3. How do I check this?
So, can it use bluetooth to link up my Hermes (AKU 3.3) and connect to the internet from my macbook thru the Hermes??
bowen.chau said:
So, can it use bluetooth to link up my Hermes (AKU 3.3) and connect to the internet from my macbook thru the Hermes??
Click to expand...
Click to collapse
I don't believe so, I've only tried using the "USB" setting. Besides, the phone gets power through the USB cable and more bandwidth. There is no advantage to using Bluetooth except not needing a cable!
Is it possible to use ICS with wifi connection instead of cellular connection? Would be useful for a makeshift wireless adapter if your regular NIC or wireless NIC fails.
It seems that even if I have a wifi connection already going and then I launch ICS and connect, it still tries to dial out and use the cellular connection. You would think if it can share cellular data it could share wifi data just as easily but maybe im missing something.
Back in the early days of WiFi internet sharing the private interface was changed to WiFi with a manual registry edit. It might be possible to change the public interface to USB instead of defaulting too the cellular radio. It would probably take a fair amount of troubleshooting, but I'd think it would be possible. I think the entries were at HKLM\Comm\ConnectionSharing. Might be a starting point...
Search for WMWifiRouter
WiFiRouter
WiFiRouter works by making your ppc into a virtual access point. Then you can share the internet through it.
Last time I looked however, the author had withdrawn the program from circulation at version 0.91. There must be some problems with it because the author indicated that he would release a new version once he ironed out some bugs. If it is not back in distribution yet, you might be still able to find it on a torrent site. If not, PM me and I will send you the cab. Some of the cab collections at ppcgeeks ftp have it inside too. One good collection to check is Alex's.
I have used it and it works.
-------------------------------------------------------------------
VZW XV6800 Stock 1.30 radio dcd 1.7.0 customized rom. freedom mini keychain gps
Edit/Delete Message
wmwifirouter is not what he's looking for. That is still using your phones internet. He wants to see how he could use the phone as a Network card, using the wifi connection, as oppossed to the sprintpcs connection.
I too would be very interested in this happening, if anyone knows of a way please tell.
ok, but why ??
Why would you actually want to do this anyway ??? I will look into it but it makes no sense when a USB WiFi dongle is $30 or so and does not run your phone down to use it, why would you want to use your phone as a very expensive USB WiFi card ??? Maybe I am missing some golden benefit ????
I dont get it either, but he did say in an emergency if your wifi went out.
Thank you for the responses.
Yes, it would be useful if your wireless nic went out (or regular nic for that matter) just to have something to use for the moment. Or maybe you brought your computer to a friends house and hes out of ports or you dont want to run 50ft cable to his kitchen table
But the titan has wireless, it has internet sharing, why doesnt the wireless show up in the list of available networks? I'm not saying its an all important feature but it would be yet another cool thing your phone could do.
i looking to use my mogul as a wifi access point (sharing Spint Vision thru wifi)
i tryed the procedure to mod the registry to enable it but i cant get it to work.
anyone know the exact procedure for the mogul
btw i also checked out WMWifiRouter...looks like it's no longer free
I also wanna know
Look the idea is simple. So where is the phone ICS telling it to use the celluar line and not allowing the option of the wifi?
Pls any one contact me. Its a cool feature for a phone
Fr3nZy said:
i looking to use my mogul as a wifi access point (sharing Spint Vision thru wifi)
i tryed the procedure to mod the registry to enable it but i cant get it to work.
anyone know the exact procedure for the mogul
btw i also checked out WMWifiRouter...looks like it's no longer free
Click to expand...
Click to collapse
I bought software called Walking Hotspot, which essentially turns my Mogul/Titan into something like a Mifi, sharing my cellular data with my laptop. Otherwise known as tethering.
I only use it for emergencies because I am not sure if Sprint can tell that I am tethering. I believe if Sprint detects unauthorized tethering they will charge 4 cents per kilobyte of data .. which is very harsh!
-----------------------
Jav Atar
I am seriously frustrated here:
I have an Ameo 16 GB (T-Mobile UK) and for the 1st couple of weeks remote desktop was working fine, then suddenly it stopped working.
I thought I broke the settings somewhere, so I double-checked everything. The T-Mobile Ameo comes with the default T-Mobile Internet connection pre-configured. It actually states "This connection is pre-configured. It cannot be modified."
The default settings are programs that auto connect to the Net should connect using the default T-Mobile Internet connection, and programs that auto-connect to a private network should use "My Work Network".
"My Work Network" has no values set anywhere.
Normal Internet access is fine in either IE or Opera (branded by T-Mobile as Web'n'Walk).
I have changed so programs that auto-connect to private network use T-Mobile Internet connection, same result as before.
I have set up a custom Internet connection for "My Work Network" using "general.t-mobile.uk" as access point, "user" as username, "pass" as password and domain left blank. I can connect to the Internet with these settings, but not via Remote Desktop.
Sometimes, normally after having re-booted the Amea and manually connected to "My Work Network" (as per settings above) I can connect, but it drops the connection while I'm still typing in username and password.
Normally I get either of these error messages when trying to connect via Remote Desktop:
"Cannot connect. Likely reasons are:
1) Specified computer name or ip does not exist.
2) A network error occurred while establishing the connection"
or
"Cannot connect with current connection settings. To change your connection settings, tap Settings".
I have cleared storage memory on the Ameo five times. I have phoned T-Mobile tech support who basically told me to sod off - apparently as long as the device can browse the Net they've done their job!
I have had T-Mobile replace the device and this morning I received a brand-spanking-new Ameo. I fired it up, let it go through the customisations, and reboot, then I tried Remote Desktop without changing anything or installing anything. And I got the same as above!!!!!
Please, guys, I'm desperate! Any help is very welcome here! I do network support for a living and I got the Ameo because I can fit a server's entire screen in and have a seperate keyboard. Except now I can't use it!
I used to have a Universal, which I sold to help finance the Ameo, so I'm truly stuck!
Oh how I wish I could unlock the damn thing and flash a better ROM to it!
Just as an update, yes, I've tried using "My ISP" as well, with the same results. And yes, everything's just peachy on the servers I need to connect to - I can connect to those servers using other devices.
And no, using Logmein is NOT an option and please don't even mention any form of VNC - you have to be seriously foolish to run VNC on a server, you might as well pay for some banner ads that say "Come hack me!"
Please don't give me advice on setting up routers, or Remote Desktop on 2000 Server, Server 2003 or Server 2008. I can do those quite well.
What I cannot do is get my damn Ameo to connect and stay connected and I'm absolutely desperate for help there!
the same
my ameo on t-mobile has done same thing, stopped working about 2 weeks ago, was working fine till then, only reason i bought the damn thing (anmd yes, i too ebayed my exec, i regretting it
so anyone out there got any ideas? i have same problem using ICS so i am guessing either a network etting on the phone, or some idiot at t has closed rdp traffic (tried chanmging a port number to 80 on a test box behind my router, still no go)
What is the operating system on the target pc first off. as i had that problem with a hack fix on vista home premium
all i had to do was to re-apply the fix.
as far as remote desktop the Ameo 8gb model ( x7500) didn't have rdp on it so i used one of the ones from this forum but under another section ( i think it was networking but do s earch to find them )
needless to say mine has never stopped working
a good test is try it from your local wireless home network if it's a home pc, and if ti works then look at the forwards on your router, make sure 3398 is still forwarding to YOUR pc and that your pc still has the same IP.
if you have a static ip and no router. always check your firewall settings.
as far as other possibles if your internet is working and all other data connections then there's no reason it SHOULDN'T work as t-mobile do not filter out 3389 port.
it has to be a problem at the target machine or network in that case.
but feel free to tell us more about the target pc and how it's connected to the internet and maybe we can find a solution
also what RDP client are you using on your Ameo
Cyberjak, the target machines vary: Server 2003 Enterprise Edition running ISA Server 2006, and Server 2008.
RRAS is installed on the non-ISA servers, while ISA of course takes over where RRAS left off. In all cases ports 3389 (TC{P & UDP) is open for inbound access, and on the ISA box it is open for in and outbound access.
Had you read what I wrote in my second post you would have seen I need no help in setting up RDP. I build, support and maintain networks for a living and trust me when I say the issue is NOT with the remote servers, but with the Ameo! I can use a collegue's O2 Touch Diamond and connect to any of the servers, but not the Ameo 16 GB.
I'm using a default T-Mobile Windows Mobile 6.1 setup as my Ameo has never been unlocked or flashed, and I'm using the stock standard Remote Desktop client that came pre-loaded and that used to work.
The issue is either with the Ameo, or with T-Mobile blocking RDP.
NanoRuler said:
Oh how I wish I could unlock the damn thing and flash a better ROM to it!
Click to expand...
Click to collapse
Why can't you do this? Is your phone owned by the company and they would frown if you modified it? AP4 includes Remote Desktop Mobile, so you might try that ROM if you do unlock.
My device is a 7510 and Olipro's unlocker doesn't work on it. I have been explicitly told that the unlocker might brick it
Hallelujah! The age of miracles is upon us!
I've put in a complaint to T-Mobile, and out of the blue Remote Desktop started working, while I also received an e-mail from T-Mobile's tech support.
Here's an extract from the e-mail:
"I have came across someone else with this problem and we are trying a temporary fix by adding a update to your account which is on now, so if you could retry the connection and let me know how you get on"
My translation of the message: We screwed up by choking RDP to save bandwidth across our network, you (and presumably others) caught us out, so now we'll pretend we're the good guys and that we've discovered something wrong and we'll fix it, but don't expect us to say sorry!
I will give T-Mobile a ring today and see, I guessed it would be t-mobile as I ave a whole range of different RDP servers I connect to and none worked!
lol, T-Mobile took all of about 2 minutes to enable my RDP again, told them I knew it was there prob as I read on XDA-Developers, got to love the internet nice one NanoRuler
NanoRuler said:
Hallelujah! The age of miracles is upon us!
I've put in a complaint to T-Mobile, and out of the blue Remote Desktop started working, while I also received an e-mail from T-Mobile's tech support.
Here's an extract from the e-mail:
"I have came across someone else with this problem and we are trying a temporary fix by adding a update to your account which is on now, so if you could retry the connection and let me know how you get on"
My translation of the message: We screwed up by choking RDP to save bandwidth across our network, you (and presumably others) caught us out, so now we'll pretend we're the good guys and that we've discovered something wrong and we'll fix it, but don't expect us to say sorry!
Click to expand...
Click to collapse
RDP Port filtering or NAT misconfigured !
bhermer said:
lol, T-Mobile took all of about 2 minutes to enable my RDP again, told them I knew it was there prob as I read on XDA-Developers, got to love the internet nice one NanoRuler
Click to expand...
Click to collapse
Just realised what T-Mobile said in their e-mail "I have came across someone else with this problem" - was that you? That WOULD be funny!
Way I look at it if we don't stick together we'll get shafted by big corporations!
Used to know a guy who had something printed on the reverse of some of his business cards. It read "Doing business with your firm is like having sex: it gives one a feeling of warm bliss.....while being screwed!"
Thanks to T-Mobile I know what that feels like! Having said that I'll also categorically state the last guy I dealt with at T-Mobile knows his stuff and was very helpful.
Curious, it does lead to believe something about the ports being like group policy's that they use as the voice over ip ports only are open for WnW Max customers usually unless you scream at them after being with them for a long time. heheh
Nano, no offence mate but i've been doing similar work for years as well but it's sometimes the simple things so you can understand me asking.
you would ask a client the same thing.
NanoRuler said:
Hallelujah! The age of miracles is upon us!
I've put in a complaint to T-Mobile, and out of the blue Remote Desktop started working, while I also received an e-mail from T-Mobile's tech support.
Here's an extract from the e-mail:
"I have came across someone else with this problem and we are trying a temporary fix by adding a update to your account which is on now, so if you could retry the connection and let me know how you get on"
My translation of the message: We screwed up by choking RDP to save bandwidth across our network, you (and presumably others) caught us out, so now we'll pretend we're the good guys and that we've discovered something wrong and we'll fix it, but don't expect us to say sorry!
Click to expand...
Click to collapse
A possible solution for those of us on T-Mobile's standard web n walk
Sorry to resurrect this thread, but I thought I'd post my experiences here in case anyone else (like me) searches for a solution to enabling RDP on T-Mobile (UK at least).
I was having the same problem with remote desktop, it saying that the server was not available. I phoned up T-Mobile's helpdesk as recommended here and after getting past first line support (who didn't know what remote desktop was, and tried sending new connection settings to my phone to resolve the issue) I got through to someone who knew what they were talking about. Turns out that I'm on T-Mobile's "basic" or "handset-only" web-n-walk package, and it's not possible to use RDP on this. I assume they block the relevant ports. They told me that I could pay an extra fiver a month to upgrade to a version of web-n-walk which can handle RDP.
Well I told them I would think about it, but instead tried to find a way around it as the one or two times I need to use RDP are certainly not worth a fiver a month. My solution is probably only suitable for the more techy of us, but without much work and with no prior experience I managed to set up a SSH tunnel using FreeSSHd as a server running on my windows server (although a normal windows box should work fine - http://www.freesshd.com/) and zaTunnel as a client on my phone (http://www.zatelnet.com/zatunnel/main.php). Both programs are free.
Basically my phone takes all RDP connections and tunnels them over SSH to my windows server, which then turns them back into RDP connections. T-Mobile have no idea I'm using RDP, and if they block the SSH port in the future I can always change FreeSSHd to run on port 80 (for web). This will also work for other protocols T-Mobile might be blocking (FTP springs to mind).
Just thought I'd post this in case anyone was in my situation of needing RDP on their standard web'n'walk.
Cool! Thanks for posting your rather excellent work-around! I will certainly be referring people back to your solution.
I think T-Mobile's out of order for not allowing RDP on all plans, without absolutely clearly stating that on some plans it isn't allowed.
You're the customer and you pay for some bandwidth. Short of illegal activities, what you use that bandwidth for is none of their business.
T-Mobile Grrrr
Many Thanks for this thread.
My Remote Desktop stopped working on my phone last month but co-incidently it was around the time I was re-intsalling my server and also flashing numerous roms to my phone so thought it maybe something with that.
But then realised I could remote desktop over my wireless at home and from other networks across the net so it wasn't anything to do with config on my side. Thought either phone or network.
Flashed a rom with remote desktop that i KNEW worked and still nothing...
Thought - this MUST be T-Mobile... glad I'm not the only one.
Have sent an email and hopefully they'll enable Remote Desktop on my line.
There is no way I'm gonna start paying an extra £5 a month for something I've been using for the last 20 months as part of my package and have removed wihtout any notice/warning.
i'll tell 'em where to shove their £5 extra a month
Has anyone been able to successfully connect DUN over BT using wmodem? I have installed the addon cab and can find the DUN connection when pairing my phone with my laptop, but when I go to connect it gives me a 678 error. I have no problems connecting wmodem over USB or using "Internet Sharing" to connect cover BT and USB.
dun
Had issue with wmodem but Internet Sharing that was on my custom rom works like a champ. I'm pulling 1.0 to 1.2 Mbps almost all the time. I can't remember if it was on my stock rom, but if not, I'm sure it's available somewhere on here.
Nate
i was just about to do a search on this. then i scrolled down the list and found this post. I'm very interested in getting BT DUN working on my Mac, since you can't use USB.
If you find an internet sharing cab, can you post here?
Thanks.
yeah i do not mean to hijack your thread but when i try to tether via bluetooth to my new macbook with internet sharing, the internet connection crawls!! i mean CRAWLS!!! lol
I have BT and USB connection with a windows laptop and it runs perfect. any ideas on how to speed up the connection?
Thanks!
http://www.wmwifirouter.com
this is really the best solution if you want to connect to a Mac. Works perfect and is worth the money! Hella fast too when connecting through WiFi. But you have the option to connect through WiFi, Bluetooth & USB.
When I connect through WiFi, I'm getting 1.2mb down and 500kb up.
It worked great for a while about a month or 2 ago when I bought it. But then I was playing with the Mac network settings and stuff and managed to jack it up. But here's what I was doing wrong:
Connecting through WiFi, there is open & wep. I chose wep. So on WiFiRouter you select your wep password. I chose a simple word, let's say "keyboard". On the Mac when you select to connect wep, using keyboard for the password won't work. You need to enter the 20 digit hex value that WiFiRouter gives you after you put in the password "keyboard".
Hope this helps anyone who might have problems setting it up. I didn't change any settings on WiFiRouter. Works right out of the box. You just have to make sure you set it up correctly on the Mac.
I use ICS over Bluetooth all the time. works great.
I now have ICS. Unlocked my HTC Touch Pro and used Scott Scrosler's ROM. But I'll most likely use WiFiRouter since it's about 3-4X faster going through WiFi. Need the speed for VPN.
I have an HTC Touch Pro and an asus eee pc and have tried and searched everywhere to figure out how to bluetooth pair these two, but I've had no luck. I can USB pair just fine with Internet Sharing. Has anyone had success with this? I'd rather go the free route than spend the $ for wmwifirouter, if possible. TIA
Well on W7 at least all I have to do is select Bluetooth as my connection option in ICS and then right click on my phone in the Bluetooth Devices window on my PC and go to where it says "Join PAN" and it connects faster than it would by USB. The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting. But GRemote works from like 25 feet away.
Internet Sharing NO Registry Edit Needed
Hi. For those with ATT FUZE Stock Rom
I got this CAB (ICS INstaller) from a website with a topic of the last free version of WMWifiRouter by chainfire, just install the CAB and it will enable Internet Sharing, and NO registry edit needed.
As far as I remembered this is needed in order to use Internet Sharing and also if you want to use WMWifiRouter by chainfire.
Enjoy.
hidavi said:
The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting.
Click to expand...
Click to collapse
I'm facing a lot of disconnects using Bluetooth PAN, however over USB works great! If I have to use the cell phone near the computer, I'd rather use the cable.
I only wanted to use bluetooth because I could put the cell phone near the window which is where I have better signal when I'm on the mountains with GPRS-only..
Hi all,
I got problem with internet connection on my HD2 (ROM 1.48). There are 2 ways I connect to the internet - WIFI and GPRS. GPRS connection works fine - I can download and read e-mails, make backups with MyPhone, update weather information, etc. But when I connect to the internet with WIFI, there are only 2 things I can do. I can browse web pages with Opera and update Twitter messages. But I can´t download e-mails, make backups, update weather information, etc. When I try to update or backup something, there is connection error (through that connection between phone and router is fine and web pages are running).
It seems to me like most of applications want to connect to internet via GPRS only. Is there any way to set up (or check) the phone to connect to the internet via WIFI when it is turned on?
Thanks for any advice
Sorry cant help but agree - it would be fantastic if there was some way of knowing / controlling when it used GPRS data and when it uses wifi. When wifi availabe obviously would rather use that than be charge a small firtune for data.
Any one out there about to help with this??
Internet browsing
Ditto. I can - after HUGE effort - connect WiFi but I cannot browse the internet using either Opera or IE. 2 year old Nokia connected and browsed literally within 2 secs! Also, the phone keeps connecting via GPRS all the time even with data connections off. Can anyone help? Thanks PS I know it's unproductive & forgive me, but I have to get this off my chest: this is the worst cellphone I've ever owned. Bluetooth doesn't work, internet doesn't work, handsfree car kit doesn't work. Does anything work?
kakphone said:
Ditto. I can - after HUGE effort - connect WiFi but I cannot browse the internet using either Opera or IE. 2 year old Nokia connected and browsed literally within 2 secs! Also, the phone keeps connecting via GPRS all the time even with data connections off. Can anyone help? Thanks PS I know it's unproductive & forgive me, but I have to get this off my chest: this is the worst cellphone I've ever owned. Bluetooth doesn't work, internet doesn't work, handsfree car kit doesn't work. Does anything work?
Click to expand...
Click to collapse
correction, YOUR Bluetooth doesn't work, YOUR internet doesn't work, YOUR handsfree car kit doesn't work.
Get it exchanged. (if they genuinely dont work)
@others, go to settings menu all settings connection connections advanced select networks.
there are two dropdowns, in teh top one should be the name of your mobile data, , this is what automatic progs will use to connect to the web, in teh bottom one it should be 'the internet' (or sometimes 'my work network'), meaning they use wifi if available, and data if not.
(At least thats how they should work....)
If you set the top one the same as teh bottom one, nothing should try to use mobile unless wifi is not connected.
Could be a proxy problem? some operators set up a proxy, which can screw with connections.
samsamuel: Thank you for your advice. I´ve tried it - in both dropdowns I got "my work network", but no success.
I´ve found something interessting. When I turn on YouTube client (using WIFI), I can´t play videos. That should be ok when I got problem with internet connection. But YouTube client shows on the welcome screen preview of today´s added videos. So the question is why should application download preview of video, but it can´t play the video? I´m a little bit confused
Thanks for the suggestion, but I had tried that already and it did not work. I don't think it is just my cellphone. There are many comments re the HD2 that make it clear that it does not work with a Parrot handsfree carkit, Motorola S9 headset etc, and the 2 earlier posts reveal problems using WiFi too. It seems to be problematic on many fronts. I cannot even connect it using Windows Mobile via an USB port! And while I appreciate all suggestions it seems to me that this model is a (very expensive) lemon and frustrates huge numbers of owners. I find it odd that a 2 year old Nokia N95 can connect and browse instantly and a 'smart phone' doesn't work at all. I find it to be very gimmicky. I don't need twitter, facebook etc. I need voice dial, good PC software (like Ovi and PC suite) and bluetooth that works etc. The HD2 has none of this, but great graphics of a windscreen wiper, exactly the sort of pointless gimmick that reveals that the designers were interested in making a toy and not a useful phone.
I suggest you try and install "HTC_Wi-Fi_onDemand_by_Krocher". This program will always use wifi when available and stop the GPRS from connecting and will also keep your wifi on a stand-by. Please do read through the thread as you have to make sure that no programs using wifi are activated when you want it to be off. For me it solved several problems with wifi.
Second thought is to upgrade to one of the much more stable and already tweaked OS's. There are quite a lot out and you'll find everything about that on this forum as well.
Last thought, if it does not work it must be something to do with either the settings or the OS version as for others it works absolutely fine. These are complicated phones that, much like computers, must be set and tweaked to the correct settings in order to get the best out of them. If you just want a "buy and run" phone this is not the one.
Success,
Itamar