Related
Can't get working internet connection via GPRS (XDA, PPC2002, WMODEM) is there anybody else with this problem? Can you help me? Under XP everything works, but need to run it on older PC or notebook with w98...
Thanks.
Using XDA as a modem under windows 98
Hello wuffi
Somebody i guess his/her name was pfqiu a moderator at sosaw forum wrote I have upgraded to the new ROM from Source O2. (ROM build v3.17.03, Radio Stack 4.21). It comes with the Wireless Modem application. I managed to let my notebook be connected to network wirelessly using XDA as a modem. I tested on Windows 98.
for more details please check this link Click here
also there's PDF file which explain in more details you can find it here
PDF File
other related link also
SourceO2
best regards and have a great weekend
Othman
It asking Active Sync 4.0 by the IR, and when you connect it to PC, PC can not find driver. in section Other devices, write: "Generic RNDIS (PROTOTYPE--Remember to change idVendor)"
in About:
Microsoft Windows Mobile Version 5.0 OS 5.1.1700 (build 14326.0.0.0)
in Device Information:
ROM version: 1.50f.00WWE
ROM date: 02/24/05
Radio version: 1.10.00
Protocol version 1337.18
I need driver for PH10B for win XP, then if somebody know how, I can share any soft on this device.
Where you got it?
Are you on Cebit?
Do you have cradle or cable?
Nice...!
I think this the same as Windows Mobile 2005...! How did you get it?
Been reading alot about WM2005 (codename "Magneto"), but also hear that Microsoft has forbidden journalist etc to post any info about it...sites were ordered to remove their content and preview pics.
Would love to know how this is working for you? Have googled for ActiveSync 4.0, but no luck, sorry.
Can you post activesync 4.0 files here?
dude where did you get 2005 mobile ??? please upload
tupisdin said:
Can you post activesync 4.0 files here?
Click to expand...
Click to collapse
If you have it, you can post it!
Or upload it to the FTP server...
Please Post
Hi all, I'm following this forum quitte some time, and i've registered myself.
Nice forum, with a lot of information.
But I'm totally surprised that you have got your hands on Windows Mobile 2005! Unbelievable, but with most unbelievable things, pretty nice!!
Can u upload it to FTP?
Would be nice!
Magneto...!!
PH10B.. This is for Himalaya Device...???, so MAGNETO on our XDA II...WOW.. Yes, it's unbeliavable...!!!
Mr. Gora, Could you give us more story about that...!!
Would be nice, Thanks.
Could you backup your ROM to SD card and share with us ?
It's really amazing.
Re: Microsoft Windows Mobile Version 5.0 I can s
Guys, please read! He needs ActiveSync version 4.0 to get it to his PC...!
Gora said:
It asking Active Sync 4.0 by the IR, and when you connect it to PC, PC can not find driver. in section Other devices, write: "Generic RNDIS (PROTOTYPE--Remember to change idVendor)"
in About:
Microsoft Windows Mobile Version 5.0 OS 5.1.1700 (build 14326.0.0.0)
in Device Information:
ROM version: 1.50f.00WWE
ROM date: 02/24/05
Radio version: 1.10.00
Protocol version 1337.18
I need driver for PH10B for win XP, then if somebody know how, I can share any soft on this device.
Click to expand...
Click to collapse
Yup...i know.. and who has ActiveSync ver. 4.00.. :?: :?:
only Microsoft at the moment...and not released yet :shock:
Allright, I fixed computer for one person, and after I finish he offer me this device as salary for my job ($200!!!! I did't know real price!!!!! ), when I connect it to the Desktop computer, I understand I don't have a driver, then I tryed to connect it trough IR port of my laptop, and it says you need active sync 4.0, so I check the microsoft, none...
Works EXELENT, except for put something on(in) it I use SD card, and can not install applications.
Are you on Cebit?
I dont know what it is.
I have USB cable(right now I just charge trough it).+SD card 64Mb
Microsoft will make availabe Active Sync 4.0 probably in July, they just post 3.8
And guys, I will share it, but I don't know this device, I don't know what files use this device (win 5.0), and how to get them,
plus I NEED DRIVER FOR PC as device.
Surely someone can help out how to get the files from this machine?
avengerpenguin said:
Surely someone can help out how to get the files from this machine?
Click to expand...
Click to collapse
I am working on it.... :wink:
Out of curiosity....
I am assuming this came on your PDA, so it must have had some disks with it ??? whats on those disks?
Can you backup your rom to SD card via the bootloader, then upload to FTP so people can try this out.. maybe there is a way to get Activesync 3.8 working with it ??
Where are you come from?
Can you connect this device with activesync 3.8?
Can you post additional pictures of nterface ... device... and etc.
Do you have an ICQ... please PM me... i will ty to help you.
Gora said:
Allright, I fixed computer for one person, and after I finish he offer me this device as salary for my job ($200!!!! I did't know real price!!!!! ), when I connect it to the Desktop computer, I understand I don't have a driver, then I tryed to connect it trough IR port of my laptop, and it says you need active sync 4.0, so I check the microsoft, none...
Works EXELENT, except for put something on(in) it I use SD card, and can not install applications.
Are you on Cebit?
I dont know what it is.
I have USB cable(right now I just charge trough it).+SD card 64Mb
Microsoft will make availabe Active Sync 4.0 probably in July, they just post 3.8
And guys, I will share it, but I don't know this device, I don't know what files use this device (win 5.0), and how to get them,
plus I NEED DRIVER FOR PC as device.
Click to expand...
Click to collapse
Gora what device is this? HP? Toshiba? Q-tek? .....?? What?
It's only got 28Mb of RAM. It sounds like a smarthone rather than a PDA.
@Gora
Can you show us more screenshots, and plz let us know what device you are using, it seams it's not a HIMALAYA, it has less Ram than we have but still let's us see the GOOOODIES :twisted:
I have done a cab installer for Bluetooth SAP Profile, for people that use it!
Thkx a lot man. going to try it...
thnaks man
bikertibi said:
I have done a cab installer for Bluetooth SAP Profile, for people that use it!
Click to expand...
Click to collapse
I have tried to download the Bluetooth_SAP_profile.CAB but i get an error message saying that i do not have not logged in yet i actually am logged in ...i can however download the other bluetooth protocols you have posted. Kindly assist.
Good job Man.
@bikertibi: I´ve seen you have the XDA Neo also. I have this mobile too, with the OS WM 5.0. Does the program works with this OS?
Limbacher said:
@bikertibi: I´ve seen you have the XDA Neo also. I have this mobile too, with the OS WM 5.0. Does the program works with this OS?
Click to expand...
Click to collapse
I don't tested on WM 5.0 but I think it work.
Hi,
it works! Great,thank you for your help!
regards
Jürgen
Hi,
I will use ith with my Xperia X1 Sonyerricsson, but it doen't work.
Have you any idears? I must use it in my mercedes.
thanks.
hi
i have a scirocco and the radio ( RNS510 ) have the rSAP blutooh protocol .
do you know if this upgrade will make my htc p3600 work with the radio ???
thank you very mutch .
angelo from portugal .
babaroots said:
i have a scirocco and the radio ( RNS510 ) have the rSAP blutooh protocol .
do you know if this upgrade will make my htc p3600 work with the radio ???
thank you very mutch .
angelo from portugal .
Click to expand...
Click to collapse
I don't know angelo, but you can try and told as about your experience..
hi
hello .
VW in the manual says that only Nokias and 3 siemes work in that radio .
Well for all the people out ther that have a scirocco and dont want to change cell phone ...
HtC remote acess card works fine with the radio .
Thank you .
angelo canelas
Hi!
I needed this for my Omnia to work with VW Premium handsfree bluetooth kit. I have boiled Omnia with Manila ROM. WORKS PERFECTLY!!! After long last i got it! Many thxxxx!!!!!
Next thing: is it possible to modify it to work on Samsung SGH-U600, which is PC connectable via Samsung PC Studio? My wife'd like to connect as well...
Take care!
J.
Hello,
how can I install this tool on my blackberry? I cannot install a .zip file.
Hope that somebody can help.
Zweez
bikertibi said:
I don't know angelo, but you can try and told as about your experience..
Click to expand...
Click to collapse
Hi,
I too got a scirocco and I have just tried the .CAB and
it worked!!!!
but one small problem is that u can upload the phone book
i got an X1 and got a cooked ROM from this site (cant remember whose though but it was one with 3 options of cooked rooms ) and before the .cab it was not working and no it is...
if anybody can help regarding importing the phone book, i really appreate the help...
long live xda
Disable popup menus?
Ìs there a way to disable all that upcoming popups while connecting and disconneting through bluetooth?
OldFellow said:
Ìs there a way to disable all that upcoming popups while connecting and disconneting through bluetooth?
Click to expand...
Click to collapse
I don't know any easy way to disable this popups! Can be a solution to make a windows service for checking this popups and close it, but is a programming hard work, and of course you can loose some ram and speed from your device.
Guys,
I have used a Himalaya for 3 years and a Prophet for 2 years and I have been from wm2003 till the latest wm6.1 version with touchflo 2d, but I gave my prophet to my son and now I am using a qtek8500 (aka startrek). I have 2 questions:
1) What is the difference between the standard and the pro version on this device?
2) I flashed Erofich's pro V2 version (congratulations!) which looks very nice, but I can't synchronize with my Vista laptop. Can anyone give me advice and please don't tell me to switch to a XP pc as I don't have a XP PC.
Thank you very much for your help!
Difference
The Standard ROM is optimized for smartphone controls, whereas the Professional ROM is made for touchscreen devices. If you use the Professional version on this phone, you have to use a dummy cursor with the D-pad.
eddyve said:
Guys,
2) I flashed Erofich's pro V2 version (congratulations!) which looks very nice, but I can't synchronize with my Vista laptop. Can anyone give me advice and please don't tell me to switch to a XP pc as I don't have a XP PC.
Thank you very much for your help!
Click to expand...
Click to collapse
Hi freind
you can see this guid .
Thank you for this answer. I know this trick for a long time, although it doesn't work. Did you try it yourself? For example if your device is not connected, you will not see a mobile device in the device manager!
thx anyway
eddyve said:
Thank you for this answer. I know this trick for a long time, although it doesn't work. Did you try it yourself? For example if your device is not connected, you will not see a mobile device in the device manager!
thx anyway
Click to expand...
Click to collapse
No , I use from XP
but a question : do you use from this application ?
& finally , maybe this post can help to you .
Hi,
My Tablet:
Android Tab 10 Mercury
Android Version: V2.3 2011-11-11 (001112)
Kernel: 2.6.32.9
[email protected] #206
Build number: FRF85B
When I try to open Mobile Networks so that I can setup for the USB Modem
I get the following error: The Application Settings (Process Com>android.settings) has stopped unexpectedly.
Can anyone steer me in the right direction to fixing this problem.
Thank you
Regards Granny1
Are you rooted?
Please hit the thank you button if i helped!
Hi,
Sorry, yes I am, I used Z4ROOT.
Except for not being able to use a usb cable to connect to my Pc everything else is working.
Wireless, wireless/usb mouse, USB stick/Keyboard, Fixed Wireless Ethernet Internet.
I just can't get around this error.
Regards Granny1
You will need a special one or software. To my knowledge, android does not have that ability built in.
Such as this one is compatibly with some, but not all
http://www.euogo.com/huawei-ec122-3...vdo-support-various-android-tablets_p435.html
Hope this helped.
Please hit the thank you button if i helped!
Hi,
Thank you for that but, I have already brought a HUAWEI E1750 as that is supposed to work, but it has windows software on it and I don't know how to remove it or where to get android drivers? from.
I have sent a Fax to the support people at Huawei but as of yet I have had no reply.
Regards Granny1
Sorry, cant help you there..... hope your problem gets fixed! Tell me what they say. Id be interested.
Thank you, will do
Regards Granny1
Hi,
Anyone else have any idea on how to fix this problem
Regards Granny1