I tried to upgrade my QTek from 1.66 to i-mate 1.72
Then it turned off and it won't turn on again
Can anyone tell how to make it work again?
Please help
You will have to give more details I'm afraid.
ie
Were there any messages on the PC during upgrade?
Was the AC power plugged into the cradle during the upgrade?
Is the display on the XDA2 completely blank? If not, does it say Serial or USB at the top and a version number at the bottom?If so, have you attempted to boot into "Bootloader mode"? (hold down D pad in it's central position and then hard reset)
Have you tried attempted to repeat the process on another PC?
Let us know the answers to these queries, and then perhaps we can help more.
Cheers
Ant
buy another Qtek2020 coz yours gone dead forever ..... "Game Over"
maybe yours confused of repeating upgrade and shut itself off
hardluck :wink:
Goto "bootloader mode" & try to upgrade again.
I don't understand , when there's a failure during upgrade ( happened to me many times ) , u go to the Bootloader with the " Serial " and " V1.* ", and restart upgrade :shock: :!: :!: :!:
I usually don't mind newbies asking questions but this particulat question has been addressed at least 50 times and a simple search for "dead 2020" would have resulted in a fix for your problem.
To fix your problem do a search on how to put your PDA in the boot loader mode and then try to restart your update while in the bootloader mode.
To put your 2020 in the bootloader mode just hold down the round joystick button while holding down the power and the reset button on the side.
Good luck
When your turn it on do you see this:
SERIAL
Vx.xx
(x.xx = version number ist variable)
(if you see this you are in boot mode)
PLEASE:
if thats so PLEASE search forum first the solution is out there!!!
there are about 1001 topics about it, so you will find a solution!!!
(To get it in boot mode press ON/OFF button, Softreset and The big round button at the same time if you the boot mode goto PLEASE: 8) )
good luck!!
I tried to upgrade my XDAII to WM2003se but i got this error 120 saying "Country ID error".
I get at the top now "Serial"
and at the bottom "v1.06"
Can somebody tell me what a "hard reset" and a "soft reset"
Edit: After hours of forum searching and reading, I finally was able to flash the software to WM2003se thanx to this thread:
http://forum.xda-developers.com/vie...postorder=asc&highlight=imate+wm+2003se+error
Thanx for all you help anyhow.
mate
hard reset is done by pressing the power button and using your stylus to depress the reset switch under the unit. this totally erases everything in the memory; all apps or progs installed are wiped out (including contacts, calendar, tasks, etc).
soft reset is like restarting your computer. all data and applications are retained; this is actually good for the unit since it clears up memory. simply done by using the stylus to depress the reset switch underneath....or by a third party program.
if your unit is stuck in bootloader (showing you the serial details and such) try doing a soft reset first. if that doesn't work then a hard reset should do the trick.
for the correct se rom to use...not sure where to get it but maybe the other chaps can help out.
cheers
Thanx for your reply.
I tried both a soft and hard reset but nothing happens. The text fades for about a second and pops right back up.
My PDA still won't boot. Still has the screen win"serial" and "v1.06" and when i plug it into the cradle, it says "USB".
Help still needed
Launch ROM
Set your Xda II into BootLoader mode = Power + Reset + DPad
Cradle the Xda II and run this ROM
Thanx for your help guys.
Dr.Stein, I ran the rom you gave me but got a Model error 100.
hmm.... does it change anything if my PDA is actually an Imate Pocket Pc with the O2 XDAII firmware loaded onto it?
Help still needed
iMate
kreat1ve said:
Thanx for your help guys.
Dr.Stein, I ran the rom you gave me but got a Model error 100.
hmm.... does it change anything if my PDA is actually an Imate Pocket Pc with the O2 XDAII firmware loaded onto it?
Help still needed
Click to expand...
Click to collapse
I thought you said it was an Xda II?
In the case of an iMate you have got to make some changes to the ROM before running it.
Do a search in the forum to find out how.
Will this method work?
http://wiki.xda-developers.com/wiki/ER2003Edit
This is so frustrating. :x
Im going through this thread: http://forum.xda-developers.com/viewtopic.php?t=7392&highlight=imate+model+error+100+rom
But have no idea what they are saying.
NK.nbf - 0x20040304
ms_.nbf -0x20040305
radio_.nbf - 0x20040306
Click to expand...
Click to collapse
- what does all this mean?
http://wiki.xda-developers.com/wiki/ER2003Edit - this link tells me nothing of how to use the rom editor. Am i meant to extract, delete, rename a ROM file or what?
I'm trying to download other ROMs BUT ALL THE LINKS ARE DEAD.
My screen is still stuck in bootloader mode (Serial V1.06).
Still in need of help.
[/url]
Important!!!!
If your stuck in bootloader mode and have no knowledge (yet) of how to fix it.,
Take your battery out your pda untill you've worked out how to use ER2003Edit.
You see in bootloader mode your pda does'nt charge, so the chances are now That your batterie may allreay be too low for an os upgrade.,
Quote:
NK.nbf - 0x20040304
ms_.nbf -0x20040305
radio_.nbf - 0x20040306
- what does all this mean?
Open the rom editor, go to tab and select open then navigate to
NK.nbf - 0x20040304
ms_.nbf -0x20040305
radio_.nbf - 0x20040306
Open each 1 with editor then where it says o2,qtek,t-mobile edit this window to your operator. Then start himilayaupgradeexe on pc
. If you have a cradle allso charge the batteri up before upgrading.
when i turn on my Qtek 1010 it comes up with align screen. i cant find out where to get rid of it. any help would be great
cheers
If you do the screen alignment correctly & accurately, it won't show up again..
Also check for programs in startup.
i cant even get in to the main menu. as soon as i turn it on it comes up
fknfst said:
when i turn on my Qtek 1010 it comes up with align screen. i cant find out where to get rid of it. any help would be great
Click to expand...
Click to collapse
Just run this tool.....
Stefan
Which tool ????
Hi masters
I have a qtek ph10b.
its lock on telefonica/movil.
i want to unlock this unit but when i want to conect it with pc using active sync its demand user password.for this i made hardreset(power and press reset button placed in a whole togater) its sterted again and after total calibration its demand user password again.
i am confused please help me.
its rom is 1.14.00
waiting for good response.
thanks in advance.
I have installed SCHIST WM6.5 21864 in my ASUS P527. I have set the simple 4 digit password. it was working fine. but, when i put the correct password also it is showing as "incorrect password" OR sometime no message will display.
I tried hard reset by pressing "RESET" button & scroll button But the same lock screen will appear again
Please help me to hard reset my phone
Thanks in advance