Hi,
Any body can help me to fix my Qtek 1010 :?:
By mistake I pressed Screen Alignment Icon and tried to close this window. When I got it closed I found that I've misaligned the PDA screen , and now I can neither enter pin number for my mobile phone or open start for any application or function.
Thanx in advance
hard reset will allow you to re-align the screen, you should be able to backup most of your important information through activesync.
HTH
Have I fried my XDA 2?
I've had this thing 1 hour and I was running the latest rom upgrade from O2. While it was checking the rom in my XDA2 it came back saying "Error 120: Country ID Error". Now the thing is stuck in a serial bootloader 1.03 mode and grey screen.
I'd not made ANY changes to config of the XDA before trying to upgrade it.
Any ideas?
Don't lose hope mate! I had a very similar problem, with the same result, only my screen said "Serial v1.01" Black text on grey background, no backlight. When I placed it into the USB Cradle it changed to "USB v1.01". It would do this even after I took the battery out for 20 minutes, the moment I relaced the battery, without even pressing the power button. I believe this is correct operation for the XDA II when it's "between ROMs" so to speak, perhaps someone in authority will confirm this?
Anyway, after rebooting the XDA II and the PC, and re running the upgrade sequence about 10 times it worked, and I now have a perfectly functional XDA II. Made me sweat, and swear, for a few hours though, I can tell you.
Keep trying and good luck. Sorry I can't help more!
Andy
I have the same problem... still not working eventhough tried many many times..
It wont even go to bootloader mode.. (pressing power, navigation and reset button)
I come up with serial on top but when i plug-in to a usb cradle it turns to USB and v.1 06 at bottom..
I also tried with different roms.. (QTEK and MDAII) upgrade utility but it only comes up with a window "checking the information on your pocket pc.. .please wait" then the xdaII screen went blank (like no power) and the utility does nothing else..
can someone help? or have i lost the xda II totally?
Hi,
Same problem for me!
Please let me know how it can be solved.
:evil:
I am in the same deep **** ma self! please any1 who knows please help us!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Sent back to the place where you buy your XDA... :? that's the only way...
Sent back to the place where you buy your XDA... that's the only way...
Click to expand...
Click to collapse
ITS NOT THE ONLY WAY.. because what we did is actually out of warranty.. we are trying to be different with others.. besides if you can't put a good answer you better not reply at all.
alimx said:
Sent back to the place where you buy your XDA... that's the only way...
Click to expand...
Click to collapse
besides if you can't put a good answer you better not reply at all.
Click to expand...
Click to collapse
alimx, You could be more polite replying to him, he was giving you a suggestion, why you become RUDE!!
well, If i have an answer or a solution to your problem then I prefer NOT to give it to you, jerk!!
:evil: :evil: :evil:
alimx,
when it says "Serial" and "v1.06" then changes to "USB" when you place in the cradle, IT IS in bootloader mode.
I had this same problem with a recent i-mate I bought for my boss. It won't let you downgrade or switch to any other ROM besides the 1.66 i-mate ROM.
1. Open Activsync without the unit in the cradle.
2. Go to Activsync and uncheck the box where it says "Allow USB Connection with this Computer" (seems strange I know but it works)
3. Put the i-mate in the cradle. It should say "USB" and "v1.06" at the bottom.
4. Download and run the i-mate ROM version 1.66 from clubimate website.
5. Allow it a few minutes and it should finally come up with the screen about converting blah blah to blah blah ROM.
For some reasons, the new i-mates coming out that have the 1.66 ROM will not allow a downgrade to ANY OTHER ROM. Which I think is BS.
For the guy having trouble with 1.10 Radio version. My suggestion is to re-run the 1.66 ROM (I think it's your only option at this point until a new ROM is issued from i-mate). It may fix things. My 1.10 radio version seemed better the second time I loaded the ROM (I know it shouldn't make a difference but it seemed to).[/list]
Hi
When i tried the upgrade program version 1.0 from orange 166 DK my XDAII started at least to show error codes when upgrading.
Before it only become black
My unit was á new QTEK 2020 with french system 1.66, boatloder 1.06 maybe newer units needs the latest himalya upgrade software.
I will keep trying
Dear all.
I had the very same problem couple nights ago. All I did was soft and hard reset, all of which didn't help. But just before I lost my hope, I re-cradled my XDA II, at that time my xda's screen was still black and displayed "Serial", then I chose different upgrade version and installed it from my PC and everything turned out fine.
HTH Cheers,
I am having the same trouble
I am trying all these suggestions, but with no luck so far! (my screen displays v1:01 When I try and install anything on it, my pc can't detect the device
Any more advice?
HI
I found this
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm
I downloaded the xdaII launch rom, and it is working!! My screen tells me it is upgrading!!
Hope this helps!
Have fun
pw
my appology
My appologise goes to nakamichi... and alexlloyd54... sorry, i didn't mean rude.
to all you kind people out there a warm hello.i need help regarding my xda. it seems that my rom wont load properly. first i tried a hard reset but no effect. then i i tried using the sd card bootloader method but it doesnt work either. i end up with just a white screen with the blue strip on top and the small keyboard at the lower right portion of the screen. does anyone know whats wrong with my xda and how to correct it. all suggestions would be really appreciated.thanks!
Are you sure your device is in right condition.
What happens when you try to enter the bootloader?
On the bootscreen you're getting some device information Which ROm, which radio stack ,...
Looks like:
R 4.01.12
.....
What are you getting here?
Stefan
LumpiStefan said:
Are you sure your device is in right condition.
what do you mean by "in the right condition"?
What happens when you try to enter the bootloader?
i see the tricolor screen(wallaby bootloader v5.17) that says wait then gsm error appears.
On the bootscreen you're getting some device information Which ROm, which radio stack ,...
Looks like:
R 4.01.12
.....
What are you getting here?
when i soft reset i get the o2 splash screen that has 3.20.06 at the bottom right screen then the letters G and R appear on top of that but no #s beside them.thats why i think the radio stack and rom got wiped out or wouldnt load.when i try to activesync my pc says that the xda malfunctioned and cant be recognized.what's happening to my device? its quite frustrating.i wish you could help me out to fix it.
Click to expand...
Click to collapse
Take a look at this procedure.
Maybe it helps you.....
http://lumpistefan.dyndns.org/tools/gsmerror_repair.htm
Stefan
hello,
i have a qtek s200, spl 2.20.0001.
i've been trying to hardspl/upgrading to wm6 for a couple of days now.
have tried every possible way i could find on this forum (and others).
tried the kaiser v1, jumpspl, update package, prophet tools, ...
nothing works for me.
i always get the white screen the second i press continue on my device or when i click ok on my pc.
i can hear the device rebooting, because my usb connection gets reactived when i wait, watching the white screen.
after a while i even get my activesync connection back. but always in white screen. when i softreset the s200 i still have the spl 2.20.0001.
i even tried upgrading it to another rom in the white screen and then i get stuck in the bootloader, which means i have to re-install an official qtek-rom.
help me!!! what should i do to be able to use wm6 on my device??
thanks a lot in advance. appreciate it it! a lot!
greetz
never mind ...
followed the instructions on the G4forum and it works (for) now.
sorry. thx for those who read my question anyway.
greetz
Hi,
I have used (installed) the Wizard love on my Qtek 9100 (O2 xda Mini s)
But now, when it starts up, it shows the wizard love splash screen, or image.
Is there a way to change it?
I would like to put back the O2 image. (i already found a O2 nfh file, but no tool to update it on my device)
can someone help ?
thanks.
stefke1974 said:
Hi,
I have used (installed) the Wizard love on my Qtek 9100 (O2 xda Mini s)
But now, when it starts up, it shows the wizard love splash screen, or image.
Is there a way to change it?
I would like to put back the O2 image. (i already found a O2 nfh file, but no tool to update it on my device)
can someone help ?
thanks.
Click to expand...
Click to collapse
here it is.....
download a new ROM (does not matter which one you pick) and then....
copy/paste O2 nfh file in the folder with the RUU.
... ok now "flash" and the screen should be there
Got it? if not, send pm
good luck°!!!!
i tryed that, but, still, it stays WizardLove
stefke1974 said:
i tryed that, but, still, it stays WizardLove
Click to expand...
Click to collapse
is your wizard HARDSPL? or softspl?
seems a little weird.....
LOL
anyway good luck!
i use hardspl
Try this one.
Thanks a lot IT WORKED
only, your update tool didn't work.
I just copy the file nk.nbf to my update tool, and now it is done, i have O2 splashscreen again.
Thanks a lot for your help.
By the way, is there a update tool working with Windows 7 ?