Very increasing speed,i'm very happy, but i don't know how disconnect .in this time i use to turn off the phone. there is any other possibility?
thanks a lot
enricopd :roll:
You can use BVRP GPRS Manager 2.0 software.
Download then run setup.exe to install.
Register with your own Name
Serial is: 20021C-1021-0134
(Running on 2002 & 2003).
Good Luck :lol: :lol: :lol:
enricopd said:
Very increasing speed,i'm very happy, but i don't know how disconnect .in this time i use to turn off the phone. there is any other possibility?
thanks a lot
enricopd :roll:
Click to expand...
Click to collapse
If you hold the red hardware "end call" button down for 3-5 seconds, it will disconnect GPRS. If you are NOT already connected to GPRS, this will instead switch off the phone.
It's the only way I ever disconnect from GPRS anymore, even though I have (and love) SPB GPRS Monitor.
Related
I have to hard rest the phone every 5 days as it hang up. Hang up always starts with ring tone become silent and then no response on the screen.
I have 2G memory and have the following programmes installed:
SPB Weather, SPB Time and SyncClient for synchronization with Novell GroupWise.
Can anyone advise?
I have to say, I have'nt had to reset my atom in a long, long time.
Try uninstalling those programs and see if it makes any difference.
tom dunne said:
I have to say, I have'nt had to reset my atom in a long, long time.
Try uninstalling those programs and see if it makes any difference.
Click to expand...
Click to collapse
Thanks Tom, I also have 2G memory card will it make any difference?
It shouldn't - I am running apps from mine at the moment without problem.
Thanks a lot, it has been stable for more than a week after removing some of the programmes. But now every few days the speaker turn itself to silent and I can't get any ring tone. I soft rest and go back to normal. I ahve to do this every few days.
Did you have same prob, and how can I fix it.
reflash the rom!
Do you mean hard rest? if different how can I reflash?
Ah Ah Ah...
It not only a simple hard-restart your device, but upgrade your ROM to the latest, then try to find if it is better.
I already have the latest, should I connect to PC and reload the new upgrade again?
definately, use the bootloader mode....ie. camera+softreset button together then plugin USB to PC and run DSUU
Hi please someone tell me what am i doing wrong trying to hard reset the phone ...
When i press power on key and reset button .. the phone tells me press green key and red ley together ,,
After i do that .. A screen comes and tells me :
device clean boot
reset the phone.??
After that it just gets stuck there ,, there is no sign of pressing yes ..i tried to press all the keys and ntg works ,,
can someone please guide me ..
Thanks
Mike
Thank you Homer, should I remove memory card or keep it in place.
I have tried nearly all ROMS released on this forum (eg. PDAMobiz, Gallum, PDAViet 4.0.0.6). On all ROMS I have tried, I have the same problem.
Although I turn off the device pressing the power button on the right side, time to time it turns on automatically without me pushing any button. (every 3-5 minutes)I believe that the cause is I use Direct Push all the time and when it starts to sync the phone turns on unintentionally.
Second, The "Lock all buttons expect Power button" option is selected in the Buttons settings. However when I first turn the device off, no button is functional as expected. But after 1-2 minutes when I click Comm Manager(or now TouchFlo) button, the device turns on again.
This is very annoying because I put the phone in my pocket and it turns on and I start calling people or sending messages without me knowing that
any help appreciated.
Thanks!
Onur
ogorur said:
I have tried nearly all ROMS released on this forum (eg. PDAMobiz, Gallum, PDAViet 4.0.0.6). On all ROMS I have tried, I have the same problem.
Although I turn off the device pressing the power button on the right side, time to time it turns on automatically without me pushing any button. (every 3-5 minutes)I believe that the cause is I use Direct Push all the time and when it starts to sync the phone turns on unintentionally.
Second, The "Lock all buttons expect Power button" option is selected in the Buttons settings. However when I first turn the device off, no button is functional as expected. But after 1-2 minutes when I click Comm Manager(or now TouchFlo) button, the device turns on again.
This is very annoying because I put the phone in my pocket and it turns on and I start calling people or sending messages without me knowing that
any help appreciated.
Thanks!
Onur
Click to expand...
Click to collapse
I'm not shure if it helps but my last version of the touch version does not use the Comm Manager button for the Touch Cube... and I tryed to simulate but pressing power of and then tried to press comm manager button several times and it did not turn on
ogorur said:
I have tried nearly all ROMS released on this forum (eg. PDAMobiz, Gallum, PDAViet 4.0.0.6). On all ROMS I have tried, I have the same problem.
Although I turn off the device pressing the power button on the right side, time to time it turns on automatically without me pushing any button. (every 3-5 minutes)I believe that the cause is I use Direct Push all the time and when it starts to sync the phone turns on unintentionally.
Second, The "Lock all buttons expect Power button" option is selected in the Buttons settings. However when I first turn the device off, no button is functional as expected. But after 1-2 minutes when I click Comm Manager(or now TouchFlo) button, the device turns on again.
This is very annoying because I put the phone in my pocket and it turns on and I start calling people or sending messages without me knowing that
any help appreciated.
Thanks!
Onur
Click to expand...
Click to collapse
Just a hunge and only partial answer, but have you made an email account and have the setting configured to check at intervals? My experience is that the device turns to active then. I have put this setting to manually and no problems witk unexpected "turnning on" since then.
(Doesn't explain the Comm button issue though...)
The problem persists both for Gullum and also for PDAViet 4.0.0.6. I have e-mail account set to receive mail "as they arrive"(I use direct push) so that should be the problem. Everytime it starts to sync the device turns on. I cannot change this setting to manual because I use e-mail more than phone on my PDA (I have 150-200MB data usage per month )
I cannot find a reasonable answer to the comm manager problem because for the first 2-3 months everything works as it should be both later comm manager button wakes the phone up.
Thanks anyway. I think I should carry on using good old WM5.
ogorur said:
I have tried nearly all ROMS released on this forum (eg. PDAMobiz, Gallum, PDAViet 4.0.0.6). On all ROMS I have tried, I have the same problem.
Although I turn off the device pressing the power button on the right side, time to time it turns on automatically without me pushing any button. (every 3-5 minutes)I believe that the cause is I use Direct Push all the time and when it starts to sync the phone turns on unintentionally.
Second, The "Lock all buttons expect Power button" option is selected in the Buttons settings. However when I first turn the device off, no button is functional as expected. But after 1-2 minutes when I click Comm Manager(or now TouchFlo) button, the device turns on again.
This is very annoying because I put the phone in my pocket and it turns on and I start calling people or sending messages without me knowing that
any help appreciated.
Thanks!
Onur
Click to expand...
Click to collapse
i had the same Problem,
i noticed that the problem is only if i turn on identification information in "Settings/Owner Information/Options"
so i turned off and never had this problem
I am using PV 4.0.0.0.6 and got the same problems. auto on every few minutes. I try to set the Active Sync (Servermode) to manual, disable GPRS and it is same. no idea at all. If somebody can help that I appreciate very much.
Yesterday I paired my Qtek 8500 with Sony Ericsson K610i. I just did ordinary pairing, nothing else. I did not install any apps or so. Just clean pairing you all know. Few minutes later I wanted to write an email, so I went to the SMS box and wanted to press number 2 to open Outlook Email in Qtek. However I noticed that all numbers changed into the letters which you can see in this picture:
Well that wont be too big deal, only if it was just SMS. After comming home, I noticed the same everywhere in my cellphone. For example, in ActiveSync I pressed the right button and then 6 and it started ActiveSync synch via BlueTooth. Now I cannot use the shortcuts, I have to press up or down button. That pretty sucks.
Like I said, I did NOT install anything. I just paired the cellphones. Only paired, I didn't even discover available services for them. Just paired. So I think it's not worth of master reset.
And YES, I tried to remove pairing with Sony Ericsson. But no change...
I hope somebody can help.. Thanks in advance!
Well, this switch from nubers to alphabet letters happens to me every time I connect my BT keyboard using the HID profile. As I remember it stucked once on the phone even after disconnecting and restart of the phone. I have managed somehow turn back to normal. I think it was some registry value. Im gonna try to look fot that.
EDIT:
Here are my tips:
1) Try to pair the devices and disconnect/unpair the devices correctly - hope it will switch back to normal
2) or simply change the HasKeyBoard DWORD to 0 in registry HKEY_CURRENT_USER\SOFTWARE\Microsoft\Shell and restart
moneytoo said:
2) or simply change the HasKeyBoard DWORD to 0 in registry HKEY_CURRENT_USER\SOFTWARE\Microsoft\Shell and restart
Click to expand...
Click to collapse
Thanks a lot, it works. I can't unpair my device because I need to test from time to time some accessories in my work on both phones (working for Sony Ericsson)
Dikes chlape, tohle pomohlo. Uz jsem se zacal bat ze to zavani hard resetem
I've got this issue that's driving me mad.
I use the WiFi option heavily at home and since upgrading to WM6 I seem to find that WiFi dismissal is not being retained.
Every time I switch on wireless the next doors router pops up as a new network detected. Each time I tell it to "don't show this message again" but it takes no notice.
I thought it might be the ROM but I have tried a few with the same result.
If anyone knows a way to get it to retain the dismissal or know a way to set the default profile it would be most appreciated.
At the moment I'm using PDAVIET transformer 1.1.
Thanks in advance.
TB.
After it tells you that it detected next door's router, press the power button twice quickly.
jincongz said:
After it tells you that it detected next door's router, press the power button twice quickly.
Click to expand...
Click to collapse
I have just tried that and it does nothing.
Even if I dismiss the detected Wifi network is still comes back. Press power twice quickly it then re-appears.
Any other suggestions.
the same problem... wifi don't establish wireless connection
Hi, i have the same problem, i wish to know if there's any way to debug what's happening... i tried without mac filtering, open/open, and open/wep... but i cant connect to my home router thru my kaiser (tytn ii).
After trying a few WM6 all with these kinds of issues I went back to official WM5
Here's A Fix
From Chetstriker:
http://forum.xda-developers.com/showthread.php?p=2950391#post2950391
Hello, as the title implies I cannot get here drive to "talk" to me. The navigation is correct, a blue line is displayed and a flag at the end, but it doesn't talk.
I have tried various things, like reset phone and do a clean install, remove here drive+ and reinstall it, remove maps and redownload them, turn off bluetooth connections, wifi, cellular, restart the phone, remove all navigational voices from the here drive menu and redownload them, but I can't get it to talk. The speed limit warning is working but the navigational voice and the announcing of street names don't work.
Please help, as I cannot use it when I drive alone, I have to take my eyes off the street regularly.
voice must be downloaded and selected in options...
all working fine for me. i have only once problem with voice navigation... during driving voice stopped to work and after restart device (turned off and on) started to work again...
Thanks, voice is downloaded and selected in the options, actually I downloaded US, UK and Greek recorded voices and selected them one by one with no positive result.
Also connection is turned on, battery saver turned off, location turned on, map options are all set to default and map of Greece is downloaded for off-line use. Before 4 months I was hearing the navigational voice but now no.
The only thing I can further think of, is that I live in Greece and I got the phone new from a UK online shop, could this interfere with Here Drive+ ?
panast said:
The only thing I can further think of, is that I live in Greece and I got the phone new from a UK online shop, could this interfere with Here Drive+ ?
Click to expand...
Click to collapse
no... this not problem (Lumia 920 have global licence for navigation)... i downloaded Greece voice and tried on my Lumia 920 and working (is very sexy female voice )...
did you try hard reset? backup any important data from phone, charge it 100%, connect phone via USB, and make reset phone from "settings - about" (and pray )
dxdy said:
no... this not problem (Lumia 920 have global licence for navigation)... i downloaded Greece voice and tried on my Lumia 920 and working (is very sexy female voice )...
did you try hard reset? backup any important data from phone, charge it 100%, connect phone via USB, and make reset phone from "settings - about" (and pray )
Click to expand...
Click to collapse
Gonna try a silly question, you do have the volume turned up? I know it's silly but it wouldn't be the first time.
dawso_s said:
Gonna try a silly question, you do have the volume turned up? I know it's silly but it wouldn't be the first time.
Click to expand...
Click to collapse
hehehe i dont have problem