I have to hard rest the phone every 5 days as it hang up. Hang up always starts with ring tone become silent and then no response on the screen.
I have 2G memory and have the following programmes installed:
SPB Weather, SPB Time and SyncClient for synchronization with Novell GroupWise.
Can anyone advise?
I have to say, I have'nt had to reset my atom in a long, long time.
Try uninstalling those programs and see if it makes any difference.
tom dunne said:
I have to say, I have'nt had to reset my atom in a long, long time.
Try uninstalling those programs and see if it makes any difference.
Click to expand...
Click to collapse
Thanks Tom, I also have 2G memory card will it make any difference?
It shouldn't - I am running apps from mine at the moment without problem.
Thanks a lot, it has been stable for more than a week after removing some of the programmes. But now every few days the speaker turn itself to silent and I can't get any ring tone. I soft rest and go back to normal. I ahve to do this every few days.
Did you have same prob, and how can I fix it.
reflash the rom!
Do you mean hard rest? if different how can I reflash?
Ah Ah Ah...
It not only a simple hard-restart your device, but upgrade your ROM to the latest, then try to find if it is better.
I already have the latest, should I connect to PC and reload the new upgrade again?
definately, use the bootloader mode....ie. camera+softreset button together then plugin USB to PC and run DSUU
Hi please someone tell me what am i doing wrong trying to hard reset the phone ...
When i press power on key and reset button .. the phone tells me press green key and red ley together ,,
After i do that .. A screen comes and tells me :
device clean boot
reset the phone.??
After that it just gets stuck there ,, there is no sign of pressing yes ..i tried to press all the keys and ntg works ,,
can someone please guide me ..
Thanks
Mike
Thank you Homer, should I remove memory card or keep it in place.
Related
it is fully charged (led is green when it is in cradle) but when I press power buton nothing happens. What is the problem? Please help. I am new to it, so hope for help of good friends here.
try doing a softreset
Rudegar said:
try doing a softreset
Click to expand...
Click to collapse
you mean pishing once? and then? try to press power on button?
you mean pishing once
Click to expand...
Click to collapse
if you by this mean that you press the tip of your stylus into the hole in the left part of button of the xda once then yes
then try to turn it on using the turn on / off button
I tried, but it did not turn on, when I put it to cradle led is green, but when I get it out of cradle I do not see any light on led. I tried to power it on pushing that button, but nothing happens
is anybody able to help me?
If it neither works in the cradle or on battery power then I would suspect a component on the charging circuit has died or your battery is kaput, by doing a reset it should switch on automatically.
but holding power button and doing soft reset I could get to wallaby bootloader, so battery does work. any other suggestions?
If holding power and rest works then the power button is functional, have you attempted to flash the xda before this happened? What happens if you push the green telephone button bottom left of your xda? Have you tried a hard reset, using the unscrewed top half of stylus to push once in the tiny hole bottom right of xda, leave for 1 minute then push once more. You will lose all data but your data isnt much good if you cant switch on.
yes, I tried to hard reset it several times, but had no result. now I am trying to wait for several minutes during hard reset. when I press green button - nothing happens. I did not try to flash my XDA before those problems appeared. no it did not turn on even after 5 minutes... :-( please help!!!!
I had installed KSE TrueFax 2 and this power issue happened to me. Could not switch it on at the XDA at all, and had to so a soft-reset to get it to switch on. After I uninstalled the fax sowftware, everything worked okay again.
so you can power phone on pressing button and dping soft reset. yes? what do you see? wallaby bootloader? what to do next to run operational system? I just see 4 color stripes and below GSM OK, that is all, what should I press?
dmjass, it seems to me that you have lost or corrupted your rom, if you havent been flashing the xda its beyond me why this should happen. I would download a new rom, not radio stack, just the rom and use the sd card method of flashing, this should restore your system if the hardware is all ok, you have a working bootloader and an intact gsm stack so give it a try as you have nothing to lose by doing this.
I think trying to do the SD-card ROM update is your best bet as well.
If it turns out that you cannot get your unit running again, I would be interested in purchasing it for testing purposes and replacement parts.
Good luck!
-Robert
thank you friends for your advices, but please let me know how to perform flashing rom by sd card. I will appreciate all your help, please describe that process in details. ok? thank you.
PDA bad ROM?
I am experiencing the same problem after having dropped it off my belt clip. Now the unit just says "Welcome to T---Mobile, G324e4 // R6.25.02 // 4.01.16 and none of the buttons work except for the boot stylus ones. Can anyone help?
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
hi
had same problem D/pad on/off button and reset release reset first and it should put it back in bootloader mode then do upgrade again, it did work for me
thanks newquaymarc
ive done that now ive got a low light page that says
"serial" at the top
"v1.03" at the bottom
any idea what i should do next?
Oooh upgrade seems to be installing \o/
Thanks
would you happen to know if there is any way I can manage my contacts from the pc? i searched activesync and there appears to be nothing there. My old motorola bought up kind of a virtual phone on the pc and managing and adding contacts was easy.
sisfis said:
would you happen to know if there is any way I can manage my contacts from the pc? i searched activesync and there appears to be nothing there. My old motorola bought up kind of a virtual phone on the pc and managing and adding contacts was easy.
Click to expand...
Click to collapse
Are you serious? Outlook/Contacts! Nothing easier.
hi again
ative sync should kick express in and that will manage contacts/calender
would using thunderbird as the default email client **** this up then?
sisfis said:
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
Click to expand...
Click to collapse
i was attempting to upgrade this xda that i just bought to this same version. is this the newest one? what version of windows is it? i got an error in the middle of the upgrade now it just shows the connection type at the top of the screen and V1.01 on it. tried the UpgradeUt_noID file but it says that it cant connect after about 3 minutes
sisfis said:
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
Click to expand...
Click to collapse
It's bcoz the flashing/upgrading/installing of ur fone seems not to be finished. Always follow instruction. If you really want to do something, think twice so you never messed up. nweiz, try to load it again in bootup mode and re-flash it. there are a lot of ROM for the Himalaya, you can download one. Try to search. again, FOLLOW INSTRUCTIONS!
Hi all
I have a Lobster 700tv phone which I think is brilliant, but I'm looking to upgrade the software from mobile 5 to mobile 6. I have windows xp on my pc is this possible?
The reason I'm asking is that my phone is somehow stuck in headset mode (even without the headset plugged in) and I can't figure out on how to get it back to normal. Even when the phone rings, I get the ring tone, but have to plug in the headset to answer the call. (I've done a cold reboot and it's done no good). I took it to a phone repair shop yesterday and they've said that it's a software error.
Has anyone else had the same sort of problems?
Or if anyone can advise on a possible solution (apart from throwing it out of the window!) I'd be grateful.
Thanks
If its a software issue a hard reset should bring you back im not sure what a cold reboot is so you may have tried this, also never heard of your phone so i wouldnt know ho to hard reset. If hard reset doesnt work then you will probably have to flash a new rom, possibly to wm6 if you can find the rom.My advice is lots of searching and reading... good luck
wm6 won't come soon to my and your lobby's screen
it requires a LOT of time to be done, special tools, extracted ROM for the operation and so on, (btw the phone isn't very commercial, wide-spread and so on, which is demotivating programmers)
ANYWAY, now on the topic:
you can try the CLEAR STORAGE option
found in accessories, it does almost fully hard-reset the phone, but preserves DAB app (I read somewhere, that hard resetting did remove the app, but I'm not sure now...)
anyway, here's how to do the hard reset:
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
If instructions don't appear on the screen, repeat steps 1 to 4.
it'll show the boot screen, and afterwards a black background with the typings, quickly press 0 to reset, sit and wait
as usual, backup all contacts, data, apps, stuff like that, and then do the job
p.p. Hard reset info via http://wiki.modaco.com/index.php/HTC_Monet
p.p.2 Greetings from Bulgaria, and sorry for my dumba$$ English :]
Hi there Prodigyfied,
Greetings from cloudy and overcast England.
Thanks again for the info.
I've tried what you've suggested, and it's still the same. Do you or anyone else have any other ideas?
Thanks
Paula
Sorry I didn't see this thread sooner!
it is a common fault with HTC phones and is a hardware issue - here is one of the MANY threads on modaco
http://www.modaco.com/content/HTC-T...aCo-com/229405/C500-Stuck-on-Headset-profile/
Should have enough suggestions to get you working!
Good luck.
Thank you
Thanks Confusious,
The suggestion in that other thread has done the trick.
You've made my day
Thank you.
Paula
so i was trying to put music on to my new HD2. ive had it about a good week and a half. the music never showed up on my device using windows media player sync then then Windows mobile Device center wouldnt recognize my phone.. then i tried to reset my phone and then thats when it happened. i cant get into my phone now.. i tried the whole battery out many many times... but no matter what i do it wont show my home screen. the phone boots up i guess.. it shows the tmobile screen...then the windows screen... but when the home screen is supposed to come up it doesnt.. just the wall paper.... and no buttons n screen touching work... i was able to get into the start menu for a bit but now..... nothing. im about to get my hammer and relieve some stress this phone is causing me... someone please help me out.
try a hard reset my friend, turn the phone off, hold both volume buttons down and the press the power button, its tricky to et first time, but it does work, follow the instructions and youre phone will be back to when you first bought it, bad point is u will loose anything you dont have backed up
but all files saved on storage card will be there after the hardreset.
DN41
It doesnt like being synced with windows media player.......
If you havent already hard reset then theres is a fix for you near the end of this thread
Next time your putting your music to your phone, drag n drop is the way to go........
So by accident I launched a CHT file from my SD Card which essentially crashed sense. No biggie, did a hard reset and thought I would be okay.
Wrong.
When I hold down the end key (to either load johcos' end key or even if i uninstall it) my screen is dead. The hard keys work, but not the screen.
Anyone have a suggestion? I have been using tmo-us stock rom without problems until yesterday when this started. I realize I could flash a new rom and maybe it is time...but tis very annoying this is happening after a hard reset.
Thanks.
still not working after flashing energy rom
argh.
flashed energy.
same problem.
now have to work...but any suggestions? my long hard key is dead and freezes my phone. hard reset/ new rom did nothing.
thanks.
same with android
so now anytime my phone goes to lock screen the screen stops functioning though the hardkeys work just fine.
thought i would try android and be savvy...but wrong.
same problem.
any ideas? i am ready to take a hammer to this damn thing...
This recently happened to my GF's phone, She said she was just playing a game one day, it froze so she popped the battery out and rebooted. Now every time she uses the End/Power ( red ) hard button to shutoff or wake up the device, the screen stays locked and won't respond.
I have tried soft reset, hard reset, different lock screens and what not. The only solution I found, besides sending it in, is to let the screen shut off by itself, and then wake it up with the Call/Send ( green ) hard button.
You can also try using the End/Power hard button to lock it, but then as long as you wake it with the Call/Send hard button it should be fine.
It has worked every time now. Try it and see if it helps! It's a little annoying but it saves money and insurance!
Going to repost this in all those previous listed threads to see if it helps anyone else.
Good Luck!