Hi,
i've an XDA 64 MB.
The Device are changed by O2 because the antenna was broken.
The new one are now with the newest SW:
Bootloader V5.22
ROM 3.19.01
Radio 4.21.00
when I want to reset the Time data in the Device-information
your SW not works well:
I've download the last Version 1.11 and have install the SW.
The SW starts and the INfo are:
Status: Ready
SID lock: <none>
that's all
How can I reset the TimeData for the Callingparameters?
I hope you can understand my problem, because my english is so bad.
With my old device your SW is running well and I have reset the TimeData.
Greetings
Joachim
Related
I Upgrade my O2 XDA II firm ware from ROM vesion 1.60.50WWE to 1.7.2.00 T-Mobile.
When upgrading to radio about 51% then has got a Error message ID 104 or 144 (I don't remember exacly) and guide include 4 step, summary access bootloader and reinstall.
I have reupgraded but received the same error.
after that I have downgraded the ROM vesion 1.60.50WWE but received the same error too.
Nowaday, My O2 can not start and I cann't doing any thing.
Help me.
Thank.
can you still get the boot loader screen or it's completely dead ?
If you still can, try flashing another ROM but after modifying the country code
Nowaday My O22 have been working, but I only use it with PDA function, no Telephone. Because process upgrade ware not completed. I was access boot loader and try reupgrade ROM with only radio stack many time, but any time upgrade when proccess write radio stack about 50% then Error. Although proccess erase radio no problem. I was try many other version ROM but the same error. If reboot O2, I must wait 20 minute It can working.
If enter Device Information:
ROM version: 1.72.00WWE
ROM date: 03/15/04
Radio version:
Protocol version:
ExtROM version:1.72.04
The boot loader version is 1.01
May have problem with hardware ?
Can have replace Flash ROM- Radio stack?
Thank You.
maybe it can work if you change your boot loader to 1.06
but now I haven't upgrade bootloader any time.
Can you help me how to change bootloader?
Thank!
HI
I AM IN NOW BIG TROUBLE
I HAVE O2 WITH SPLASH ON SCREEN AND HANGS THERE
all i done is upgarde downgrade from version 1.600 /1.66/1.72
all giving same errors
error 114 while erasing radio rom
this is RUUL LOG
9:54:14 Write block133
09:54:19 Update Stage 3 complete
09:54:34 Begin Stage 4
09:55:04 Radio Erase retry 1
09:55:34 Radio Erase retry 2
09:56:04 Radio Erase retry 3
`
THEN ERROR
NEED GUIDANCE
its a nogsm on screen
No GSM
1.72 wwe
thanks
no one has problem before ?
how to do with mmc card
why lauch vwrsion does not communicate with xdaII
i got Xda_II_LaunchROM_v10311
alos Xda_II_Upgrade_v16050
but this two cant communicate
also i put himupgradeUT in same folder but it gives error bed chacksum
i am becoming crazy now
OK.. can u tell me what version you have now? and what version are you trying to upgrade.. lets make this step by step.. i will try my best..
srtange
i had put my phone on charger after two hours
windows start up scrren appeared
also if i allow to reset phone hangs on O2 screen
its work ok now but without gsm
this is information
i got O2 XDAII
ROM VERSION 1.72.00WWE
ROM DATE 03/15/04
RADIO VERSION NOT AVIALABLE
PROTOCOL VERSION NOT AVIABLE
ExTROM VERSION 1.72.181
IDENTITY
Model No. PH10B
Platform: pocket pc
imei: not aviable
i cant flash radio part
my boot loader is 1.03
thanks and regards
Oh My God i dont know how to upgrade the bootloader... i think the problem is your bootloader cuz its not updated.. it sgould be 1.06 and all of that will work fine.. i dont know how to upgrade the bootloeader...
Hi everyone,
I've tried to upgrade my PDA from:
ROM version - 2.06.00WWE
Radio - 1.14.00
ExtROM - 2.06.100a
to
ROM version - 2.06.00WWE
Radio - 1.18.00
ExtROM - 2.06.100a
but it went wrong during the erasing proces. The only thing on my grey screen is USB and v1.02. I've tried the setup again but it keeps by zero percent during the erasing proces, followed by error 112. Also I've tried a hard reset but nothings hapens. After the hard reset the screen shows USB and v1.02.
Can someone please help me out.
Many thanks
powerkite
problem solved
I had ot give the device a hard reset (you know styles with on/off button) in combination with the button between both phone buttons. After this run the upgrade again. It will not show information of the device version, only the version you want to upgrade to.
good luck
powerkite
Hello Powerkite!
Hod did you manage to upgrade a Qtek2020 to rom version 2.06. I am lookingall over to do so, but I can't find a good (clean) solution.I am not a programmer or a computer freak therefor I am looking for an easy solution.
thanks
Eddy
Try the following link: http://forum.xda-developers.com/viewtopic.php?t=13588&postdays=0&postorder=asc&start=0
Hi and thanks for any advice!!!!!!
I bought a qtek2020 off ebay, and when I received the pda it had chinese (OS).
I'm not fluent in chinese or even english for that matter,
so I placed the new WM2005 OS, on the unit and had a difficult time with the unit.
so I found this forum meaning, XDA-Developers, AND (I"M DAMMED GLAD I DID),
anyway I downgraded the pda to (XDA2JoJo.v3.2zs)2003SE.
and the program went through all the (1 through 5) steps, on loading the new (OS), it took about 55 min, to load the new OS, so I thought I was good to go.
now my problem is that when I go to (Device Information) the unit reads,
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: NONE
Protocol ver: NONE
ExtROM ver: XDA2JoJo.v3.2zs
I can not read the (IMEI)# on the unit when I type in (*#06#) it does have the # on the back of the unit under the battery.
I had checked the IMEI# to see if it was blacklisted and the # came up clean and good to go.
The unit will not read the sim card when I put it in, and it does say the unit is unlocked when I ran the XDA2unlock proggy I got from here.
I did do a seach here and either I'm just (stupid) and don't understand, or all of the above.
can someone point me in the right direction to this matter of no (Radio version) and no (Protocol version), and why the unit won't read the sim card?
Thanks in advance'
r_ :?
my BA does the same.
my BA does the same.
If I reset it, it sometimes restart with Radio, ok.
My Jamin is totall stuck at the moment after ROM update of Prophet. I cannot even restore it to Factory Defaults. It was successfully upgraded started once but halted when i restarted it, now after the first screen, it only shows a white screen and stays there forever. i tried to restore it to factory defaults. was able to do that aswell but still no luck. the light stays there forever. Active sync ann LAN is showing Limited or no connectivity when i try to connect so i am unable to do anything. Is there any way to restore it back to its previous settings or do anything to make it work. The first screen which it shows only has the following information
IPL 2.13.0001
SPL 2.13.0001
GSM 02.07.20
OS 4.0.0.0
kindly help.
if it goes into bootloader mode(press Camera button+ while pressing soft reset),download this http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe ,and flash it.....
bootloader
only if u can get into bootloader mode (reset + cam button)
c ya
I fixed my Jamin
Thanks Guys. It worked. I holded the camera key button on the side of the phone and pressed the soft reset key. Then leave the soft reset key but keep pressing the camera key takes the phone in the 3 color mode. After that i connected the USB to the computer and started the ROMUpdateUtility_NV_G4 file and it worked. Now everything is fine. Can someone now tell me from where to install new Windows Mobile 6.0 on my device? At the moment if i goto Device Information onmy mobile, following lines are there
ROM Version: 2.20.7.34 WWE
ROM Date: 7/10/06
Radio Version: 02.07.20
Protocol version: 413.1.03
http://forum.xda-developers.com/showthread.php?t=310452
Upgraded to WM6
I have upgraded my mobile to WM6 now. Below are the details now
ROM version: 4.0.0.0 WWE
ROM Date: 2/15/07
ExtROM Version: 4.0.0.3 PDAViet
What is the difference in the new version Rom 4.0.0.0.4 PV ???
fmmalik said:
I have upgraded my mobile to WM6 now. Below are the details now
ROM version: 4.0.0.0 WWE
ROM Date: 2/15/07
ExtROM Version: 4.0.0.3 PDAViet
What is the difference in the new version Rom 4.0.0.0.4 PV ???
Click to expand...
Click to collapse
4.0.0.0.4,has some HTC Touch software..... But,mate,there are 2-3 threads about it......READ AND LEARN...