who can help me
need to put rhs and ce back
i dont have a backup
please help
with xdarit i can make a sd card
but i dont know how to do this for the radio
please help
regards mike
what was your previous RSU version ?
If it's available on the net (like TMO 6.24 or A20.10) you can simply down load it and flash your device through the PC.
Good luck ...
i have the same problem
I have the same issue please email at [email protected] if you manage to resolve. I will do the same.
who ever is first
i think i had 1.97 and i wanted to up to 2.21
orgiginal from telfort
i think i had 1.97 and i wanted to up to 2.21
Click to expand...
Click to collapse
I can't recognize these versions numbers. Anyway, if your device can still be connected to the PC, you can get a new ROM and a new RSU from www.yorch.net. If not and you still have your boot loader working, you can creat a RSU+ROM image from another working device and flash your XDA using SD card. Nice page for details http://www.zensay.com/qtek/
Good luck ...
the link is what mine is about but i cant find the repair.zip
http://www.xda-developers.com/forum/viewtopic.php?t=2489&sid=8c1aea80a41318c77a50013b562fe4df
whohave this file?
the link is what mine is about but i cant find the repair.zip
http://www.xda-developers.com/forum/viewtopic.php?t=2489&sid=8c1aea80a41318c77a50013b562fe4df
whohave this file?
i found the repair .zip now its compleatly dead no boot no nothing
whewhe dont know what to do.
Related
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Who the f*ck claimed that you should install an official update via SD?
Do you don't know, that you will lose your HSPL and there is still no HSPL for 3.03?
Please follow this thread, maybe we can solve your problems...
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
IndigoHD said:
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
Click to expand...
Click to collapse
Yeah!!!!
Crusoe86 said:
Yeah!!!!
Click to expand...
Click to collapse
Thank you so much Crusoe. So very, very, very much... you and everyone who tried to help me.
It doesnt matter that i ended up getting it to work again differently..... i owe you one.
All of you.
and Crusoe... if you have some time to teach me the things i OBVIOUSLY dont know..... id love to just talk to you.
I guess i have a LOT to learn.
Some kind of isntant messenger? perhaps?
htc hd2 softwared update failed
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
ricotreo700p said:
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
Click to expand...
Click to collapse
Tried this and solved same error :
http://forum.xda-developers.com/showthread.php?t=668347
please tell me how did you fixed it?
kurt-willems said:
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
Click to expand...
Click to collapse
wow,
really nice help,
hope i can fix my hd2
thanks cruise for all the nice tips and tricks...
Look i dont know whats the difference between hspl and hspl3 ( and i have hspl3).... i need to know which stock rom to flash back without bricking the phone and, do i have to put regular spl back on the phone so i can get a replacement device. The screen is not responding at all. i cant dl the stock rom from tmobile website because it wants my IMEI# i cant navigate to the menu on my phone cause the screen doesnt work. please some one post a link here to a stock rom that i can flash that will not brick my phone. Im kinda confused cause i read around that if u have hspl3 flashing to a radio 2.10 or 2.13 will brick it thanks !
oh yeah this is what i have running on my phone so far http://forum.xda-developers.com/showthread.php?t=843221
ihateu said:
Look i dont know whats the difference between hspl and hspl3 ( and i have hspl3).... i need to know which stock rom to flash back without bricking the phone and, do i have to put regular spl back on the phone so i can get a replacement device. The screen is not responding at all. i cant dl the stock rom from tmobile website because it wants my IMEI# i cant navigate to the menu on my phone cause the screen doesnt work. please some one post a link here to a stock rom that i can flash that will not brick my phone. Im kinda confused cause i read around that if u have hspl3 flashing to a radio 2.10 or 2.13 will brick it thanks !
oh yeah this is what i have running on my phone so far http://forum.xda-developers.com/showthread.php?t=843221
Click to expand...
Click to collapse
imei is printed under battery. maybe this help.
criszz said:
imei is printed under battery. maybe this help.
Click to expand...
Click to collapse
thanks i downloaded this stock rom: T-Mobile_HD2_MR_Software_3.14.531.1 i have 1 question after i flash do i still have to remove hspl3 ?
ihateu said:
thanks i downloaded this stock rom: T-Mobile_HD2_MR_Software_3.14.531.1 i have 1 question after i flash do i still have to remove hspl3 ?
Click to expand...
Click to collapse
no. stock rom flashed from sdcard will remove hspl3
ok i dont know how to do it from the sd card why cant i just do it from my pc ? and if it requires that i have to click on something or open it on my phone i cant because the screen is not responsive
ihateu said:
ok i dont know how to do it from the sd card why cant i just do it from my pc ? and if it requires that i have to click on something or open it on my phone i cant because the screen is not responsive
Click to expand...
Click to collapse
do it from your pc , nothing bad could happent.
Can anyone point me in the direction of flashing a ROM with an SD card?
Can this be a custom rom?
I flashed via sync (cable) a zillion times, but latest chuckydroidrom I flashed, my phone can't be recognised anymore, so no active synch. but the phone does work. only I can't sync which is obviously a problem..
can anyone help me?
Thanks for the support
edit: I downloaded an older version of windows mobile device center and that did the trick!
1) Prepares your SD (<8GB SD Card)
a) Format your SD by FAT32
2) Take the "RUU_signed.nbh" from your ship ROM and copy it to the SD card.
3) Rename the "RUU_signed.nbh" to "leoimg.nbh".
4) Reset the device while pressing the volume down button.
5) Follow the instructions on your screen.
thanks kurt
Version of OS: 5.2.21869
Manila: 2.5.19211619.0
ROM: 1.66.404.1 (76641) NLD
RADIO: 2.06.51.07
this was my rom, where can I find this stock rom? And does the install of this rom erases HSPL?
will this one be good: RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Here you have the 1.66 NLD stock ROM and yes, flashing over SD will remove HSPL.
thank you for the advice.
I will wait for the dev and if he answers (I really hope so) to help, and if not this is my only way out. so thanks for your advice kurt! really strange that the phone won't sync.
HectiQ said:
thank you for the advice.
I will wait for the dev and if he answers (I really hope so) to help, and if not this is my only way out. so thanks for your advice kurt! really strange that the phone won't sync.
Click to expand...
Click to collapse
Can you get into Bootloader? if you can, and connect from there to your PC; it will mention "USB" at the bottom. If this is the case you can also flash.
kurt-willems
Can you please tell me,why my hd2,not flashing from SD.J tried billion times,with 8 sd cards.
Boot,shows loading for a millisecond,and boot again.Its brand new phone,last one was same hd2,but none of those problems.
Please help,or any suggestion.
kurt-willems said:
Can you get into Bootloader? if you can, and connect from there to your PC; it will mention "USB" at the bottom. If this is the case you can also flash.
Click to expand...
Click to collapse
yes, I can get into bootloader, but then I get the message that the qualcomm driver is not found, and before it always found it. very strange! and I tried on all my pc's, not one can recognise it
msg: qualcomm cdma technologies msm driver not found.
HectiQ said:
edit: I downloaded an older version of windows mobile device center and that did the trick!
Click to expand...
Click to collapse
Nice to see it's bean solved.
iannius said:
kurt-willems
Can you please tell me,why my hd2,not flashing from SD.J tried billion times,with 8 sd cards.
Boot,shows loading for a millisecond,and boot again.Its brand new phone,last one was same hd2,but none of those problems.
Please help,or any suggestion.
Click to expand...
Click to collapse
Use a smaller SD card. 8GB SD cards caused lot of problems.
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.
Hi Guys
device's software crashed and remaind on the logo screen.
and device's rooted and unlocked. TWRP installed
I need custom rom or orjinal rom help
CID:HTC__621
LK: 1.01.0000
OS: 2.30.709.2
If you already took S-Off, I have the RUU for 2.32.401.1 version that I can send you. But you will need to change CID and MID (hence the S-off...). Otherwise I will have to download 2.30.709.2 and upload it but I reached my data limit today, I can do that tomorrow. Let me know.
I uploaded the RUU for 2.30.709.2. Here it is
https://drive.google.com/open?id=0B_BPVbgprz1udWxWRWVlVHZYNGM
If I helped feel free to donate
nuts77 said:
If you already took S-Off, I have the RUU for 2.32.401.1 version that I can send you. But you will need to change CID and MID (hence the S-off...). Otherwise I will have to download 2.30.709.2 and upload it but I reached my data limit today, I can do that tomorrow. Let me know.
Click to expand...
Click to collapse
If you wouldn't mind uploading the RUU for 2.32.401.1 I would greatly appreciate it. What CID and MID would be necessary for 2.32.401.1 ?
Schulzm13 said:
If you wouldn't mind uploading the RUU for 2.32.401.1 I would greatly appreciate it. What CID and MID would be necessary for 2.32.401.1 ?
Click to expand...
Click to collapse
Will upload it later today. Supported CID are as usual for .401. builds I guess.
nuts77 said:
Will upload it later today. Supported CID are as usual for .401. builds I guess.
Click to expand...
Click to collapse
You are awesome man, thank you very much. Yeah just found this post explaining the HTC build versions.
There you go
https://drive.google.com/file/d/0B_BPVbgprz1uaS1VQXhTX21SdW8/view?usp=sharing
sHi Nuts77
I try to flash RUU for 2.32.401.1 on my HTC One M9 Prime camera .401 build but the file is corrupted....
My One M9s is bricked...
Could you upload RUU again ?
Many thanks
BMW31 said:
sHi Nuts77
I try to flash RUU for 2.32.401.1 on my HTC One M9 Prime camera .401 build but the file is corrupted....
My One M9s is bricked...
Could you upload RUU again ?
Many thanks
Click to expand...
Click to collapse
The RUU I posted above is for One S9 ! Not for One M9s, nor for One M9 prime camera edition.
I'll check if I have a RUU for HTC One M9s but I don't know if you will be able to flash it now.
Can you still access to the booloader ?
edit : check this thread
Hi Guys,
Thanks for the RUU
I tried to instal it, but I have 'Zip file is corrupt'
An idea ?
jehan63 said:
Hi Guys,
Thanks for the RUU
I tried to instal it, but I have 'Zip file is corrupt'
An idea ?
Click to expand...
Click to collapse
what method did you use for flashing?
Did you check file size / try to download file again ?
nuts77 said:
what method did you use for flashing?
Did you check file size / try to download file again ?
Click to expand...
Click to collapse
I did this : https://forum.xda-developers.com/one-s9/how-to/root-twrp-s-off-how-to-root-htc-one-s9-t3459595
Yep I tried re-downloading it, not better: s
OK... That's a Root method. That's not how you flash a RUU. You can't flash an RUU from recovery.
You need to flash from fastboot (computer) or rename and place on root of your SD card and start in download mode.
I suggest you search and read tutorials on how to do that
8.0 Android ROM for the HTC One?
nuts77 said:
The RUU I posted above is for One S9 ! Not for One M9s, nor for One M9 prime camera edition.
I'll check if I have a RUU for HTC One M9s but I don't know if you will be able to flash it now.
Can you still access to the booloader ?
edit : check this thread
Click to expand...
Click to collapse
8.0 Android ROM for the HTC One S9?
Please help me !
Sorry to bump this but for unknown reasons my S9 stopped booting. It is same as OP (Asia 621, OS 2.30.709.2, LK-1.01.000), but completely stock, never unlocked, and unfortunately I hadn't even enabled the "unlock bootloader" in developer options, so now I can't even unlock it (unless there is a way I don't now about).
The story is that for over a year now, I have been using my SD as internal. This morning I thought I'd reboot my phone (after several days) because it was getting hot (and battery draining) and laggy. It got (many times) stuck on "optimizing app X of Y" on SD. So I turned it off (through reset button combination and bootloader), removed the SD and succesfully booted it. However, as I tried to insert the SD, as the only way to recover some files I needed, it got to 'optimizing apps' again, exactly the same, from where it never progresses. So I (a posteriori foolishly) thought I'd clean the cache to get rid of that. It never booted again, neither with SD, no SD, factory reset, etc.
I have tried factory resets via recovery (have removed sd and even SIM), I have done integrity checks in recovery (no problems, every time), yet I won't get past the htc logo.*
Now I tried to (adb sideload) the RUU provided by nuts77 (the asia 2.30.709.2) but it aborts every time at about 40% of loading, no other message. In the logs I find the (quite expected) "signature verification failed"
*When I try to boot it (after wipe etc.), after about 20 minutes of htc-logo, it just goes to bootloader.
Any ideas? I have quickly gone through recovery's kernel logs, but I don't have any good idea what I should be looking for, since the output is quite verbose, and I can't easily figure out what is relevant or not, (I have been an embedded dev, so I am not afraid to go technical if needed), because I haven't worked with an android device before
Any help would be deeply appreciated as I am stuck with a bricked phone on a foreign country
Thanks!
hi pls help me
hi nuts77
How can i overclock my phone or install cwm on my device
We have a htc one s9
tnks
nuts77 said:
Tamam... Bu bir Kök yöntemidir. Bir RUU'yu bu şekilde yakmazsınız. Kurtarma işleminden bir RUU'yu flash edemezsiniz.
Fastboot'tan (bilgisayar) flash'lamanız veya yeniden adlandırıp SD kartınızın kök dizinine yerleştirmeniz ve indirme modunda başlamanız gerekir.
Bunun nasıl yapılacağına dair eğitimleri araştırmanızı ve okumanızı öneririm.
Click to expand...
Click to collapse
Hello
do you have the firmware? is it possible for you to share? The link you shared has been deleted.