change the handsfree button delay on ppc phone edition? - MDA, XDA, 1010 General

I want to shorten the lenghth of time that the send button has to be held down to activate hansfree speaker phone. Is there developer tools for this of does anyone know how to fix this. its over my head so far but i use the speaker phone alot and would really like to change this.
Thanks, John
[email protected]

Related

the phone rings, and I can't hear the caller

frankly , i am frustrated with my PDA2k !!!
many problems that I face i can live with, but , when it comes to not beeing able to answer a call with a very expensive pda!! ( i recieve a call , and the other party and me , can't hear each other, which only soved by hard reset ) that's really very nasty.. is there a way to overcome this problem. i updated my device with 1.40 latest one, but no change , same
please give me a clue!
thank you
bluetooth tools does that
it try automaticly to direct the call to a headset
it should give you back sound when it's don trying
you can set the time in the reg or not use bluetooth tools
Other solution is keeping the bluetooth connection always on (click on the little clock on the ad-in of the bttools. The problem with this is that the battery goes flat very fast.

09f Fix / Tweak

Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
rob_milton said:
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
Click to expand...
Click to collapse
Hey Since you're new I'll provide a link. It should be located somwhere on this page in this thread. BT Voice Command something or other
http://forum.xda-developers.com/showthread.php?t=283412&page=32
Give a man a fish and he eats for a day. BUT!!! Give a man a fishing pole and he eats for the rest of his life.
Check out this wiki. You can find just about everything you are looking for here.
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
When you get everything all hooked up join us in the Jawbone thread. I'd like to hear your experience with it. I'm gonna test mine today with the sunroof back and drivers window down doin 80+...see if they can hear me now!
X
p.s. IF you have issues getting it to work there are some great tips in that entire thread. It's great reading...especially when you get it to work in the end. BOO YA!
Xultar,
Thank you for the response...
I am finding it interesting to read through all the information on this site. I had already spent a lot of time in the WIKI that you referenced.
I guess I'm just dense, but I still can't find the file 0.9f (.cab ?). The thread you referenced says download it. But it doesn't say where? I can't seem to find it anywhere on this site or by Googling...
Can you point me in the right direction?
Thanks,
Rob
Ok... I finally found the 0.9f cab...
The instructions say to 'run' it. I don't know how to 'run' the cab file?? I unzipped the zip file I downloaded. What do I do with the cab file?
Thanks,
Rob
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
rob_milton said:
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
Click to expand...
Click to collapse
There should be an icon in your program menu for BT Voice command config
enable it I sent my VC duration to 20. In the bottom left corner it should say version 0.0f
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
rob_milton said:
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
Click to expand...
Click to collapse
Actually no headset can handle wind noise very well.
About MS VC 16 and 0.9f...A hard reset may be necessary but if you want it to work...and it does a hard reset is worth it. For what it is worth 0.9f works in general with all BT headsets.
Good luck
X
I can say that it works great with the SE DS970

Turn AUTO on BT on incoming call

Hi gurus!
I wish to know if there is a reg edit to change something to turn on automatly on incoming call.
I know some soft to do this but don't owrk well with WM5 & WM6.
some of theme BTTools, phoneAlarm-v1.6...
So if there some soft that work ok....
Thanks!!!
PD: Sorry for my english
Hi there,
I had the same problem, at the moment I use CommMgrPro on WM6, but this software is able to do a lot more than just to switch on Bluetooth. The problem so far is when the phone is ringing, it takes a while (2 rings) Bluetooth is switched on, another two rings the headset is connected to take over the call. So I'm not totally satisfied with the solution.
Here you can find the tool:
http://www.commmgrpro.com/
Greetings
Naylos
I'll test
Thanks dude!!!!
davicito13 said:
I'll test
Thanks dude!!!!
Click to expand...
Click to collapse
I do not get your problem. I use Jabra BL headset (two different models) and do not need any additional software to be able to answer the call with BL headset. I can hear beep in my Jabra and can push the button to receive a call. Just simply have paired my Jabra with my X7500.
Hi all, Im noobz
probably what davicito13 ask was how to make the BT automatically switched on ONLY when theres an incoming call and automatically switched off when finshed.
(triying 2save batery i guess)
CSDEVCTRL
CSDEVCTRL has this option. Works perfectly on HTC Touch.
http://forum.xda-developers.com/showthread.php?t=386451
Hi,
I did Mortscript code this "BT on with call" functionality for use with PocketMax.net PhoneAlarm. Penguin has reported that the next version already has that functionality when he releases it.
The script can easily operate independently from PhoneAlarm.
I did post the script over at PocketMax forums, and if anybody ever wants that app, let me know and I will repost it here as well.
If I leave my BT on, even with a extended battery, my phone dies twice as fast.
With PhoneAlarm I could have it turn the BT on or off with power. The real issue for my phone is that PhoneAlarm is the only BT toggler that works.
Anyhow, if you want it let me know.
thanks, Keith
MortScript
Hey Keith,
please post this MortScript-code.
Thanx Ralph
Re: Bluetooth on/off w/power
« Reply #13 on: October 05, 2009, 02:19:26 pm »
--------------------------------------------------------------------------------
Hi,
Here is a script i wrote for PA that automatically turns on the bluetooth on an incoming call.
This can be added to a PA profiles' run application option.
Of course my phone has a window that says "Phone - Incoming...", other phones may have a different window title. If you ignore the phone call that window hides in the background so shutting the bluetooth off automatically is tricky. I did set the script so it turns off bluetooth if you look at "Call History". There may be a better way to know the call has ended. I am not sure the "Phone - Incoming" window closes after you exit the call.
To kill the script, you can also witch to a different profile than "Car=On" or the profile that was active when you ran the script.
From here that leaves the door open to an auto-answer with speakerphone option. Very easy.
If you do add the command line option for BT toggle, I can just turn bt on without switching profiles to Car.
I also updated the Status script to add the BT on Call message.
--------------------------------------------------------------------------------
PaBTonCall.zip (2.73 KB - downloaded 27 times.)
Keep in mind this is an antique. Probly like 8 months old. Ok maybe like 4 months old. seems like a long time in mortscript years.

[Q] Ringtone volume keeps turning down

Hey guys, I'm having this issue with my stock Razr Maxx, where the ringtone volume turns down (close to silent) and I don't even know it unless I receive a call and there isn't any noise around (or else I totally miss the call).
I understand this is probably a well known bug, but I would just like to know if there's anything triggering it, so I know how to avoid this. I'm using a bluetooth headset every day, at work, but I haven't figured out a pattern yet, or even if the bluetooth headset is causing this.
Help? Please?
teomor said:
Hey guys, I'm having this issue with my stock Razr Maxx, where the ringtone volume turns down (close to silent) and I don't even know it unless I receive a call and there isn't any noise around (or else I totally miss the call).
I understand this is probably a well known bug, but I would just like to know if there's anything triggering it, so I know how to avoid this. I'm using a bluetooth headset every day, at work, but I haven't figured out a pattern yet, or even if the bluetooth headset is causing this.
Help? Please?
Click to expand...
Click to collapse
Looks like your bluetooth headset may be changing the volume without your consent.
Try to plug it off at least for a day and see if the problem happens
It looks like it wasn't the bluetooth headset.
During the weekend I haven't used it and this morning the volume was all the way down...
I have disabled the 'increasing volume' setting from my alarm and see if that helps, as I realized I always snooze or stop the alarm while it's still barely audible.
=P
I'm used to have three different alarms. I don't like snooze...i prefer to sleep more ten minutes and have a different alarm. Since i'm sleepy when i look the alarm i tend to cancel it instead of snooze also
Some time ago i had a similar problem with my XT910. After taking it to a authorized local service my volume up key wasn't working anymore ; they fixed it somehow.
Why don't you try to install an custom rom or reflash your actual rom ? It would tell us if your problem is hardware or software (if the problem persists with another rom surely its a hardware thing - i don't think kernel is related to this).
I will be flashing the official JB when it comes out, hopefully soon. I've got the "MERetail.en.06" software version now and I understand this is the Middle East version, which will not get the JB OTA update, so I will have to flash another ROM anyway. I'm willing to wait for it to come out first.

Need Ulefone Power Armor 13 Engineer Mode Audio Levels

I'm new to this forum. Please let me know if I am doing something wrong. On my Ulefone power armor 13 phone, the volume from the handset was very low. I opened engineer mode by dialing *#*#3646633#*#*. I changed the sound levels. But I didn't know exactly which setting I changed. That's why I need default settings right now. I can't reset my phone because it has too much data and I'm not in a position to back it up yet. I need someone using this phone to share all sound levels as screenshots or text. Thank you in advance.
Hey, I have the same issue of quiet headset. I have to keep saying "WHAT? Can you please repeat" Loool it's not that often, but happens sometimes. I had it with my Doogee S90 too. But I don't remember how I fixed it lol.
What screen you wanna see I will be happy to share.
Btw, I think the right thing would be using Viper Magisk module. But, I haven't tried it myself.
This is the Audio and voice settings.
Yes, that's what I'm talking about. But I need all the settings. For example, if we take the first picture you took, I need all the settings after clicking the "system" tab. And the same things need to be done for the other tab "bt a2dp". I want something very challenging but I really need it. Because my headset was too low. I increased all the levels as I don't know which setting fixed it. Now headset is fine. But this time other audio-requiring things like audio recording and video recording got worse. I am on a business trip. That's why I haven't taken the phone with me right now. If I solve this problem, I will start using it again. It has incredible battery performance and that's what I really need. Thanks again for your help.

Categories

Resources