Darfon G7B0 foldable keyboard worked with Qtek 1010. Now with Qtek 2020 doesn't work anymore (please, dont suggest to turn off beaming because I know that and even if turning it off doesnt make the keyboard working).
I have discovered that on Qtek 1010 COM1: (used by default by the kbd driver) is managed by serial.dll while on Qtek 2020 is managed by com16550.dll
Maybe someone of the Team is able to cook a patch?
Thanks, byez
Did you solve that problem
Hi,
I have an Xda II and use a G7B0, Darfon, foldable keyboard. It worked before the upgrade of the Xda II software. Now, it doesn't anymore. Did you solve the problem? Could you tell me?
Thanks in advance.
Cheers,
Manfred
Frankfurt
Germany
[email protected]
Darfon keyboard
Most likely you have activated the infrared com after the rom update. In order for the keyboard to work you need to untick the "Receive all incoming beams" and then activate the darfon keyboard. To find the tick box go to settings->connections->Beam.
Hope this solves your problem.
Related
Dear,
My external keyboard driver for the OEM 02 XDA external keyboard has ceased to work with my newly installed ROM 4.00.05 (i.e.the Keyboard connection mode always switch back to Infrared connection Mode). Anyone who how to activate the external keyboard? please suggest! Thanks in advance
Try going into Start->Settings->Connections->Beam and unchecking "Receive all incoming beams". This will stop the device holding open the COM port, and should release it for the keyboard driver.
hope this helps
Dear,
Thousand thanks, it works very well now
I have a big problem. I need conect my XDA with GPS. My ROM is 4.01.16 US. But when I start my GPS program, I see mesage, that COM1 port is in use by another application. If I reset my XDA problem is same. Under PPC 2002 (ROM O2) it worked without problem. But I would like use this under WM 2003. Can you help me, please ???
Sajfi
PS. Sorry for my bad English, but I hope, that will you understand me ...
Turn off the IR port on setting .
Sebi said:
Turn off the IR port on setting .
Click to expand...
Click to collapse
Thank you very much !!! Now it work correctly !!!
Turn off the IR port on setting .
How you do this? There is only a under beams "receiev all incoming beams". Or where is an other place?
Uncheck the receive all incoming beams, that will release com1 for the other application.
I recently updated my Imate PPCPE with the new ROM for WM2003SE (2.06WWE). I was previously running 1.72WWE which is WM2003.
The upgrade seems to have gone well with no issues I can notice so far except that I can not use my favourite input program Decuma OnSpot anymore. When i Install it, it just messes up the whole input functionality and ALL the input methods disappear. i.e. when i click on the little input panel button on the lower right of the screen, nothing happens. Nothing comes up and there is no way to select an input method or do any input.
Even the (default) keyboard doesnt show up anymore when it is supposed to (i.e. when i am on an input field).
Has anyone seen this issue? any idea about what is causing this or how this can be resolved? maybe there's a registry setting somewhere that can help?
got a crack for it ?
I have the same problem running WM2003SE on MDAIII
Hello all people, I'am spanish and my english is very bad.SORRY
I have a WM6 XDA 0.20.1 and radio 1.40.30.0 andd spl 1.40Oli.
I work very good my bb conect modify by XDA... Thanks a lot.I need this for work every day.
But I have a big problem with the videocall, my Tytn is bloked when i call with video, and make very cut. I install all cab's by XDA, but dont work fine????
It's posible good work the videocall in this WM6 XDA?????
Thanks and sorry for my english.
Good evening
Try WM6 Black 2.0, video call works very well.
Thanks mrvanx
But with this version of wm6 work my blackberry conect, and where download bb work with this version of wm6.
I have wm6 XDA 0.20.1 because work with bb.
bb connect will work with Black 2.0 as the build number is editted to 5.1.195.
Try Black 2.0
thanks now install this version.
thanks mrvarx:
Yesterday I install black 2.0 and work very good, at the videcall is good...
The bb Connect work very fine.
I like to much the parrot ck3100 because now I see in my display parrot the batery and line.
See you...
Video call feedback image is black
mrvanx said:
bb connect will work with Black 2.0 as the build number is editted to 5.1.195.
Try Black 2.0
Click to expand...
Click to collapse
Hi,
My post may be related to WM6 upgrading, but ...
I'm running the 20070326 - LVSW Ed.
When I place a Video call (3G / plan allows it) :
- I receive the image from the other 3G phone,
- But the Hermes internal camera sends a black image (no image ?) to my Hermes screen (my video small) and to the 3G phone I called.
- Same problem for incoming and outgoing video calls.
I applied the relevant reg tweaks (htcTweakUI, fit4cat Hermes, ...) and patches.
I've been having this problem since I flashed my Hermes for a WM6 ROM.
It was working with WM5 (but don't want to go back...).
BTW : a hard reset didn't fix the problem.
Thanks.
frav said:
Hi,
My post may be related to WM6 upgrading, but ...
I'm running the 20070326 - LVSW Ed.
When I place a Video call (3G / plan allows it) :
- I receive the image from the other 3G phone,
- But the Hermes internal camera sends a black image (no image ?) to my Hermes screen (my video small) and to the 3G phone I called.
- Same problem for incoming and outgoing video calls.
I applied the relevant reg tweaks (htcTweakUI, fit4cat Hermes, ...) and patches.
I've been having this problem since I flashed my Hermes for a WM6 ROM.
It was working with WM5 (but don't want to go back...).
BTW : a hard reset didn't fix the problem.
Thanks.
Click to expand...
Click to collapse
The black 2.0 wm6 have a littel options on back the screen when you speak in videocall, and you need press this options because one option don't see another is for the back camera another option is for front camera etc... you see this options....
Hi All, I have a company car coming (a Passat) and I understand from a colleague it has a built in bluetooth car kit that requires access using rSAP. Does anyone know if the latest 6.1 stock rom from HTC has the rSAP setting/function? I really don't want to have to change my Touch Dual (MDA Touch Plus) for another phone like the Touch Diamond if I can help it. If someone knows of a work around then I'd appreciate it if they can offer me any help. Many thanks!
Hi, I feel foolish as I've now realised tha the T-Mobile rom does offer rSAP access. I expected the settings to be under the connections tab but it was under the systems tab! I wondered if any of you kind people could let me know if the new 6.1 rom has a SAPSettings icon so I can upgrade and know I'm not going to loose a vital function.
Hi Dean !
Yes it has rSAP settings. It works with the Passat. /Touch dual-Niki/ Europian version.
Thanks [email protected], I have tried the 6.0 rom with my Passat. I can initially connect OK and use the phone no problem but once I leave the car and return it just says "connecting" when I insert my car key and nothing happens. I think I will have to update my rom to the newer 6.1 version and I'm hoping this will cure my problem.