In my old handspring Treo and even on my T720 I could get the phone to play (enter) extra digits attached to each phone number on my speed dial.
Can the SX56 XDAI do this?
If so how?
bump
Related
XDA (Siemens SX56) would complain service code must enter from the keypad. We have serveral call forward numbers in the contact list that we use regularly. Every time, we try to use MS Voice Command to dial those call forwarding number, it would complain and would not proceed with the action. Any ideas? work around would be greatly appreciate!
Example, for Rogers AT&T in Canada, *21*<phone number>#, will call divert (forward) the mobile number to another number.
I have the same problem on Rogers ATT with XDA II... not sure what causing it. Anybody? Any ideas?
This is a Microsoft issue. They are aware of it, and it is on their list of things to fix. Just not that high up the list.
:roll:
Speed dial seems to the only way to do gsm service code
Speed dial is the only way to get call forwarding working. However, MS Voice Command does not seem to allow speed dial a number.
Does Speed-Dial work for you?
Like others, if I store a *21* sequence as a contact, and then use this to establish a speed-dial entry, I get the "must use phone keypad" error message.
I haven't been able to directly store a number as a speed-dial. "New" only lets me select something from contacts, and "Edit" only lets me change the name and speed-dial location, not the dial string.
Have you actually been able to store a *21* string directly into a speed-dial and have it work properly? If so, can you tell me how?
Thanks
I have the AT&T 8525 and cannot get it to do voice digit dialing. I am using Voice Command 1.6 I can say call (any one in my contact list) and there is no problem. Any other command and nothing happens. I tried with BT (Plantronics Voyage 510) and without. I am currently using the vp3g 3.62.3 ROM. It didn't work with the AT&T rom (WM 6 or 5) either. The Cyberon system has digit dialing disabled in the US. Is there a setting (other than listed in the WIKI) or another program that will allow me to do the voice digit dialing?
I have heard from other users that digit dialing is working for them.
Any solutions out there?
Thanks
Hey Guys!
I'm having some issues in contact identification in Brazil and would like to know if you share the same problems in other countries. (And, .:hopefuly:., if you have a solution for this)
In Brazil, to make long distance phone calls we have to store our contacts number in this format:
0 + Operator + Area Code + Phone Number
For short distance calls, you could use just the phone number or the "full" number with the zero, operator and area code numbers.
Considering this, I've always had my contacts full numbers stored in my phone in case that if I go to another area code, I'll still be able to call my contacts from my city and from somewhere else.
The problem is: Whenever I get a SMS / MMS, the operator send the number in the following format (with a missing operator no.) and the phone won't recognize it as being a contact number.
0 + Area Code + Phone Number
I used to have nokias phones (n95, e71), motorola's, etc. and they all were capable to identify the contacts in SMS and phonecalls. I'm probably doing something stupid with my phone here.
It may be relevant:
Phone numbers in brazil: 8 digits
Area codes: 2 digits
Operators: 2 digits
ps.: If I misused the "operator" word, you can undestand it as being like "Sprint", "Verizon", "O2" and other companies that may provide you with long distance services. Eg. I could be a sprint user and use verizon's long distance service.
What your operator?
Thx
EMERSON VIER
My current phone operator is TIM - Brasil - São Paulo (11)
Every SMS I get has the phone number in this format:
0 + Area Code + Phone Number
Does android allow some sort of "default" operator for every phone call?
I'm having the same problem with my phone, I'm also a TIM subscriber.
The only (flawed) solution that I've found is to store the same number again but without the operator code.
Still hoping to find a better solution. Anyone out there can help us?!?
I use the MagiCall 2.2.4. my operator TIM.
andretrizzo said:
I'm having the same problem with my phone, I'm also a TIM subscriber.
The only (flawed) solution that I've found is to store the same number again but without the operator code.
Still hoping to find a better solution. Anyone out there can help us?!?
Click to expand...
Click to collapse
That's exactly what I'm doing.
Couldn't find Magicall for android. Just WinMo.
My phone operator in Brazil is Vivo and I store all my phone numbers in the following format:
0 + area code + phone number
Because I ommited the operator code, Vivo assumes its default code. This way, the numbers stored in my phone are good for short and long distance calls, and the caller identification also works for SMS and MMS.
I'm not sure that applies to TIM though.
Of course what I suggested is just a workaround. This seems to be a known issue in Android:
http://code.google.com/p/android/issues/detail?id=1673
http://code.google.com/p/android/issues/detail?id=1250
http://groups.google.com/group/android-platform/browse_thread/thread/0e5286ce14aba5b2
You could vote for the issues.
TIM doesn't have a "default" operator service. That's why we have this problem.
I think Claro and VIVO does. As soon as I get out of this contract, I'll migrate to other provider.
I have the same problem here.
You guys found any solution beside switching operators?
Nope.... Right now I'm a very happy vivo user.
However, it seems that the sim card is the one responsible to automatically add an operator number. Every time I call someone without the operator I get this message indicating that the sim card has changed the mumber automatically.
I wonder if we could add an program into TIM's simcards to act like other companies do.
danielmk said:
Nope.... Right now I'm a very happy vivo user.
However, it seems that the sim card is the one responsible to automatically add an operator number. Every time I call someone without the operator I get this message indicating that the sim card has changed the mumber automatically.
I wonder if we could add an program into TIM's simcards to act like other companies do.
Click to expand...
Click to collapse
I installed a program called Right Number.
All my contacs are in the format: 0 + Area code + Number (01191234567)
When you make a call, the program adds the operator number of your like.
And when you receive a call, the phone will recognize the contact.
I recomend!
I have searched for this and found the same question posted in a HD2 Android category, but there were no responses... so asking for myself in here.
I have all my phone numbers listed in my contacts with the preceeding area code, as I often travel outside of the local area and need those area codes included in my contacts numbers..... ie: all my phone numbers are 10 digits in length.
However, there doesn't seem to be a requirement for the area code to be sent, when a caller has Caller-ID enabled. In other words, I receive some calls from contacts in my phone, but if their phone doesn't include the area code in their Caller-ID, then my phone doesn't recognise or identify the number. Consequently, when hanging up from those calls, it constantly asks me if I want to save the number.
Note - it isn't a permanent thing. Many incoming calls DO identify correctly, as the area code has obviously been sent with C-ID.
Does anyone have a solution for this?
Obviously I COULD go thru every contact and manually add another non-area-coded phone number - perhaps under an obscure phonebook entry, like "pager"... but surely this is something that one would expect be handled automatically by the phone... not by duplicating entries as a work-around.
What would happen for business-people who travel internationally - most of their contacts would also include the "+61" (or whichever) country code also.....
Nobody ???
Bumping again ????
Anybody have any clues to this?
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
kawazaki said:
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
Click to expand...
Click to collapse
Thanx mate for your reply.
Sorry took so long.... my phone has been in for warranty repair (unrelated matter to this) for the last 7 weeks, so I haven't logged onto xda in that time !!!
No..... I haven't tried disabling the AC Prefix setting. I will have a look at that and see if it makes any difference.
One additional comment..... I am also having the REVERSE problem.... in that SOME people who ring me on their mobiles, the caller ID is also sending the +61 (Australia) country code in front of their mobile number too.... so again, my phone isn't recognising them as being the "same" number as what is stored in my phonebook ????
Will try the disable thing you mention and report if it works.
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
spinifex74 said:
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
Click to expand...
Click to collapse
Or you could turn off having the phone ask to to add the number to your contacts.
On the US T-Mobile phone it is:
Activate phone screen
Menu
Options
Menu
Network Selection
Advanced tab
Turn off the feature to "Add new phone number to People at end of call"
I'm using the NRG ROM.
Thanks stevedebi.
Sorry - I mite not have been properly clear.
The issue isn't being asked to save a new number.
The issue is.... the phone does not recognise a number - mobile or landline - if there is an area-code or country-code prefixed to the number (or vice versa) with the entry in the phone book.
Eg: ALL my contacts saved in my phone have their mobile numbers WITHOUT the +61 country code.... and ALL landline numbers are saved WITH area-codes.
Now - depending on my contact's phone operators, they sometimes send with, or without, those prefixes in their caller ID's.
Consequently - on those occasions.... my phone does not recognise incoming calls or messages as having come from my contacts, due to the extra numbers at the beginning.
Surely this is a software issue from HTC? I mean, surely the software should be able to query an incoming called ID (either with or without prefixed-codes) with a saved number in the contacts/phonebook (with or without prefixed-codes)... ???
Bumping again ?
Sorry to be repetitive.... still looking for an answer to this ???
Check you registry setting for "HKCU\Control Panel\Phone\CalIidMatch" value=?!?
try to reduce the number for "Value" by 1 and try.
This is for the number of digits your phone will check when comparing incoming numbers with stored names.
Thanx Omar,
Will try that. Question though.... does it check the phone number (by number of digits) in reverse order? ie: setting a particular number will have no effect, if it checks in normal forward order, as it's PREFIXES that are making things wrong.... so the phone needs to ONLY check the LAST 10 digits.... not the first 10. This will eliminate the issue with any country-code added to the front of a number... but will not help with a local area code, as these are dependent on the callers' carrier, if they send the area code in the CID or not
From my experience with my HTC phones, it checks the last digits.
I have number saved with the +974 international code (for Qatar), & when local call come in, they only show the local format (without +974) & the caller ID still recognises the names. Our local numbers are 8 digits, so I have the registry value set at 7 or 8 & it works fine.
I have the following qeustion
My little girl of 6 have her own android phone.
My wife and me put on a location program so when she is out playing, but especially in case of a emergency we can find her.
Now i wonder is it possible that we can put our numbers in it and it are the only phone nr she can call
So meaning that typed nr on the phone keyboard don't work(block the phone keypad)