I tryied to update the Ext ROM, my XDAII, and when finished, I hardreset as guide... My XDAII dead... I cant turn on the XDAII or reach it in anyway., and the display just says "Serial v1.02" all the time..
What can I do now?
Please help me!!!
run the update utility again, after about 5 minutes orso it will start updating again.
Your experience?
Result?
Anyone help me by detail?
Help me!!! Hu...Hu...
Anyone????????
Did you try re running the update utility and waiting for 5 mins like suggested above ?
Thank Itsme and Rob_B
I upgraded succefull.
I have a question: If "Country ID is wrong"???
Related
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
I'm hoping you folks can help me out. I have tried to upgrade my XDA2 using the Himalaya_WM2003SE_Upgrade but it keeps coming up with:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've got:
FCC ID: NM8HIMALAYAS
IMEI : 351938002885560
Now the unit just gets to the bootloader "SERIAL, v1.06" until I put it in the cradle and it goes to "USB, v1.06". I ran the upgrade following the instructions to the letter but no joy! Am I using the incorrect upgrade utility as the error message says or am I missing something? Any help to restore my XDA2 will be gratefully received!!!
Thanks again!!
which rom are you tryin to upgrade to and provided by who ???
regards
jeetz
I'm basically trying to upgrade my O2 PH10B XDA2 to anything that works! It seems whatever I try, it stays on the bootloader screen with either "Serial or USB" on the display depending whether it's in the cradle or not. I can't do anything with it. I've tried to use the "Himalaya_WM2003SE_Upgrade" utility but as I said, it just tells me that this is not corrrect for my device.
HELP!!
Thanks :roll:
try to reset your device and run himalaya upgrade again
I tried it soooo many times but I still get:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've even tried the O2 Xda_II_172181_Final utility but I still get the same thing. Why does it say it is not designed for my device when I have an O2 Himalaya? If anyone can help I will pledge my undying admiration and possibly even lay down my life for them if required! (sorry, that should have read "wife", not life!) :lol:
glt56 said:
I tried it soooo many times but I still get:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've even tried the O2 Xda_II_172181_Final utility but I still get the same thing. Why does it say it is not designed for my device when I have an O2 Himalaya? If anyone can help I will pledge my undying admiration and possibly even lay down my life for them if required! (sorry, that should have read "wife", not life!) :lol:
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=15382&highlight=
try mysterman rom from here dont go for himaupgrade and stuff try to run the setup direct with default radio ....
Success!!!!!
Finally managed to get my XDA2 back to life after some severe CPR & Mouth-to-mouth, and WM2003SEO2UKv2.rar. Thanks for all the suggestions and help.
I also now have a dead M1000.
Where did you get your rom that worked from?
Can you post it please?
Thanks
R
plsssssss help me i also have same problem plsss tell me how u get that pls
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
hi
First:
i hav tried to upgrading my wm5 to wm6 on my atom.
But my upgrading stop a 16% and give me the error the connection between atom and computer can't be done.
I do the reset hard , now i got a screen bootloader with " update utility " and don't hav led on got them only on usb connection connection.
Second:
my activesync don't found my atom again
i hav try brick atom and semi brick but no result.
Someone can help me plz
Try this it might help http://forum.xda-developers.com/showthread.php?t=358442
http://forum.xda-developers.com/showthread.php?p=3909674#post3909674
HERMES (htc tytn) UPGRADE FAILURE
REPORT
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!
i GUESS YOUR BATT IS ALMOST DEAD!
Hi dude... does your batt is higher than 50%? the process will not continue if yuour device is under 50% maybe it is beacause you cant charge it in Bootloader. keep it higher than that... if not the case... i guess you will ned to clean it with mtty....
Just search something like that... im for sure there is a way to make it... use the stripped att rom
AND TRY WITH IT ALWAYS!!!
never but never! when you got a problem in upgrade NEVER do a hardreset.... just softreset... keep it on mind... try an XP machine get it wherever you need to get it!
thanks
..a lot for the reply!
i tried on a XP-PC, because mtty don't work in Vista (Ultimate x64)
i followed ALL the instructions..BUT..
..the problem persists!(
thanks for the idea of battery i will try again, with full of..
also, i will try some ROM's without radio's..hope that help..
BTW:
in mtty shows that the device is CID locked with:
"ORANG008"
i downloaded the last ROM for Orange 008, and tried of install...BUT..nothing!(
any other sugestion, please?
thanks again!