Related
yea i installed custel v2 on my 8525 , it went perfectly fine 100 percent, but then after it finished it just went to bootloader mode, i cant even hold down the power button to turn it off, um the soft reset button works but ive tryed doing a hard reset and soft reset no luck.. any suggestions???
i found the solution to this just in case anyone wants to kno if ur ever in my situation u must download the aku or just dl this http://www.htcamerica.net/support/8525/software-downloads.html
and run it it will install the cingular version i kno i thought it wouldnt work too but i guess it does somehow and then u can do it urself againnn
Reading wiki
http://forum.xda-developers.com/announcement.php?f=306
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
jimtoyz said:
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
Click to expand...
Click to collapse
In my experience, what you describe is very normal . The RUU seems to stop at 80% and again at 95%. So far nothing out of the ordinairy.
But after that the device should start up and reconnect with ActiveSync. When it tries to pair choose "connect without setting up your device" (or something like that, I'm translating from dutch). After that, it should be no problem to run Upgrade.bat from the WM6 ROM of your choice.
For more detailed describtion, read the upgrade guide.
try any of this roms (http://forum.xda-developers.com/showthread.php?t=316062)... maybe you have spl 3.08???
it's not that..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
another possibility
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
It lookslike something is screwed-up... And I agree with you that the cam-buttonis most likely... Succes anyway
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
i think your camera button connection is short (always pressed down) if you get to hard reset screen by only pressing the comm manager button.
hmm...
too bad..yesterday the technician was out of tow..think i'll go there again this afternoon after work..
wish me luck..
NVID Success
I've got the camera button fixed, and i've flashed the NVID rom succesfully!
i'm now in the process of flashing the Transformer 1.0 by Cloudyfa..
All the best to me!
it's done!
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
jimtoyz said:
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
Click to expand...
Click to collapse
CONGRATULATIONS!!
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
You have this info on the Wiki...
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
The Wiki is our friend
Cheers
Press :
Vol Down Button + Center Round Action Key + Reset Hole
> Prompt > Vol Up Button > Finish > Vol Up button.
Hope this help.
Lanyz said:
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
Click to expand...
Click to collapse
Press volume buttons (inferiors) and soft reset at the same time.
When the screen go to about bootloaders still soft reset and "prays".
Bye
Many ppl trying to help
i love this forum...
I just solve it... Thank you for your advices..
Standard hard reset (Vol down + Center button + REset) didn't work - device must be on.
I tried this - Vol down. + Center button and turn on the device, that worked.
Once again thak you.
jcespi2005 said:
Many ppl trying to help
i love this forum...
Click to expand...
Click to collapse
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
hang.tuah said:
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
Click to expand...
Click to collapse
ey man, don't care about it... this is just for fun, you know...
Cheers
i just want to thank everyone who participated and answered this.
i almost ****ted a brick a few min's ago..
my device just stopped working it was real weird.. All was fine then i get a error msg saying that "Gyrator has encounterd an error" and BAM black screen. and no matter how many soft resets and batt pulls nothing worked.
so i immediatly signed on here..searched for about 30 seconds and with the 3 key press..all was good..device booted properly, configured itself, and im back on track.
Thanks,
Jstar
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
scaz24 said:
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
Click to expand...
Click to collapse
You need to get out of the GSM rom forum and go to the raphael CDMA forum. Anything you try to flash from here will not work on your device and my brick it.
http://forum.xda-developers.com/forumdisplay.php?f=465
Until you understand the difference between the two standards you shouldn't be flashing anything, as it will not be safe.
well i m using HP rw 6815, n last night i had flashed a O2 6.5 rom , later i was unsatisfied with tat rom,
so i went 2 change it, n during tat process, my phone turned off, n now it doesnt switch on, 1ce i managed 2 go 2 boot screen thr i cud see hp logo n bl-0.0.0 can ne1 help me out with it, how do i put bootloader in phone.. neither my pc detects the phone... NOW IT DOESNT EVEN TURN ON ... I HAD CHARGED IT COMPLETELY,STILL IT DOESNT TURNS ON. help appriciated
SOME PLEASE HELP
uzi21 said:
well i m using HP rw 6815, n last night i had flashed a O2 6.5 rom , later i was unsatisfied with tat rom,
so i went 2 change it, n during tat process, my phone turned off, n now it doesnt switch on, 1ce i managed 2 go 2 boot screen thr i cud see hp logo n bl-0.0.0 can ne1 help me out with it, how do i put bootloader in phone.. neither my pc detects the phone... NOW IT DOESNT EVEN TURN ON ... I HAD CHARGED IT COMPLETELY,STILL IT DOESNT TURNS ON. help appriciated
SOME PLEASE HELP
Click to expand...
Click to collapse
Firstly copy a rw6815 rom into MiniSD card (like installing a rom).
Put away the battery for 10 minutes. After 10 minutes insert the battery again.
Pres - and - button and the reset button with your stylus. Take the stylus back but continue to press - and - until something changes on the screen. This could be 1 or 2 minutes. After something changes you can release the - and - buttons and then new rom should start to install. After 20 minutes, you can use your rw6815.
Note: If this fails, maybe you need to install the bootloader before the new rom.
Use 68xx Bootloader 1.0.1 => HP_BL1.0.1.rar (instead of 1.0.5)
Good luck.
Hey .. I have a galaxy s2 that changed the rom to Cyanogen mod 9.0 there are already many months, since last week almost every day the phone block and had to eventually take away the battery, now the same thing happened and I had to do the same .. when I turn on said that the only way to have the phone working was doing a factory reset, I canceled to see if there was another solution, or to give back by grace and holy spirit .. from there came the blue screen with the puppet and in minutes the phone turn off .. I took the SIM to put in another phone and the phone turn on no more .. i have tryed hard reset, soft reset, nothing turn the phone on.. Anyone can help me? It's a bit urgent and sad, since it is a "toy" rather expensive ..
thank you
try whit battery out about 1-2 hour and try again.
Can you go into CWM? so you could restore your nandroid backup
calanizzle said:
Can you go into CWM? so you could restore your nandroid backup
Click to expand...
Click to collapse
i put out now the battery, will try it.
what is cwm? (the phone dont turn on, the screen is always off)
i tried sft and hard reset, tried that more than 60 seconds and only the power button too.. i tried with other battery.. nothing happens
Pedrooo90 said:
i put out now the battery, will try it.
what is cwm? (the phone dont turn on, the screen is always off)
i tried sft and hard reset, tried that more than 60 seconds and only the power button too.. i tried with other battery.. nothing happens
Click to expand...
Click to collapse
Cwm(clockworkmod recovery)-vol up+home+power
How did you manage to flash a rom without even knowing what cwm is???
Sent from my Galaxy S2 GT i9100
Did you keep the rom zip file in your phone? or can you connect your phone to a computer?
Hold volume up+home+power to recovery mode, try to re-install the rom or try another rom.
If it's available, you may backup your stuff and wipe data and cache before install the rom.
ocariee said:
Did you keep the rom zip file in your phone? or can you connect your phone to a computer?
Hold volume up+home+power to recovery mode, try to re-install the rom or try another rom.
If it's available, you may backup your stuff and wipe data and cache before install the rom.
Click to expand...
Click to collapse
I did up+home+power, i did down+home+power, nothing happens. I took the battery and put at the end of the afternoon and nothing happens.. i tried with another battery and nothing happens.. i have cleaned the usb and nothing happens..
Try a USB jig. Otherwise JTAG.
Sent from my GT-I9100 using Tapatalk 2
Pedrooo90 said:
Hey .. I have a galaxy s2 that changed the rom to Cyanogen mod 9.0 there are already many months, since last week almost every day the phone block and had to eventually take away the battery, now the same thing happened and I had to do the same .. when I turn on said that the only way to have the phone working was doing a factory reset, I canceled to see if there was another solution, or to give back by grace and holy spirit .. from there came the blue screen with the puppet and in minutes the phone turn off .. I took the SIM to put in another phone and the phone turn on no more .. i have tryed hard reset, soft reset, nothing turn the phone on.. Anyone can help me? It's a bit urgent and sad, since it is a "toy" rather expensive ..
thank you
Click to expand...
Click to collapse
try using a usb jig and chk if its getting to download mode
if not then
put it on chargin and chk if the area below camera is getting hot
if it is getting hot then its confirmed that u have bricked ur phone
if u have it in warranty claim it make sure u don tell them wat u did