How to upgrade Xda II with Bootloader 1.06 and ExtROM 1.66.165 to ROM 1.72.00 with 1.72.104 ExtROM?
I've tried to start the himaupgrade.ut without format the ROM. It's didn't work. i've also tried to format the ROM before, then try to upgrade via bootloader 1.06. It didnt work again! Why? Anyone can help me?
Rom Edit
firstly modify the rom and change the operator to O2 using er2003edit, which can be found on this forum. then try n upgrade.
one thing i would like to know where did u get the 1.06 version of bootloader was it already installed on your device or u have installed it, if u have then pls provide me the link as well.
thanks
jeet
I also have 1.06 bootloader. People said the once U upgrade, there's no way U can Downgrade it again. Is it true? Coz I just d/l 1.72.126 from iMate and I want to upgrade mine.
ROM ver 1.66.00WWE
ROM date 02/20/04
Radio ver 1.08.00
Protocol 1337.18
ExtROM ver 1.66.165
Upragding Rom
hey adbradwell
firstly download er2003edit, install it.
step1. Extract your rom 1.72 to a folder.
step2. now u will see 6 files, the files which need to be edited are ms_.nba, NK.nba, Radio_.nba.
step3. now open these files one by one and change the operator from T Mobile to O2. It will ask u password for each file, the password is as follows:
NK.nbf NK.nba password = 0x20040304
ms_.nbf ms_.nba password = 0x20040305
Radio_.nbf Radio_.nba password = 0x20040306
Step4. Edit all the three, dont change anything else and save it.
Step5. now run HimaUpgradeUt.exe.
Step6. It will start upgrading, it will take 1-2 minutes to start and the whole process will take around 1 hour.
thats it ur done.
enjoy
jeet
Re: Rom Edit
jeet said:
firstly modify the rom and change the operator to O2 using er2003edit, which can be found on this forum. then try n upgrade.
one thing i would like to know where did u get the 1.06 version of bootloader was it already installed on your device or u have installed it, if u have then pls provide me the link as well.
thanks
jeet
Click to expand...
Click to collapse
It's already installed on my device.
I thought i've tried that way. (Changing the operator to O2). But it didn't start at all! Have you try it by yourself?
Re: Upragding Rom
jeet said:
hey adbradwell
firstly download er2003edit, install it.
step1. Extract your rom 1.72 to a folder.
step2. now u will see 6 files, the files which need to be edited are ms_.nba, NK.nba, Radio_.nba.
step3. now open these files one by one and change the operator from T Mobile to O2. It will ask u password for each file, the password is as follows:
NK.nbf NK.nba password = 0x20040304
ms_.nbf ms_.nba password = 0x20040305
Radio_.nbf Radio_.nba password = 0x20040306
Step4. Edit all the three, dont change anything else and save it.
Step5. now run HimaUpgradeUt.exe.
Step6. It will start upgrading, it will take 1-2 minutes to start and the whole process will take around 1 hour.
thats it ur done.
enjoy
jeet
Click to expand...
Click to collapse
Niki, Have U tried this way before? Coz I might upgrade it on our 5th gathering. I need expert help.
I'm trying now. Hopefully working out!
currently using imate's 1.72 rom
yes i m currently using imates latest rom 1.72 it is working perfectly fine. u can try another way, press three buttons at the sme time.
1. press & hold the navigation button
2. press the power button & hold,
3. Now hardreset ur device.
it will take u to the bootloader mode, now connect ur to ur pc & run himalya.exe.
thats it.
Yihhaaa....... I've made it!
1 question. Is it safe if i wanna back to any ROM? Which ROM suiteable with 1.06 Bootloader?
Related
Hi everyone I've had an XDA2 since Friday and have recently tried to upload a custom extended rom which I made from the original ms_.nbf provided on the o2 website. I have used er2003edit to edit the original rom and then used the provided HimaUpgradeUt.exe (0.9.1.0) to upload the rom. The rom uploads to 100% waits about 15 seconds and then just dissapears from my computer screen and the XDA2 is left blank. I then reset the XDA2 and am stuck in boot mode.
Does any one know if what I am trying to do is impossible, or if I am doing something wrong?
Any help would be appreciated.
Regards, Russ
I have since been able to use my custom Extended Rom with modified cabs by using HimaUpgradeUt.exe to flash the Nk.nbf, ms_.nbf and Radio.nbf in one process.
So it appears that you cannot flash extended rom on its own? Surely you dont have to flash all roms just to get your custom ms_.nbf rom to work?
i could hack Radio rom from Cinglar,and make Flashable file.
2 of them,,Version 1.10 and 1.16 were tested on my VarioII.
i tried to upload them onto xda-FTP many times but fialed.
so i uploaded to my FTP for you guys.
instruction of upgrade also there.
Please got to get them if you interested in.
http://asukal.net/blog/2006/09/radio_upgrade_hermes_form_cing.html
Good luck
Asukaly yours!
WTF! This is _VERY_ good news!! :shock:
How did you manage to cook the type 2 radio rom??
Is Ma_Upgrade_NoID working with the hermes bootloader?? AFAIK the bootloader lacks wdata command... (replaced by 'wdatah')
Is it that you need only rwdata but not wdata to flash radio?
An explanation of the process to create the working nbf out of the extracted .nb files would be very useful!
Thanks!!
EDIT: I uploaded the files to xda-dev FTP and make a new wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thanks for the new Radio update. Just updated my MDA Vario II. Will test if there's any improvements!
Seems to work like a charm!
ROM 1.18.255.3
ROM date: 07/22/06
Protocol version: 32.53.7018.01H
Ext ROM 1.18.255.106
Radio 1.16.00.00
And my Bootloader remains at V1.04 :!:
(I'd have pasted a bitmap, but I couldn't figure out how!).
Major kudos to Asukal!!!!!!!
Now if we could only find a new TyTN System ROM to go along with this spiffy new radio...
super Asukal, great news!!!
about the screen alignment problem, if you have some free time, could you please translate whats is the problem and how they do to fix the screen alignment problem please
http://inuchanbt.blog54.fc2.com/blog-entry-86.html
thanks you so much Asukal!
I am receiving country id error : 120 while attempting to upgrade the radio from Cingular 1.31 ( radio 1.13). Even when i ran the upgrade second time device seems to go into radio update screen but just sits there and doing nothing.
then the radio updare error comes up. following the soft reset I have checked device information and radio version is still: 1.13
device is HTC TyTN, originally shipped with Italian ROM.
any ideas?
@superduper: I guess you need a 1.04 bootloader to perform the radio only rom upgrade from Asukal, but your current rom has bootloader 1.06
Let's see if anyone else with Cingular 1.31 rom can do the radio only upgrade or has the same problem you reported...
@Asukal: please give us details on how you did to extract the "radio_.nbf" from shipped Hermimg Cingular NBH file
this is super excellent. Now all we need is a rom image update then we can make our own aku 3.2 version.
Good job Asukal.
vua777 said:
super Asukal, great news!!!
about the screen alignment problem, if you have some free time, could you please translate whats is the problem and how they do to fix the screen alignment problem please
http://inuchanbt.blog54.fc2.com/blog-entry-86.html
thanks you so much Asukal!
Click to expand...
Click to collapse
he did ...pls see a picture
Summary to extract and convert nbh, pls wait a while.
i will make report after finish all my project of this,
now i am trying to flash Only Splash, and only OS, only Extrom separately.
PLS patient!
and thanks report guys!.
if no_id_upgrade can not work on Bootloader 1.06,
can u try with Hermes Upgrade.exe with this nbf?
(you must remove nbh before that, i didnt try that so i am not sure it work or not) :?
thanks a lot Asukal!!!
no luck. file open error : 240 :?
Asukal said:
if no_id_upgrade can not work on Bootloader 1.06,
can u try with Hermes Upgrade.exe with this nbf?
(you must remove nbh before that, i didnt try that so i am not sure it work or not) :?
Click to expand...
Click to collapse
Is it any better?
So, a question for those of you who've done the upgrade - does it make any difference you can notice? Just wondering if it's worth doing the upgrade at the moment, or waiting for new HTC rom when it finally appears.
Tried this on a Orange M3100 with the 1.31 Cingular ROM, but it doesn work. Just sites at 0% and then you eventually get an error. Seems like you need bootloader 1.04 for this to work...
are there any improvements using these new radio roms? also, what's the difference between 1.10 and 1.16?
thanks
I wasn't having any radio problems previously, and so far, I haven't seen any issues with 1.16, either.
Bluetooth works fine, UMTS/GSM calls work fine, WLAN works fine, and UMTS data works fine...
If I see any strange behaviors, I'll be sure to point them out...
Asukal said:
Summary to extract and convert nbh, pls wait a while.
i will make report after finish all my project of this,
now i am trying to flash Only Splash, and only OS, only Extrom separately.
PLS patient!
Click to expand...
Click to collapse
Aaaaghhh! I can't wait
Please tell me if this process is correct to create the radio_.nbf:
Code:
nbh2dbh.pl HERMIMG.nbh HERMIMG.dbh
dbhdecode.pl HERMIMG.dbh
alpinenbfdecode.pl -e ./GSM.nb radio_.nbf
My radio_.nbf and yours differ, is it because of headers?
Thanks!
Just tried the procedure on mine.
Hardware = Dopod 838Pro
ROM = imate
Upgraded to radio version 1.16, the procedure worked fine! Except that after the flashing was complete the PC displayed "upgrade failed" but after a soft reset of the PDA, it worked.
You did a great job, Asukal!!!
I can see some improvement that I can see more wireless bar on my title bar after I upgrade radio ROM.
Thsi is cingular ROM, so I don't know somebody who lives outside US can see this improvement, but I can see it in my rural US state.
In addition, as you said, I can see OS runs smoothly than my original ROM.
I was usually stuck when I run "menu" or "button" applet in control panet. But after I upgrade to Radio 1.16, I don't have it.
I don't know why, but it is real.
I appreciate your effot!!
works great, thanks..
guys who can not flash Radio
One of my friends try to flash 1.16.and faild in that.
But could flash 1.11.
then tried 1.16 again, finally he could flash 1.16.
Please try this step.<this is not to guarantee can do, just a possibility>
And i will prepare 1.13 also soon.
Ok... now this is going to be a work in progress and an answer to most questions...
To all pof, Des and Sleuth have done a great job in getting the tools together so we can flash our devices...
1. To all who want to SuperCID your device no matter what ROM version you have and no matter what Radio BootLoader version you have you can use POF's version 3 unlocker found here http://pof.eslack.org/hermes-unlocker/
2. Once you have SuperCID your device you can now load extracted ExtRom, OS, and radio roms (radio can only be done if you have radio bootloader 107 or less) to do this goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
3. For all of those not interested in ROM cooking and flashing cooked ExtROM's all you need to use is des's SSPL tool... just copy it onto your device and run it... the SPL version should say SPL-1.09.des. The tool can be found here http://forum.xda-developers.com/showthread.php?t=293651
4. Just to clarify... once you have flashed radio bootloader 108 onto your device it is possible to do Extracted Radio only upgrades please read edit 3 below..... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
5. if your device is unusable please refer to here http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
appologies for all the links but thats what the wiki is for guys... lots of reading but it is all worth while in the end...
and if ive missed anything feel free to add...
edit 1... The reason you SuperCID your device is to enable flashing of any SPL Bootloader versions, extracted OS roms, extracted ExtROM's and to an extent Radio ROM's (only if your device has RadioBootloader 107 or less).... but SuperCIDing your device voids the warranty... if your just looking to upgrade your device to a newer ROM and are worried about the warranty just use des's SSPL tool... read point 3 above...
edit 2... the SSPL tool... you need to copy this onto your device while windows mobile is running... if your device is not in a usable state refer to point 5... once its finished copying click on the exe and run it... it will put your device into a 'Service' mode and with bootloader versions IPL-SSPL by Des and SPL-1.09.ds... all you need to do now is choose which shipped original rom you want to use to flash your device with... see here for options http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Dead Tytn
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
jash431 said:
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
Click to expand...
Click to collapse
you need to boot it into Windows Mobile... can you do this?
walshieau said:
you need to boot it into Windows Mobile... can you do this?
Click to expand...
Click to collapse
I thought step 5 covered this.
wpbear said:
I thought step 5 covered this.
Click to expand...
Click to collapse
but he didnt read step 5... i hadnt added that bit yet
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Please Answer if you are sure
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ME TOO...
IF have one NEW VERSION with "SSPL",use Micro sd /RUU ,maybe can help me and you to reflash it ...
walshieau
BIG THANKZzz for this information...
simple said:
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Click to expand...
Click to collapse
1. If you have radio bootloader 108 you cannot downgrade it...
2. Yes its true but that still wont downgrade your radio bootloader.. it will just downgrade your radio, os and extended rom
3. yes that is correct
4. current limitations read this... http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ok now you have to open an mtty session... download this ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
1. Disable 'Allow USB Connections' in Activesync
2. Open mtty.exe
3. type \\.\WCEUSBSH001 in the port section and click ok
4. press 'Enter' twice and type task 32 and press enter
4. type info 2 and tell me what is displayed...
What about writing an app which fully identifies all Hermes specs? It should open a message box and answer whether device is SuperCID, which IPL, SPL, RBL, ROM, Radio and if readable which ExtROM. Wouldn't that be nice? Every noob could give all the information viable for all others to help.
well if the user was to go and look at the device information application in 'Settings' > System then can find out what radio rom version they have when in turn if they look at the table in the wiki they can tell what version of Radio Bootloader they have... but i will investigate writing a little app... shouldnt be too hard...
walshieau said:
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Click to expand...
Click to collapse
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
wpbear said:
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
Click to expand...
Click to collapse
1. i havent tried that... what is the point??
2. yes that is correct...
dead tytn jash431
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
jash431 said:
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
Click to expand...
Click to collapse
check your pm
Hi Walshieau,
After I follow your edit 3 step, when I try to upgrade the radio,
it shown Error 262. What's that error message for?
Thanks
did you copy SSPL to your device and run it before you started the upgrade???
Am I right in thinking I could mix and match all the components with this tool?
I.E. extract the o.s. from one full update then extract the radio from another, then use "NBF generator" to merge them and flash them all at once?
Hi all..
First thanx to all for your favor..
and i have K-jam G4 and i need to install windows mobile 6..
i have some trouble with use the tools..!!
i try to use Shelltool and i fail..!
PLEASE i need someone tell me what i have to do.. step by step !
i know thats i have alot of requests.. but really i dont have another way.. i tried to search the solution in this forum but i didnt understand anything..!!!
ps. i never change the ROM that installed on the PDA since i bought it so iam not professional in this softwares.. i can just do the steps..
Thanx..
My PDA Info.
ROM version: 2.16.9.1 WWE
Radio version: 02.07.10
ExtROM version: 2.16.9102
IPL: 2.16.0001
SPL: 2.16.0001
OS: 2.16.9.1
7iSH said:
Hi all..
First thanx to all for your favor..
and i have K-jam G4 and i need to install windows mobile 6..
i have some trouble with use the tools..!!
i try to use Shelltool and i fail..!
PLEASE i need someone tell me what i have to do.. step by step !
i know thats i have alot of requests.. but really i dont have another way.. i tried to search the solution in this forum but i didnt understand anything..!!!
ps. i never change the ROM that installed on the PDA since i bought it so iam not professional in this softwares.. i can just do the steps..
Thanx..
My PDA Info.
ROM version: 2.16.9.1 WWE
Radio version: 02.07.10
ExtROM version: 2.16.9102
IPL: 2.16.0001
SPL: 2.16.0001
OS: 2.16.9.1
Click to expand...
Click to collapse
when you say trouble what do you mean
if you have the shell tool allready then you have the instructions on how to flash you device what part of the instructions are you stuck on
i have used the shell tool countless times so should be able to help
many thanx for reply..
1. i am not understanding how to download the ROM (in the device or PC)
i have that ROM: Wizard_MB_1010811_21911 i think it is WM6
2. nk.nbf from where can i get it..!?
3. i connect my device with activesync and setup Cert_SPCS.cab & EnableRapi.cab to the main memory and reboot it.
4. when i click on Get ROM info i didnt get any information, (please check the attachment)
i wish u help me, and sorry for my spelling..
thanx..
7iSH said:
many thanx for reply..
1. i am not understanding how to download the ROM (in the device or PC)
i have that ROM: Wizard_MB_1010811_21911 i think it is WM6
2. nk.nbf from where can i get it..!?
Click to expand...
Click to collapse
The nk.nbf file is located INSIDE the Wizard_MB_1010811_21911 file you downloaded. Instead of just running the Wizard_MB_1010811_21911 program file, use winrar to UNCOMPRESS the contents somewhere onto your computer. After uncompressing the contents into a folder on your computer, you will see the nk.nbf file in the folder you just created. Just copy that nk.nbf file into the shelltool folder and run shelltool. then proceed with instructions to extract OS and Flash it to your device.
you need to extract the files by using a program i use this one zip genius link provided
http://www.zipgenius.it/eng/?page_id=12
once extracted you can find the file you need copy and past that file into the shell tool dir
it will then find it and you will be able to flash your rom
the best rom i have used so far is the wi6ard test rom wm6 you can find here http://rapidshare.com/users/IW25NT along with loads of other roms
looks like we both answered the question at the same time guinness got there 2 minutes earlier
THAAAANKS dear...
many thanx to you easymob and Guinness...
Now i have WM6 and its very nice..
Thanx to you again..
I'm glad we could help! Keep us posted on how it works for you!
I'm a noob with Mobile PC.. so Please explain the "shelltool folder" I have connected my device via activesync and browse the folders and files on my phone.. but I don;t see the shelltool folder..
I have a Cingular 8125 pda cell phine and I would like to update to WM 6. Please help
Thanks in advance!
hi there,
I can see that you have IPL & SPL 2.21.
I have faria WM6 on my G4 device but it showes 2.18.001
And my batery is draining much faster than with MOLSKI 3.0.0. ROM
Is there any solution to it or not.
i have read n search from this forum for this problem but not at my real point.
i have done flashing my X01HT softbank with this thread
but the rom ver. JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
i use NBHtool to make my own
1.IPL.nb,SPL.nd and RAdio rom i take from HTC_Hermes_SIM_CID_Unlock_v3a (HermesUnlocker_v3a.nbh)
2. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom(i used up there)
3.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10)
(Or is that i make a wrong?)
all look normal after flashing (the signal show up and all the program) but the problem is i can not still make a call.
The reason i flash it was the original in japanese and it was lock (asking password like that). I don't know japanese at all.
Oh ya,i'm from Indonesia,before this problem appear i use it normal with my gsm card (My region card)
I dont why a few week ago this problem came by him self.
Note: I haven't ever flash it before yet.
so this is the 1st time.
The radio rom before flash still ver.1.14.00.10
after flash (u know lah ver.1.16.00.00 --> HermesUnlocker_v3a)
can anyone help me?
ups i'm forgot
from this thread http://forum.xda-developers.com/showthread.php?t=281617&highlight=X01HT+rom+english+version
Or this is the other lock mode?
the first lock i have got was asking a password bar screen.
but sometimes u could see the desktop but only 2-10 sec appear then screen lock with password again.
after flash,hadn't shown that.very normal.The signal appear normally.
but i just couldn't make a call.
it said "operation fail" or
"can't complete the call.The signal maybe unaviable or the phone number maybe not valid.Verify the number or try again later".
and so was like that if i sent a sms.
just that.So...can i say that still lock?
How to solve that?
DONE. horeeeeee.....Success,i did it!!!!
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
Make a question n answer it by my self....hahahaha.....
Just for share expreriance bro....
wuahhh lucky you
i have two x01ht one before and the other one post April
unlocked one but another one still cant unlock
pls contact me if you have any idea to unlock it
want to try imei check
but paypal is just pain in the ass
especially for indonesian like us
learnig said:
Note: I haven't ever flash it before yet.
so this is the 1st time.
The radio rom before flash still ver.1.14.00.10
after flash (u know lah ver.1.16.00.00 --> HermesUnlocker_v3a)
Click to expand...
Click to collapse
i just expreriance softbank x01ht the radio rom 1.14.00.10 (before run HermesUnlocker_V3a). and after run HermesUnlocker_V3a the radio rom changed to 1.16.00.00.
Unlocked done!!! Thanks Pof.
But the problem is... i bought another x01ht with radio rom 1.46, how to change to radio rom 1.14 or 1.16? i want to change the radio rom to 1.14 or 1.16 because i think with radio rom 1.14 we can unlock x01ht with HermesUnlocker_V3a.
does anyone know where i can download radio rom 1.14 and 1.16?
i was tried to searching in forum and i got it, but when i installed the radio rom can not be changed from 1.46 to 1.14 or 1.16
thanks and regards,
b.