Related
How to upgrade Xda II with Bootloader 1.06 and ExtROM 1.66.165 to ROM 1.72.00 with 1.72.104 ExtROM?
I've tried to start the himaupgrade.ut without format the ROM. It's didn't work. i've also tried to format the ROM before, then try to upgrade via bootloader 1.06. It didnt work again! Why? Anyone can help me?
Rom Edit
firstly modify the rom and change the operator to O2 using er2003edit, which can be found on this forum. then try n upgrade.
one thing i would like to know where did u get the 1.06 version of bootloader was it already installed on your device or u have installed it, if u have then pls provide me the link as well.
thanks
jeet
I also have 1.06 bootloader. People said the once U upgrade, there's no way U can Downgrade it again. Is it true? Coz I just d/l 1.72.126 from iMate and I want to upgrade mine.
ROM ver 1.66.00WWE
ROM date 02/20/04
Radio ver 1.08.00
Protocol 1337.18
ExtROM ver 1.66.165
Upragding Rom
hey adbradwell
firstly download er2003edit, install it.
step1. Extract your rom 1.72 to a folder.
step2. now u will see 6 files, the files which need to be edited are ms_.nba, NK.nba, Radio_.nba.
step3. now open these files one by one and change the operator from T Mobile to O2. It will ask u password for each file, the password is as follows:
NK.nbf NK.nba password = 0x20040304
ms_.nbf ms_.nba password = 0x20040305
Radio_.nbf Radio_.nba password = 0x20040306
Step4. Edit all the three, dont change anything else and save it.
Step5. now run HimaUpgradeUt.exe.
Step6. It will start upgrading, it will take 1-2 minutes to start and the whole process will take around 1 hour.
thats it ur done.
enjoy
jeet
Re: Rom Edit
jeet said:
firstly modify the rom and change the operator to O2 using er2003edit, which can be found on this forum. then try n upgrade.
one thing i would like to know where did u get the 1.06 version of bootloader was it already installed on your device or u have installed it, if u have then pls provide me the link as well.
thanks
jeet
Click to expand...
Click to collapse
It's already installed on my device.
I thought i've tried that way. (Changing the operator to O2). But it didn't start at all! Have you try it by yourself?
Re: Upragding Rom
jeet said:
hey adbradwell
firstly download er2003edit, install it.
step1. Extract your rom 1.72 to a folder.
step2. now u will see 6 files, the files which need to be edited are ms_.nba, NK.nba, Radio_.nba.
step3. now open these files one by one and change the operator from T Mobile to O2. It will ask u password for each file, the password is as follows:
NK.nbf NK.nba password = 0x20040304
ms_.nbf ms_.nba password = 0x20040305
Radio_.nbf Radio_.nba password = 0x20040306
Step4. Edit all the three, dont change anything else and save it.
Step5. now run HimaUpgradeUt.exe.
Step6. It will start upgrading, it will take 1-2 minutes to start and the whole process will take around 1 hour.
thats it ur done.
enjoy
jeet
Click to expand...
Click to collapse
Niki, Have U tried this way before? Coz I might upgrade it on our 5th gathering. I need expert help.
I'm trying now. Hopefully working out!
currently using imate's 1.72 rom
yes i m currently using imates latest rom 1.72 it is working perfectly fine. u can try another way, press three buttons at the sme time.
1. press & hold the navigation button
2. press the power button & hold,
3. Now hardreset ur device.
it will take u to the bootloader mode, now connect ur to ur pc & run himalya.exe.
thats it.
Yihhaaa....... I've made it!
1 question. Is it safe if i wanna back to any ROM? Which ROM suiteable with 1.06 Bootloader?
Ok... now this is going to be a work in progress and an answer to most questions...
To all pof, Des and Sleuth have done a great job in getting the tools together so we can flash our devices...
1. To all who want to SuperCID your device no matter what ROM version you have and no matter what Radio BootLoader version you have you can use POF's version 3 unlocker found here http://pof.eslack.org/hermes-unlocker/
2. Once you have SuperCID your device you can now load extracted ExtRom, OS, and radio roms (radio can only be done if you have radio bootloader 107 or less) to do this goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
3. For all of those not interested in ROM cooking and flashing cooked ExtROM's all you need to use is des's SSPL tool... just copy it onto your device and run it... the SPL version should say SPL-1.09.des. The tool can be found here http://forum.xda-developers.com/showthread.php?t=293651
4. Just to clarify... once you have flashed radio bootloader 108 onto your device it is possible to do Extracted Radio only upgrades please read edit 3 below..... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
5. if your device is unusable please refer to here http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
appologies for all the links but thats what the wiki is for guys... lots of reading but it is all worth while in the end...
and if ive missed anything feel free to add...
edit 1... The reason you SuperCID your device is to enable flashing of any SPL Bootloader versions, extracted OS roms, extracted ExtROM's and to an extent Radio ROM's (only if your device has RadioBootloader 107 or less).... but SuperCIDing your device voids the warranty... if your just looking to upgrade your device to a newer ROM and are worried about the warranty just use des's SSPL tool... read point 3 above...
edit 2... the SSPL tool... you need to copy this onto your device while windows mobile is running... if your device is not in a usable state refer to point 5... once its finished copying click on the exe and run it... it will put your device into a 'Service' mode and with bootloader versions IPL-SSPL by Des and SPL-1.09.ds... all you need to do now is choose which shipped original rom you want to use to flash your device with... see here for options http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Dead Tytn
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
jash431 said:
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
Click to expand...
Click to collapse
you need to boot it into Windows Mobile... can you do this?
walshieau said:
you need to boot it into Windows Mobile... can you do this?
Click to expand...
Click to collapse
I thought step 5 covered this.
wpbear said:
I thought step 5 covered this.
Click to expand...
Click to collapse
but he didnt read step 5... i hadnt added that bit yet
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Please Answer if you are sure
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ME TOO...
IF have one NEW VERSION with "SSPL",use Micro sd /RUU ,maybe can help me and you to reflash it ...
walshieau
BIG THANKZzz for this information...
simple said:
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Click to expand...
Click to collapse
1. If you have radio bootloader 108 you cannot downgrade it...
2. Yes its true but that still wont downgrade your radio bootloader.. it will just downgrade your radio, os and extended rom
3. yes that is correct
4. current limitations read this... http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ok now you have to open an mtty session... download this ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
1. Disable 'Allow USB Connections' in Activesync
2. Open mtty.exe
3. type \\.\WCEUSBSH001 in the port section and click ok
4. press 'Enter' twice and type task 32 and press enter
4. type info 2 and tell me what is displayed...
What about writing an app which fully identifies all Hermes specs? It should open a message box and answer whether device is SuperCID, which IPL, SPL, RBL, ROM, Radio and if readable which ExtROM. Wouldn't that be nice? Every noob could give all the information viable for all others to help.
well if the user was to go and look at the device information application in 'Settings' > System then can find out what radio rom version they have when in turn if they look at the table in the wiki they can tell what version of Radio Bootloader they have... but i will investigate writing a little app... shouldnt be too hard...
walshieau said:
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Click to expand...
Click to collapse
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
wpbear said:
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
Click to expand...
Click to collapse
1. i havent tried that... what is the point??
2. yes that is correct...
dead tytn jash431
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
jash431 said:
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
Click to expand...
Click to collapse
check your pm
Hi Walshieau,
After I follow your edit 3 step, when I try to upgrade the radio,
it shown Error 262. What's that error message for?
Thanks
did you copy SSPL to your device and run it before you started the upgrade???
Am I right in thinking I could mix and match all the components with this tool?
I.E. extract the o.s. from one full update then extract the radio from another, then use "NBF generator" to merge them and flash them all at once?
I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.
i would like to downgrade to WM5 official ROM,
i got one from this link http://www.tm-phonedownloads.com/dow...mda_vario.html
but this is not safe for G4 device coz it bricked someonesfone in G4 forum..
where can i have a safe base ROM for my G4 device, the one that wont harm my IPL/SPL so that i could downgrade back to WM5...
thanks.
rizortiz
rizortiz said:
i would like to downgrade to WM5 official ROM,
i got one from this link http://www.tm-phonedownloads.com/dow...mda_vario.html
but this is not safe for G4 device coz it bricked someonesfone in G4 forum..
where can i have a safe base ROM for my G4 device, the one that wont harm my IPL/SPL so that i could downgrade back to WM5...
thanks.
rizortiz
Click to expand...
Click to collapse
If you had read carefully, you would have known that that rom didn't brick his device.
He HAD that ROM but then decided to flash an older ROM which didn't contain the G4 IPL/SPL, thus bricking his device by flashing G3 IPL/SPL.
another question..
the-equinoxe said:
If you had read carefully, you would have known that that rom didn't brick his device.
He HAD that ROM but then decided to flash an older ROM which didn't contain the G4 IPL/SPL, thus bricking his device by flashing G3 IPL/SPL.
Click to expand...
Click to collapse
but this was what he said before..
[QUOTE ]
Originally Posted by Krzycho_666
I had RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Shi p on board (the newest ROM from T-Mobile.co.uk).
I have got black sceen, power, bootloader, and hard reset doesn't works.... When I plug USB cable to my PC LEDs wont light... [/QUOTE]
you mean that official ROM from is safe to be flashed with my wizard?
is that official ROM wont change my IPL/SPL? does it only contain OS?
thanks.
rizortiz
Officiall ROM of your provider is safe to flash in normal way...
Fro example I have CID locked G4 MDA Vario from T-Mobile CZ so I can flash T-Mobile CZ ROM without any problems in a normal way (without SoftSPL, shelltools etc. - just normally).
In fact I do this before every flashing of a custom WM6 ROM
Mirek
@rizortiz:
he excactly said:
I had RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Shi p on board (the newest ROM from T-Mobile.co.uk).
I have got black sceen, power, bootloader, and hard reset doesn't works.... When I plug USB cable to my PC LEDs wont light...
I tried to flash RUU_Prodigy_1060204_105_11210_TMO_UK_Ship to unlock CID.... I used SoftSPL-V0.1 to make it. But there is one thing more... Whe I tried to use SoftSPL-V0.1 RUU didn't want to connect my phone... SO I've disconnected phone and restarted PC (screen was still white). Then RUU "saw" my phne and my phone seamed to be upgraded.... Instalation was complete and there was a bootloader on the screen with information about IPL/SPL - but IPL was different then SPL. IPL was 1.06 and SPL was 2.21.olip (that was ok... - am I right?? )... I tried to shot it down.... and.... my device don't want to startup!!!! IS there any rescue for my machine???
Click to expand...
Click to collapse
ahh, why am I even defending what I said..
BTW,
Why try flashing a stock ROM with sSPL?
you can flash an original stock rom to your cid-locked device without sSPL.
Sad but true, if you flash a G4 unsafe rom thats it, your device is bricked. Equinoxe made a perfect softspl in my opinion and if other users dont take the time to read what he says and bricks their device its on their head, not his.
okay..
so i thought it was the first ROM that he installed that bricked his device..
because hardreset, soft reset and bootloader not working anymore..
well anyway, do you mean to say it would be safe to flash
that ROM (the latest from t-mobile) to my t-mobile?
does it not contain IPL/SPL?
how will i check it so that it wont brick my device? thanks.
rizortiz
rizortiz said:
okay..
so i thought it was the first ROM that he installed that bricked his device..
because hardreset, soft reset and bootloader not working anymore..
well anyway, do you mean to say it would be safe to flash
that ROM (the latest from t-mobile) to my t-mobile?
does it not contain IPL/SPL?
how will i check it so that it wont brick my device? thanks.
rizortiz
Click to expand...
Click to collapse
you can use Typho5, http://www.savefile.com/files/1066484
Please follow these steps to the dot.
1. Extract typo 5 to root. "c:\typho5\
2. Copy the nk.nbf file of your os to c:\typho5\
3. Go to command prompt and type "cd\" "cd typho5" "typho5 -x nk.nbf
4. You will see the info in the command prompt regarding the os you want to flash. Please delete all files afterwards except typho5.exe and nk.nbf.
Please tell us your ipl/spl first. Softspl is G4 only.
yeah...
saa044 said:
Please follow these steps to the dot.
1. Extract typo 5 to root. "c:\typho5\
2. Copy the nk.nbf file of your os to c:\typho5\
3. Go to command prompt and type "cd\" "cd typho5" "typho5 -x nk.nbf
4. You will see the info in the command prompt regarding the os you want to flash. Please delete all files afterwards except typho5.exe and nk.nbf.
helloo..
i already did what u said..
i had these files..
80040000-OS.nb
92000000-Splash.nb
96000000-GSM.nb ----------> does it mean, it will change my radio version?
9b000000-Extension.nb
9d000000-HTC.nb
where is that IPL/SPL? how will i knw it wont change my IPL/SPL?
i already used sSPL with TNT 5.0, thanks to equinoxe tool for that..
i already have WM6 on my fone..
i just want to downgrade to WM5, i am afraid if these WM5 roms including wizard love rom contains new IPL/SPL that could brick my fone..
currently, i have IPL/SPL of 2.26.0001 so its a G4.
thanks.
rizortiz
Click to expand...
Click to collapse
Click to expand...
Click to collapse
rizortiz said:
saa044 said:
Please follow these steps to the dot.
1. Extract typo 5 to root. "c:\typho5\
2. Copy the nk.nbf file of your os to c:\typho5\
3. Go to command prompt and type "cd\" "cd typho5" "typho5 -x nk.nbf
4. You will see the info in the command prompt regarding the os you want to flash. Please delete all files afterwards except typho5.exe and nk.nbf.
helloo..
i already did what u said..
i had these files..
80040000-OS.nb
92000000-Splash.nb
96000000-GSM.nb ----------> does it mean, it will change my radio version?
9b000000-Extension.nb
9d000000-HTC.nb
where is that IPL/SPL? how will i knw it wont change my IPL/SPL?
i already used sSPL with TNT 5.0, thanks to equinoxe tool for that..
i already have WM6 on my fone..
i just want to downgrade to WM5, i am afraid if these WM5 roms including wizard love rom contains new IPL/SPL that could brick my fone..
currently, i have IPL/SPL of 2.26.0001 so its a G4.
thanks.
rizortiz
Click to expand...
Click to collapse
Dude its hard to keep track when you are working "me" and discussing the same thing on this thred also Read my reply on the other thred. http://forum.xda-developers.com/showthread.php?p=1522298#post1522298 And also I would recommend downgrading to your official wm5 rom, if you know it is safe and have done it before.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
pls help me-- kjam
Hi ,I have a kjam which is dead now. I have bootloader in 3color and also detect usb but I couldent downgrade and uograde . pls direct me and interduce some linke which shows the suitable rom and the software which I can flashing my rom or doing best like hspl or sspl without activesynce connectivity.
kjam wizard g4 series ending with 0001
tnx olot
I am waiting for your early replay
kourosh
Good Morning,
- on my Jamin I've installed HardSpl (operation all ok)...
- after I've installed Throttle Diamond I Multilanguage ITA (operation all ok)...
- but when flashing is termined the jamin was "off" and after automaticaly "on"
but after was blocked on "3 color bootup"...
- so, after I've re-installed HardSpl (operation all ok)...
- when operation in termined the jamin was "off" and after automaticaly "on"
but after, and now, is blocked on first screen "i-mate" where are the
follows number: IPL 2.13
SPL 2.13.0000
GSM 02.19.21
is possible for you help me ?
thank you in advance and excuse me for my bad english, regards, mauro
... for exit from this situation I've removed and released the battery and
now the pda is blocked on "3 color bootup"...
http://www.badongo.com/file/3633747
the easiest way is flash it back to pdamobiz step1 u can flash it from the bootloader screen
after that flash it to any rom u desire
mauchit said:
Good Morning,
- on my Jamin I've installed HardSpl (operation all ok)...
IPL 2.13
SPL 2.13.0000
thank you in advance and excuse me for my bad english, regards, mauro
Click to expand...
Click to collapse
- with this information SPL 2.13.0000 Your HardSPL is unsucceses. ( SPL: G3.4DPA not 2.13.0000)
- If you flash ROM 6.1 without Hardspl device will stuck at bootloader ( tricolor)
=> flashing Romship ( or Step1, PV_temp ...) and hardSPL againt pls
Innova said:
- with this information SPL 2.13.0000 Your HardSPL is unsucceses. ( SPL: G3.4DPA not 2.13.0000)
- If you flash ROM 6.1 without Hardspl device will stuck at bootloader ( tricolor)
=> flashing Romship ( or Step1, PV_temp ...) and hardSPL againt pls
Click to expand...
Click to collapse
yes that's the problem and the exact solution
I think you mauchit are new here so (Step1, PV_temp) it also means back to WM5
thanks for your contributions,
but from the current situation (tricolor) as I go out?
what steps should I follow?
mostafa0007 reason you are, I'm new and not very experienced
mauchit said:
thanks for your contributions,
but from the current situation (tricolor) as I go out?
what steps should I follow?
mostafa0007 reason you are, I'm new and not very experienced
Click to expand...
Click to collapse
go and look @ the sticky post of mine... ^_^
Hello,
I followed your instructions which enabled me to get the pda, I returned to the original WM5, with:
IPL 2.13
SPL 2.20.000
GSM 02.47.21
OS 2.20.7.34
I rebuilt the steps to install HardSpl on pda, all went ok, but finished the procedure I find all equal:
IPL 2.13
SPL 2.20.000
GSM 02.47.21
OS 2.20.7.34
HardSpl therefore is not installed?
I tried all the files for HardSpl that I found on this forum always without success, the last that I have installed, and the procedure is finished ok, is this (ProphetSPLTool.zip x 3g) that I found here:
http://forum.xda-developers.com/showthread.php?t=401326
mauchit said:
Hello,
I followed your instructions which enabled me to g....
Click to expand...
Click to collapse
you may try to flash with " Lazy_Tool "
.....
dioxda2 said:
you may try to flash with " Lazy_Tool "
.....
Click to expand...
Click to collapse
I had already tried, I Try now, unfortunately, clicking twice on upgrade.cmd not open the program on the PC, I can not (on the pc I have windows xp) ...
mauchit said:
I had already tried, I Try now, unfortunately, clicking twice on upgrade.cmd not open the program on the PC, I can not (on the pc I have windows xp) ...
Click to expand...
Click to collapse
excuse if i ask silly questions, but its only to try and help. Wot exactly are the steps u did to hardspl? Did you interuprt the process or did ur device restart after hardspl? if you have followed the many good guides to get to hardpsl stage then u shuld not have problems? you have obv done aku2.2 b4 hardspl. i used Jesterz method and flashed his aku2.2 rom then hardspl, after 4 attempts it worked, try using different usb ports on ur pc/laptop, i had to try 3 out of 4 ports before it was sucessfull and remove all other usb cables from machine
I have tried in every way that I read on the forum xda but I could not install HardSPL on my jamin
mauchit said:
I have tried in every way that I read on the forum xda but I could not install HardSPL on my jamin
Click to expand...
Click to collapse
try this : http://forum.xda-developers.com/showthread.php?t=377904
Use Lazy tool. Download the full folder, remove any restriction on each program in the folder(unblock, read only etc). IF still doesnt work, open using command line. sure will work
Hi, i facing the same problem here:
IPL:1.00
SPL : 2.G3.4PDA
This mean i already on HardSPL, but how come i still not ablem to flash it to WM6... already try many ROM including jumpSPL. Manage to complete the flashing but after that it will stuck at Qtek screen...
timmymarsh said:
try this : http://forum.xda-developers.com/showthread.php?t=377904
Click to expand...
Click to collapse
I've tried, even with two different computers, but I can not to open the file Prophet Tools.exe and then I will not start with the procedure...
thank you four your suggestion...
rahulganatra said:
Use Lazy tool. Download the full folder, remove any restriction on each program in the folder(unblock, read only etc). IF still doesnt work, open using command line. sure will work
Click to expand...
Click to collapse
I've tried, with two different computers in every possible way, but I can not open the file Upgrade.cmd, and therefore does not start the procedure ...
anyway tanks for your suggestion ...
saints5354 said:
Hi, i facing the same problem here:
IPL:1.00
SPL : 2.G3.4PDA
This mean i already on HardSPL, but how come i still not ablem to flash it to WM6... already try many ROM including jumpSPL. Manage to complete the flashing but after that it will stuck at Qtek screen...
Click to expand...
Click to collapse
I think that if you have already configured 2.G3.4PDA pda you can install the new rom favorite ...
what problem have you exactly?
this post only for show pda and current configuration...
mauchit said:
I think that if you have already configured 2.G3.4PDA pda you can install the new rom favorite ...
what problem have you exactly?
Click to expand...
Click to collapse
The problem is, whatever ROM i tried, i will complete flashing 100% but it will stuck at Qtek screen forever...
If i flash back to shipped ROM, is end up ok, but no sound no camera.... why ? Somebody pls help....