Related
I got a bad LCD screen, but all other parts of the SX56 are in great condition.
I have a new glasstop / digitizer (not from the old xda), other online places ask for $70
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3081202906
And the mother board, works good, tested on another sx56.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3081212748
Later I will throw more stuff for sale, LCD back light, battery, cables, cardle...
will you be willing to ship the touch screen to the uk?... i just broke mine
Need help!!!
Smashed my LCD and orded a replacement from HK. The part number they sent me was 60H00037-00M. After installing it, all I get is a white screen. Sent it back and recieved another one with the same number and again the same deal!!!
The part number Im chasing is 60H00056-00m or TX0704APAA1. I think it is a mfg by Hitachi.
I cant find anything with this part number on the net and was wondering if anyone knows if there is an equivalent that could be used insted.
Mal..
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
teknics said:
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
Click to expand...
Click to collapse
Teknics, are yoy refering to the two incy wincy screws that fasten the ribbon to the d-pad at the bottom?
Mal..
Yes that cable, but also make sure the ribbon cable that slides into the locking connector on the main board is in properly also.
HK?????
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
sllabymkcus said:
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
Click to expand...
Click to collapse
HK refers to Hong Kong you can purchase screens and digitizers that i know of but as far as small inexpinsive electronics i think your sol. just out of curiousity did you manage to blow the speakers or what? i have played some pretty loud music through my hermes using mortplayer and have not managed to blow them yet.
I have 60H00056-00m or TX0704APAA1 LCD.
msn:[email protected]
I am looking for a TX0704APAA1 for my HTC Tytn.
Apparantly this is the Hitachi model other models are also available on ebay (Samsung and Toppoly). As I understand Samsung and Toppoly are not compatible with one another apparently they use different controllers.
As for the Hitachi I have know idea whether it is compatible with Samsung or Toppoly, which is why I am on my quest after the Hitachi...
Anyone know where I can get one?
I think this one might work.
http://cnn.cn/shop/8525tytn-screen-p-1704.html?osCsid=37d6ea546d0b93a035876bf59f229d3b
The 60h00032 or 60h00037 did not work on my dopod 838 pro.. I just got a white screen.
Does anyone know where i can get the lcd screen flex ribbon mine broke and i dont want to buy a whole new screen just for the cable. any help would be great.
stickjt said:
Does anyone know where i can get the lcd screen flex ribbon mine broke and i dont want to buy a whole new screen just for the cable. any help would be great.
Click to expand...
Click to collapse
Hi,
I am at the same position as you.
I trying to find a seller or supplier that ship the lcd flex ribbon (p4 cable) and i could not found anyone yet.
Also i know that even if you buy a new lcd screen the flex ribbon wont be part of the package. :crying::crying:
Someone please help us!!!
i too am looking for the same cable
OK guys, after digging a lot , (sending message all over the world, surfing the web, etc) i found a seller from ebay that can deliver the lcd flex ribbon for P7500 not the P710. But he is not sure that both use the same flex cable.
So we need to figure it this out.
See some picture about my cable attached (p7510), i believe the cable should be the same because both tabs are using the same LCD screen, right? the only big different is the 3G modem.
Hope someone could clear this out. :good:
Best Regards from Argentina
martocapo said:
OK guys, after digging a lot , (sending message all over the world, surfing the web, etc) i found a seller from ebay that can deliver the lcd flex ribbon for P7500 not the P710. But he is not sure that both use the same flex cable.
So we need to figure it this out.
See some picture about my cable attached (p7510), i believe the cable should be the same because both tabs are using the same LCD screen, right? the only big different is the 3G modem.
Hope someone could clear this out. :good:
Best Regards from Argentina
Click to expand...
Click to collapse
i believe thats the only difference from the p7510 and the p7500 ive used a p7500 digitizer on a p7510 so there defiantly compatible on parts do you mind sending me a link to the ebay seller
anyone?
ebay address for lcd ribbon
lost896 said:
anyone?
Click to expand...
Click to collapse
I bought mine, Cost [email protected] MuchBuy-Outlet store on ebay.
Dropped my s3 and cracked the screen at the bottom. Its just the glass bit, touch and LCD seem fine so the digitiser is ok.
Does anyone on here know anyone in the north east of England who is able to just replace the screen or recommend a repair by post service.
Been quoted prices of over 150 quid which seems very expensive as there is nothing wrong with digitiser.
I know I can buy the parts for about a tenner but I'm useless with things like this so would make it worse
DP4 said:
Dropped my s3 and cracked the screen at the bottom. Its just the glass bit, touch and LCD seem fine so the digitiser is ok.
Does anyone on here know anyone in the north east of England who is able to just replace the screen or recommend a repair by post service.
Been quoted prices of over 150 quid which seems very expensive as there is nothing wrong with digitiser.
I know I can buy the parts for about a tenner but I'm useless with things like this so would make it worse
Click to expand...
Click to collapse
Any good mobile repair shop should be able to just change the glass. Most will repalce the sealed unit of glass / Digitiset / AMOLED panel though. Just keep contacting mobile phone repair centres until you find one who will do it.
Know someone in North London I've used twice, £50 + postage and I was pleased with result.
Look up everymobile (IIRC) on ebay, London NW2.
If that's not right PM me and I'll find their name.
Sent from my GT-P6800 using xda app-developers app
I picked up a Nokia 920 with a cracked glass/digitizer for cheap. Everything else works fine and I always wanted a cheap way to try out a Windows Phone. But now I'm having an extremely hard time finding a good replacement digitizer. I need to replace it because the glass on these phones is so thick and sharp it'll actually cut fingers. Very different from most Android phones I've worked with. I've tried several different sellers on eBay and had no luck. The first one had a perfectly matching ribbon cable but the touch didn't work at all. The next two had a different chip placement on the ribbon cable and the touch worked, but the home and search button didn't, though the back button did.
I'm wary of trying yet another eBay seller because the last one took a month to refund me and tried endlessly to jerk me around. The digitizers on Amazon all have horrible ratings too or else I'd try one of them. Replacing the LCD as a whole unit isn't an option either because I read somewhere there were three different digitizers used on the 920 that are all identical except for slight differences in the chips on the ribbon cable. So a new display could possibly have an incompatible digitizer.
Does anyone know where to get a reliable digitizer that doesn't cost more than a whole phone? With 32GB on board, wireless charging and snappy response with WP8.1 I'd actually like to use this phone.
Hi, I bought for about 22 EUR a digitizer and AMOLED replacement which works for my Lumia 920.1. I will PN you the link.
Best regards,
Joachim